Splash Paints and Fire Scale Models have phenomenal products. I use pipettes to measure the clear and hardner. It helps with waste. Would be nice if the clear came in a bigger bottle.
@@olezippi fair enough. I like the Splash Paints 2K Clear, but I have been trying Fore Scale Models, if ou haven't you should give them a try, and haven't been disappointed. I like FSM 2k cause it does add in a thinner o the mix so it seems to have a better flow. Splash Paints 2k tends to be thick, although it does have a beautiful luster and it does dry smooth.
Yeah, love going to the second-hand stores. I'm on the look out for an old candy press that I can restore but I think they may be out of my pay grade. Thanks man. Yup, 20-21 psi worked out fine for me.
Laquers like splash and scale finishes dry in minutes and really do cure in about an hour. I wait an hour between primer and paint, another hour between different colors if I'm going to do stripes or 2 tone. And then an hour before clear. I could never go back from lacquers. Another tip, you can add a tiny bit of Mr. Leveling thinner and it will self level even better. Paint job looks great!
Thanks Justin. The lacquer paints do have a lot of advantages and look so nice. I'll be airbrushing more of the lacquer paint so I need to get a respirator. Any recommendations?
@@olezippi I run a 3M 6000 series respirator, I swapped the standard 6001 filters out for 60923 filters. They are a P100 grade filter that 3M's support advised would better protect against 2K clear. Better safe than sorry.
57 is looking kewl Zippi and thats a sweet find i dig old plates myself and looks like your better half scored as well😁🤩scooter😎ps have a great weekend 🤗
![Eminem - Fuel (feat. JID) [Official Lyric Video]](http://i.ytimg.com/vi/t5H_CewqpKA/mqdefault.jpg)
Clear looks nice buddy, it's cheaper in the long run to buy a quart of automotive 2K clear and harder, 😎👍
I hear ya man. I'll have to Check and see what automotive clears are out there.
She came out great. Thanks for sharing. 👍👍👍
You bet Buddy. Thanks for watching.
Looks great!! Im gonna have to try that Splash Paint when i start airbrushing!! Thanks Zippi!
Much obliged. Yup, this paint is nice.
Well that turned out pretty slick. I am not a fan of the color red but when it looks like that who can argue. Splash has some great stuff.
Thanks man. Yeah, turned out pretty nice.
Splash Paints and Fire Scale Models have phenomenal products. I use pipettes to measure the clear and hardner. It helps with waste. Would be nice if the clear came in a bigger bottle.
Yup, I kinda knew how much clear to mix up as I do the same with the acrylic paints I use.
@@olezippi fair enough. I like the Splash Paints 2K Clear, but I have been trying Fore Scale Models, if ou haven't you should give them a try, and haven't been disappointed. I like FSM 2k cause it does add in a thinner o the mix so it seems to have a better flow. Splash Paints 2k tends to be thick, although it does have a beautiful luster and it does dry smooth.
Nice score on the license plate Zippi! The 57' paint looks gorgeous! 😎👍
Thanks Buddy. Yeah. I'm diggin the plate.
Looks great! Can’t wait to see the final results.
Me too! Thanks for watching.
Love that license plate, and the 289 part too! The 57 turned out awesome, Zippi! Can't wait to try splash paints!
I'm liking the license plate also Will. Yup, you gotta try Splash Paints.
It does have a depth of richness that reminds me of the lacquer paint on a ‘76 Eldorado I used to own.
It does John. The lacquers just have a different look to them. This is my go to paint for now.
I'm like you. I love going to second-hand stores to see what I can find.
That 57 looks fantastic!! I also set my compressor to 20-21psi
Yeah, love going to the second-hand stores. I'm on the look out for an old candy press that I can restore but I think they may be out of my pay grade. Thanks man. Yup, 20-21 psi worked out fine for me.
That looks great, Zippi! Awesome color, awesome job!
Thanks a bunch Eric.
Nice spoon test and it lays down nicely on the model.👍
Thanks David. It layed down really nice.
The paint looks great. Thanks for sharing.
You bet Michael. Thanks for the visit.
That paint is kicker!!! awesome job!
Thanks man. It maybe a little To shiny for some builds. I like the old school lacquer look.
Cool Plate sir show it to us when you get it all painted up and the paint on the 57 looks very nice well done
Thanks man. Just picked up some orange paint for the plate and a 3M respiratory since I'm spraying lacquer paints now.
Laquers like splash and scale finishes dry in minutes and really do cure in about an hour. I wait an hour between primer and paint, another hour between different colors if I'm going to do stripes or 2 tone. And then an hour before clear. I could never go back from lacquers. Another tip, you can add a tiny bit of Mr. Leveling thinner and it will self level even better.
Paint job looks great!
Thanks Justin. The lacquer paints do have a lot of advantages and look so nice. I'll be airbrushing more of the lacquer paint so I need to get a respirator. Any recommendations?
@@olezippi I run a 3M 6000 series respirator, I swapped the standard 6001 filters out for 60923 filters. They are a P100 grade filter that 3M's support advised would better protect against 2K clear. Better safe than sorry.
License plate looks cool and glad you like Splash Paints I love that paint
Thanks man. Yup, Splash paints are my go to paint for now.
That does look great! Nice color too.
Much obliged Billy.
Looks beautiful. Great job
Much obliged man. Thank's for coming by.
great looking paint job zippi.
Thanks 👍
57 is looking kewl Zippi and thats a sweet find i dig old plates myself and looks like your better half scored as well😁🤩scooter😎ps have a great weekend 🤗
Thanks 👍 yeah, we both scored pretty good.
I need to weather my show plates for the Blumo. I was thinking of tossing them in the dirt then dullcoating them.
That'll work man. Post a video when you get done with them.
Got to try that paint one day once our Canadian dollar goes up
I've been using them for a while and love their products.
This was my first time using Splash Paints and I will use it again.
I hear ya.
I'm salivating over that 57!
Thanks man. Now, if I can just get through all the bmf.
Looks great!
Thanks Alan.
Looking Good! I've got to try that paint out.
Thanks. Yup, it sprays out nice.
Looking good Brother Zippi 😎👍🇺🇸 I love SPLASH PAINTS!
Thanks Jimmy. Yup, Splash Paints are Bitchin.
Paint looks great!
Thanks dude. I'm a happy camper with how it turned out.
Beautiful work brother!
I appreciate ya Brotha.
@@olezippi yw brother!
Looks great buddy. 👍
Thanks Steve. This is some awesome paint.
That paint looks awesome
Thanks Don. I appreciate ya stopping in.
Those Old License Plates Are Great .And They Are Heavy Too. I Like The # 289- 055 Cool # Show It To Me When It Is Painted.
Yeah, I like the old plates Jim. The lady gave me this plate. Haha...I like the number. I'll show the finished plated in one of my videos.
Jim, I got the two wooden signs you made for me for my Birthday. They are so Kewl. Thank's much Buddy.
The 57 is looking good Zippi
Thanks Woodman. Thanks for making the tripto watch.
Paint looks amazing zippi ❤😊
I appreciate ya Buddy. Thanks for coming by.
Came out real nice
I'm a happy camper on how it came out. Thank dude.
Looks quite good, this 2k doesn't seem to have the thickness issues of 2ks meant for 1:1 cars.
Thanks. Yup, worked fine for me.
It looks sweet, brother, cool plate too ✌️😁
Much obliged. I appreciate ya coming by.
Nice 😁
Thanks Daniel.
@@olezippi your welcome 😁