The last part is just a demo with LCD display . You can check my video on how to use LCD display for more details. With LCD display we need to use potentiometer to adjust contrast.
@ hash include electronics, Cool project, but if your friend is 30 degrees Celcius he is a rapidly cooling corpse. Is there way to correct the temperature offset?
Hello sir my lcd is not showing anything only blocks are available ....can you please help me ... I do the connection as you. Said in video please help me out to reach solution
@@hashincludeelectronics We have a problem with the measured temperatures as it is not the same with other Temperature scanner like the temperature gun. Comparing it, it has a 2 degrees difference. Like the Temp. Gun measures 36.4 the MLX measures 34.4. how can we add 2 to it?
@@fatsandoils at what distance do you use this sensor? Because it works and accurate only for short distance like within 5 cm or so . Try changing distance . I don’t think this sensor can be calibrated as such .
I suppose you are asking to use I2C adapter with LCD. Yeah you can use that but you will need to change the code for I2C and make connections Accordingly.
It’s just a display so you need to make sure you connect according to its pins . Also you need to make change in code for display . Other than display everything should be same and should work
I think this is the most underrated channel....
Thank you for your nice comment and support 👌🏻👍🏻
🤯🤯 it's like future technology
👍🏻👌🏻
Hello,
Why did you use a potentiometer in the end?
It was not mentioned in the list of components.
The last part is just a demo with LCD display . You can check my video on how to use LCD display for more details. With LCD display we need to use potentiometer to adjust contrast.
@@hashincludeelectronics Hello,
Thank you for replying.
The second part with the buzzer is not working for me.
Can you please help?
Why using ultrasonic sensor for temperature measurement sir?
That sensor is used to check if the hand is near the sensor or not . It’s not used to measure temperature. 👍🏻👏🏻
@hash include electronics can the lcd display have a decimal point for example 30. something.
Yes it can print that character too.
@ hash include electronics, Cool project, but if your friend is 30 degrees Celcius he is a rapidly cooling corpse. Is there way to correct the temperature offset?
Thanks for checking out the video 👍 I suppose you are asking if we can change the cut off temperature. Yes you can do that in the code.
Super👍
Thanks 🙏
@hash include electronics can the display on the lcd be marked with points.
Sorry I am not sure if I got your question correctly . Could you please explain more?
Hello. Can we use another sensor (AMG8833) with the codes you provided?
Sorry but I am not sure about this . Please check the product description and library to be used .
Hello sir my lcd is not showing anything only blocks are available ....can you please help me ...
I do the connection as you. Said in video please help me out to reach solution
Rotate the potentiometer.
Can we Use this sensor from 1 foot ? Distance between object
No we can not .
Can u make the temperature sensor with 20x4 lcd display?
I will see if I get 20*4 display . However you try yourself and I suppose it should be easy just like any other lcd display .
@@hashincludeelectronics does it work with 4 pins?
Please Provide Because Iam doing this project And I Want More Information about this project Because it's easy To Doing Project well
You need to get the details from video , code and diagram . That’s already provided and I can’t provide any other documents .
It's a great video👍. May I ask, what part of the code do I need to modify to work with Liquid Crystal_I2C? (I'm a newbie)
You can check the code at the end which I have provided using LCD but not I2C LCD. You can modify that code as per L2C lcd
I did the connections as per the circuit diagram but nothing is display on lcd??
Check the connections properly again for any loose connection. It should work . It’s really simple to use LCD .
Hello sir what are the code for using i2c adapter with display
Unfortunately I don’t have code for that .
Great video! Can it detect very high temperatures like 800°C?
Thank you very much for checking out the video 👍🏻. No it can not detect that huge temperature.
what's the maximum temperature that can be detected?
@ hash include electronics can work with Arduino Tinkercad?
Unfortunately I did not try that . You can give it a shot 👍🏻
Just you! Tell me how it works.
How do we calibrate this sir, so that it will be used for body temperature.
You don’t need to calibrate it . Just use it as it is.
@@hashincludeelectronics We have a problem with the measured temperatures as it is not the same with other Temperature scanner like the temperature gun. Comparing it, it has a 2 degrees difference. Like the Temp. Gun measures 36.4 the MLX measures 34.4. how can we add 2 to it?
@@fatsandoils at what distance do you use this sensor? Because it works and accurate only for short distance like within 5 cm or so . Try changing distance . I don’t think this sensor can be calibrated as such .
@hash include electronics does it work with I2C adapter?
I suppose you are asking to use I2C adapter with LCD. Yeah you can use that but you will need to change the code for I2C and make connections Accordingly.
@@hashincludeelectronics hello sir
What are the code and circuit diagrams using i2c adapter with display.
Please Sir Provide Some Information And Block Diagram, And Project Report
I have provided the code and diagram in the desorption of the video . You can create the necessary documents based on the full video.
But sir Block Diagram Is not given
Without Simulation This project will be work or not
Yes it will work if you make connections exactly as per video.
Thank you sir
How to Install Adafruit_mlx90614 in laptop
@@Aishwarya_06 check the video for steps 👍🏻
Sir please tell mee
Can you please share a project report regarding these videos
Sorry I don’t have any project report . If you create one using video, diagram and code , please share with others so that it’s useful for them too.
Reply please
Please refer any websites regarding these projects
@@showmyac5297 check my reply.
is the temperature in degree celsius already?
Yes in the code its already in degree Celsius. But you can read in Fahrenheit as well. please check the library function.
@@hashincludeelectronics I’ve tried detecting with human body, is that accurate?
@@whyrt11 yes
How Many Voltage of Potentiometer Is Used? in this Project
You can use 10k
Resistor
how many ohms of resistor is used?
Serial monitor not display the temperature?how?
Check the connections properly and select proper com port 👍🏻
What if i use 12c lcd and do this circuit
will it work?
It’s just a display so you need to make sure you connect according to its pins . Also you need to make change in code for display . Other than display everything should be same and should work
But i dont know to do codings bhaiya 😔
What should i do?
@@mralpha9980 try to learn coding . It’s not that difficult . Give it a try . 👍🏻
Ok bhaiya thanks
you are the best
Its working
i am getting nan in display of serial monitor please help
Make sure your temperature sensor is connected and working .
How to do the circuit if i use lcd 12c
I have not used I2C lcd. However it should be simpler because of less pins . Just check how to use I2C lcd display and make changes in the circuit .
Ok bhaiya
Thanks a lot
Sending into MySQl database. It is Possible.
It can be possible but need to check how it is done . I have not worked on it ever. Let us know if you find something on internet 👍🏻
Yes, it is possible. It has several contents that teach how to integrate a MySQL database with Arduino.
MLX09614 Temperature Sensor is Not In Any Software