Thank you so much for this video. I've done many brake pads before but never dealt with my car having a parking brake maintenance mode. I would've definitely missed this step.
Great video... I was almost scared away from attempting to do the job myself, because a guy at O'Reilly's told me I needed to have a $3000 computer to send the codes to release the calipers. Glad I didn't listen to him. I followed the steps exactly as you presented them, and I was done with both rears in about two hours. Thanks!
So i have 2016 ford edge titanium. New rotor and pads and didnt turn pistion back in to the caliper. Does this reset the caliper pressures back to normal by doing this? I currently have grinding noise when driving because its applying pressure for the old brakes.
@@tylertroxel1360 as soon as you push on the brakes for the first time, it goes back to where it should be, regardless of if you pushed the piston in or not. You are only pushing the piston in to allow the new pads fit as the new pads are thicker and not worn down. I would ensure the pads are facing the rotor and not in backwards. If you didn’t turn off the power brake system and put it into park brake maintenance mode, it may have damaged the system
Do you actually have to do that “Park brake maintenance” on a 2018 2.0L? I’m about to attempt that and see but I don’t have all those fancy electronics in mine. That looks like the titanium edge
If you have the electronic parking brake it will need to be in that mode for the rear brakes ruclips.net/video/o96dESwMvF0/видео.htmlsi=sDvw9whLRViiq1nZ
Do you actually have to do that “Park brake maintenance” on a 2018 2.0L? I’m about to attempt that and see but I don’t have all those fancy electronics in mine. That looks like the titanium edge Edit: Yes this goes for the 2.0 plain ecoboost as well
If you have the electronic parking brake it will need to be in that mode for the rear brakes ruclips.net/video/o96dESwMvF0/видео.htmlsi=sDvw9whLRViiq1nZ
@ yessir you were correct. I got the parking brake maintenance mode to pop up but just wondered if I should leave my car turned on in accessory mode while I perform the brake change
have a 2020 Nautilus which takes the same pads and rotors can I assume the replacement is the same? Also do you have a recomendation on a brand of pads and rotors ? thanks
I imagine it’s the same process. As long as you get the top quality at the parts store, most work just fine. These were the duralast gold from autozone.
Great video, helped a lot. One minor detail...turn the switch on, then do the pedal and parking brake button, then it's "off and on" instead of "on and off".
Want to add that when you put the new pads in, the notches in the caliper piston are supposed to line up with the raised dots on the pad. I’ve heard if that’s not lined up the pad will wear unevenly.
If you have the electronic parking brake it will need to be in that mode for the rear brakes ruclips.net/video/o96dESwMvF0/видео.htmlsi=sDvw9whLRViiq1nZ
Yes, 7mm for rear, 11mm for the front. My Amazon affiliate link has both 11mm Hex socket (front Brakes) amzn.to/4a2B0zA 7mm Hex socket (rear brakes) amzn.to/3Vc14UK Hex socket set 2mm-14mm amzn.to/3VdPEzM
Be careful with using an impact to loosen these ford luggage nuts. They have an aluminum cap that if it heats up from the impact hammering away it could deform and get stuck on. Always break them loose like ypu didn't to extend the life of them.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Thank you so much for this video. I've done many brake pads before but never dealt with my car having a parking brake maintenance mode. I would've definitely missed this step.
Great video... I was almost scared away from attempting to do the job myself, because a guy at O'Reilly's told me I needed to have a $3000 computer to send the codes to release the calipers. Glad I didn't listen to him. I followed the steps exactly as you presented them, and I was done with both rears in about two hours. Thanks!
Hey man that was the easiest set of brakes I have ever dealt with , great video..thanks
I'm glad you showed everthing needed and how to do it. These new brakes are unnecessarily difficult because of new engineering.
great video helped me and my daughter get the job done together.!!!
great vid would just like to put out there autozone has what is basically a free rental on the brake tool.
Great video. Short and to the point. Excellent job...
So i have 2016 ford edge titanium. New rotor and pads and didnt turn pistion back in to the caliper. Does this reset the caliper pressures back to normal by doing this? I currently have grinding noise when driving because its applying pressure for the old brakes.
@@tylertroxel1360 as soon as you push on the brakes for the first time, it goes back to where it should be, regardless of if you pushed the piston in or not. You are only pushing the piston in to allow the new pads fit as the new pads are thicker and not worn down. I would ensure the pads are facing the rotor and not in backwards. If you didn’t turn off the power brake system and put it into park brake maintenance mode, it may have damaged the system
Would anyone have the torque values for the guide pins and caliper bracket bolts ?
Used you links, thnx for the detailed steps.
What is the specific type of brake fluid?
Thank you for your knowledge and expertise
Checked the description and no torque specifications :(
Google my friend.
Do you actually have to do that “Park brake maintenance” on a 2018 2.0L?
I’m about to attempt that and see but I don’t have all those fancy electronics in mine. That looks like the titanium edge
If you have the electronic parking brake it will need to be in that mode for the rear brakes
ruclips.net/video/o96dESwMvF0/видео.htmlsi=sDvw9whLRViiq1nZ
Why do some pistons need to twist to collapse and some dont?
I’m not sure why they have the 2 different styles. It’s usually on rear brakes but I’ve seen the same model of car have one and the other
I think its to keep you from over opening them and causing damage
Do you actually have to do that “Park brake maintenance” on a 2018 2.0L?
I’m about to attempt that and see but I don’t have all those fancy electronics in mine. That looks like the titanium edge
Edit: Yes this goes for the 2.0 plain ecoboost as well
If you have the electronic parking brake it will need to be in that mode for the rear brakes
ruclips.net/video/o96dESwMvF0/видео.htmlsi=sDvw9whLRViiq1nZ
@ yessir you were correct. I got the parking brake maintenance mode to pop up but just wondered if I should leave my car turned on in accessory mode while I perform the brake change
@ I don’t believe it’s necessary and could drain the battery. Once complete, take it out of maintenance mode as shown in the video.
@ that’s exactly what I was thinking! I did right then. Thank you for making this video, I love learning and I love my Edge.
have a 2020 Nautilus which takes the same pads and rotors can I assume the replacement is the same? Also do you have a recomendation on a brand of pads and rotors ? thanks
I imagine it’s the same process. As long as you get the top quality at the parts store, most work just fine. These were the duralast gold from autozone.
I've had bad luck with rotors at AutoZone, even with the "Gold" level. Their pads are fine, rotors are bad news.
Great video, helped a lot. One minor detail...turn the switch on, then do the pedal and parking brake button, then it's "off and on" instead of "on and off".
Yeah. I said that backwards
that was dope, these newer electronic park brake can be a struggle if you dont know what you doing
Agreed. I didn’t even know that part of the process existed. I just left my e-brake on and took the tires off the first few times
Looks relatively easily...😊
Any updates on the Tundra.... and did you sell off the Denali....Thanks
Love the tundra. Looking at sequoias.
Want to add that when you put the new pads in, the notches in the caliper piston are supposed to line up with the raised dots on the pad. I’ve heard if that’s not lined up the pad will wear unevenly.
Do I leave my car on??
If you have the electronic parking brake it will need to be in that mode for the rear brakes
ruclips.net/video/o96dESwMvF0/видео.htmlsi=sDvw9whLRViiq1nZ
Thank you
Is it a hex socket you used? What year is this Edge? My wife's is a 2018
Yes, 7mm for rear, 11mm for the front. My Amazon affiliate link has both
11mm Hex socket (front Brakes) amzn.to/4a2B0zA
7mm Hex socket (rear brakes) amzn.to/3Vc14UK
Hex socket set 2mm-14mm amzn.to/3VdPEzM
@dannyjohnsonsgarage I bought that EXACT Hex kit a few days ago lol. Awesome kit, doing my wife's for the first time tomorrow.
Thank you👍🏽
This is a good looking lil crossover
Be careful with using an impact to loosen these ford luggage nuts. They have an aluminum cap that if it heats up from the impact hammering away it could deform and get stuck on. Always break them loose like ypu didn't to extend the life of them.