Who are you?! You're such an angel to community, for humanity. Thank you. I just busted my hubby's ignition on the trip to the paint store today. If I can fix it before he comes home, I will have a story at the very least. ;-) I love building and fixing. Did I mention that you're absolutely amazing?!
Thank you for taking the time to make this video. I followed your procedure and it took me 15 minutes to remove/replace the ignition lock cylinder, which allowed me to start and drive my truck.
Excellent instructions, sir. I followed your video exactly and was able to remove and replace the ignition lock cylinder with no problems at all. Thank you!
Drilling the push button I could not think of. Thank you. I will try. I spent all day trying to get it out. ------- one hour later---- It worked!!!!! Thank you!!!!!
Really great video! I found others that weren't nearly so specific - particularly showing the little hole where the lock needs to be drilled out. Thanks so much!!!
Great video. I watched it, giggled the key and managed to get it into the accessory position. I disconnected the battery and bought a new switch. I had it installed in 20 minutes. The video even tells you what socket to use and where the bolts are. The only tricky thing was the light ring, it popped off and I had a bit of an issue aligning it, but still managed. I loved the fact that this was for my exact vehicle, but probably works with many others. The pin he's drilling out is an anti-theft device.
Hey man just wanted to tell you thank you. My truck was broken into last week some A hole decided to destroy my ignition. after watching your video I popped in a new one no problem drilled out the old one got everything to work truck started right up. Just wanted to tell you thank you.
Best video to put the ignition lock cylinder in with. My vehicle is a 2003 Toyota Highlander. Made changing so easy. Just follow instructions and you can't go wrong if you have the correct cylinder. Thank you
Thank you so much for your video. I did it in no time and I still can't believe how simple it was thanks to your great instructions! You broke it down amazingly well.
Orale , este es uno de los videos que ensenan lo mejor que se puede paso por paso, como dice el dicho, Mas claro no canta un gallo te felicito, estamos teniendo un problema identico y estoy seguro lo vamos a resolver, gracias.
thanx for the videos man, great info, i started learning as a locksmith years ago, basically on older cars without smart keys and transponders stopped round about 1995,i recently lost my job on the refinery, decided to use my money that is due to me for buying the xhorse dolphin and the accessories going with it, to start a small business and getting back into the game, in the old days i was going to try and pick that toy ignition to acc, to press that button in, and pull the cylinder out, once that's done i was gonna strip that cylinder down to the barrel ,then hand file the key ,rough up the blade a bit to where if you put a bit of pressure on the brass slide it makes a mark where your cut should be, then file that mark until the slide is level with the barrel, do eac one and then do the other side, eventually flipping the key around in the barrel to mirror the other side that's how i learned to make keys for the first two years with hand and file, after that i went to guide keys or depth keys didn't touch a cutting machine for three years when i started learning the trade
hi, is it possible that i could email you, and could you pls give me your email , iv got a question on a certain topic that i don't realy understand pls man thanx
Fine video. Last night I could not get my 1998 Toyota Rav4's key to turn to the ACC position. I made many attempts. In the past I have fully removed the igition lock/switch assembly, so I repeated this chore today. Then I went at the button with the drill, as shown in the video. I started with a 1/16-inch titanium drill bit and a $13 corded drill from Harbor Freight. The drill bit was barely making a dent in the button, but things seemed much looser. I tried the key and lo and behold I was able to get the key to the ACC position; remove the cylinder; and replace it with a LockSmart LC63100 from Autozone ($57).
Hi MY Keys Automotive, I'm going to attempt this on Saturday on my 04 Tundra. Just an update my part came in, and my truck is back in business. Thanks so much for posting this video.
I just replaced mine out and followed your instructions but my key is still stuck in the ignition any possible things I could have done wrong?. Thanks for the vid it was very instructional and had everything I needed to know about it👍
Yo dude great video on the Toyota ignition wife lost the key and everybody else seems to think that is just normally going to have the key and you can put it in the accessory position they don't tell you nothing about having to drill it out stuff that was totally informative thank you brother
Thank you man, you made it so simple. My key will turn to acc. But won't turn off/lock, but you just fixed me up. Gonna go change it out right now, have a good one brother!
Hello, I followed your instructions and they worked perfectly until the point where I drilled out the pin then I pulled out the ignition. My key was stuck in the lock position. At this point in the video, you show using needle nose pliars to adjust the interior mechanism to the “Accessory” position. When I try to adjust it, it won’t move and I can’t adjust it to accessories position, so I can’t install the new ignition because it’s not lined up. Is there a trick to adjusting the interior mechanism. Please I need help Thank you
@@MYKEYSAUTOMOTIVE Followup... Just followed your video for my 2000 Tundra and worked like a champ! No more spending 5 minutes like I'm trying to crack a safe in my driveway, turning the key just right every morning. Many more thanks to you!
This video was immensely helpful. I appreciate the information very much. I was able to change mine out, and after doing so I compared the new key to the old and wondered due to the extreme wear on the old key whether or not it was simply the key itself. I suppose if I am able to get a new key for the old one and have it turn with no issues(or not) I will comment on here again with the result.
My lock button spins when trying to drill 😭 been drilling for two hours now glad I have your trick sad cause I may need to try something else thanks for the idea tho!
Let me ask you another question my son has 2004 Toyota Tundra it's a V8 SR5 it's got $250,000 MI I need to change the plugs so I'm afraid that they may not come out what do you recommend to do I heard spray some good corrosive spray maybe heat up the engine a tad and then take them out what do you think God bless brother
Yes and if you need to wait for the new one. I been using long needle nose pliers to start the truck to move it around the drive way. Secret kill switch..
You’re the man! Thank you much my brother! Great simple instructions and “BAM” mission accomplished! Couldn’t have done it without your help & knowledge! 🙌MERRY CHRISTMAS!🙌 🙏Much respects!.😇✌️
Absolutely. Love this channel I just found. Glad I lost my truck keys now. Hope I find them or else I will be using what you know to fix the problem all together. Genuinely appreciate you.
@@MYKEYSAUTOMOTIVE You got it brother thank you thank you. Found my keys two days ago when the ice defrosted!! Went out the door to get the part but lo and behold. The clicker even worked still. I put it in rice to make sure moister got out of it.
I followed everything you said. Now the new one I installed with the new key and it doesn't want to come out and it locks on ACC. The key comes out only if I disconnect the battery, only than it releases back to lock and key comes out. Any suggestions? Hopefully I'm being clear so you can understand me. Thanks
JD painting i think you turned it a bit too much try to adjust the inside right!! The vehicle cannot tell weather you are in parking thats why the key doesnt want to come out!
I’m changing my cylinder on 1999 4Runner. Followed everything. But when I turn it on, it sounds like it’s about turn on but doesn’t fire up. Does the alarm on there have any affect that’s preventing me to crank up the engine?
Great video, came across your video. Is there any differences with finding one of these on amazon for an Toyota Avalon 1998? And are there any additional electronic security shut offs?
@@MYKEYSAUTOMOTIVE I actually permed the replacement. On every Toyota Avalon XLS there is a security chip. To make this fix work, i hold the old key closely to the new key when inserting the key, wait for the red security light hold to on in the dash then turn off...then i turn the key. Success! If I wanted to I could buy a chip key and have it remade with the new key but that's extra $$. My method is the quick and dirty method.
@@MYKEYSAUTOMOTIVE your video made me think I could do it, thanks for putting it out there! Then combined with this other video showing me the trick for the security got me to the finish line
Hi brother it was a great video you make, but when I install the new ignition on and the new key turns on, but the car won’t start. Do I need to program the new keys. Let me know if you can help. Thanks
My key froze and would not move to ACC. I got my old cylinder out but where you turn the switch to ACC with the needle-nosed pliers mine seems stuck and won't turn to ACC! My old cylinder turns freely btw. What now? Is it something else or is there a trick to turning it to ACC?
I bought the same brand lock cylinder at Autozone but with the battery connected, the key wont turn all the way back to remove key. Not sure why only when battery is connected.
@@MYKEYSAUTOMOTIVE but didn't you need to re-program the keys from the original "master" key to be recognized by the transponder and unlock the immobilizer?
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Excellent video,,, but I cannot get the key to release from the cylinder after sliding it back into position ( in the ACC position) and then turning it to the OFF position. They key won't come out.
You may need a new code cut key. I would put it into ACC then pull it (the ignition cylinder) out. Your key will come out at this point. Go to a Locksmith to get a new code cut key (factory specs) or dealer if you prefer
@@wattvoltamp Thanks. Actually, there is some kind of sensor, or electrical wire connected to the ignition cylinder. This part is known to fail. I simply disconnected the wire, and all is good. I believe it is part of the anti theft system. I finally ordered a new entire ignition cylinder, and the key would not release out of it either. But after disconnecting the wire, it worked perfectly.
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Hi I followed the instructions but I cannot get the the new Ignition lock cylinder to go in. Everything is aligned to ACC. Also the new keys don't open my doors, is this the wrong part?
Hello greetings! 👋🏽👋🏽For priority commenting please join our members club! Next the subscribe button from a laptop or desktop you will see the join button!! Thank you!🙏🏼🙏🏼❤️❤️❤️
Need to see if you have any information or video on 2012 Tundra ignition Key stays stuck and can't remove. the acc stays on! is this the switch or is it a solenoid on the ignition switch. I've heard it's the solenoid. Do you have a video on replacing or repairing of either solenoid and or switch?
You can put a tr47 blank key in the ignition it will reset the split tumblers and key will turn take apart and remove split wafers
Thank you thats a great tip!! Will keep that in mind!!!!God bless you!!
@@MYKEYSAUTOMOTIVE mßß
We’re can I find one of those
RODNEYdaROCKSTAR 6 a blank Toyota key blank tr47
@@rodneydarockstar6360 ebay
Who are you?! You're such an angel to community, for humanity. Thank you. I just busted my hubby's ignition on the trip to the paint store today. If I can fix it before he comes home, I will have a story at the very least. ;-) I love building and fixing. Did I mention that you're absolutely amazing?!
Thank you for the support! My name is Michael! God bless you and your family!🙏🏼❤️❤️
Hi buddy, how I can join your club channel and how much is it?
Thank you for taking the time to make this video. I followed your procedure and it took me 15 minutes to remove/replace the ignition lock cylinder, which allowed me to start and drive my truck.
Nice!! Way to go!! Thank you for watching!! Take care.
Excellent instructions, sir. I followed your video exactly and was able to remove and replace the ignition lock cylinder with no problems at all. Thank you!
Glad i was a able to help dont forget to subscribe and join our members club!
Drilling the push button I could not think of. Thank you. I will try. I spent all day trying to get it out. ------- one hour later---- It worked!!!!! Thank you!!!!!
❤️🙏🏼🙏🏼goog luck to you sir!
this video saved me a ton of headaches. been battling my ignition for quite some time. thanks for posting
💪🏻💪🏻💪🏻🙏🏻🙏🏻 good job!!
Really great video! I found others that weren't nearly so specific - particularly showing the little hole where the lock needs to be drilled out. Thanks so much!!!
Thanks for sharing, lost the key to my 4runner project. Loved the dudes in the background when you popped it out. 🤣
Great video. I watched it, giggled the key and managed to get it into the accessory position. I disconnected the battery and bought a new switch. I had it installed in 20 minutes. The video even tells you what socket to use and where the bolts are. The only tricky thing was the light ring, it popped off and I had a bit of an issue aligning it, but still managed. I loved the fact that this was for my exact vehicle, but probably works with many others. The pin he's drilling out is an anti-theft device.
Thank you james for sharinf your experience!!🙏🏼🙏🏼❤️❤️❤️
Hey man just wanted to tell you thank you. My truck was broken into last week some A hole decided to destroy my ignition. after watching your video I popped in a new one no problem drilled out the old one got everything to work truck started right up. Just wanted to tell you thank you.
No problem steve im glad i was able to help you out through my video!! Please subscribe and give me a thumbs up! Thank you ,take care!
Best video to put the ignition lock cylinder in with. My vehicle is a 2003 Toyota Highlander. Made changing so easy. Just follow instructions and you can't go wrong if you have the correct cylinder. Thank you
Thank you so much for your video. I did it in no time and I still can't believe how simple it was thanks to your great instructions! You broke it down amazingly well.
Glad i was able to help!! Take care ,God bless you!!!
What size drill bit did you use?
Thank you so much! Dropped the panel, drilled out old cylinder, in with the new cylinder, reassembled dash. Boom! Fixed!
Thats right!! Right on man good work!
Orale , este es uno de los videos que ensenan lo mejor que se puede paso por paso, como dice el dicho, Mas claro no canta un gallo te felicito, estamos teniendo un problema identico y estoy seguro lo vamos a resolver, gracias.
Hola saludos amigo y Gracias!! Muchas gracias por tu comentario! Que dios te bendiga!!!🙏🏼🙏🏼❤️❤️
I was getting ready to call a locksmith until I saw your video thanks buddy !!
Glad i was able to help!!! Thank you for watching!!!
Bro thank you so much! Appreciate you helping the community. Going to try to do my 04 now
Man I am sooo glad I found your channel! You will be a very big help in my new Locksmith buiz my friend.. Thanks for your generous info!
Welcome aboard!SALUTATIONS MY FRIEND!!
thanx for the videos man, great info, i started learning as a locksmith years ago, basically on older cars without smart keys and transponders stopped round about 1995,i recently lost my job on the refinery, decided to use my money that is due to me for buying the xhorse dolphin and the accessories going with it, to start a small business and getting back into the game, in the old days i was going to try and pick that toy ignition to acc, to press that button in, and pull the cylinder out, once that's done i was gonna strip that cylinder down to the barrel ,then hand file the key ,rough up the blade a bit to where if you put a bit of pressure on the brass slide it makes a mark where your cut should be, then file that mark until the slide is level with the barrel, do eac one and then do the other side, eventually flipping the key around in the barrel to mirror the other side that's how i learned to make keys for the first two years with hand and file, after that i went to guide keys or depth keys didn't touch a cutting machine for three years when i started learning the trade
hi, is it possible that i could email you, and could you pls give me your email , iv got a question on a certain topic that i don't realy understand pls man thanx
any updates? did you end up doing locksmith work??
Fine video. Last night I could not get my 1998 Toyota Rav4's key to turn to the ACC position. I made many attempts. In the past I have fully removed the igition lock/switch assembly, so I repeated this chore today. Then I went at the button with the drill, as shown in the video. I started with a 1/16-inch titanium drill bit and a $13 corded drill from Harbor Freight. The drill bit was barely making a dent in the button, but things seemed much looser. I tried the key and lo and behold I was able to get the key to the ACC position; remove the cylinder; and replace it with a LockSmart LC63100 from Autozone ($57).
glad i was able to help! cheers
9:00 9:10 9:11 9:11 9:12
@@kevinodom4022 thank you
Hi MY Keys Automotive, I'm going to attempt this on Saturday on my 04 Tundra.
Just an update my part came in, and my truck is back in business. Thanks so much for posting this video.
Hell greetings! How did it go!!?
@@MYKEYSAUTOMOTIVE worked like a charm boss. My work truck is back up and running. Thanks for the great video
THANK YOU! This video is amazingly helpful, you just saved the day
Had the same issue with my tundra over the weekend and followed his instructions and I fixed the ignition. Good video.
thank you im Glad it helped you!
I just replaced mine out and followed your instructions but my key is still stuck in the ignition any possible things I could have done wrong?. Thanks for the vid it was very instructional and had everything I needed to know about it👍
Yo dude great video on the Toyota ignition wife lost the key and everybody else seems to think that is just normally going to have the key and you can put it in the accessory position they don't tell you nothing about having to drill it out stuff that was totally informative thank you brother
Thank you Roger im glad i was able to help ! God bless!
Thank you so much only video I found to be actually helpful
Thank you man, you made it so simple. My key will turn to acc. But won't turn off/lock, but you just fixed me up. Gonna go change it out right now, have a good one brother!
The amount of stress and money you saved me!!!! Thanks so much!! Can I like buy your lunch or something?!?!?!
Thanks for your video bro , just mine , someone tried stealing my truck and jammed the ignition.
Cheers
Thank you for your assistance on my dad’s work truck!
I vouch this guy, he knows what he’s doing!
You got
It !!anytime you need some work done let me kno!!Thank you !!! 🙏🏼🙏🏼🙏🏼 hope you have a great week!!
Thanks so much for this video. Drilling the hole was key. My truck is running👍
Thank you brother! Glad you liked it!!
Great video. Very thorough and detailed with explaining how to do this. Thank you. GOD Bless you.
Thank you ! Glad you liked it!
Thanks bro you made it nice and simple appreciate your advice keep it going brother
Thank you sir
Thank you very much! You explained things so well and I found your video very helpful!
One of the best and one of a kind you are my friend,as usual you are helpful and your videos are highly appreciated.
Thank you very much friend I appreciate you!! 🙏🏼🙏🏼🙏🏼
LOVE Y SO SO MUCH... YOUR VIDEOS BEEN SO MUCH HELP IN MY CARRIER THAN YOU VERY VERY MUCH
🙏🏼🙏🏼❤️❤️❤️
very good job and thanks for informing others on how to get business for their new businesses.
Thank you for watching!!!! Stay safe!!
I wish I could subscribe twice. Thanks for this awesome video, I have to do one of these tonight and this will help me tremendously!
Thanks. Drilled it out. Bit more work if your bits are worn but go slow, it’s metal not wood.
Hello, I followed your instructions and they worked perfectly until the point where I drilled out the pin then I pulled out the ignition. My key was stuck in the lock position. At this point in the video, you show using needle nose pliars to adjust the interior mechanism to the “Accessory” position. When I try to adjust it, it won’t move and I can’t adjust it to accessories position, so I can’t install the new ignition because it’s not lined up. Is there a trick to adjusting the interior mechanism. Please I need help
Thank you
Thank you! Your video was so helpful. I successfully replaced my ignition lock cylinder.
Thank you! You save my day.. DIY and it works!
Thank you for the great explanation of this process! Best one for 2st gen tundra!
Thank you for watching!! Take care!!
Perfect! Just what I needed. Thank you SO much for the post!
Thank you for watching!!
@@MYKEYSAUTOMOTIVE Followup... Just followed your video for my 2000 Tundra and worked like a champ! No more spending 5 minutes like I'm trying to crack a safe in my driveway, turning the key just right every morning. Many more thanks to you!
This video was immensely helpful. I appreciate the information very much. I was able to change mine out, and after doing so I compared the new key to the old and wondered due to the extreme wear on the old key whether or not it was simply the key itself. I suppose if I am able to get a new key for the old one and have it turn with no issues(or not) I will comment on here again with the result.
My lock button spins when trying to drill 😭 been drilling for two hours now glad I have your trick sad cause I may need to try something else thanks for the idea tho!
No problem Glad i can help!
Thanks to people like you!!
Thank you! God bless!
Bro killed me when he sang closing time
😂😂😂the best part of closing!
Hey Thanks.. because of this video I did it myself!! Whoop whoop!!😊✌
👌🏻👌🏻👌🏻 glad i was able to help!
Just bummed cause now starter went.. my lil car i think needs to retire..lol.. but thank you 😊
@@paulahardy8796 awe im sorry to hear that 🥲🥲
This video is great. Showed exactly what I needed to know to change my ignition lock cylinder.
You got it glad i can help!! Bless u!!
One of my favorite locksmith channels, I’m a locksmith in Michigan. If I ever have any questions can I email you?
Yes sir!! Here to help!! Lilroxx001@yahoo.com
The best job I seen on this problem you made it so simple thanks for your smarts God bless
Thank you for watching God bless
Let me ask you another question my son has 2004 Toyota Tundra it's a V8 SR5 it's got $250,000 MI I need to change the plugs so I'm afraid that they may not come out what do you recommend to do I heard spray some good corrosive spray maybe heat up the engine a tad and then take them out what do you think God bless brother
Good job, good video!
Thanks for the visit
DUDE! Thank you, same exact thing happend to me on my 07 Corolla, Thank you so much !
Yes and if you need to wait for the new one. I been using long needle nose pliers to start the truck to move it around the drive way. Secret kill switch..
🙏🏼🙏🏼🙏🏼💯💯💯❤️❤️
You’re the man! Thank you much my brother! Great simple instructions and “BAM” mission accomplished!
Couldn’t have done it without your help & knowledge!
🙌MERRY CHRISTMAS!🙌
🙏Much respects!.😇✌️
Thank you brother God bless you
Thks mannn casue mind started today.
Thank you
@@MYKEYSAUTOMOTIVE I kept the same Ignition switch and had to remove all the hard grease inside of it and it's been working fine for the past year
Thank you . This worked well and saved me money
glad to hear that! thank you!
Thanks a lot legend!
Very helpful, thanks. It was a snap for my 2000 Avalon
Do you have a video showing how to rekey the new ignition cylinder to the old key once we have installed the new cylinder? Thank you 🙏🏼
Not yet
good information thank you.
That beep driving anyone else crazy?? I can’t last any longer. Lol.
🤣🤣
You're a g.
Great video on this.
Great video!!
Thank you Robert!!
Absolutely. Love this channel I just found. Glad I lost my truck keys now. Hope I find them or else I will be using what you know to fix the problem all together. Genuinely appreciate you.
Thank you brother!! Take care!
@@MYKEYSAUTOMOTIVE You got it brother thank you thank you. Found my keys two days ago when the ice defrosted!! Went out the door to get the part but lo and behold. The clicker even worked still. I put it in rice to make sure moister got out of it.
Nice explication
Preciate the help braddah keep them vids coming
Thank you! Brother!
Thanks man
Thank you
Thanks for the AWESOME video!
Thank You Carl glad you liked it!
what about the theft protection/chip in the keys how are they set up? Thanks for the video
Well this one doesn't have one and if your vehicle does you need to call a locksmith and have them program thd new key
Jesus Christ. Just pull the fuse or clip that speaker. Couldnt focus on a thing you were saying. Thank you for taking the time to make the vid tho
hahaha ! np thank you
Thank you very much know i can fix my t00 Toyota
Thank you have a great day!!
Gracias me Silvio mucho y ahorre dinero
Gracias a ti!
Well explained sir. Good job.
Thank u sir!
Thank you
🙏🏼🙏🏼🙏🏼❤️❤️❤️
My korean people 😂😂😂 good work man 👍👌
!!😄😄Thank you !! Thank you for watching!! 🙏🏼🙏🏼
I followed everything you said. Now the new one I installed with the new key and it doesn't want to come out and it locks on ACC. The key comes out only if I disconnect the battery, only than it releases back to lock and key comes out. Any suggestions? Hopefully I'm being clear so you can understand me. Thanks
What year and model???
Sounds like the ignition lock cylinder is not seated right!
2000 toyota runner
JD painting i think you turned it a bit too much try to adjust the inside right!! The vehicle cannot tell weather you are in parking thats why the key doesnt want to come out!
Thank you brother! I just figured it out! Thanks for your time and consideration. Your video was very helpful!! 🙏👍👍
Excellent video, Thank you
You are welcome!
I’m changing my cylinder on 1999 4Runner. Followed everything. But when I turn it on, it sounds like it’s about turn on but doesn’t fire up. Does the alarm on there have any affect that’s preventing me to crank up the engine?
4runner models 1999 and up key requires programming...😋😋😋😋😋😋
Thank you for your video
Thank you for watching!!🙏🏼🙏🏼❤️❤️
God Bless you Bro!
Thank you brother! God bless you!!🙏🏼🙏🏼❤️❤️
Great video, came across your video. Is there any differences with finding one of these on amazon for an Toyota Avalon 1998? And are there any additional electronic security shut offs?
no difference same thing ,must check with the dealer to see if you vehicle is equipped with a immobiliser system
@@MYKEYSAUTOMOTIVE I actually permed the replacement. On every Toyota Avalon XLS there is a security chip. To make this fix work, i hold the old key closely to the new key when inserting the key, wait for the red security light hold to on in the dash then turn off...then i turn the key. Success! If I wanted to I could buy a chip key and have it remade with the new key but that's extra $$. My method is the quick and dirty method.
@@videosuperhero100 glad you where able to figure it out! cheers
mate!🙏🏼🙏🏼🙏🏼💯💯💯❤️❤️❤️
@@MYKEYSAUTOMOTIVE your video made me think I could do it, thanks for putting it out there! Then combined with this other video showing me the trick for the security got me to the finish line
+1 like from Russia
🙏🏼🙏🏼🙏🏼
Hi brother it was a great video you make, but when I install the new ignition on and the new key turns on, but the car won’t start. Do I need to program the new keys. Let me know if you can help. Thanks
For priority commenting please joing our members club thank you!!
My key froze and would not move to ACC. I got my old cylinder out but where you turn the switch to ACC with the needle-nosed pliers mine seems stuck and won't turn to ACC! My old cylinder turns freely btw. What now? Is it something else or is there a trick to turning it to ACC?
Move the steering wheel around!! Jiggle it!! Maybe the steering lock is activated!
This worked for me. Thank you.
I bought the same brand lock cylinder at Autozone but with the battery connected, the key wont turn all the way back to remove key. Not sure why only when battery is connected.
Buzzard underneath housing not work unplug it
Did you rekey the ignition cylinder to match the original key prior to changing it? Or did you just use the keys that came with the new lock?
Just used the keys that it came with!!
@@MYKEYSAUTOMOTIVE but didn't you need to re-program the keys from the original "master" key to be recognized by the transponder and unlock the immobilizer?
thank you for video
Thank you for watching!
You video is amazing! would the same part number work on a 2001 Toyota highlander with the security system (I believe its called the immobilizer)?
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Are you able to Match the ignition and the doors locks to use Just one key
Can I use a ignition from the junk yard ? Is it gonna work ? I have to buy it brand new?
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
By replacing the cylinder, how did you get the new key to communicate with the immobilizer ECU to get the vehicle started?
Excellent video,,, but I cannot get the key to release from the cylinder after sliding it back into position ( in the ACC position) and then turning it to the OFF position. They key won't come out.
Jon Randall same here
You may need a new code cut key. I would put it into ACC then pull it (the ignition cylinder) out. Your key will come out at this point. Go to a Locksmith to get a new code cut key (factory specs) or dealer if you prefer
@@wattvoltamp Thanks. Actually, there is some kind of sensor, or electrical wire connected to the ignition cylinder. This part is known to fail. I simply disconnected the wire, and all is good. I believe it is part of the anti theft system. I finally ordered a new entire ignition cylinder, and the key would not release out of it either. But after disconnecting the wire, it worked perfectly.
good job on figuring out the issue!!
How do you get the key out of the old ignition??? Mine is still stuck
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Why won’t my car turn over after replacing this!? Do I need recode the net keys?
Must have an immobiliser chip
Hi I followed the instructions but I cannot get the the new Ignition lock cylinder to go in. Everything is aligned to ACC. Also the new keys don't open my doors, is this the wrong part?
Hello greetings! 👋🏽👋🏽For priority commenting please join our members club! Next the subscribe button from a laptop or desktop you will see the join button!! Thank you!🙏🏼🙏🏼❤️❤️❤️
Need to see if you have any information or video on 2012 Tundra ignition Key stays stuck and can't remove. the acc stays on! is this the switch or is it a solenoid on the ignition switch. I've heard it's the solenoid. Do you have a video on replacing or repairing of either solenoid and or switch?
If I change the ignition cylinder and it comes with a new key will I need to get a new lock for my doors to match my ignition key ?
EXCELLENT thanks.
Thank you David!
Will this also happen on a 2000 lexus gs400?