I hardly ever leave comments but I’ve literally got my stuck key to work after about 20 minutes in a humid parking in lot working in about 10 seconds watching the video, great content and easy to understand for those who don’t have parents to call at this times!
Oh my god I cannot begin to tell you how much you just saved our asses, we had just done our grocery shop full of frozen goods 😂 you should be given a medal
I have a Sienna, same as this one in the video. This has started to happen, but it usually resolves itself. Today was the first time It didn’t, and this video was a lifesaver
I have a 2007 Sienna as well and my one and only key quit working after I parked it up for the night. $400 later I got it fixed and it’s good as new. Unfortunately the key AND the lock were just too worn down.
Ty! Ignition was locked. Had some play in the wheel. Tried turning wheel more just in case with no luck. Jiggled the lock mechanism a few good times and it released!
Your video just helped me out of lot man. I’ve been in the parking lot of Lowe’s for an hour and the one that worked for me was jiggling the key and turning the key to the on position
Thank you so much!!! This video helped greatly. My grandpa has a very similar van, and I was trying to get the engine key in. Couldn’t turn, tried finding videos, it was all videos of new cars that start with a button. Find this video, try jiggling the steering wheel as suggested, and it worked!!! Thank you I can’t thank you enough. I was dying in the heat trying to get the van to start.
Thank you for this! I’d never had this happen before, and when it did today for the first time, I was at a loss as to what was wrong or what to do. This helped me get it sorted out quickly. 😊
Very informative without the kids yelling in the background and Harley-Davidsons revving up and the wife bitching at him yes that was very good and you explain the detail people don't know how to make a RUclips correctly with all the freaking background noise with the buzzers buzzing and the key bells ringing take the battery off jeez
@@carquestions after being in this car for 5 hours trying to get the key to turn again yes I'm going to have a couple beers preferably a blue moon or Miller life yeah thanks for your info without all the noise and distractions
@@carquestions I got it to turn so I can pull the whole tumbler assembly out now I have to look at your video on that I found one was good and have a nice day from Reading PA
I watched less than 60 seconds and it got my key unstuck! Thankful for the creator that suggested the idea that the steering wheel could get the key stuck so it would be good to try to move it. Thats how I got my key unstuck thank you!!
@@GDixon-ch3yl If the lock fails no amount of graphite will help. Some cars like Saturns - are known for ignition lock failures - so google your car for ignition lock failure and see what it says to be sure
Goodlookin out bro my boys ford ranger was stuck like when my saturns ignition cylinder seezed up completely but i was able to fix it this time wit no tools thanks brotha n have a great day!!
@@carquestions thank you so much for your videos! I have a question if you don't mind.. my 89 Cadillac does this now but I can turn key to accessories position. But will not go any further it's like a brick wall preventing my key to go to the cranking position. Should I still replace key lock cylinder or is it a steering column problem?
You don't have to break your ignition off with a chisel. Take wd40 and squirt a little in the tumbler. Insert your key and tap on the end of it with a screwdriver handle to release the tumblers. That should free it up enough to be able to use the key. Look underneath and there will be a pin you have to push with the key on to be able to remove and replace the switch. They have ones for gray key (computer chipped) and black key (no chip). Most dealers can also refurbish yours.
How much did the locksmith cost versus buying a new assembly? If you buy a new assembly, do you have to get new keys made and programmed? That costs a fortune alone. Thanks for the video! Been turning the wheel and shaking the key, but I think that's working less and less.
You might need a new lock assembly but you can program your own key - it's all over YT check it out - let me know what happens. Cheers from Canada Jeff!
@@carquestions Thanks for getting back to me so quick! Is the lock assembly the same as the ignition switch? My key is pretty worn on my 2000 Toyota Avalon. My other set was stolen, so I'm on my last key. You said a worn key can't make a new sharply cut one. Should I try to get a new one cut and programmed for $300+ first? Or does a new lock assembly come with a new key? Would applying lubricant to my existing key help, or make it worse? So sorry about all the questions! LOL. Greetings from East Bay California. 😎🌴
My key wouldn't turn everytime I would try to start my car, jiggling seemed to work most of the time but I wouldn't want to keep doing that everytime to start my car. Should I just replace the lock mechanism?
we were out fishing on a very remote lake and would have had to walk for prolly days on very quiet logging roads to get back to civilization. No cell phone service that far in...It took us 3/4 of an hour trying and finally. After I got the truck started we both sat in the truck in complete silence (had a beer) then yelled FCK at the same time...hahaha. I took the truck to ford and got it changed immidiately...lol
Mark, my daughter has a 1998 Acura integra. The key gets locked in and there is a small lever if you will on the shifter that (its under the plate/cover at the base of the shift lever) you can raise manually and the key will come out nice and smooth. I have been able to get the key out without doing that but you have to fight it and it feels like cylindars have dropped or something. I would like to know if changing the ignition switch (cylindar, keys etc) will take care of this or should I change the piece on the shifter? If so I am having a heck of a time figuring out what its called would you know what its called? Thank You
Hello! I have a 2016 Nissan Versa and this same thing has happened to me. Usually after I jiggle the key for a little bit in and out it starts right up. Some days is easier than others! What exactly should I do? From watching the video I don’t think I need to take the whole thing off.
If you're luck is like mine, not will you have to replace the ignition switch, but a few weeks later, have to replace the battery and a few weeks after that ANOTHER part. It NEVER FAILS, regardless of the vehicle. Easy fixes are for people naturally lucky. I'm not. Its the worse possible scenario every d time ! edit not ONLY will you have to .......(only was missing, no edit with this app
All the clips talk about changing the switch, but this clip is about the switch is not moving, which happened to me because of thief who broke it. thanks
So I've never had this happen with my previous cars and so when I start researching some evidence to support my hypothesis I was led to this video so I know I still need to get the sensor to my e-brake fixed so I'm keeping that in mind but as a temporary quick fix if your ignition key is stuck in a certain position and your key is able to be removed and the engine is still running if you happen to have a Lockpicking kit , use one of the tools to push all of the pins in. Once confident the pins are triggered , Using the Car key to turn switch and disengage the ignition. SUPREMELY off chance solution but it just happened to me and hope it helps Someone else out there!
Good info Aqua thanks - you can also leave the key in the ignition and tap on the end of it until the wafers fall into place if you don't happen to have a lock pic - Cheers from Canada!
Thanks for the video I have tried all the above except for removing the column cover it is a 2005 Ford explore V8 4 x 4 model so far nothing has worked however I just disconnected the battery and the key came out. I put battery terminals back on put key in fired right up key will not come out again repeat and rinse. Ha ha it just keeps happening. Any suggestions?
I have a 05 Saturn Vue n there was are times that no matter what I do wiggle the key to get it to turn it doesn't. So I believe it's time to replace the ignition.
I think we may need to replace the ignition switch in ours but my husband says if we do that then we'll have to hire a locksmith. Is that true if we were to replace the ignition ourselves? Even if the ignition comes with new car keys? It kinda looks like that's what you did too but I don't understand the need for a locksmith.
My vehicle 2001 taco quad old style key, no fob, the key is worn down. When I got to turn my truck off the ignition won't turn to the off position, it stops at the 'on' position effectively leaving my clock, stereo face and etc to drain my battery. Also the key comes out easy in any position. I need to have dealership make a new key but until then I was hoping to find a trick.
Is it just me or does this happen to everybody when it is hot and humid as hell? Also, great video. You are my number one guy!
Anytime Jon - Cheers from Canada!
It’s burning hot and humid in texas nd it’s the start of summer now my car doesn’t want to start but did all winter
Aint that the truth! Thats exactly my situation plus im dirty as shit from work👎👎🤟
Yes! 100° tx heat but solved my problem in less than a minute!
Thts crazy true for sum reason 😂😂
I hardly ever leave comments but I’ve literally got my stuck key to work after about 20 minutes in a humid parking in lot working in about 10 seconds watching the video, great content and easy to understand for those who don’t have parents to call at this times!
Love to hear that Becky - Cheers from Canada!
Oh my god I cannot begin to tell you how much you just saved our asses, we had just done our grocery shop full of frozen goods 😂 you should be given a medal
Just glad to hear it worked out Joe - Cheers from Canada!
One minute in and you fixed my issue! I put the key in and started moving my wheel and that worked!!
Good to hear - Cheers from Canada!
Thank you! I was trying to get the key to turn for 10 minutes while it's 115 degrees outside. Google couldn't help me out, but your video did!
Glad to help Rebecca - Cheers from Canada
Any chance you live in Phoenix? Same thing just happened to me!
@@marcuslmichael yep, it's brutal right now
You're a genius... took me 45 minutes to come to this video. The giggling worked. I'm most excited
Love to hear that - Manny - Cheers from Canada!
I have a Sienna, same as this one in the video. This has started to happen, but it usually resolves itself. Today was the first time It didn’t, and this video was a lifesaver
Good to hear - Cheers from Canada!
I have a 2007 Sienna as well and my one and only key quit working after I parked it up for the night. $400 later I got it fixed and it’s good as new. Unfortunately the key AND the lock were just too worn down.
Thank you! I accidentally had too much pressure on my father in laws steering wheel lmao. I was so scared I broke his truck 😂 easy fix. You rule
Anytime Lynn - Ciao from Canada! (mom was Italian)
P
@@carquestionslp
Your a life saver! Was in the middle of nowhere when this happened. Your tutorial enabled to get going! Thanks!
Anytime Shannon - where were you? Cheers from Canada!
@@carquestions Two Rivers, Wisconsin, USA. Went to our local state forest for a hike. 23 degrees...a bit brisk.
@@shannonagain3 Sounds like beautiful place
Lol same, am way up north in Northern Sweden in a borrowed car lmao
@@Knuwl5678 Glad to hear that worked out you don't want to be stranded around brown bears do we - Cheers!
You are a life saver... I just watched the first 30 sec and my car started
Anytime Donna - puts a smile on my face - Cheers from Canada!
Ty! Ignition was locked. Had some play in the wheel. Tried turning wheel more just in case with no luck. Jiggled the lock mechanism a few good times and it released!
Great - but don't chance a second lockout - get it fixed asap Cheers from Canada!
Your video just helped me out of lot man. I’ve been in the parking lot of Lowe’s for an hour and the one that worked for me was jiggling the key and turning the key to the on position
Glad to hear 626 - Cheers from Canada!
Thank you so much!!! This video helped greatly. My grandpa has a very similar van, and I was trying to get the engine key in. Couldn’t turn, tried finding videos, it was all videos of new cars that start with a button. Find this video, try jiggling the steering wheel as suggested, and it worked!!! Thank you I can’t thank you enough. I was dying in the heat trying to get the van to start.
Love to hear that Zemorgie - stay cool - Cheers from Canada!
Thank you for this! I’d never had this happen before, and when it did today for the first time, I was at a loss as to what was wrong or what to do. This helped me get it sorted out quickly. 😊
Anytime Jamie - glad to help - Cheers!
Oo it's Zaza! W!❤❤❤
Very informative without the kids yelling in the background and Harley-Davidsons revving up and the wife bitching at him yes that was very good and you explain the detail people don't know how to make a RUclips correctly with all the freaking background noise with the buzzers buzzing and the key bells ringing take the battery off jeez
John - you forgot the dog barking - Thanks and have a beer now - Cheers from Canada!
@@carquestions after being in this car for 5 hours trying to get the key to turn again yes I'm going to have a couple beers preferably a blue moon or Miller life yeah thanks for your info without all the noise and distractions
@@carquestions I got it to turn so I can pull the whole tumbler assembly out now I have to look at your video on that I found one was good and have a nice day from Reading PA
You’re a life saver my dude! Thank you!
Anytime Stephany - Cheers from Canada!
Literally just watched the first few seconds of this video and it helped me instantly. Thank you!!!
You're so welcome Liz - Cheers from Canada! and good luck on Nov 3!
Your the goat bro I’m sitting here in a parking lot mad as hell but wiggling my steering wheel and turning my key did the trick
Glad to be of service - Cheers from Canada my friend!
I tried several videos and couldn't get the key to turn. Then I saw your video about moving the steering wheel and that worked!!! Thank you!
Anytime Blas - love that - Cheers from Canada!
thank you this just saved my ass i’ve been stuck in a parking lot for almost a half an hour i got a shit box a 2001 saturn sc2 thank you
Glad to help Exkaid - hope the day gets better from here - cheers from Canada!
I watched less than 60 seconds and it got my key unstuck! Thankful for the creator that suggested the idea that the steering wheel could get the key stuck so it would be good to try to move it. Thats how I got my key unstuck thank you!!
Anytime - Cheers from Canada!
Thank you so much for this video! I was able to get my car fixed in seconds after trying to figure it out for 5mins
Anytime Jaden - Cheers from Canada!
Thank you second tip worked for me.. i was about to be late for my work. You're a Legend 👍
Anytime Sangma - glad to help
Thank you u helped me Nd a friend out just now . Turned out we needed to turn the ignition while trying the wheel at the same time . Thank you .
You helped me tremendously thanks so much
Just saved me!!
YO thank you so much. My car was acting like an ass and this worked. I love you. What you want for Christmas my dude?
@@SweetPotatoS loll no problem and its fine , just glad ya situation was able to be helped👍👍
Brilliant tip it got the bolts out of my Toyota Yaris, my key couldn't turn as barrel was jammed good and proper and steering lock on.
Many Thanks.
way to go Jay! - cheers!
Ugh saved my life😫 thought my car was DONE
Way to go Arpine! - cheers from Canada - well done!
Thank you so much for saying make sure you have the right key because half way through watching your video It occurred to me I had the wrong keys
We've all done that Ariane don't feel bad - Cheers from Canada!
Thanks you so much Brother. It help me alot. I just try the way you give the instructions and I just fix my car.
Glad to help Lelen - Cheers from Canada!
I had to sub this man saved me from being stranded
Good to hear Tank - thanks - cheers from Canada!
First tip worked for me thanks ❤️❤️🇬🇭
Anytime Ghana - cheers from Canada!
Thank you so much finished school and wanted to go home, first tip helped me pop it right in
Thank you so much! Was on a rental car very far from the city when the ignition got stuck, luckily just moving the steering wheel solved for me.
Anytime Pedro - Cheers froom Canada!
Thanks. Stuck in a parking lot for a few minutes and finally got it to work. Changing out my keys to see if that'll help. 👍
Good idea
@@carquestions I put graphite of it and waz much better but will still change the key and keep a pencil in my glove compartment.
@@GDixon-ch3yl If the lock fails no amount of graphite will help. Some cars like Saturns - are known for ignition lock failures - so google your car for ignition lock failure and see what it says to be sure
@@carquestions Good idea. Thanks.
Thank youuu so muchhh one of the first tutorial videos that actually worked
Anytime - Cheers from Canada!
Goodlookin out bro my boys ford ranger was stuck like when my saturns ignition cylinder seezed up completely but i was able to fix it this time wit no tools thanks brotha n have a great day!!
Anytime Ligidy - cheers from Canada!
First time this ever happened. Thank you!!!!
anytime Rose cheers from Canada
@@carquestions thank you so much for your videos! I have a question if you don't mind.. my 89 Cadillac does this now but I can turn key to accessories position. But will not go any further it's like a brick wall preventing my key to go to the cranking position. Should I still replace key lock cylinder or is it a steering column problem?
Legend, started my car after 2 seconds of watching this!
Nice! Cheers from Canada Jamie
It was my key. Thanks.
Anytime LL - Cheers from Canada!
Saved me!!! Was stuck in the mountains in Japan! 🙏🙏
Really? Wow! - have a safe trip - Cheers from Canada Shawn!
Thank you good sir. You saved me. Greetings from Perú.
Anytime - Cheers from Canada!
thank you man this just saved my day
Glad to hear it Zack - Cheers from Canada!
thank you!!! just saved me from being stuck in 90 degree weather any longer lol
Anytime Bee - glad to help
Great video!! But the top one I can't get to. So going to drill out mine.
Sounds good - good luck Cheers from Canada!
My mom said to say thanks for saving us with the steering wheel part 🙏
Tell her it was my pleasure Howard - Cheers from Canada!
Thanks! Turning the wheel did it 😊
Good to hear - Cheers from Canada!
Thank you so much my mo.s car got locked out u saved the day
Anytime Terra - Cheers from Canada!
Saved me a tow, and possibly a shop visit
Very glad to hear that JD - Cheers from Canada!
Thank you so much!!!!!! I was about to cry and leave my car
Anytime Liza - glad it worked out - cheers from Canada!
Saved me being stuck in the heat
Good to hear - Cheers from Canada!
Dude you just saved my ass! Can’t thank you enough
anytime Adrian cheers from Canada
You don't have to break your ignition off with a chisel. Take wd40 and squirt a little in the tumbler. Insert your key and tap on the end of it with a screwdriver handle to release the tumblers. That should free it up enough to be able to use the key. Look underneath and there will be a pin you have to push with the key on to be able to remove and replace the switch. They have ones for gray key (computer chipped) and black key (no chip). Most dealers can also refurbish yours.
Good pro advice Chris - thanks - Cheers from Canada!
It's a good video to watch however I agree with you WD 40 would've work a lot faster still a good video to watch
God bless you, shaking it worked.
Anytime King - Cheers from Canada!
Thank you so much
Anytime LesDodo - Cheers!
I have a 98 Nissan Altima. After the locksmith, putting the assembly back in, does one use the same security bolts?
nope - can't tighten them - single use only - just use regular bolts
How much did the locksmith cost versus buying a new assembly? If you buy a new assembly, do you have to get new keys made and programmed? That costs a fortune alone. Thanks for the video! Been turning the wheel and shaking the key, but I think that's working less and less.
You might need a new lock assembly but you can program your own key - it's all over YT check it out - let me know what happens. Cheers from Canada Jeff!
@@carquestions Thanks for getting back to me so quick! Is the lock assembly the same as the ignition switch? My key is pretty worn on my 2000 Toyota Avalon. My other set was stolen, so I'm on my last key. You said a worn key can't make a new sharply cut one. Should I try to get a new one cut and programmed for $300+ first? Or does a new lock assembly come with a new key? Would applying lubricant to my existing key help, or make it worse? So sorry about all the questions! LOL. Greetings from East Bay California. 😎🌴
just look for the lock cylinder with key maybe Amazon - no need to change the other parts@@jeffs9300
@@carquestions Okay, I'll definitely try that. Thank you, sir!
My key wouldn't turn everytime I would try to start my car, jiggling seemed to work most of the time but I wouldn't want to keep doing that everytime to start my car. Should I just replace the lock mechanism?
Try a new key cut to code first it's cheaper - dealer has code
Dude you saved my life thank you
Anytime - Cheers from Canada!
Thank you so much! Saved me from being stuck at work!
Glad I could help CC - Cheers from Canada!
It worked. Thanks saviour
Good to hear BB - Cheers from Canada!
Love you man happy new year a life saver
Glad to help Bleen - Cheers!
first thing worked, thank you!
Good to hear Vin - Cheers from Canada!
I
Thank you for making your beautiful property today
This worked you sir know your business
Glad to help - Cheers from Canada!
we were out fishing on a very remote lake and would have had to walk for prolly days on very quiet logging roads to get back to civilization. No cell phone service that far in...It took us 3/4 of an hour trying and finally. After I got the truck started we both sat in the truck in complete silence (had a beer) then yelled FCK at the same time...hahaha. I took the truck to ford and got it changed immidiately...lol
I'm glad it worked out and you had a cell signal Woody - Cheers from Canada!
no cell service ...it took me 45 min to get the key unstuck...lol
@@carquestions
Mark, my daughter has a 1998 Acura integra. The key gets locked in and there is a small lever if you will on the shifter that (its under the plate/cover at the base of the shift lever) you can raise manually and the key will come out nice and smooth. I have been able to get the key out without doing that but you have to fight it and it feels like cylindars have dropped or something. I would like to know if changing the ignition switch (cylindar, keys etc) will take care of this or should I change the piece on the shifter? If so I am having a heck of a time figuring out what its called would you know what its called? Thank You
Dave - I'd chenge out the lock cylinder - sounds like its failing
The man' a Genius
Thanks Rich - Cheers from Canada!
Thank you! 2nd tip worked for me
You're welcome Jess!
Omg thank you! The steering wheel truck worked 😅 mine gets jammed like 2x a week
Sorry for the late reply - Thanks and cheers from Canada !
Wow what a saviour
anytime Zak -
Saved my life! Thank you so much
Anytime Joe - Cheers from Canada!
Thank you!!🙌🏽
No problem Arely - Cheers from Canada!
This just happen3d to my daughter's car. Going to try this!
Let me know how you make out - good luck - Cheers from Canada!
Thank you! The jiggle jiggle then a turn worked
Anytime Joey - Cheers from Canada!
Thank you very much! It worked!
Anytime Inna - cheers from Canada!
Hello! I have a 2016 Nissan Versa and this same thing has happened to me. Usually after I jiggle the key for a little bit in and out it starts right up. Some days is easier than others! What exactly should I do? From watching the video I don’t think I need to take the whole thing off.
If you're luck is like mine, not will you have to replace the ignition switch, but a few weeks later, have to replace the battery and a few weeks after that ANOTHER part. It NEVER FAILS, regardless of the vehicle. Easy fixes are for people naturally lucky. I'm not. Its the worse possible scenario every d time ! edit not ONLY will you have to .......(only was missing, no edit with this app
Helped me when I wriggled the steering wheel
So glad ro hear - Cheers from Canada Zak!
All the clips talk about changing the switch, but this clip is about the switch is not moving, which happened to me because of thief who broke it. thanks
So I've never had this happen with my previous cars and so when I start researching some evidence to support my hypothesis I was led to this video so I know I still need to get the sensor to my e-brake fixed so I'm keeping that in mind but as a temporary quick fix if your ignition key is stuck in a certain position and your key is able to be removed and the engine is still running if you happen to have a Lockpicking kit , use one of the tools to push all of the pins in. Once confident the pins are triggered , Using the Car key to turn switch and disengage the ignition. SUPREMELY off chance solution but it just happened to me and hope it helps Someone else out there!
Good info Aqua thanks - you can also leave the key in the ignition and tap on the end of it until the wafers fall into place if you don't happen to have a lock pic - Cheers from Canada!
Thanks for the video I have tried all the above except for removing the column cover it is a 2005 Ford explore V8 4 x 4 model so far nothing has worked however I just disconnected the battery and the key came out. I put battery terminals back on put key in fired right up key will not come out again repeat and rinse. Ha ha it just keeps happening. Any suggestions?
Thanks for the info Bret might help others - Cheers!
I have a 05 Saturn Vue n there was are times that no matter what I do wiggle the key to get it to turn it doesn't. So I believe it's time to replace the ignition.
100% right Brenda - those Saturns are known for bad ignitions - get it changed - Cheers from Canada!
Thank you!
Anytime Doc - Cheers from Canada!
I think we may need to replace the ignition switch in ours but my husband says if we do that then we'll have to hire a locksmith. Is that true if we were to replace the ignition ourselves? Even if the ignition comes with new car keys? It kinda looks like that's what you did too but I don't understand the need for a locksmith.
It depends on the make model and year of your car -the local mechanic can usually do it - if its old like 90's you maybe able to do it.
Absolute legend thanks.
Anytime Trent - Cheers from Canada!
How do you get the plastic pieces off around steering wheel in order to take out the ignition mechanism?
there are usually a few screws and clips - varies by model
THANK YOU!!
Anytime - Cheers from Canada!
steering wheel fixed mine 😅 woah thanks you
Anytime Steve
Thank you man
You got an instant like from me
Anytime Julius - cheers from Canada!
Thanks for the help!
No problem ZZ - cheers from Canada!
It worked,Thank you.
Love that Sanni - Cheers from Canada!
Thank you so much for doing this video
Anytime Jonathan - Cheers from Canada!
Thank you
Anytime Jason - Cheers from Canada!
Wow thank you that was very helpful 😊😊
Anytime Chris - Cheers from Canada!
now take a vice and die center grind a flat screwdriver slot to re install.
Good advice Rick - Cheers from Canada!
Exactly what I needed
Happens to everyone at some point - Cheers From Canada Marc!
My vehicle 2001 taco quad old style key, no fob, the key is worn down. When I got to turn my truck off the ignition won't turn to the off position, it stops at the 'on' position effectively leaving my clock, stereo face and etc to drain my battery. Also the key comes out easy in any position. I need to have dealership make a new key but until then I was hoping to find a trick.
I'd change to whole lock assembly not just the key - Cheers!
Thank you saved my key!!!
Good to hear Marie - Cheers from Canada!
Genius !
Where is the fixing parts and was there a black cabel ?
You order the parts and there was no black cable
Just tap the end of the key with a hammer. Job done.
not a good idea
Man my nissan Xterra (2004) did this to me last night, had to get a tow because no method would work 😔
Sorry to hear - may need a new ignition lock cylinder
@@carquestions thanks for the advice, currently looking for some right now. Too bad it's expensive for a new one.