How To Repair PVC Sprinkler Pipe; Glueless Coupling & Slide Fittings PVC-Lock®
HTML-код
- Опубликовано: 27 сен 2024
- www.hydrorain.com/
How to repair a broken pvc sprinkler pipe using push fit fittings from PVC-Lock. Learning how to repair sprinkler pipe breaks, sprinkler head, funny pipe, elbow. How to repair a sprinkler using no harmful solvents. How to repair a sprinkler tee using push fit slide repair fittings from PVC-Lock.130308)
cool idea and it works because it's a low fluid pressure system?
I bet those are more expensive than regular glued fittings. Now for a small Crack like that you can also use a 1/2 pipe which snaps over the Crack. This one also used with glue.
The slip fix has to be fully extended when making any line repair,water hammer will occur if installed incorrectly.
And on the video, it was not the case?
Irrigator Team Members Love PVC-Lock by Hydro-Rain
Great video. Where did you get your beveling tool?
These fittings are at least $3- pc and you can do this fix with four elbows and a piece of PVC for may be $1.20
Sajid Rafique True. However the 4 elbows method would create a substantially higher amount of friction loss.
Every join creates a pressure/flow loss.
I just used PVC-lock to repair a 3/4" sprinkler line that was buried under two 1" lines. It worked amazingly! a difficult repair was done in minutes and no leaks (I left it uncovered while I ran my sprinkler lines on and off throughout the day to adjust sprinklers and repair a couple of sprinkler heads just to make sure). I made sure to push all fittings completely in. Thank you so much!
I've found the slide coupling leaks and I wouldn't recommend them for your supply line into your valves. With 3/4 and 1" pipe.