Thank you man! I think on your last go you where more persistant and took faster strokes for a longer period of time. I found this works the best also. Thanks for good tutorial :)
Such awesome videos, I haven't managed to start a fire yet but I'm definitely getting smoke. I think my issue is I was cutting them both in a V shape and the stick just ends up cutting through the wood.
I also often experience problems like this. It is possible that the wood had thick sap while it was still alive. There is a possibility that the ditch may crack when rubbed, allowing dust to enter it. Try using a U-type stick and give it a v-notch tip, so that friction dust doesn't go to waste. Always make sure the end of the stick and the fireboard gutters are not deep
i tried forever with a bow drill .then i found out that i was using the wrong wood in my area dead standing sicamore is best after that it was fairley easy.
@@DalemGumino There is a type of wood available locally that I have been unsuccessful in making a fire plow fire. I have succeeded with other types of wood, but not this particular local wood. Using your method in this video, I was successful! Reshaping the plow after each try, so that it doesn't cut a deep, narrow groove was key. Also, I kept reusing the burnt wood powder.
Banyak bang,senu,waru,dadap,beringin,loa,masih banyak lagi. Dari masing masing kayu mempunyai kekerasan berbeda Cek jg vid lain dari saya Dan sesuaikan dengan berat badan di masing masing kayu percobaan.🙏👊🔥🔥🔥🔥
The wood is rather hard and the friction powder breaks when I rub it. The finer it is, the denser the collected dust will be. Type U, usually I will experience a fast deep ditch.
Отверстия будут блокировать циркуляцию воздуха.Фрикционная пыль в середине траншеи тоже нехорошо.Постарайтесь держать фрикционную пыль над доской.Наконечник палки с зазубринами уменьшит отбрасывание фрикционной пыли в стороны
I also experienced the same thing as you. And I'm trying to change that. How to hold the stick, the diameter of the stick's eye, the slope of the stick's eye. Body position, with body position we will get pressure accompanied by friction. Quality of wood. I don't use very hard wood, brittle, resinous, starchy. It burns at a higher temperature
Gampang,asalkan dengan cara yang benar.. Video ini menggunakan kayu yang keras Tahapan demi tahapan /seandainya gesekan pertama blm berhasil dan di lakukan ke gesekan berikutnya Intinya jangan putus asa Silahkan cek video yang lain Cuma 12 sampai 15 detik sudah jadi bara
My man's a machine! Awesome!
Thank you so much Brother
Always awesome fire starting vids from you as usual! This time I noticed also the knife you carry, it looks handmade. Any vid about?
Sorry I don't have a video about making it.
Hopefully I have a chance about it
Thank you man! I think on your last go you where more persistant and took faster strokes for a longer period of time. I found this works the best also. Thanks for good tutorial :)
You're welcome!
🙏👊🔥🔥🔥
Such awesome videos, I haven't managed to start a fire yet but I'm definitely getting smoke. I think my issue is I was cutting them both in a V shape and the stick just ends up cutting through the wood.
I also often experience problems like this. It is possible that the wood had thick sap while it was still alive. There is a possibility that the ditch may crack when rubbed, allowing dust to enter it.
Try using a U-type stick and give it a v-notch tip, so that friction dust doesn't go to waste.
Always make sure the end of the stick and the fireboard gutters are not deep
i tried forever with a bow drill .then i found out that i was using the wrong wood in my area dead standing sicamore is best after that it was fairley easy.
Mantap,sukses sllu jix👍👍👍
Terimakasih bro 🙏🔥🔥🔥
Master pengendali api, jossss
Im loving the x2 ffw function 🤣🤣🤣😭☝️😭🤣🤣🤣🔥 awesome 🍀
I appreciate you
Thaks🙏👊🔥🔥🔥
Nice man 👏👏😘
Thank you brother,🙏👊🔥🔥
What is the reason you had to try three times? Was it to dry out the wood? Or, collect more wood dust?
Like what you said
@@DalemGumino There is a type of wood available locally that I have been unsuccessful in making a fire plow fire. I have succeeded with other types of wood, but not this particular local wood. Using your method in this video, I was successful! Reshaping the plow after each try, so that it doesn't cut a deep, narrow groove was key. Also, I kept reusing the burnt wood powder.
@@hyoklee3297 That's a good thing
Mantap , jenis kayu apa sja yg bisa dibuat bgni bang?
Banyak bang,senu,waru,dadap,beringin,loa,masih banyak lagi.
Dari masing masing kayu mempunyai kekerasan berbeda
Cek jg vid lain dari saya
Dan sesuaikan dengan berat badan di masing masing kayu percobaan.🙏👊🔥🔥🔥🔥
Fantástico!?
Nice, that's great.
Thank you so much.
I appreciate you
🙏👊🔥🔥🔥
So the stick you're using has a W type of groove in it, what about the base? is it the same or more of a U shape?
The wood is rather hard and the friction powder breaks when I rub it. The finer it is, the denser the collected dust will be.
Type U, usually I will experience a fast deep ditch.
Is it same type of woods u usemyfren? Cool
The same wooden planks and sticks. The wood is of the same type as african tulip. I cut and split it into boards and sticks.🙏👊🔥🔥🔥
Что если в конце делать ямку куда будет заполняться пыль? Так она не будет по сторонам пропадать в пустую.
Отверстия будут блокировать циркуляцию воздуха.Фрикционная пыль в середине траншеи тоже нехорошо.Постарайтесь держать фрикционную пыль над доской.Наконечник палки с зазубринами уменьшит отбрасывание фрикционной пыли в стороны
Great🤩
Thank you so much👊🙏🔥🔥🔥
i got dust. No Smoke or Embers.Barely got hot. I tried for 30 minutes. What on earth did I do wrong??
I also experienced the same thing as you.
And I'm trying to change that. How to hold the stick, the diameter of the stick's eye, the slope of the stick's eye.
Body position, with body position we will get pressure accompanied by friction.
Quality of wood.
I don't use very hard wood, brittle, resinous, starchy.
It burns at a higher temperature
Nice
Thank you so much🙏👊🔥🔥🔥
👍👍
😁👊🙏🔥🔥🔥
Salam kenal paman ,, hihihi
Yeah abang,😁😁😁
Salam bang 😊👊🙏🔥🔥🔥
Mantap boskurrr
Trmks🙏
Mantappp...
Suksme bli🙏👊🔥🔥🔥
Mantap semeton
Suksme🙏👊🔥🔥🔥
Mantap
Terimakasih🙏🙏🙏
Susah ya bli cara ini?
Gampang,asalkan dengan cara yang benar..
Video ini menggunakan kayu yang keras
Tahapan demi tahapan /seandainya gesekan pertama blm berhasil dan di lakukan ke gesekan berikutnya
Intinya jangan putus asa
Silahkan cek video yang lain
Cuma 12 sampai 15 detik sudah jadi bara
@@DalemGumino siap bli👍
Adelgaza más la punta calienta más rapido