Looks good. Question: your link brings us to the item and it's being sold & shipped by Interfaceglobal. The photos show labels in what I am guessing is German. As a result, the ETA is the middle of September. Is the same stuff you are showing us? Thanks.
Finally. When they started making dental floss out of plastic tape I switched to flossers that still have a string...it's useful now. The downside is that floss is probably more expensive than the actual sealing cord. lol gotta love hacks that hack your wallet lol
Question on your example. You stated 45 degrees but in the video it sure looks like that was a 90 degree adjustment. Do you expect to see a leak with a 90 degree adj?
@@SilverCymbalIt is PTFE. And currently PTFE cannot be made without the high temperature fluorocarbon surfactants that are on the bad list. The do check the final content. As of a year ago a company in India was almost done with a new process.
I have been using this type of sealing (i am not a professional, just for personal applications) for about 10 years, and yeah, this stuff is way better than PTFE tape for water supply. For better results, try to cover cross-sections not in one spot, but instead all around the thread you're sealing, and don't be afraid of not following the thread, you should better cover all the thread with almost chaotically placed seal. From my understanding, this type of seal works by creating sort of labyrinth between the threads of the pipe and the seal strings itself, thus not allowing water to leak. Compared to the regular PTFE tape, which, once adjusted, starts to leak because there's no labyrinth, and water immediately gets way between thin layers of the tape.
People have done it with floss, and I have seen it work. BUT they don't tell you its got like a 90% failure rate, I originally was going to try to make my own but it's not worth it. This little bottle would last most people years.
@@SilverCymbalthe inclusion of the floss video was really confusing, I didn't know until the very end that you weren't suggesting it as a replacement for tape. I still don't, now that I read this comment. Is that brand of floss better than tape? Is it made out of the same stuff as the Loctite product?
I have used it. I've kept in in my chemicals cabinet for years. like everything else, I have had it leak. It's really good on "loose" connections. My "go to" is still Teflon tape AND Rectorseal.
I've been a plumber for over 10 years and all I use is hemp and Unipak jointing compound. Works for every usecase, including glycol and doesn't really matter how much you apply it. It can even be undone for several turns and it still wont start leaking. There's a slight learning curve to it but but it's not rocket science. Most important thing is to apply it in the right direction and make sure it doesn't come out during tightering. With smooth threads, such as brass ones it's recommended to scratch them a bit first with a hacksaw blade for example. Helps it grip the hemp.
My tankless water heater installer uses it. (EU) When I asked him about it, he said it was much better than ordinary Teflon tape despite the higher price.
Excellent presentation. Thank you. Appreciate you sharing tidbit like this. Loctite has such a vast catalog of interesting stuff and I honestly don't know a fraction of it.
I mean saying Teflon tape is not easy to use is by far the biggest stretch i heard in a while. Once you overlap it once it will not come off, extremely easy unless your a lemon.
I was always told tape/dope is a lubricant. While I think this has a lot of legs, a sealing property is always preferred in my book… I would give it a try. Loctite should sponsor this and give samples…I mean,, I would for a nearly 100mil per year hvac,plumbing company and I buy a lot of stuff….
All of my company's pipefitters use both tape and dope. I always thought that was strange until they said the same thing, tape is the lubricant not the sealant.
yea, which is why it still gets used on pipe with washer sealers as he got wrong in his other video. It is so you can remove the pipe and it hopefully doesn't get locked together years down the road
RectorSeal pipe dope was a favorite in the oilfield. We used soft set so you could break it out later. The hard set would egg a pipe before it would break! 🥵🥵🥵
I would be willing to try this stuff if I ever saw it in stock, I've never seen or heard of it. If you know how to properly use the Teflon tape it works just fine and I don't have a problem with leaks. I've been doing this for about 30 years. What I usually do is wrap the pipe threads with the tape and then I apply a thin coat of pipe dope, which is what we call the thread sealant here in the United States. Other parts of the country may use a different terminology, I'm in the Midwest. One of the main things that you have to do correctly to have success with the tape is to know when to stop tightening the fitting. You have to tighten it far enough but you can't go so far that you end up stuck where you have to back it off. I never back off the fitting, if I estimate incorrectly then I remove the device or fitting and remove the tape and start again. If you do not wrap the threads correctly with the tape, what happens is as you are tightening it, your fitting just starts pushing the tape off of the threads. This causes you to end up with bare threads that have no tape on them, all the tape that you have applied is completely visible which is not good. If you do it correctly you will have a layer of Teflon tape covering the threads after you have screwed the piece on. There is more to it than just wrapping it in the correct direction, which is also important to do. The beginning of the threads should not be wrapped thick at all. If the beginning of the threads are wrapped thick, it will cause the fitting to push the tape right off of the threads and it will just plow the tape right off of the threads and leave them completely bare. There is some level of skill but it's not that complicated. I don't have problems with these pipe thread fittings leaking using tape or a combination of tape and pipe dope. There has been a quest since even before I started working in the trades to completely eliminate the need for skill at doing skilled labor. This is due to the ongoing quest to be able to do all this work with the lowest paid and unskilled labor possible. This is happening in all areas, plumbing, carpentry, drywall, including the finishing. They want to make it where complete idiots with no skill can do as much of the work as possible. Don't know how to the simple job of wrapping a pipe with tape and installing a valve without it leaking? Here use this new product, you can be as ham-handed as you want to and it will still work. I'm not a Luddite and I will use new technology, but I still know what they are doing, and the motivation is exactly what I said. If all you have available is regular Teflon tape, you still need to be able to use this approved product and not have leaks in a consistent way.
I'm in Australia. I've never heard of this so just did a quick search and found it is available here and is discounted at the moment. I'm buying some tomorrow. Thanks.
Likewise, and this is perfect timing as just a couple days ago i needed something to seal metal to plastic threads (airbrush fittings). Often its frustrating when DIY channels from the US use a product that isnt available in Australia, or is way more expensive to source here.
@@westernfrontproductions After my first post yesterday I found Repco is selling it at a discounted price. Bought 3 lots today. should last me a long time.
I don't know if teflon tape in Germany is build differently, but I never got it to seal properly on the first try, so I switched to sealing cord a while ago and it never disappointed me. I even tried teflon tape on the intake and outlet of a pump again after watching your video, but I never got either end to seal completely.
Last year my pops blew my mind by using hemp from horse tail hairs. It still smelled like it too. 🤗😂 I dunno why you're showing us dental floss at all in this video, but the Loctite 55 is awesome! 🤘
I like it. Thx for sharing. Seems expensive at first glance, but I’m reminded how expensive my last leak was…. I guess amazon & loctite are getting more of my $$.
Teflon tape isn't supposed to be the sealing agent. It is supposed to lubricate the threads. The threads in tapered NPT are supposed to deform to create the seal. You need the lubrication to prevent galling. For the most part this also applies to pipe dope. The sealing thread on the other hand is far thicker and is designed to both lubricate and seal. the teflon thread fills the voids and is compressed. When you reposition it can expand enough to keep the void sealed. I need to add some Loctite 55 to my tool bag for certain applications. My go to at work is Loctite 567 thread sealent for most jobs and nickle impregnated teflon tape for stainless. But, to each their own. I'm always game to try new products.
I love the blue leak lock pipe dope. I would eat it if i could😂"not really but i do love it" i dont care if im doing gas fittings, water lines like tub spouts/showerheads or installing a water heater. I grab a jar and i know im set. I worked in 50+ year old apartments and ive never had a leak when first testing like i have with tape. I also have never had a leak from anything installed years later with the blue leak lock. So for me and everyone ive known its basically the best! The only negative is yes its blue and yes it will stain your tools but its thick enough you shouldnt really ever get it on carpet or anything. If you can avoid making a mess with purple pvc primer then leak lock will be a piece of cake. Leak lock isnt as clumpy as the tulype in your video just make sure your stir it with the brush because if its unused or sat awhile the oils will seperate but a couple quick stirs and its mixed. I mean use what you prefer or comfortable with but if you use regular thread tape i can promise you will love leak lock. Its like gold to us😂 **im sure this tooth floss is great maybe even better but im set in my ways and its hard to change whats working perfect for me
Teflon tape is only hard to use if you dont know how to use it, pipe dope is only messy when you use way too much, and either pipe dope or teflon only leak when you use them improperly. As a professional who works on plumbing and gas, high density teflon (wrapped properly and an adequate amount of times) and pipe dope never leaks and you get the best of both worlds. You dont have ti worry about misalignment to that degree if youre actually paying attention. A little misallignment correction with tape and dope has never caused any problems for me.
It's a good thread sealant. I saw this video on day one and it reminded me to buy some more. I added it to my Amazon cart on that day. Amazon just notified me today that the original price on Loctite 55 just jumped up $6 more. That's since this video came out. How convenient for the Amazon seller's to get free? advertising and hike the price.
from my understanding,,,nps thread can withstand loosening and maintain seal,,but npt must be secured till tight and any loose turn any degree breaks the seal...
Very interesting Questions: What does it do to the friction (torque) compared to a dry fitting and ptfe? Is this an anaerobic sealant (does it harden in the absence of oxygen, ex 577)?
I mostly use the thread sealant stick 504467. Will give this a try but seems like it's more tedious to apply than the stick. Does it turn to shreds when the fitting is removed like the tape does?
I can't find this on Henkel's US website anywhere. What is the difference between the two Amazon links? As near as I can tell from the inadequate pictures and product description, one maybe has a raised cutter and the other doesn't? Why would I pick one over the other?
Let’s not over think it. As someone else said if applying teflon tape is hard you may need to take some lessons. If you’re wearing vynil gloves that are a little loose you may have to go a little slower. There’s all kinds of stuff out there for different applications. I’ve found the thin white teflon tape works for most threads. If you’re reusing fittings that have been stretched some of the thicker tapes or paste products may be better. As stated in the old days hemp and pipe dope was used especially on large cast iron fittings used in hot water and steam systems.
Over nearly 40 years I've used teflon tape, pipe dope, or silicone, and have yet to have a problem with gas or water. I have more problems with "plumbers" who put freaking teflon tape on everything, whether or not it's required. For what it's worth, in diving, firefighter SBAs, and PCP airguns hold 300 BAR with only hand tight fittings, so obviously plumbing has not kept up with technology.
I'm amazed at the number of people who supposedly have problems with teflon tape. It isn't the tape that is the issue. It's your crappy joint work. Do better work and you don't need "Miracle Cures".
The biggest mistake people make is putting the tape on the wrong way lol. The tape needs go the way its tightened. I've seen many people put it on backwards.
Blue monster teflon and megaloc dope. Always avoid plastic female thread fittings when possible and when necessary go light as possible on tapes or cords
Nothing in this video is sponsored - You can't make your own so if you want to buy some amzn.to/3XfqMZ0
Looks good. Question: your link brings us to the item and it's being sold & shipped by Interfaceglobal. The photos show labels in what I am guessing is German. As a result, the ETA is the middle of September. Is the same stuff you are showing us? Thanks.
Finally. When they started making dental floss out of plastic tape I switched to flossers that still have a string...it's useful now.
The downside is that floss is probably more expensive than the actual sealing cord. lol gotta love hacks that hack your wallet lol
Currently unavailable
Question on your example. You stated 45 degrees but in the video it sure looks like that was a 90 degree adjustment. Do you expect to see a leak with a 90 degree adj?
Why do you keep saying it's important to have no teflon? Teflon MANUFACTURING releases PFAS, not the teflon itself.
As a plumber, i dont use anything else but Loctite 55. It is the best, plain and simple.
My first thought as well, even as a non-plumber! 👌😂
Same here!
mia caught me offgaurd 🤣
Who is she? Is she just a screen grab from a floss product?
He's a man of culture.
@@bikeny yes
@@nils1953 dkm
Silvercymbal more like Silverstein. Porno addict
What's old is new again. Coated hemp cording was used *many* years ago... My grandfather described it to me probably 30+ years ago.
I agree, and the fact they left teflon out was a very smart move
@@shazam6274 Watch the 2019 film Dark Waters and you might rethink that.
@@SilverCymbalIt is PTFE. And currently PTFE cannot be made without the high temperature fluorocarbon surfactants that are on the bad list. The do check the final content. As of a year ago a company in India was almost done with a new process.
pipe fitters at work used to use a teflon thread in the groves with pipe dope over it for a really secure seal.
I have been using this type of sealing (i am not a professional, just for personal applications) for about 10 years, and yeah, this stuff is way better than PTFE tape for water supply.
For better results, try to cover cross-sections not in one spot, but instead all around the thread you're sealing, and don't be afraid of not following the thread, you should better cover all the thread with almost chaotically placed seal. From my understanding, this type of seal works by creating sort of labyrinth between the threads of the pipe and the seal strings itself, thus not allowing water to leak. Compared to the regular PTFE tape, which, once adjusted, starts to leak because there's no labyrinth, and water immediately gets way between thin layers of the tape.
I honestly thought you were gonna use dental floss 😅😅
People have done it with floss, and I have seen it work. BUT they don't tell you its got like a 90% failure rate, I originally was going to try to make my own but it's not worth it. This little bottle would last most people years.
@@SilverCymbalthe inclusion of the floss video was really confusing, I didn't know until the very end that you weren't suggesting it as a replacement for tape. I still don't, now that I read this comment. Is that brand of floss better than tape? Is it made out of the same stuff as the Loctite product?
I have used it. I've kept in in my chemicals cabinet for years. like everything else, I have had it leak. It's really good on "loose" connections. My "go to" is still Teflon tape AND Rectorseal.
I've been a plumber for over 10 years and all I use is hemp and Unipak jointing compound. Works for every usecase, including glycol and doesn't really matter how much you apply it. It can even be undone for several turns and it still wont start leaking. There's a slight learning curve to it but but it's not rocket science. Most important thing is to apply it in the right direction and make sure it doesn't come out during tightering. With smooth threads, such as brass ones it's recommended to scratch them a bit first with a hacksaw blade for example. Helps it grip the hemp.
One time, I was looking for toothpicks and dental floss. I couldn’t find any. There was a toolbox nearby, and I decided to use PTFE tape. Works!
I'm a third generation Master Plumber, I'm sure it works, but Teflon tape a little dope for lubrication on water works perfect keep up the videos!
My sentiments are that I need all the help that I can get. This product is a definite upgrade, worth purchasing.
I use blue monster teflon and never have had a problem. 24 years plumbing.
Yeah been a Diyer for years. That's all I use too. Had 0 leaks. Bluemonster seems thicker than Teflon and extremely durable.
Blue Monster with Megaloc dope, 22 years
Interesting. Once again you have come up with new product that I have never heard of and that is obviously very useful. Thank you sir!
My tankless water heater installer uses it. (EU)
When I asked him about it, he said it was much better than ordinary Teflon tape despite the higher price.
the thread is way more expensive than the tape is... Also I have a pile of the tape since it comes with basically everything plumbing fixture wise.
2:44 You twisted that 90 degrees...
Yes thank you!
Silver Cymbal uses *Metric* degrees, not *Imperial* degrees.
@@simongchadwick He's talking about angle degrees, not temperature degrees.
SC the type of dude to give us 2x effort
Excellent presentation. Thank you. Appreciate you sharing tidbit like this. Loctite has such a vast catalog of interesting stuff and I honestly don't know a fraction of it.
The label at 2:15 suggests the smallest pipe diameter with which this "floss" is compatible is ¹/₂ inch, not ¹/₄ inch.
Reposition up to 45 degrees….moves it 90 degrees anyways.
Exactly what I was thinking. Lol
That proves it is twice as gooder!
@@kmg501 Half as badder
I mean saying Teflon tape is not easy to use is by far the biggest stretch i heard in a while. Once you overlap it once it will not come off, extremely easy unless your a lemon.
Amazing! I had no idea this existed - thanks for the great demonstration!
I was always told tape/dope is a lubricant. While I think this has a lot of legs, a sealing property is always preferred in my book…
I would give it a try. Loctite should sponsor this and give samples…I mean,, I would for a nearly 100mil per year hvac,plumbing company and I buy a lot of stuff….
I can't wait to try it. Once again, you found a great product I never heard of. Thanks!
Always dope then tape for me, just what I was taught as a pipe fitter and it just works.
Teflon tape was never meant to be a sealant. It is a solid lubricant.
All of my company's pipefitters use both tape and dope. I always thought that was strange until they said the same thing, tape is the lubricant not the sealant.
yea, which is why it still gets used on pipe with washer sealers as he got wrong in his other video. It is so you can remove the pipe and it hopefully doesn't get locked together years down the road
This is excellent. I don't have a use for it, but I'm thinking about picking some up just to have for the next time I do. Much appreciated. Thank you!
Thanks for showing this product! Got to go get me some.
0:59 Mia is a well known industry professional with pipe
RectorSeal pipe dope was a favorite in the oilfield. We used soft set so you could break it out later. The hard set would egg a pipe before it would break! 🥵🥵🥵
A single roll for all applications sounds good to me.. I'm like anything that saves space in my ever growing tool box..
I would be willing to try this stuff if I ever saw it in stock, I've never seen or heard of it.
If you know how to properly use the Teflon tape it works just fine and I don't have a problem with leaks. I've been doing this for about 30 years. What I usually do is wrap the pipe threads with the tape and then I apply a thin coat of pipe dope, which is what we call the thread sealant here in the United States. Other parts of the country may use a different terminology, I'm in the Midwest.
One of the main things that you have to do correctly to have success with the tape is to know when to stop tightening the fitting. You have to tighten it far enough but you can't go so far that you end up stuck where you have to back it off. I never back off the fitting, if I estimate incorrectly then I remove the device or fitting and remove the tape and start again.
If you do not wrap the threads correctly with the tape, what happens is as you are tightening it, your fitting just starts pushing the tape off of the threads. This causes you to end up with bare threads that have no tape on them, all the tape that you have applied is completely visible which is not good.
If you do it correctly you will have a layer of Teflon tape covering the threads after you have screwed the piece on. There is more to it than just wrapping it in the correct direction, which is also important to do.
The beginning of the threads should not be wrapped thick at all. If the beginning of the threads are wrapped thick, it will cause the fitting to push the tape right off of the threads and it will just plow the tape right off of the threads and leave them completely bare. There is some level of skill but it's not that complicated. I don't have problems with these pipe thread fittings leaking using tape or a combination of tape and pipe dope.
There has been a quest since even before I started working in the trades to completely eliminate the need for skill at doing skilled labor. This is due to the ongoing quest to be able to do all this work with the lowest paid and unskilled labor possible. This is happening in all areas, plumbing, carpentry, drywall, including the finishing. They want to make it where complete idiots with no skill can do as much of the work as possible.
Don't know how to the simple job of wrapping a pipe with tape and installing a valve without it leaking? Here use this new product, you can be as ham-handed as you want to and it will still work. I'm not a Luddite and I will use new technology, but I still know what they are doing, and the motivation is exactly what I said. If all you have available is regular Teflon tape, you still need to be able to use this approved product and not have leaks in a consistent way.
We use a combination of teflon tape and hemp in our home bathroom. It worked better than just teflon tape.
I'm in Australia. I've never heard of this so just did a quick search and found it is available here and is discounted at the moment. I'm buying some tomorrow. Thanks.
Likewise, and this is perfect timing as just a couple days ago i needed something to seal metal to plastic threads (airbrush fittings).
Often its frustrating when DIY channels from the US use a product that isnt available in Australia, or is way more expensive to source here.
@@westernfrontproductions After my first post yesterday I found Repco is selling it at a discounted price. Bought 3 lots today. should last me a long time.
I don't know if teflon tape in Germany is build differently, but I never got it to seal properly on the first try, so I switched to sealing cord a while ago and it never disappointed me. I even tried teflon tape on the intake and outlet of a pump again after watching your video, but I never got either end to seal completely.
Never tried it but I just bought it using your link. Thanks
I love watching your DYI stuff. Been subbed more than a year now.
Glide has PTFE too
Last year my pops blew my mind by using hemp from horse tail hairs. It still smelled like it too. 🤗😂 I dunno why you're showing us dental floss at all in this video, but the Loctite 55 is awesome! 🤘
I like it. Thx for sharing. Seems expensive at first glance, but I’m reminded how expensive my last leak was…. I guess amazon & loctite are getting more of my $$.
Teflon tape isn't supposed to be the sealing agent. It is supposed to lubricate the threads. The threads in tapered NPT are supposed to deform to create the seal. You need the lubrication to prevent galling. For the most part this also applies to pipe dope. The sealing thread on the other hand is far thicker and is designed to both lubricate and seal. the teflon thread fills the voids and is compressed. When you reposition it can expand enough to keep the void sealed. I need to add some Loctite 55 to my tool bag for certain applications. My go to at work is Loctite 567 thread sealent for most jobs and nickle impregnated teflon tape for stainless. But, to each their own. I'm always game to try new products.
I love the blue leak lock pipe dope. I would eat it if i could😂"not really but i do love it" i dont care if im doing gas fittings, water lines like tub spouts/showerheads or installing a water heater. I grab a jar and i know im set. I worked in 50+ year old apartments and ive never had a leak when first testing like i have with tape. I also have never had a leak from anything installed years later with the blue leak lock. So for me and everyone ive known its basically the best! The only negative is yes its blue and yes it will stain your tools but its thick enough you shouldnt really ever get it on carpet or anything. If you can avoid making a mess with purple pvc primer then leak lock will be a piece of cake. Leak lock isnt as clumpy as the tulype in your video just make sure your stir it with the brush because if its unused or sat awhile the oils will seperate but a couple quick stirs and its mixed. I mean use what you prefer or comfortable with but if you use regular thread tape i can promise you will love leak lock. Its like gold to us😂
**im sure this tooth floss is great maybe even better but im set in my ways and its hard to change whats working perfect for me
Teflon tape is only hard to use if you dont know how to use it, pipe dope is only messy when you use way too much, and either pipe dope or teflon only leak when you use them improperly. As a professional who works on plumbing and gas, high density teflon (wrapped properly and an adequate amount of times) and pipe dope never leaks and you get the best of both worlds. You dont have ti worry about misalignment to that degree if youre actually paying attention. A little misallignment correction with tape and dope has never caused any problems for me.
Agian with the neatest stuff. I don’t see here in Canada other than Amazon and will order. Thanks Chris!!
It's a good thread sealant. I saw this video on day one and it reminded me to buy some more. I added it to my Amazon cart on that day. Amazon just notified me today that the original price on Loctite 55 just jumped up $6 more. That's since this video came out. How convenient for the Amazon seller's to get free? advertising and hike the price.
I got nothing for free. I wasn’t paid for the video and have never spoken to loctite.
Never heard of it, but am going to try it! Thanks for this info!
For years I have been twisting regular plumber's tape to make it into a string. Then I use it similar to the stuff in the video.
Thanks first time hearing about this product. I will purchase for certain.
Thank you for the tip. I found here in Brazil.
from my understanding,,,nps thread can withstand loosening and maintain seal,,but npt must be secured till tight and any loose turn any degree breaks the seal...
I havent come across a smile like Mia’s in quite some time.
@mybipolarbearmax Teeth as white as a pearl necklace!
face only a mother could love
Worth a try.
That thumbnail caught my eye. I’ll be getting that
Very interesting
Questions: What does it do to the friction (torque) compared to a dry fitting and ptfe? Is this an anaerobic sealant (does it harden in the absence of oxygen, ex 577)?
Teflon tape and pipe dope works great old school
You said 45 degrees but then did a 90 degree adjustment 😂
We used this or something very similar when I was in Iraq whenever we had a fuel leak on JP8 fuel trucks
I've had trouble sealing the connection to plastic irrigation valves. This looks like it might solve that problem.
The ironic thing is that some floss was found to contain PFAS. I’m pretty sure it was Glade and some other generic brands.
Good grief! Your kidding right!
I mostly use the thread sealant stick 504467. Will give this a try but seems like it's more tedious to apply than the stick. Does it turn to shreds when the fitting is removed like the tape does?
Good luck using this on stainless to stainless fittings because they will certainly gall long before sealing,
I use a good amount of salt in my pipe thread compound because it creates a lasting bond. While this product break down with the addition of salt?
I can't find this on Henkel's US website anywhere. What is the difference between the two Amazon links? As near as I can tell from the inadequate pictures and product description, one maybe has a raised cutter and the other doesn't? Why would I pick one over the other?
Can you use it on brass gas fittings? Thanks for this info
Dope and tape thanks never had a leak in 37 years.
So it can be used on Brake Lines?
Cool I've mostly been using megaloc (which uses kevlar instead of PTFE) when i can get away with it.
I'm going to get some before I need it.
Let’s not over think it. As someone else said if applying teflon tape is hard you may need to take some lessons. If you’re wearing vynil gloves that are a little loose you may have to go a little slower. There’s all kinds of stuff out there for different applications. I’ve found the thin white teflon tape works for most threads. If you’re reusing fittings that have been stretched some of the thicker tapes or paste products may be better. As stated in the old days hemp and pipe dope was used especially on large cast iron fittings used in hot water
and steam systems.
Packing gland for pipe threads
PTFE is a nasty substance. Thanks for the cool tip 😎
Over nearly 40 years I've used teflon tape, pipe dope, or silicone, and have yet to have a problem with gas or water. I have more problems with "plumbers" who put freaking teflon tape on everything, whether or not it's required.
For what it's worth, in diving, firefighter SBAs, and PCP airguns hold 300 BAR with only hand tight fittings, so obviously plumbing has not kept up with technology.
I use Teflon paste. It's easy and never fails me. But it is a bit mess.
This is almost the same centuries old zinc oxide paste type material that was used with cotton or jute fibre
T Plus 2 home Depot works GREAT
I would probably try it on something for myself before committing to it for my customers.
At :04 and :28 he is wrapping the tape in the wrong direction.
The reason I don't like using this is because the loctite hardens and it's sometimes really difficult to undo the fitting afterwards.
Been using horses to seal pipes for 135 years and not a single pipes has taken a leak on me yet.
I'm amazed at the number of people who supposedly have problems with teflon tape. It isn't the tape that is the issue. It's your crappy joint work. Do better work and you don't need "Miracle Cures".
A lot of examples where the teflon tape is being applied improperly.
Thanks for another great video...
does it work on petroleum gas piping ?
✌️😜 Always something useful for a project now, or future use😁👍 Thanks Brother 💒⚔️ God Bless us All 🇺🇸🙏✝️
Plumbers pipe dope, used it forever!
Been in Canadian heavy industry for 45 years and have never heard of it. Probably illegal up here because no french on the package
THAT LAST VIDEO CLIP YOU PUT IT ON IN THE WRONG DIRECTION
How do you know this is not just strings of Teflon? It sure looks like it.
It helps alot if you actually know how to use tape and dope
Rectorseal Tru Blue, don't glop it on like a knob head. In a restricted space, it's way easier to apply than this floss stuff.
The biggest mistake people make is putting the tape on the wrong way lol. The tape needs go the way its tightened. I've seen many people put it on backwards.
Note to self: Never hire Silver Cymbal for plumbing job.
Better than dope, and home plate is all you should be stealing. 😁
AH, an ad for Loctite.
Looks nice!
Thank you. it seems like it would never work. That's what all the reviews say, and go on to say its awesome
i actually use this as dental floss ...
haven't been to a dentist in years ...
🥴
This was called “Candle Wicking.”
1st link is not available on AMAZON. Tim in northern TN
If you play the video again I was able to add it to the "products" section and I believe its in stock there
Blue monster teflon and megaloc dope. Always avoid plastic female thread fittings when possible and when necessary go light as possible on tapes or cords
Leak lock is the best