I have a Force that’s been collecting dust and I just picked up my first modular setup. PUMPED you made this video as this will be my new setup. Thank you!
@@newday8545 heh mine is not small. You can peep my 2 rigs on modular grid: DJ/Live Performance case: www.modulargrid.net/e/racks/view/1459672 and Production Case: www.modulargrid.net/e/racks/view/1351804
I was about to buy a synth like that and the salesman asked about my set up, got something else. great company, will buy there eventually. Thanks for the data share!
CHEERS. this is one of the main reasons why I bought an mpc. Time to make these Elektron users jealous for once. 😅 mpc makes you work but I think it’s worth it. I can’t wait to master it. Literally anything is possible.
Mr tube DIGGA thank you for your videos man you are a good human being I wish one day you could come here to California and I would show you around you and your family and we can make some good music all I know is because of you thanks to you I know mpcx thanks to you I have learned so much I can only say thanks 🙏
does the force only send note and gate cv signals?? for example, you can't take an LFO from force and send it elsewhere? or can you take an LFO from somewhere else and modulate something in force?
Andrei Lemieux No you can’t do anything with the built in lfos as they exist only in drum programs, clip programs and keygroup programs. They are not available in CV or MIDI programs. You can of course use a gate signal to send a pulse to an external device/parameter etc
I know this is totally of topic tubedigga, but where did you get the alloy pot knobs and encoder for your MPC? Cheers for the vids dude, total font of knowledge 👍
Yes. The envelope follower can be used to modulate mid or CV. Set the Envelope Source field to select the audio signal that will be used as the control signal for the envelope. This can be audio from a track, or, if you choose a Drum track, audio from a specific pad. You can also select the Returns, Submixes, and Master tracks, as well as dedicated LFO (low frequency oscillator) shapes. After selecting the Envelope Source, you can use the additional fields on the left side of the touchscreen to configure the envelope parameters. The available parameters when a track, pad or keygroup is selected as the Envelope Source are as follows: Use the selector below the Envelope Source field to set where the envelope is applied: • Input: The envelope is applied at the audio input source. This option is not available for individual Pads or Keygroups. • Pre-Inserts: The envelope is applied before any insert effects. • Post-Fader: The envelope is applied at the end of the channel strip after any insert effects and after the set volume level. • Playback: The envelope is applied on playback of the selected track. This option is only available for MIDI and CV tracks.
Yo! hows it going bruv? I have a question. I coped a desktop synth and am trying to figure out if i can use the effects in MPC One over the external synth in realtime. cant figure it out. tried to put it through the XY window too but i cant get it to sync. Thank you in advance. peace. i meant to say im trying to use the mixer to add the 4 effects to the synth
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
I have a Force that’s been collecting dust and I just picked up my first modular setup. PUMPED you made this video as this will be my new setup. Thank you!
what kind of modular setup? i just coped a model D on clearance but looking to invest into a small modular rig.
@@newday8545 heh mine is not small. You can peep my 2 rigs on modular grid: DJ/Live Performance case: www.modulargrid.net/e/racks/view/1459672 and Production Case: www.modulargrid.net/e/racks/view/1351804
Tube Digga can you make more videos about this integration and setup with Force.
I was about to buy a synth like that and the salesman asked about my set up, got something else. great company, will buy there eventually. Thanks for the data share!
Which device is easiest to use when recording external synths, the Force or the Mpc X
I use the force with a modular too and it's great. Best groovebox ever for me.
Thanks for the video.
Very Good, explanations
CHEERS. this is one of the main reasons why I bought an mpc. Time to make these Elektron users jealous for once. 😅 mpc makes you work but I think it’s worth it. I can’t wait to master it. Literally anything is possible.
great video...have you any advice on setting the Berhinger crave with a force??,...im almost there with it but im sure im missing something else.
No I have never used the Crave I'm afraid but the same or similar settings should apply.
Mr tube DIGGA thank you for your videos man you are a good human being I wish one day you could come here to California and I would show you around you and your family and we can make some good music all I know is because of you thanks to you I know mpcx thanks to you I have learned so much I can only say thanks 🙏
erick contreras Nice one appreciate the words Erick! 👊🔥🔥
No precount for audio recording on FORCE???
Hello, can you slave the AKAI Force to an E-RM multiclock without any problems ?
Yes, I had one and it worked fine with my Force and MC909
@@TUBEDIGGA thank you
does the force only send note and gate cv signals??
for example, you can't take an LFO from force and send it elsewhere? or can you take an LFO from somewhere else and modulate something in force?
Andrei Lemieux No you can’t do anything with the built in lfos as they exist only in drum programs, clip programs and keygroup programs. They are not available in CV or MIDI programs. You can of course use a gate signal to send a pulse to an external device/parameter etc
This is all jargon for a newbie haha I’m struggling with an behringer crave and an akai force. It’s impossible
I feel your pain! I just got a Force and it *scares* me :)
I know this is totally of topic tubedigga, but where did you get the alloy pot knobs and encoder for your MPC? Cheers for the vids dude, total font of knowledge 👍
Chris Knights www.mpcstuff.com
Can u out put lfos over CV from push to the syth
Yes. The envelope follower can be used to modulate mid or CV.
Set the Envelope Source field to select the audio signal that will be used as the control signal for the envelope. This can be audio from a track, or, if you choose a Drum track, audio from a specific pad. You can also select the Returns, Submixes, and Master tracks, as well as dedicated LFO (low frequency oscillator) shapes.
After selecting the Envelope Source, you can use the additional fields on the left side of the touchscreen to configure the envelope parameters. The available parameters when a track, pad or keygroup is selected as the Envelope Source are as follows:
Use the selector below the Envelope Source field to set where the envelope is applied:
• Input: The envelope is applied at the audio input source. This option is not available for individual Pads or Keygroups.
• Pre-Inserts: The envelope is applied before any insert effects.
• Post-Fader: The envelope is applied at the end of the channel strip after any insert effects and after the set
volume level.
• Playback: The envelope is applied on playback of the selected track. This option is only available for MIDI and CV tracks.
Yo! hows it going bruv? I have a question. I coped a desktop synth and am trying to figure out if i can use the effects in MPC One over the external synth in realtime. cant figure it out. tried to put it through the XY window too but i cant get it to sync. Thank you in advance. peace. i meant to say im trying to use the mixer to add the 4 effects to the synth
You need to add the effects to the sampler and switch on the monitor and be sending midi clock out to the synth
@@TUBEDIGGA thanks man. ill give it a go when i get home. i appreciate it homie. 🤘
I’m getting ready to sell my Force because it doesn’t what Akai promised it would do.
Johnny Parker lol
it probably will.its akai. it's new. it will take a few updates. what specifically doesn't it do that they said it would.
+1 Frazer Thomas ..."what specifically doesn't it do that they said it would"
@@digitaldiezel5870 prolly king of the berghain as they dont do pads... 😂
@@TheMasterZoran never sold it and I'm on the beta so I was always alert of the updates. Great machine!
👌👌👌👌
Force is too big for Ikea stand :D Live fits in a little bit perfect :D
Ikea stand works fine for me
This Ikea hack works great as a stand for the Force (and other gear). ruclips.net/video/TaJHy8MTfGc/видео.html
A bit loud eh? I fkn jumped my friend...