FINALLY someone who explains how to navigate internal/external ports, and the importance of port-forwarding both routers when you have more than one. Especially the bit about «internal / external port» made no sense to me because my router has those terms, but none of the other guides I found showed these settings or explained how to handle it. You are a godsend!
This is by far the best port forwarding video i have ever watched and I've seen hundreds. Thank you so much. Now i can finally play with all my console friends online.
BRO THANK YOU!!!!! Thank god people like you exsist. i have been struggeling so much to fix it but its now fixed. THANK YOU SO MUCH!"!!!!!! Insta subbing
Once you do this port forwarding to open Nat and connect better. Do I have to shut off upnp? And if i do what happens to my phone and computer and everything else. Does that all have to be port forwarded or that will work fine still with upnp off? Upnp is just for gaming? @TroubleChute
@TroubleChute Please let me know if this is safer then UPNP. I think this method is safer. Also i want to know if i have open already just from doing the router, can i leave the firewall alone? the game is allowed through. Should i add the ports to the firewall also? it stays open either way, But i feel better faster connection when i do the firewall also. I just havent done it bc I want to know if its safe. Please Lmk
Thanks for this video, but I need a little help: I'm connected to internet through a 5G connection with an external router (Zyxel NR7101). Inside my house, to effectively connect my devices to internet, I have a Zyxel Multy system in bridge mode. Should I have to open ports on both devices or only on the main external router? Thanks!
when i go to do the 27036-27037 TCP port it wont let me because its saying the entry already exists or is occupied, im guessing its coz ive done the 27000-27036 port for TCP/UDP already?
Hello Mr. TroubleChute, I have a problem i'd like to know if you can solve it or no. since forever and COD have a problem when 2 PC in the same house/network want to play where it connect one, but not the other. do you know how can we fix that!
same here. Were you ever able to fix? It is insane my son has to switch to xbox so he can play MW3 with me as we cannot connect at the same time when both on PCs.
Hi, is your servers through Battlenet, or Steam? and what reference did you use for the ports? I just wanna add, i can not find any reference, for TCP:3075. as far as im aware mate, when you have two devices in the same household. you can open ports on multiple devices, by giving them an unused port for the local/internal port, So Device one = int: 3074 - ext: 3074 / Device two= int:3075 - ext:3074 and so on, by giving it an unused internal port(or range) you can open ports for mutliple devices. i dont even know where you got 3075 from, so reference please? I like your stuff, but without a reference from activision themselves for the ports the server is using i dont think 3075 is nessesary for one device, unless they changed it but i doubt it because thats how they originally port forwarded two devices or more in the same household
Do you think you could point me in the direction of the correct *official* ports for mw3 and warzone? I noticed as well that every list of ports I’ve seen is always different from the last and now idk which is the right ones haha
I'm having some trouble getting my NAT type open with your guide. For some reason, my router doesn't allow me to do a range of ports under Int. ports like yours. I only get one box. So, for example: I can't do the range from 27000 - 27036 like you did under int. I am able to do it under Ext. ports just like you did. I've tried both the start number and the ending, but no luck. I called my ISP and they weren't able to help either....
Hey dude maybe a dead thread but this is a MEGA common problem with TPLink routers. even my cracked archer AX6000 router has same weird problem. for me it wont accept ranges in the internal only the external. all you have to do for TPlinks is leave the internal port box blank and save the rule and it will automatically fill it with your external range u entered. obviously i know this only applies to TPlink routers but i found this on a reddit thread and it saved me hours of head scratching
Thanks for the reply, but I've already tried that... It just gives me an error when I leave the box blank and says: "Incorrect data entered. Please correct marked fields". I contacted my ISP and they couldn't even help me. Buying a new router seems to be my only solution @@byronlefevre8266
For multiple devices playing cod on the same network, you should be enabling UpNp on your router ONLY! If your router does not support it, then portforward it, but do NOT do both.
Hi, I would like to know if I can do these steps while using a Network Switch. Basically, my connectien is as follows: Router to Switch via LAN Kabel and from Switch to PC via LAN Kabel. Would really appreciate your answer. Thanks
i couldn't find my wifi website.. it only shows me there products. can you help me find it and how to change the Realtek Gaming 2.5GbE Family Controller wifi port please?
Son recenty got a PC and we cannot play together on MW3. Whoever logs in first gets in and then the other logs in and it disconnects from server. When he is on his xbox series x and me on my PC we can play together no issue. My nat is open and so is his on PC. Any thoughts on how we can make this work? I am wired and he is wifi.
My router only lets me forward one port, so when I went to check my nat type it didn't change. I went to the port triggering tab and that still didn't work.
I followed the instructions for setting rules in my firewall and it worked when I booted up the game. However the next time I came to boot the game the NAT was back to Moderate. I've tried disabling and enabling the rules but they made no difference, any advice? Thanks.
You will find the ports used in this guide on the activision port forwarding guides, and a hundred or more other articles explaining the same process (aside from the command shell prompts he shared, but all of the instructions of the prompt are standard executions which are safe). Don't do it if you don't trust it, but there's nothing here that can't be found in a million other places.
I'm done. Tried everything I could find and i'm still getting disconnected everytime I open the game, the only way I found to bypass that is to use a VPN. Fuck Activision.
![Lil Uzi Vert - We Good [Official Audio]](http://i.ytimg.com/vi/DrSfBULAsek/mqdefault.jpg)
FINALLY someone who explains how to navigate internal/external ports, and the importance of port-forwarding both routers when you have more than one. Especially the bit about «internal / external port» made no sense to me because my router has those terms, but none of the other guides I found showed these settings or explained how to handle it. You are a godsend!
This is by far the best port forwarding video i have ever watched and I've seen hundreds. Thank you so much. Now i can finally play with all my console friends online.
This Helped me go from Moderate to OPEN.. thanks!!
what metod ?
Thank you so much it did work from moderate to open 🙌🏽 I was brining my head on the ports I had to create one by one 😂
Worked for me. Thank you.
BRO THANK YOU!!!!! Thank god people like you exsist. i have been struggeling so much to fix it but its now fixed. THANK YOU SO MUCH!"!!!!!! Insta subbing
Once you do this port forwarding to open Nat and connect better. Do I have to shut off upnp? And if i do what happens to my phone and computer and everything else. Does that all have to be port forwarded or that will work fine still with upnp off? Upnp is just for gaming? @TroubleChute
Followed all of the steps still on a moderate nat
Same
same im on strict gey.
call your ISP and ask them about CGNAT
Worked for me, august 2024 💯
Thank god you ran through this in warp speed. I would’ve hated to understand this the first time I watched 🤷🏻
0.5 speed then
Thanks buddy. Works like a charm.
Thank you, legend
This worked and got me to open nat type in 2024. Thank you so much!
Powershell commands are wrong for UDP. Change $tcpPorts in the script to $udpPorts on the UDP part. otherwise, works fine.
legend that worked for me, thanks!
Very good thanks 🙏
THANK YOU !!
The port for 27036 - 27037 doesn’t let me input, (error: port range overlap). Any clue?
Any fixes?
Ty beautiful man!
Thanks bro!!
@TroubleChute Please let me know if this is safer then UPNP. I think this method is safer. Also i want to know if i have open already just from doing the router, can i leave the firewall alone? the game is allowed through. Should i add the ports to the firewall also? it stays open either way, But i feel better faster connection when i do the firewall also. I just havent done it bc I want to know if its safe. Please Lmk
NICE it worked thanks man👍👍👍👍
Thanks for this video, but I need a little help:
I'm connected to internet through a 5G connection with an external router (Zyxel NR7101). Inside my house, to effectively connect my devices to internet, I have a Zyxel Multy system in bridge mode.
Should I have to open ports on both devices or only on the main external router? Thanks!
when i go to do the 27036-27037 TCP port it wont let me because its saying the entry already exists or is occupied, im guessing its coz ive done the 27000-27036 port for TCP/UDP already?
Hello Mr. TroubleChute, I have a problem i'd like to know if you can solve it or no.
since forever and COD have a problem when 2 PC in the same house/network want to play where it connect one, but not the other.
do you know how can we fix that!
same here. Were you ever able to fix? It is insane my son has to switch to xbox so he can play MW3 with me as we cannot connect at the same time when both on PCs.
Great guide thank you
Great video.
Hi, is your servers through Battlenet, or Steam? and what reference did you use for the ports?
I just wanna add, i can not find any reference, for TCP:3075. as far as im aware mate, when you have two devices in the same household. you can open ports on multiple devices, by giving them an unused port for the local/internal port,
So Device one = int: 3074 - ext: 3074 /
Device two= int:3075 - ext:3074
and so on, by giving it an unused internal port(or range) you can open ports for mutliple devices.
i dont even know where you got 3075 from, so reference please?
I like your stuff, but without a reference from activision themselves for the ports the server is using i dont think 3075 is nessesary for one device, unless they changed it but i doubt it because thats how they originally port forwarded two devices or more in the same household
Do you think you could point me in the direction of the correct *official* ports for mw3 and warzone? I noticed as well that every list of ports I’ve seen is always different from the last and now idk which is the right ones haha
are the powershell commands for just steam ports or pc ? they have a few more on the chart on website for pc vs steam
I'm having some trouble getting my NAT type open with your guide. For some reason, my router doesn't allow me to do a range of ports under Int. ports like yours. I only get one box. So, for example: I can't do the range from 27000 - 27036 like you did under int. I am able to do it under Ext. ports just like you did. I've tried both the start number and the ending, but no luck. I called my ISP and they weren't able to help either....
Put ur router in DMZ and u will get an open Nat.
Worked for me! Thanks 😀@@Benham1
Hey dude maybe a dead thread but this is a MEGA common problem with TPLink routers. even my cracked archer AX6000 router has same weird problem. for me it wont accept ranges in the internal only the external. all you have to do for TPlinks is leave the internal port box blank and save the rule and it will automatically fill it with your external range u entered. obviously i know this only applies to TPlink routers but i found this on a reddit thread and it saved me hours of head scratching
Thanks for the reply, but I've already tried that... It just gives me an error when I leave the box blank and says: "Incorrect data entered. Please correct marked fields". I contacted my ISP and they couldn't even help me. Buying a new router seems to be my only solution @@byronlefevre8266
@@byronlefevre8266 big up, have a TPLink router and was wondering why they don't just do ranges....there's no problem with them implementing it
For multiple devices playing cod on the same network, you should be enabling UpNp on your router ONLY! If your router does not support it, then portforward it, but do NOT do both.
hi there, my router is asking me for a service type ( FTP, HTTP ... ), any clue wut to choose ?
Hi, I would like to know if I can do these steps while using a Network Switch. Basically, my connectien is as follows: Router to Switch via LAN Kabel and from Switch to PC via LAN Kabel. Would really appreciate your answer. Thanks
i couldn't find my wifi website.. it only shows me there products. can you help me find it and how to change the Realtek Gaming 2.5GbE Family Controller wifi port please?
Very useful
My router doesn’t have option for port forwarding? I’ve looked it up and some claim it uses “virtual servers” to port forward?
What if your router only allows you to input a certain amount of ports and not all of them can fit?
How did you customize your start menu like that?
nat type went from moderate to open but game still packet bursting , extrapolation , and latency variation lagging , game not playable 😢
does this work for xbox im so confused because my mwiii has been lagging and freezing all over the place
I must be blind... I do not see that copy and paste section for that description - Note: Not an avid RUclips user either
Son recenty got a PC and we cannot play together on MW3. Whoever logs in first gets in and then the other logs in and it disconnects from server. When he is on his xbox series x and me on my PC we can play together no issue. My nat is open and so is his on PC. Any thoughts on how we can make this work? I am wired and he is wifi.
Did you fix this problem? I have it too
Yo i followed everything and im still on strict, nat type 3😢
can someone help who has att i dont have internal port or external port
i have base port and global port range
How do you do this if you have multiple PC's in the same house (on the same router) playing?
I am also having this issue where mutiple PCs cant connect to servers from the same network
@@barrymccaulkiner4232 In prev titles, its to do with 3074, the main port, change the internal/local port to a random port thats not in use
Any luck fixing. Having same issue.
did everything by the book, the game stays on moderate nat :(
It actually worked for me
Slow down speaking - aside from that this actually worked and is very appreciated.
NAT type open but now I have wildly fluctuating latency and between 1-3% packet loss cosntantly... What gives?
exactly the same as me
My router only lets me forward one port, so when I went to check my nat type it didn't change. I went to the port triggering tab and that still didn't work.
Not working. Still moderate NAT in MW3. But Vanguard I have open NAT.
Thanks you saved me
Nice
Ye small issue... IT DOESN'T WORK and I'm losing my mind over it. I've no idea what's going on
i tried everything (enable ports on my router and pc, enable UPnP, i even tried to enable DMZ )but still no change in my NAT type. any other tips?
same
@@Nyxia-sfound a fix?
found a fix?
@@Jorgeee no
work with warzone too? righ
what windows are you using?
i followed the same ports and have OPEN NAT now but i have constant packet loss of 10% every game? any ideas how to fix this?
yeah, uninstall the trash game and never play it again. Hope this helps
Bro can you make a video for mw3 warzone
В современных роутерах есть UPnP, изра сама открывает нужные порты и никакие манипуляции делать не требуется
This works
I have bandwidth 4212900 is taht bad?
This worked great, but after the game updated it says moderate once again.. dumb game.
Hi everyone, I don't know why it doesn't work for me? I tried the methods and none works.. HELP PLEASE
What about warzone 3 port forward??
I followed the instructions for setting rules in my firewall and it worked when I booted up the game. However the next time I came to boot the game the NAT was back to Moderate. I've tried disabling and enabling the rules but they made no difference, any advice? Thanks.
me too!
Me too smh
Did you open the ports in the router?
Eventually yeah, I got around to being brave enough to give that a go. Fixed the issue and my NAT stays open.@@T1Earn
I have this same issue
It won't let me use the last one, help needed?
No dice for me, stuck on moderate for the mw3 beta.
same here... Won't get off Moderate.
lan side tcp/udp port ??
how i can do it if i have 3 pcs gamers?
What about in console?
What is port forwarding?
Where did you get this info from, I don't want to be hacked
You will find the ports used in this guide on the activision port forwarding guides, and a hundred or more other articles explaining the same process (aside from the command shell prompts he shared, but all of the instructions of the prompt are standard executions which are safe). Don't do it if you don't trust it, but there's nothing here that can't be found in a million other places.
Hi will this work if my NAT type is strict
yes
is this for real? why is call of the duty the only game we need to do this on
Can you please tell whats the benefits of an open nat and port forwarding to the router directly. Thank you
support.activision.com/articles/port-forward-and-nat-faq
tldr: "Ultimately, an Open/Type 1 NAT will provide the best connection quality."
@@TroubleChutethank you ♥️
Ever feel like u turn a corner, and u due instantly, but on the kill cam the dude is shooting u for 5 seconds? Looks like u need open Nat
hiya, how do we.. undo this? thanks
Start -> Windows Fire Wall -> Ingoing Rules / Outgoing Rules -> Find MW3 Rule -> delete
how to revert please
Start -> Windows Fire Wall -> Ingoing Rules / Outgoing Rules -> Find MW3 Rule -> delete
doesnt work... stays on moderate, waste of time
Can you please explain PowerShell do I need to do that in order to port forward?
He don't give a shit about you as you can see, just unfollow him and follow somone else.
it automatically creates rules in the firewall so you don't do that manally port by port :) he explains it in the intro
It’s not working
it did not work. access was denied
sadly my router wont let me add more than one port forward its so fucking annoying
i put this video at .5 speed because ur going way too fast cant even understand what ur saying
hello asus modem help me bro
plss
Can you describe what this does?
support.activision.com/articles/port-forward-and-nat-faq
tldr: "Ultimately, an Open/Type 1 NAT will provide the best connection quality."
Nope still Nat type 2
Wtf not from the box😢
I'm done. Tried everything I could find and i'm still getting disconnected everytime I open the game, the only way I found to bypass that is to use a VPN.
Fuck Activision.
Most inconsistent imbalanced cod I’ve ever tried.
WM3 will no longer load completely
Is there a undo or reset option rather play on moderate then not at all
My Xfinity went from 1.4gb to 120mb thanks bro
💀
There to many camper and to many cheater
Trash guide. Didn’t work. Followed every step correctly
$tcpPorts = '3074', '3075', '27015-27030', '27036-27037'
New-NetFirewallRule -DisplayName "MW3" -Direction Inbound -Protocol TCP -LocalPort $tcpPorts -Action Allow
New-NetFirewallRule -DisplayName "MW3" -Direction Outbound -Protocol TCP -LocalPort $tcpPorts -Action Allow
$udpPorts = '3074', '4380', '27000-27036'
New-NetFirewallRule -DisplayName "MW3" -Direction Inbound -Protocol UDP -LocalPort $udpPorts -Action Allow
New-NetFirewallRule -DisplayName "MW3" -Direction Outbound -Protocol UDP -LocalPort $udpPorts -Action Allow
chatgpt pointed out the error in the original: localport was tcp under udp class set, above is the correct instructions.
I’m I’m
Helped me from Moderate to Open, thanks!