Hope you enjoyed this video and happy you are now in the comments section! Please checkout my new store coming very soon - Sign Up Here! www.time-tees.com/ My tool affiliate links page. Items do not cost you any more and I earn a small commission. All tools are hand picked by myself. myretrowatches.com/tool-sale-links/
Very nice video Mike! MY favorite vintage Seiko dive watch. The term Turtle started by the watch cookers from the Phillipines. We called them a UFO case for years and years. Praying for your journey with the PC. Cheers brother, Jim 👍
@MyRetroWatches another great video! Just a beginner myself and enjoy your content!! 👍 Could you possibly give advice about a sekonda watch? Needs new quartz movement but I don't know where to source one. It's number on the back is "remex 132001"... Quite small and kind of diamond shape. Many thanks and enjoyed your content
I seriously doubt the watch was serviced by any Seiko technician. If this was taken to a 'Seiko' shop, they farmed it out to a 'sheep dipper', someone that just opens the case, perhaps removes the dial, and then dunks the whole movement in an ultrasonic 'sheep dip', 'dries it off and then squirts lube in copious amounts where they can reach before closing it up and returning it 'serviced'. A not uncommon occurrence when the watch owners find an 'inexpensive' watch repair facility. You don't always get what you pay for.
@philipgrice1026 Don't be so sure. Even the NJ service center doesn't know what the hell they're doing. Many of these places, authorized service centers hire tinkerer's, with only limited knowledge and even less experience.
Mike please do not sell yourself short, you are not only a "professional" in every sense of the word you are an artist with your abilities to take the old and bring them back to life. Bravo !
Thing is there are hobbyists like me with a passion and people who have trained well and learnt the craft properly. Trust me if a seasoned pro looked at my work they would critique the hell out of it! I have a old friend in his 70s how has done it for 50 years. Whilst he admires what I do he will pick me up on many things, the good thing is he knows I take on board what I am told.
Mike is excellent. I appreciate all he does, and always has the owner in his thoughts, which is a rare trait, considering the many service center technicians that lack that factor.
Retired watchmaker here: IMO the 6309 was the best Seiko automatic they ever made, but it had a problem that cropped up often. The sweep wheel (4th wheel) pivot runs in a plain bushing rather than a jewel. Over time the pivot wears the bushing hole oval in the thrust direction and the watch stops. I always replaced the bushing with a jewel (140/17 IIRC) which is a permanent repair. The third wheel bushing never seems to wear out. Seiko made the same mistake with some of their ladies movements like the 2205, also the 4th wheel but the dial side pivot.
@@nrbudgen yes I have seen worn bushes before but just pushed them out and turned them 90 degrees which seemed to sort them. I still lack a jewelling tool to ream on.
Bloody Hell! Rarely have I seen so many OCD/autistic spectrum blokes sharing the same page and under the same umbrella! I am on it too, and so are two out of my three sons, and we love it! PS: The first watch I worked on was a Citizen Automatic Diver's (bought from new) which was losing 8 seconds in 24 hours, but with a case-back removal tool off Fleabay and a steady hand with a sewing needle, I managed to get it within 2 decimal 3 (2.3) seconds in 24 hours! DIY rules! 🤡 🇬🇧 PPS: On behalf of my autistic 🌈 OCD family (father and sons) thanks for the entertaining and fascinating video!
I am new to this and recently purchased my two sons each a Seiko with a 4R36 movement. I think, to me it looks better than this one. Did I discern correctly or did I miss some important things that make this movement better?
Michael, your reaction to the initial time graph says it all. Having made a few harrowing forays into hobby electronics, I always appreciate your exclamations of surprise, amusement, and frustration as you work on a watch. As the owner of this individual Turtle, I thank you from the bottom of my heart for taking on this job and undoing the incredible botch job they did. Your laughing disbelief at that time graph was cathartic to see and it mirrors my own while I tried to cope with wearing a timepiece that constantly fell so far behind. I've enjoyed watching your previous repairs and It's been a pleasure communicating with you as we lined up this repair. Thank you especially for doing this pro bono. Your love of watches of all sorts shines through in every video and this is a perfect example. You can bet I was the first person signing up to alerts on Time Tees! One last request, though... when you send the watch, can you also send back all that extra oil? At that quantity, it be enough to dump in my car when it's next due for an oil change.
@@jonirons hello Jon. We meet in the comments at last! This watch is a real treat given how good a condition it’s in. As it’s a 77 is also right at the beginning so gives it some provenance ! I’d love to own such a thing . Given what the watch means to you along with how you have been duped by the “professionals”. I feel you have spent enough money and my way of righting the wrong is to not charge you. Karma ! People have been generous to me in the past too so I’m only passing that on. Must be great to see the inner workings of your watch and all the mess cleaned up! I will talk to you more via email Jon. Sit back and enjoy the comments section!
@@MikeB_UKHaha, that extra oil line is gold! 🤣 It's amazing how Michael took your Turtle from a disaster to a masterpiece. You can really feel the relief in your words-his reactions definitely mirror what we all feel watching these botch jobs get undone. And the fact he did it pro bono? Absolute legend. I’m sure your dad is smiling down from above, happy to see the watch finally running right. Cheers to more smooth sailing for your watch (and your car if that oil arrives)! 👏⏱
Man, you’re taking things to a whole new level! It's unreal that Seiko's service charged $300 and still sent the watch back with that much daily loss, but you swoop in like the Yoda of watchmaking and fix it effortlessly. And that new cleaning sequence with the music? Pure genius! You're not just solving watch problems, you're turning it into an art form. Keep raising the bar, both with your skills and your epic video production!
Wow thank you for the compliment. I have don’t cleaning montages many times in my older videos and people like them. I figured the tango suited this one😂 Pleased you enjoyed this video.
Ok so if this had supposed to have been to a Seiko service and it came back in that state, what can the customer do to get their money back? As it obviously wasn't up to any standard. Kudos. 👌
Your are a real gentleman with a heart of gold with values we miss a lot in our modern age not about the money but understanding the sentimental values of a loved one's memory and putting in the extra mile and doing the things that are wright to do, watching and seeing your workmanship and skills are a real pleasure to watch Respect.
I accidentally stumbled across this video and I didn't think I'd watch the entire 56 minutes but I found it fascinating and very relaxing. So good to see such a lovely watch with so much sentimental value restored with such care and attention.
So so nice of you Mike to fix this for John, who got ripped off to pay that kind of money for a terrible service (if you want to call it that). I feel for him and I have the deepest respect for YOU. I had a similar experience with Wittnauer. I sent my dad's 70 year old watch to them for service, it was sent back with nothing done only for them to charge me to say they couldn't service the watch because it was too old! I luckily found a service repair place here in Canada, and they not only fixed my dad's watch but managed to find a new case for it (because the original wouldn't screw shut anymore. They even sent back my dad's original case. What a great place to service a watch, and if I lived in the UK, I would definitely want to look you up to service any of my 14 watches. God bless YOU!!!!
I don't know why I was presented with this video, but it's well worth the money. Almost an hour of fascinating and educational entertainment. I admire the man and his skills.
I remember purchasing my first watch, the Seiko 6309. I too have huge memories that are held within the seconds of time thanks to that movement. I love that watch. I never knew it was called the "turtle". Thank you for educating me today. Watching you work was a pleasure.
My pop passed away back in 1989 and I received his Seiko automatic but it was running extremely fast. I took it to a few jewelers and watch repair shops only to be told it's not worth repairing. Today it still sits in my jewelry box and still runs way too fast. I'll never get rid of it and eventually it will go to my daughter. I love it regardless, so I fully understand this mans sentimental connection to this watch. It's very nice of you to make this situation right.
It’s rubbish that it’s not worth repairing and I hate when I hear this as I hear it a lot. It’s like good watchmakers are snobs and frown on a lowly Seiko yet for you it’s priceless and for them it’s work so if you are prepared to pay their hourly rate then what does it matter. Fast watch is hairspring . A demagnetiser might help
@@MyRetroWatches Thank you for replying! I'll give a demagnetizer a try! Thanks for the info. I happen to think it's a nice watch under any brand name. It's a gold watch with a brown face, day & date at 6 o'clock. It's also kind of a rectangle. Original Seiko two tone band.
I did enjoy this video, for a number of reasons: 1) In my youth, I had a neighbor who was an amateur watchmaker (it was his hobby to 'decompress' from the stress of his day job fixing mainframe computers). I marveled at his desk with it's seemingly 100's of little drawers, his miniature tools (not just screwdrivers and crown vices, he had the tools necessary to make parts he couldn't buy - this was LONG before the 'internet'. He let me watch and even assist in doing some simpler jobs, and instilled in me a love and appreciation for fine timepieces. One of his regular complaints was other repairmen using FAR too much lubrication. Funny that, eh? Must be endemic to the industry. ;-) 2) I have a model of the very watch repaired in this video. I love mine, and bought it new in the late 70's - and it even still has the original rubber wrist strap. And for what it's worth, my experiences with Seiko service centers is disturbingly similar to what your customer suffered, when I can even find one. It's been suggested that I should try looking for Rolex repair centers - as at the time they were still able to do reputable work. Unfortunately, it's been over two decades since the last cleaning and adjustment, so I can't say if that is still true. Mine does run a bit slow, and will occasionally stop if I don't keep active enough, especially since I no longer wear it with any regularity. 3) I enjoy watching someone that's competent in their craft, plus it allowed me to see how things have changed since I was young. Thanks for helping to preserve mechanical timepieces and sharing how it's done.
Well I hope you enjoyed this trip down memory lane. I would have loved to talk to your old neighbour. I do speak to a local watchmaker who is in his early 70s. He shows me a few things to learn from and its always a pleasure to go see him. As for your Seiko, a good indipendant watch repairer is what you need. None of this Authorised places as they are just movement swappers.
If you don’t know what you’re doing, don’t agree to fix a watch, and if you can’t fix it, don’t charge people! Simple. good work, MRW! I don’t think I am alone in wanting to know whether John got his $500 back after showing this video to the service center.
It’s interesting watching you take this apart. I have this same watch. I bought it about 1979 brand new. As far as I know, it was still keeping pretty decent time the last time I wore it a couple years ago. I never had it serviced because I didn’t trust sending it through the mail. I was afraid the post office might lose it. After watching you and several other‘hobbyist’, I think I would trust you guys more than the Seiko service centers.
I so enjoyed this video. It reminds me of my own Seiko watch, which I wore for 30 years until it quit working and I purchased a different watch. After watching this video and others regarding the Seiko movements, I discovered that the problem was with the automatic winding feature, which had stopped working. Since the watch couldn't be manually wound, this was the problem. Thanks to your video, I now know that this can be repaired/serviced and return to working! Thank you so much for your videos. I truly enjoy them!!!
It's been a few years for me and your videos have gotten so much better. Very impressed! Wonderful how you sorted this watch out. I hope someone gets Seiko to see this video and get John refunded for the mess Seiko service center made.
Fascinating look into the heart of this Turtle. Clearly the owner, John found the right man for this job. I recon folks with your skill set might be in a limited supply. Thanks for sharing.
What a great video, I have done my fair share of Seikos, but among those I have never once seen anything like what you came across in that watch. There was a swimming pool of oil in that pallet fork jewel, and everywhere else. It’s so disappointing to see that Seiko charged him what they did and didn’t do anything worthy of the price they charged, but in fact, only made things worse. Thanks for bringing this watch back to life and bringing us a great video of the process.
Thank you. I am a man of principle so when Jon reached out I knew I would be able to fix it so took it on. I don’t do much outside work as this is just a hobby . I do get asked daily though!
@@MyRetroWatches I am the same. I am only a hobbyist and limit my outside work quite a bit. I can certainly understand why you decided to take on this project though.
I threw my last Seko automatic divers watch at a pawn shop for $70 AU...for this very reason!! (Cost me $600 and I declared never to purchase another ....EVER From an old bloke in aUStralia...Thank you so much for sharing your 'hobby' Leonardo had a hobby painting ceilings...I think you are more an artist tha you know mate. The mysterious micro-world of watches is forbidden territory for most but you make it accessible...Thank you so much.
Great video Mike, you did a fabulous job of identifying the evidence that this Seiko Turtle had been fraudulently serviced and charged full horse by an authorized service center, that then refused to regulate the watch. Your skills and experience were a pleasure to see, showcasing your years of horology and watch repair. As a current and past owner of numerous Seiko diver models I was particularly pleased watching your disassembly and servicing, very gracious of you to do this as a favor to the watches owner as well. 🍷
Thank you Mike. Good to be part of your entourage. Been with you and learned so much over the last 3 years.Can do everything that you showed. Understood all. Like you, appalled at the standard of the 'professional'. All the best.
My first time here. What an absolutely ( expletive deleted) marvellous video! Fascinating mechanism beautifully filmed and described. I own one of these fabulous watches which I bought from a tutor and friend in 1982 (?) for a piffling sum, and not knowing it’s provenance. He did say however on offering me this watch ( I had admitted to admiring it ) that ‘it is a ‘useful bargain’. I took him at his word and wore it constantly..including whilst working on customers’ Jaguars in my small business. It gained it’s share of scratches, but always kept time well. It was put in a drawer when the rubberised strap finally succumbed to oil and stress! I have happily re-found it after 40 years and it started ticking nicely after just a few turns of the body! It does bear some slight scars to case and glass, the face and hands are also a little discoloured. I( never imagined these would be available parts! ).You have rekindled my wish to have it restored by someone who takes the care you do! Can you recommend someone please or perhaps like to do it yourself? I imagine you have too many viewers requests already, but any recommendation would be great. Thanks for a truly educational video and commentary. Best wishes from a new subscriber!
This video was very enlightening to watch. It makes me appreciate the precision engineering of timepieces that much more. I know absolutely nothing about watchmaking, but this video caught my eye because I believe I have this same watch, or at least one very similar to it. I bought it at the Navy Exchange on the Naval Amphibious Base in Little Creek, Virginia in the mid to late 70s while stationed there. My job in the Navy kept me in and UNDER the water often, and I wanted a personal (as opposed to Navy issue) dive watch that could accurately track my bottom time. Rolexes were a bit out of my price range. It has served me well for a long, long time. Years later, I bought a nice gold/stainless Tag Heuer dive watch, and the Seiko became my “work” watch. Nowadays, I’m sporting an Apple Watch most of the time, but I’ll occasionally break out the Seiko. It still keeps respectable time, but it does gain a little over the course of the day. That’s OK though. You definitely don’t want a dive watch to be slow in tracking your bottom time :-) Thanks for the great video!
Nice work Mike. For those of you who own vintage Seikos and want to get into the hobby, I have 13 6309 and 7s26 divers and have learned to service them by watching Mike’s instructional videos. Thanks Mike.
My watch was purchased 2 years ago from AMZWATCH and, to this day, it still looks and runs as well as it did the day it arrived. That movement has never missed a beat despite never having been serviced. I can't complain about that.
I have a 6309 that I was bought in June1976 for my 18th birthday. I have had it serviced once or twice, but not for many years. I was given my Grandfathers 7009 once he died. I wear them both. I'm not sure if my Grandfathers has ever been serviced. Staying at an hotel in Carcassonne earlier on this year, the receptionist commented on my Grandfathers watch, stating it was 'Cool'. I've never desired a more expensive watch and even though I could afford one now, I'm happy with the Seiko's.
I bought a new Seiko 7548-700F, one of the brand’s earliest quartz dive watches back in 1980. I used it for diving in California where I lived at the time and for a few trips to the Caribbean. The battery expired three years later, and I took the watch back to the jewelry store I’d purchased it from. The owner said he couldn’t just replace the battery because the seals would need to be replaced (I knew absolutely nothing about watches at the time) and he would need to send it to a Seiko service center. I forget exactly how long Seiko kept the watch for, but it was well over a month. The first thing I noticed when I got the watch back was that the chapter ring was misaligned. I didn’t want to have the watch go back for several more weeks, so I decided to live with it for the time being. The ring is still misaligned and it continues to frustrate me to this day. My advice: if you have a Seiko that needs service, take it to a watchmaker you trust and do not send it to Seiko.
Reminded me of the scratched case back after returning from Seiko service centre. It was my 1st gen Seiko Monster. The first ever Seiko mechanical watch. Obviously the case opening tool slipped and causing the scratches started from the dimples. It’s not easy to get competent wachmaker.
Ah, the Seiko turtle - or very similar ( I don't recall it having a day wheel, but it WAS a long time ago!) - I had one of those in 1968 (ish), but it now resides at the bottom of Lisbon harbour, because the strap snapped when I was on-board my ship. I could see it sinking steadily through the water until it disappeared, and as far as I know, it is still there!
Love your videos Mike! When I was 8 or 9, my grandfather bought me my first watch. Few years later I broke the crystal and took it to the only authorized watchmaker in town. Taking full advantage of the kid customer, the guy gave it back to me without a seconds hand, and the original gold colour crown(which was not damaged), replaced with a huge ugly silver one. I couldn't look at it ever again. I have never trusted anyone with my watches since- I'll rather take my chance and fix them myself. Your channel, and your life story are a real inspiration!
Another great video. What an oil reserve. I have never seen an oiled pallet fork pivot before and the amount of oil is hilarious. Call prevous job a service is a joke. It was a genuine disservice. Shame on Seiko "Service" center. Well done 👍
I believe I have that same watch that was running slow sent it to Seiko got it back still running slow and with a note it is no longer water tight . I haven't worn it in 20 year's . As a retired heavy-duty truck mechanic I'm amazed by "watching" you. Cheers'.
I'm wearing mine right now! Restored it myself, the first watch I've done a full restore on. If even a complete novice like me can restore a rusted hunk, I don't know what's wrong with those Seiko approved guys. Great work on this Mike!
WOW! I HAD A SERVICE EXPERT DO MY TURTLE AND HE SCREWED IT UP! I should ship it to you. One watched video and I TRUST you 100%. Excellent service. Mad skills! Well done!
Don’t laugh. I had a Russian guy walk into my store with his watch that he oiled by pouring some type of oil into it. The dial looked like a bubble level. I was floored.
I took my bell-matic to Seiko for repair. They returned saying it couldn't be fixed. Took it to a retired Seiko service centre watchmaker... & He fixed it!!!!
This comment tells you all you need to know. There are some neysayers in the comments doubting the story of this watch or the authenticty of the service centre. Comments like yours and other stories I know first hand just backup my theory on these authorised places.
I have one of these beauties from 1977 and I'm the original owner and yes it's still running perfect It has obviously been serviced numerous times . I love this watch❤
I have watched a Zillion clips on utube ... your clip kept coming up and I didn't click on it till today ... "Oh My God" I could never have predicted how engrossed I was with how you dealt with the initial issue ... and Bloody Fixed 🎉 ... Wow you said your not a Professional Watch Fixer ... however, you're more than that by a HUGE margin ... your attention to detail is outstanding and extremely rare in this day and age ... for most repairs now days "oh that will do" you pay good money for 3rd rate performance ... I'm sure the recipient when he got his watch back was over the moon ... "SIMPLY VERY WELL DONE" 👍😎👍
What a wonderfully genuine person you are! Love watching these vids. To increase listening pleasure: It's*number of times, *number of people etc not "amounts" 1,2,3, 10 times... that's a number. An amount would be 5 kilograms or 7.5 litres of times, 753 kilograms of people. If you count it, not measure it, then say "number of..."
Brilliant video Mike! My wife is out of town and I could be watching anything on a Friday night and I am watching you restore this man's sentimental beauty! You're amazing!
I'm no watchmaker but still find rebuild videos fascinating, enough to find it astounding that this amateurish mess was ever returned from Seiko. I saw a watch someone had soaked in oil, and it was only little worse than this. What, did the service center turn the new guy loose without checking his work, or is someone getting drunk on the job? Whatever the explanation, Seiko owes somebody.$300 and an apology.
Very well done. I had a 1977 sent to Seko several years ago. Was told that I could not get service not from Seko but their agent who was told. I lost it during a cross country move. Left the box a took the watch. I went to work for a company that wouldn’t allow you to wear a watch as a salesman because if you checked the time your customer might feel like you were rushing them. A good job but a dumb policy. I got the watch because my first sales job encourage us to buy a good watch. I wore that watch 1977-1981 everyday. Then had to stop and never wore one again until Apple Watch and a new job.
WOW...WOW...WOW ❤ IT... WAS SUCH A PLEASURE watchin' you work on this beauty !! Thank you for the patience to show us, in such clarity, though so difficult for you... Much love and the best of wishes to you Sir...from India 🙏🏼
Also a big thank you on showing service and oiling pivots with metal bushings. Think you're the 1st to show. My mom sent me a drawer full of watches; 3 of which are my grandfather's 7J and 1Js. As a follow on Q, many of the quartz watches she sent have no pivot jewels. Do you oil the plastic bushings too?
I remember like yesterday, I managed to find your channel while searching for restoring brushed finishes on cases and bracelets. You were showing a scratch pad (a finishing pad) I was amazed like it was very simple. Today you are competing with professional services actually finding their faults. A lot happened since that day and it is always a pleasure to watch another video of yours Mike. Have a wonderful weekend ahead.
I have a Seiko Arnie which I've had since new. It looks very similar to the Turtle. Its now not my daily use watch. However, it is just sitting in my drawer. The only work its every had done is new batteries and replacement o rings. I used it full time when younger and did all my scuba diving with it on. This watch is almost a chronograph. Sitting in my drawer for two years it was just 5 seconds slow.
I also have an early 80s Turtle (possibly an 81) that was my Dad's daily. It is in almost identical condition as John's, and runs either fast, or slow, by an hour or more per day. I've adjusted it a few times with a phone app and it'll be fine for a week or so, then it becomes possessed again. It clearly needs service, but I have been reluctant to call Seiko for the exact reasons John experienced. It is an heirloom and I don't want to risk it with just anyone. You clearly know how to work with these movements, and I'd love to send mine across the pond to you. I enjoyed this video and learned a lot about this watch. Thanks for posting this!
Super video, well done! very impressed that ypu included the 4 attempts to get the balance jewel back together, would have been so easy to edit it to do it first time! Chapeau!!
After watching this, my thoughts are: "I will probably not be able to do this." There are so many small parts that I would probably forget which go where. I'm an electronics technician and I used to repair TVs, stereos, and similar stuff. After a job, I'd close up the thing and then be left wondering why there's an extra screw on the bench. I'd have to go back and take the thing apart to find where the extra screw goes into. Kudos to your abilities, man. Fantastic stuff.
I used to work at a shop repairing laptops and the extra screw disease went away eventually. Maybe once in a while forgot to install something but not often enough to matter. Sometimes i have to take notes or put in markings when i remove parts, usually i subdivided work in phases and every phase gets its own little compartment for small parts. I have done a handful digicams as well and those are kind of spicy, very layered. I want to try my hand at a very cheap mechanical watch someday and see if i totally mess it up or whether i can put it together again. Totally expect to be very very confused for a while there. But no point selling youself short, right.
Great video as usual, the evidence that it is not always better to bring the watch to the "official" dealer, an independent watchmaker is - in your case - more proficient and less expensive too! Great job and big heart. Thank you for sharing your videos! I own about 12 japanese watches ranging from orient to seiko ones and I've always be pleased with the reliability of these watches, always bring them to a local watchmaker here in Italy. I cannot verify his job, but the watches comes back more accurate and shiny all the times (There is no Seiko dealer here, there is a bigger one at 200km from my home which is too far away. I prefer to bring and get back my watches by hand after servicing/repair).
Watching you strip this watch was truly amazing and educational. How on earth do you remember where every part goes back together? Glad I watched your video. 😊
I love the 6309 look, but because of the rotation it had to be wound each time I wore it. I had a watch maker make it a hybrid 6309-7548. I kept the face from the 7548 and back, and had it relumed with antique color. Now I wear it constantly, more than my father's pogue, and sea dweller. Battery only needs changed once every five years. And we are talking an '85 movement in a '79 body!
Hello from the Netherlands, my name is Jan. It is for me very interesting to see how and with patience you restorate these watches . And also surprised how much information you give us. Myself, I have two Seiko Watches . One the 5 serie and one wonderful in blue. Always running for more than forty years. I wish you much succes in your repairs. Greetings Jan 🌷🌷🌷Netherland
Well, I hope he brings your post to them and gets his money back. Well done again on fixing it. Most times the real value of a watch is in the history of it. Not the money it is worth
You are the 2nd watch resto channel I’ve subbed to and I find your affable demeanor and presentation most engaging. Thank you for taking all the time and effort to create quality content for both enthusiasts and laypeople alike. Keep up the good work mate!
what a great job you did , i have a seiko like that one, still running well, I just really enjoyed watching you video, it was so relaxing and entertaining, I appreciate your patience and calmness , working at this scale is not an easy trick. thanks you for the vid.
You did a solid for the owner but more importantly you did a great job with careful hands. Hope the owner shars with the that hacked it. Thanks for careing.
I have the same story my dad was a diver and this was a anniversary gift from my mom to dad. Dad's passed on and I would love to have mine serviced. I remember a small round depth meter on the strap as a kid,...I wish I still had it but it's gone.
Tremendous save of a memory-laden family treasure, Mike! I always enjoy your videos, but this was really special. Whatever "professional" credits you may lack (I don't see it), you make up for them by being a very good man. Kudos and best wishes from the Sonoran Desert of Arizona! 👏👏 ❤
Hi Michael, my first time on your page. I really enjoyed watching you repair this watch, fascinating. With my very amateur kit I can change batteries and seals but that's about it. The scope you have for regulating the watch is genius. Looking forward to seeing more of you work, it's an absolute pleasure to watch you, pardon the pun.
Hello Mike. Tha same hapends to me with a Seiko Jumbo in Seiko Argentina. The same speach "It's an old movement and we can't service it better". They charged me U$S 250 and it's runninger worst than before: Sh.. on Seiko Services. Superb job and greetings from Argentina. Thanks for the video
I really don't understand how they can call themselves proffessionals when they do such a bad job, they should be ashamed of themselves. Its good that hobbyists like you Mike can straighten out their work. Good job!!
Mike, this was great detail and very insightful; thank you very much. I am just getting a level deeper into collecting and aspire to restore and build as a hobby. As a former EE, I appreciate your detailed and methodical approach. Cheers!
I enjoyed the video and gave it a sub and alike. I went back and re-watched the reassembly of the barrel and I'm still unsure, did you put the original main spring back in? I am so sick of incompetent and/or dishonest people in all sorts of service from watches to cars to home repairs. Kudos to you for making it right and even more so for not charging him. Years ago I had an analog face quartz watch that I wore at work. Being a police officer working rotating shifts I needed a watch I could see during the day and at night so I had one with tritium hands and markers. One day, the watch stopped while was working. Ordinarily, I would open the case and replace the battery myself. But, there was a jewelry store in my area and I wasn't busy so I stopped in to get the battery replaced. The gentleman took my watch in the back, returned a few minutes later, and said he replaced the battery but the watch was broken and wouldn't run. He charged me for the battery and I left. That night I opened the watch up and looking at it under a magnifying glass found that the watch had a coil of fine wire going to a mini circuit board. The wire on one end was broken. There was a scratch going from the area of the battery to the broken wire. I couldn't prove it, but it sure looked to me like he slipped with some tool while replacing the battery and broke the wire.
Another excellent video Mike! So glad to see you could save this one! Sadly, this time of watch work is ramped here in the US. Very hard to find a reputable watchmaker. Looking forward to the next one!!
Before I started to get a little more serious about servicing watches and educating myself I’d swish a movement that wasn’t working or working well in solvent snd then add a must of WD40 over the entire movement and wala! It would occasionally come back to life. I’d imagine many of the watches I then put up for sale looked similar to this one. I apologize for my past behavior! I’ve since gained a bit of knowledge and and greatly enjoying a new hobby and skill set. I want to thank content makes like Mike for my ongoing education!!
Hope you enjoyed this video and happy you are now in the comments section! Please checkout my new store coming very soon - Sign Up Here! www.time-tees.com/ My tool affiliate links page. Items do not cost you any more and I earn a small commission. All tools are hand picked by myself. myretrowatches.com/tool-sale-links/
Very nice video Mike! MY favorite vintage Seiko dive watch. The term Turtle started by the watch cookers from the Phillipines. We called them a UFO case for years and years. Praying for your journey with the PC. Cheers brother, Jim 👍
@MyRetroWatches another great video! Just a beginner myself and enjoy your content!! 👍
Could you possibly give advice about a sekonda watch? Needs new quartz movement but I don't know where to source one. It's number on the back is "remex 132001"... Quite small and kind of diamond shape. Many thanks and enjoyed your content
@@MyRetroWatches Thanks Mike👍
I seriously doubt the watch was serviced by any Seiko technician. If this was taken to a 'Seiko' shop, they farmed it out to a 'sheep dipper', someone that just opens the case, perhaps removes the dial, and then dunks the whole movement in an ultrasonic 'sheep dip', 'dries it off and then squirts lube in copious amounts where they can reach before closing it up and returning it 'serviced'. A not uncommon occurrence when the watch owners find an 'inexpensive' watch repair facility. You don't always get what you pay for.
@philipgrice1026 Don't be so sure. Even the NJ service center doesn't know what the hell they're doing. Many of these places, authorized service centers hire tinkerer's, with only limited knowledge and even less experience.
Mike please do not sell yourself short, you are not only a "professional" in every sense of the word you are an artist with your abilities to take the old and bring them back to life. Bravo !
Thing is there are hobbyists like me with a passion and people who have trained well and learnt the craft properly. Trust me if a seasoned pro looked at my work they would critique the hell out of it! I have a old friend in his 70s how has done it for 50 years. Whilst he admires what I do he will pick me up on many things, the good thing is he knows I take on board what I am told.
Mike is excellent. I appreciate all he does, and always has the owner in his thoughts, which is a rare trait, considering the many service center technicians that lack that factor.
Retired watchmaker here: IMO the 6309 was the best Seiko automatic they ever made, but it had a problem that cropped up often. The sweep wheel (4th wheel) pivot runs in a plain bushing rather than a jewel. Over time the pivot wears the bushing hole oval in the thrust direction and the watch stops. I always replaced the bushing with a jewel (140/17 IIRC) which is a permanent repair. The third wheel bushing never seems to wear out. Seiko made the same mistake with some of their ladies movements like the 2205, also the 4th wheel but the dial side pivot.
@@nrbudgen yes I have seen worn bushes before but just pushed them out and turned them 90 degrees which seemed to sort them. I still lack a jewelling tool to ream on.
Bloody Hell! Rarely have I seen so many OCD/autistic spectrum blokes sharing the same page and under the same umbrella! I am on it too, and so are two out of my three sons, and we love it!
PS: The first watch I worked on was a Citizen Automatic Diver's (bought from new) which was losing 8 seconds in 24 hours, but with a case-back removal tool off Fleabay and a steady hand with a sewing needle, I managed to get it within 2 decimal 3 (2.3) seconds in 24 hours! DIY rules! 🤡 🇬🇧
PPS: On behalf of my autistic 🌈 OCD family (father and sons) thanks for the entertaining and fascinating video!
Very interesting! What about the 7s26 movement? Does it have the same problem?
I am new to this and recently purchased my two sons each a Seiko with a 4R36 movement. I think, to me it looks better than this one. Did I discern correctly or did I miss some important things that make this movement better?
@@Rick-ve5lx None of the movements based on the old 7006, including the 7S26, have this problem.
Michael, your reaction to the initial time graph says it all. Having made a few harrowing forays into hobby electronics, I always appreciate your exclamations of surprise, amusement, and frustration as you work on a watch. As the owner of this individual Turtle, I thank you from the bottom of my heart for taking on this job and undoing the incredible botch job they did. Your laughing disbelief at that time graph was cathartic to see and it mirrors my own while I tried to cope with wearing a timepiece that constantly fell so far behind. I've enjoyed watching your previous repairs and It's been a pleasure communicating with you as we lined up this repair. Thank you especially for doing this pro bono. Your love of watches of all sorts shines through in every video and this is a perfect example. You can bet I was the first person signing up to alerts on Time Tees!
One last request, though... when you send the watch, can you also send back all that extra oil? At that quantity, it be enough to dump in my car when it's next due for an oil change.
@@jonirons hello Jon. We meet in the comments at last! This watch is a real treat given how good a condition it’s in. As it’s a 77 is also right at the beginning so gives it some provenance ! I’d love to own such a thing .
Given what the watch means to you along with how you have been duped by the “professionals”. I feel you have spent enough money and my way of righting the wrong is to not charge you. Karma !
People have been generous to me in the past too so I’m only passing that on.
Must be great to see the inner workings of your watch and all the mess cleaned up!
I will talk to you more via email Jon. Sit back and enjoy the comments section!
I really hope you go back to Seiko, armed with this video, and demand a full refund. A disgusting rip-off.
@@MikeB_UKHaha, that extra oil line is gold! 🤣 It's amazing how Michael took your Turtle from a disaster to a masterpiece. You can really feel the relief in your words-his reactions definitely mirror what we all feel watching these botch jobs get undone. And the fact he did it pro bono? Absolute legend. I’m sure your dad is smiling down from above, happy to see the watch finally running right. Cheers to more smooth sailing for your watch (and your car if that oil arrives)! 👏⏱
Seiko is the reason why the price of oil is so high!
Correction..
The seiko servicing center that farms out to unqualified repair outfits is the root cause for the oil slick..
Man, you’re taking things to a whole new level! It's unreal that Seiko's service charged $300 and still sent the watch back with that much daily loss, but you swoop in like the Yoda of watchmaking and fix it effortlessly. And that new cleaning sequence with the music? Pure genius! You're not just solving watch problems, you're turning it into an art form. Keep raising the bar, both with your skills and your epic video production!
Wow thank you for the compliment. I have don’t cleaning montages many times in my older videos and people like them. I figured the tango suited this one😂
Pleased you enjoyed this video.
@@MyRetroWatches You KNOW - when youve been tango'd lol...liked and subscribed.😊
Seiko had t charge for the oil they used ! 😅
Ok so if this had supposed to have been to a Seiko service and it came back in that state, what can the customer do to get their money back? As it obviously wasn't up to any standard. Kudos. 👌
Your are a real gentleman with a heart of gold with values we miss a lot in our modern age not about the money but understanding the sentimental values of a loved one's memory and putting in the extra mile and doing the things that are wright to do, watching and seeing your workmanship and skills are a real pleasure to watch Respect.
Well said M8
@@bee17167 thank you. Your comment is appreciated.
I accidentally stumbled across this video and I didn't think I'd watch the entire 56 minutes but I found it fascinating and very relaxing. So good to see such a lovely watch with so much sentimental value restored with such care and attention.
@@PaulB-yb8tw really pleased you enjoyed it and came along for the journey. You might never look at a mechanical watch the same now.
Well done Mike, I'd be sending a stinking email to that Seiko crowd and demanding my money back!. Thanks. Adrian
Could you share the details of the Seiko’s authorised centre that has scammed you?
@@yashinisukiThe owner's name is John. Watch the entire video to find out...
With a link to this video & a request that a small claim will be going in to a local court unless a full refund is forthcoming.
So so nice of you Mike to fix this for John, who got ripped off to pay that kind of money for a terrible service (if you want to call it that). I feel for him and I have the deepest respect for YOU. I had a similar experience with Wittnauer. I sent my dad's 70 year old watch to them for service, it was sent back with nothing done only for them to charge me to say they couldn't service the watch because it was too old! I luckily found a service repair place here in Canada, and they not only fixed my dad's watch but managed to find a new case for it (because the original wouldn't screw shut anymore. They even sent back my dad's original case. What a great place to service a watch, and if I lived in the UK, I would definitely want to look you up to service any of my 14 watches. God bless YOU!!!!
I don't know why I was presented with this video, but it's well worth the money. Almost an hour of fascinating and educational entertainment. I admire the man and his skills.
Thank you very much. The algorithm works in mysterious ways and for once it’s pushing one of my videos. Pleased you enjoyed it.
I remember purchasing my first watch, the Seiko 6309. I too have huge memories that are held within the seconds of time thanks to that movement. I love that watch. I never knew it was called the "turtle". Thank you for educating me today. Watching you work was a pleasure.
My pop passed away back in 1989 and I received his Seiko automatic but it was running extremely fast. I took it to a few jewelers and watch repair shops only to be told it's not worth repairing. Today it still sits in my jewelry box and still runs way too fast. I'll never get rid of it and eventually it will go to my daughter. I love it regardless, so I fully understand this mans sentimental connection to this watch. It's very nice of you to make this situation right.
It’s rubbish that it’s not worth repairing and I hate when I hear this as I hear it a lot. It’s like good watchmakers are snobs and frown on a lowly Seiko yet for you it’s priceless and for them it’s work so if you are prepared to pay their hourly rate then what does it matter.
Fast watch is hairspring . A demagnetiser might help
I was going to say it's magnetised but Mike has already told you
@@MyRetroWatches Thank you for replying! I'll give a demagnetizer a try! Thanks for the info. I happen to think it's a nice watch under any brand name. It's a gold watch with a brown face, day & date at 6 o'clock. It's also kind of a rectangle. Original Seiko two tone band.
One possible solution is to take a vacation to a "low cost country" and have the watch serviced while you're there.
Can you tell us the caliber and model number on the back and the first two digits of the serial number? Caliber should be four digits then a hyphen.
I did enjoy this video, for a number of reasons:
1) In my youth, I had a neighbor who was an amateur watchmaker (it was his hobby to 'decompress' from the stress of his day job fixing mainframe computers). I marveled at his desk with it's seemingly 100's of little drawers, his miniature tools (not just screwdrivers and crown vices, he had the tools necessary to make parts he couldn't buy - this was LONG before the 'internet'. He let me watch and even assist in doing some simpler jobs, and instilled in me a love and appreciation for fine timepieces. One of his regular complaints was other repairmen using FAR too much lubrication. Funny that, eh? Must be endemic to the industry. ;-)
2) I have a model of the very watch repaired in this video. I love mine, and bought it new in the late 70's - and it even still has the original rubber wrist strap. And for what it's worth, my experiences with Seiko service centers is disturbingly similar to what your customer suffered, when I can even find one. It's been suggested that I should try looking for Rolex repair centers - as at the time they were still able to do reputable work. Unfortunately, it's been over two decades since the last cleaning and adjustment, so I can't say if that is still true. Mine does run a bit slow, and will occasionally stop if I don't keep active enough, especially since I no longer wear it with any regularity.
3) I enjoy watching someone that's competent in their craft, plus it allowed me to see how things have changed since I was young. Thanks for helping to preserve mechanical timepieces and sharing how it's done.
Well I hope you enjoyed this trip down memory lane. I would have loved to talk to your old neighbour. I do speak to a local watchmaker who is in his early 70s. He shows me a few things to learn from and its always a pleasure to go see him.
As for your Seiko, a good indipendant watch repairer is what you need. None of this Authorised places as they are just movement swappers.
If you don’t know what you’re doing, don’t agree to fix a watch, and if you can’t fix it, don’t charge people! Simple. good work, MRW!
I don’t think I am alone in wanting to know whether John got his $500 back after showing this video to the service center.
It’s interesting watching you take this apart. I have this same watch. I bought it about 1979 brand new. As far as I know, it was still keeping pretty decent time the last time I wore it a couple years ago. I never had it serviced because I didn’t trust sending it through the mail. I was afraid the post office might lose it. After watching you and several other‘hobbyist’, I think I would trust you guys more than the Seiko service centers.
I so enjoyed this video. It reminds me of my own Seiko watch, which I wore for 30 years until it quit working and I purchased a different watch. After watching this video and others regarding the Seiko movements, I discovered that the problem was with the automatic winding feature, which had stopped working. Since the watch couldn't be manually wound, this was the problem. Thanks to your video, I now know that this can be repaired/serviced and return to working! Thank you so much for your videos. I truly enjoy them!!!
It's been a few years for me and your videos have gotten so much better. Very impressed! Wonderful how you sorted this watch out. I hope someone gets Seiko to see this video and get John refunded for the mess Seiko service center made.
Thank you very much!
Seiko 6306 diver from 1979, been my daily wear for years, love it.
Fascinating look into the heart of this Turtle. Clearly the owner, John found the right man for this job. I recon folks with your skill set might be in a limited supply. Thanks for sharing.
What a great video, I have done my fair share of Seikos, but among those I have never once seen anything like what you came across in that watch. There was a swimming pool of oil in that pallet fork jewel, and everywhere else. It’s so disappointing to see that Seiko charged him what they did and didn’t do anything worthy of the price they charged, but in fact, only made things worse. Thanks for bringing this watch back to life and bringing us a great video of the process.
Thank you. I am a man of principle so when Jon reached out I knew I would be able to fix it so took it on. I don’t do much outside work as this is just a hobby . I do get asked daily though!
@@MyRetroWatches I am the same. I am only a hobbyist and limit my outside work quite a bit. I can certainly understand why you decided to take on this project though.
I threw my last Seko automatic divers watch at a pawn shop for $70 AU...for this very reason!! (Cost me $600 and I declared never to purchase another ....EVER
From an old bloke in aUStralia...Thank you so much for sharing your 'hobby' Leonardo had a hobby painting ceilings...I think you are more an artist tha you know mate. The mysterious micro-world of watches is forbidden territory for most but you make it accessible...Thank you so much.
Great video Mike, you did a fabulous job of identifying the evidence that this Seiko Turtle had been fraudulently serviced and charged full horse by an authorized service center, that then refused to regulate the watch. Your skills and experience were a pleasure to see, showcasing your years of horology and watch repair. As a current and past owner of numerous Seiko diver models I was particularly pleased watching your disassembly and servicing, very gracious of you to do this as a favor to the watches owner as well. 🍷
Thank you.
Thank you Mike. Good to be part of your entourage. Been with you and learned so much over the last 3 years.Can do everything that you showed. Understood all. Like you, appalled at the standard of the 'professional'. All the best.
Thanks Ross. Good to hear from you again. Pleased to read your repair work is getting good! Well done
Great job, that service centre really butchered that watch, should be held accountable. Great result by you,
My first time here. What an absolutely ( expletive deleted) marvellous video! Fascinating mechanism beautifully filmed and described. I own one of these fabulous watches which I bought from a tutor and friend in 1982 (?) for a piffling sum, and not knowing it’s provenance. He did say however on offering me this watch ( I had admitted to admiring it ) that ‘it is a ‘useful bargain’. I took him at his word and wore it constantly..including whilst working on customers’ Jaguars in my small business. It gained it’s share of scratches, but always kept time well. It was put in a drawer when the rubberised strap finally succumbed to oil and stress! I have happily re-found it after 40 years and it started ticking nicely after just a few turns of the body! It does bear some slight scars to case and glass, the face and hands are also a little discoloured. I( never imagined these would be available parts! ).You have rekindled my wish to have it restored by someone who takes the care you do! Can you recommend someone please or perhaps like to do it yourself? I imagine you have too many viewers requests already, but any recommendation would be great. Thanks for a truly educational video and commentary. Best wishes from a new subscriber!
This randomly popped up on my feed, found it fascinating, thank you so much
Glad you enjoyed it!
This video was very enlightening to watch. It makes me appreciate the precision engineering of timepieces that much more. I know absolutely nothing about watchmaking, but this video caught my eye because I believe I have this same watch, or at least one very similar to it. I bought it at the Navy Exchange on the Naval Amphibious Base in Little Creek, Virginia in the mid to late 70s while stationed there. My job in the Navy kept me in and UNDER the water often, and I wanted a personal (as opposed to Navy issue) dive watch that could accurately track my bottom time. Rolexes were a bit out of my price range. It has served me well for a long, long time. Years later, I bought a nice gold/stainless Tag Heuer dive watch, and the Seiko became my “work” watch. Nowadays, I’m sporting an Apple Watch most of the time, but I’ll occasionally break out the Seiko. It still keeps respectable time, but it does gain a little over the course of the day. That’s OK though. You definitely don’t want a dive watch to be slow in tracking your bottom time :-) Thanks for the great video!
Nice work Mike. For those of you who own vintage Seikos and want to get into the hobby, I have 13 6309 and 7s26 divers and have learned to service them by watching Mike’s instructional videos. Thanks Mike.
Well done, Mike. You are not a hobbyist! I was cringing at so much oil. I knew you were going to rescue it. John is going to love it.
My watch was purchased 2 years ago from AMZWATCH and, to this day, it still looks and runs as well as it did the day it arrived. That movement has never missed a beat despite never having been serviced. I can't complain about that.
First time watching I enjoyed the entire episode. Thank you for being so generous with your time and skillset.
I have a 6309 that I was bought in June1976 for my 18th birthday. I have had it serviced once or twice, but not for many years. I was given my Grandfathers 7009 once he died. I wear them both. I'm not sure if my Grandfathers has ever been serviced. Staying at an hotel in Carcassonne earlier on this year, the receptionist commented on my Grandfathers watch, stating it was 'Cool'. I've never desired a more expensive watch and even though I could afford one now, I'm happy with the Seiko's.
Dang Seiko, way to take care of John's turtle. Mr. Hattori would not be pleased.
They should give him his money back, that isn't right.
Purchased a turtle years ago, they are a very comfortable watch to wear and excellent value for money.
I now want one. But I have to stop buying watches …! (Nah)
I bought a new Seiko 7548-700F, one of the brand’s earliest quartz dive watches back in 1980. I used it for diving in California where I lived at the time and for a few trips to the Caribbean. The battery expired three years later, and I took the watch back to the jewelry store I’d purchased it from. The owner said he couldn’t just replace the battery because the seals would need to be replaced (I knew absolutely nothing about watches at the time) and he would need to send it to a Seiko service center. I forget exactly how long Seiko kept the watch for, but it was well over a month. The first thing I noticed when I got the watch back was that the chapter ring was misaligned. I didn’t want to have the watch go back for several more weeks, so I decided to live with it for the time being. The ring is still misaligned and it continues to frustrate me to this day. My advice: if you have a Seiko that needs service, take it to a watchmaker you trust and do not send it to Seiko.
Reminded me of the scratched case back after returning from Seiko service centre. It was my 1st gen Seiko Monster. The first ever Seiko mechanical watch.
Obviously the case opening tool slipped and causing the scratches started from the dimples.
It’s not easy to get competent wachmaker.
Ah, the Seiko turtle - or very similar ( I don't recall it having a day wheel, but it WAS a long time ago!) - I had one of those in 1968 (ish), but it now resides at the bottom of Lisbon harbour, because the strap snapped when I was on-board my ship. I could see it sinking steadily through the water until it disappeared, and as far as I know, it is still there!
So sorry for your loss Sir... I feel for you 😢
Mine is off the Shieks beach in Bahreign in 68 😮
Love your videos Mike! When I was 8 or 9, my grandfather bought me my first watch. Few years later I broke the crystal and took it to the only authorized watchmaker in town. Taking full advantage of the kid customer, the guy gave it back to me without a seconds hand, and the original gold colour crown(which was not damaged), replaced with a huge ugly silver one. I couldn't look at it ever again. I have never trusted anyone with my watches since- I'll rather take my chance and fix them myself.
Your channel, and your life story are a real inspiration!
Another great video. What an oil reserve. I have never seen an oiled pallet fork pivot before and the amount of oil is hilarious. Call prevous job a service is a joke. It was a genuine disservice. Shame on Seiko "Service" center. Well done 👍
They must have thought: drying of oil slows down the watch, so let's just add more of it.😂
I believe I have that same watch that was running slow sent it to Seiko got it back still running slow and with a note it is no longer water tight . I haven't worn it in 20 year's . As a retired heavy-duty truck mechanic I'm amazed by "watching" you. Cheers'.
Well trust me your watch in the right hands would work perfectly.
Hi Mike, always a pleasure to see a new video. I hope the guys at the SSC watch this video and maybe learn something from it
Great video! Very nice! Thank you for the many "firsts".
Brilliant. Thanks. I just love watching people with skill.
Brilliant video! Thanks!
I'm wearing mine right now! Restored it myself, the first watch I've done a full restore on. If even a complete novice like me can restore a rusted hunk, I don't know what's wrong with those Seiko approved guys. Great work on this Mike!
I’d like to hear that John showed this video to the authorized SEIKO service center, and got a full refund. Wouldn’t that be nice?
WOW! I HAD A SERVICE EXPERT DO MY TURTLE AND HE SCREWED IT UP! I should ship it to you. One watched video and I TRUST you 100%. Excellent service. Mad skills! Well done!
This watch had so much oil, the USA considered invading it.
I've been watching you for years now and all your experience is evident. Your work is quite professional.
Seiko: Back off, quick squirt of WD40, back on, charge the customer a mint. Job done! Unbelievable!
Don’t laugh. I had a Russian guy walk into my store with his watch that he oiled by pouring some type of oil into it. The dial looked like a bubble level. I was floored.
I took my bell-matic to Seiko for repair. They returned saying it couldn't be fixed.
Took it to a retired Seiko service centre watchmaker... & He fixed it!!!!
This comment tells you all you need to know. There are some neysayers in the comments doubting the story of this watch or the authenticty of the service centre. Comments like yours and other stories I know first hand just backup my theory on these authorised places.
I have one of these beauties from 1977 and I'm the original owner and yes it's still running perfect It has obviously been serviced numerous times . I love this watch❤
I have watched a Zillion clips on utube ... your clip kept coming up and I didn't click on it till today ...
"Oh My God"
I could never have predicted how engrossed I was with how you dealt with the initial issue ... and Bloody Fixed 🎉 ... Wow you said your not a Professional Watch Fixer ... however, you're more than that by a HUGE margin ... your attention to detail is outstanding and extremely rare in this day and age ... for most repairs now days "oh that will do" you pay good money for 3rd rate performance ...
I'm sure the recipient when he got his watch back was over the moon ...
"SIMPLY VERY WELL DONE"
👍😎👍
What a wonderfully genuine person you are! Love watching these vids.
To increase listening pleasure:
It's*number of times, *number of people etc not "amounts"
1,2,3, 10 times... that's a number.
An amount would be 5 kilograms or 7.5 litres of times, 753 kilograms of people.
If you count it, not measure it, then say "number of..."
Watching you put the watch back together I could appreciate your knowledge CHEERS
Thank you for exposing the laziness and incompetence of these scam services
Brilliant video Mike! My wife is out of town and I could be watching anything on a Friday night and I am watching you restore this man's sentimental beauty! You're amazing!
I feel honoured! Especially given you could have watched anything!!
Mike, I’d always trust you with any of my Seiko’s. You’re very modest and are brilliant at what you do.
I appreciate that!
WOW! I'm feeling quite humbled in so far as how difficult it must be to design, manufacture, and service such a delicate instrument.
I'm no watchmaker but still find rebuild videos fascinating, enough to find it astounding that this amateurish mess was ever returned from Seiko. I saw a watch someone had soaked in oil, and it was only little worse than this. What, did the service center turn the new guy loose without checking his work, or is someone getting drunk on the job? Whatever the explanation, Seiko owes somebody.$300 and an apology.
Very well done. I had a 1977 sent to Seko several years ago. Was told that I could not get service not from Seko but their agent who was told. I lost it during a cross country move. Left the box a took the watch. I went to work for a company that wouldn’t allow you to wear a watch as a salesman because if you checked the time your customer might feel like you were rushing them. A good job but a dumb policy. I got the watch because my first sales job encourage us to buy a good watch. I wore that watch 1977-1981 everyday. Then had to stop and never wore one again until Apple Watch and a new job.
I don’t even own a watch and I find this fascinating. Fantastic work with the repair and video documentation.
@@Wargasm54 thank you
WOW...WOW...WOW ❤ IT... WAS SUCH A PLEASURE watchin' you work on this beauty !!
Thank you for the patience to show us, in such clarity, though so difficult for you... Much love and the best of wishes to you Sir...from India 🙏🏼
Also a big thank you on showing service and oiling pivots with metal bushings. Think you're the 1st to show. My mom sent me a drawer full of watches; 3 of which are my grandfather's 7J and 1Js. As a follow on Q, many of the quartz watches she sent have no pivot jewels. Do you oil the plastic bushings too?
I remember like yesterday, I managed to find your channel while searching for restoring brushed finishes on cases and bracelets. You were showing a scratch pad (a finishing pad) I was amazed like it was very simple. Today you are competing with professional services actually finding their faults. A lot happened since that day and it is always a pleasure to watch another video of yours Mike. Have a wonderful weekend ahead.
Thank you for being around so long!
I am pleased with my progress but still have a long way to go
I have a Seiko Arnie which I've had since new. It looks very similar to the Turtle. Its now not my daily use watch. However, it is just sitting in my drawer. The only work its every had done is new batteries and replacement o rings. I used it full time when younger and did all my scuba diving with it on.
This watch is almost a chronograph. Sitting in my drawer for two years it was just 5 seconds slow.
I have just found your videos and am in awe of your skill and patience.
Thank you.
I also have an early 80s Turtle (possibly an 81) that was my Dad's daily. It is in almost identical condition as John's, and runs either fast, or slow, by an hour or more per day. I've adjusted it a few times with a phone app and it'll be fine for a week or so, then it becomes possessed again. It clearly needs service, but I have been reluctant to call Seiko for the exact reasons John experienced. It is an heirloom and I don't want to risk it with just anyone.
You clearly know how to work with these movements, and I'd love to send mine across the pond to you.
I enjoyed this video and learned a lot about this watch. Thanks for posting this!
Super video, well done! very impressed that ypu included the 4 attempts to get the balance jewel back together, would have been so easy to edit it to do it first time! Chapeau!!
Thank you!
Mike, thanks for being you and sharing your passion for horology with us! Another stellar job!
My pleasure!
Very amusing comments during the inspection and perfect music for the cleaning cycle this time. Love your channel!
Thank you!
After watching this, my thoughts are: "I will probably not be able to do this." There are so many small parts that I would probably forget which go where. I'm an electronics technician and I used to repair TVs, stereos, and similar stuff. After a job, I'd close up the thing and then be left wondering why there's an extra screw on the bench. I'd have to go back and take the thing apart to find where the extra screw goes into. Kudos to your abilities, man. Fantastic stuff.
I used to work at a shop repairing laptops and the extra screw disease went away eventually. Maybe once in a while forgot to install something but not often enough to matter. Sometimes i have to take notes or put in markings when i remove parts, usually i subdivided work in phases and every phase gets its own little compartment for small parts. I have done a handful digicams as well and those are kind of spicy, very layered.
I want to try my hand at a very cheap mechanical watch someday and see if i totally mess it up or whether i can put it together again. Totally expect to be very very confused for a while there. But no point selling youself short, right.
Great video as usual, the evidence that it is not always better to bring the watch to the "official" dealer, an independent watchmaker is - in your case - more proficient and less expensive too! Great job and big heart. Thank you for sharing your videos! I own about 12 japanese watches ranging from orient to seiko ones and I've always be pleased with the reliability of these watches, always bring them to a local watchmaker here in Italy. I cannot verify his job, but the watches comes back more accurate and shiny all the times (There is no Seiko dealer here, there is a bigger one at 200km from my home which is too far away. I prefer to bring and get back my watches by hand after servicing/repair).
Watching you strip this watch was truly amazing and educational. How on earth do you remember where every part goes back together? Glad I watched your video. 😊
You get used to it but this 6309 movement, without exaggeration I have probably serviced 30+ of them. Thanks for watching.
I love the 6309 look, but because of the rotation it had to be wound each time I wore it. I had a watch maker make it a hybrid 6309-7548. I kept the face from the 7548 and back, and had it relumed with antique color. Now I wear it constantly, more than my father's pogue, and sea dweller.
Battery only needs changed once every five years. And we are talking an '85 movement in a '79 body!
Hello from the Netherlands, my name is Jan. It is for me very interesting to see how and with patience you restorate these watches . And also surprised how much information you give us. Myself, I have two Seiko Watches . One the 5 serie and one wonderful in blue. Always running for more than forty years. I wish you much succes in your repairs.
Greetings Jan 🌷🌷🌷Netherland
Thanks and welcome
What a fantastic video. Brilliant workmanship. New tech as well as old skills.
Many thanks!
Well, I hope he brings your post to them and gets his money back. Well done again on fixing it. Most times the real value of a watch is in the history of it. Not the money it is worth
You are the 2nd watch resto channel I’ve subbed to and I find your affable demeanor and presentation most engaging. Thank you for taking all the time and effort to create quality content for both enthusiasts and laypeople alike. Keep up the good work mate!
Welcome aboard and thank you for the comment. Feedback like yours keeps me going!
what a great job you did , i have a seiko like that one, still running well, I just really enjoyed watching you video, it was so relaxing and entertaining, I appreciate your patience and calmness , working at this scale is not an easy trick. thanks you for the vid.
You did a solid for the owner but more importantly you did a great job with careful hands. Hope the owner shars with the that hacked it. Thanks for careing.
Nice work! I have the same watch. Still running. Will keep you in mind for repairs
I have the same story my dad was a diver and this was a anniversary gift from my mom to dad. Dad's passed on and I would love to have mine serviced. I remember a small round depth meter on the strap as a kid,...I wish I still had it but it's gone.
I’m stating the obvious- you’re an expert in your field- amazing videos- thanks
Tremendous save of a memory-laden family treasure, Mike! I always enjoy your videos, but this was really special. Whatever "professional" credits you may lack (I don't see it), you make up for them by being a very good man. Kudos and best wishes from the Sonoran Desert of Arizona! 👏👏 ❤
BRILLIANT WORK
Hi Michael, my first time on your page. I really enjoyed watching you repair this watch, fascinating. With my very amateur kit I can change batteries and seals but that's about it. The scope you have for regulating the watch is genius. Looking forward to seeing more of you work, it's an absolute pleasure to watch you, pardon the pun.
Hello Mike. Tha same hapends to me with a Seiko Jumbo in Seiko Argentina. The same speach "It's an old movement and we can't service it better". They charged me U$S 250 and it's runninger worst than before: Sh.. on Seiko Services. Superb job and greetings from Argentina. Thanks for the video
Nice repair Mike. The amount of oil was surprising! And good spot on the dried oil on the balance jewel.
Well done Mike, you did the right thing for John because you are a really good person.
Perfect. I find dismantling and reassembling a watch movement so relaxing.
You did a solid for the ower and treated him right with you r[rofesional work. I hope he shares this with the prior
It's always Brilliant the difference Professional and a service centre Board Changer
You are professional in every respect! Thanks for the video and the education!!
One pleasant hour ,better than any movie .Thank you !
I really don't understand how they can call themselves proffessionals when they do such a bad job, they should be ashamed of themselves. Its good that hobbyists like you Mike can straighten out their work. Good job!!
Thank you. I have principles so when Jon told me the story I knew I could help.
Mike, this was great detail and very insightful; thank you very much. I am just getting a level deeper into collecting and aspire to restore and build as a hobby. As a former EE, I appreciate your detailed and methodical approach. Cheers!
I enjoyed the video and gave it a sub and alike. I went back and re-watched the reassembly of the barrel and I'm still unsure, did you put the original main spring back in?
I am so sick of incompetent and/or dishonest people in all sorts of service from watches to cars to home repairs. Kudos to you for making it right and even more so for not charging him.
Years ago I had an analog face quartz watch that I wore at work. Being a police officer working rotating shifts I needed a watch I could see during the day and at night so I had one with tritium hands and markers. One day, the watch stopped while was working. Ordinarily, I would open the case and replace the battery myself. But, there was a jewelry store in my area and I wasn't busy so I stopped in to get the battery replaced. The gentleman took my watch in the back, returned a few minutes later, and said he replaced the battery but the watch was broken and wouldn't run. He charged me for the battery and I left.
That night I opened the watch up and looking at it under a magnifying glass found that the watch had a coil of fine wire going to a mini circuit board. The wire on one end was broken. There was a scratch going from the area of the battery to the broken wire. I couldn't prove it, but it sure looked to me like he slipped with some tool while replacing the battery and broke the wire.
Another excellent video Mike! So glad to see you could save this one! Sadly, this time of watch work is ramped here in the US. Very hard to find a reputable watchmaker. Looking forward to the next one!!
What a task you had on your hands but you did it. Well done.😊
Before I started to get a little more serious about servicing watches and educating myself I’d swish a movement that wasn’t working or working well in solvent snd then add a must of WD40 over the entire movement and wala! It would occasionally come back to life. I’d imagine many of the watches I then put up for sale looked similar to this one. I apologize for my past behavior! I’ve since gained a bit of knowledge and and greatly enjoying a new hobby and skill set. I want to thank content makes like Mike for my ongoing education!!