POV Camera Vibration Isolator - RCTESTFLIGHT -
HTML-код
- Опубликовано: 2 май 2014
- Get them here: www.stratus-productions.com/po...
Isolators for larger cameras: • Wire Rope Vibration Is...
And even larger cameras: www.stratus-productions.com/ci... - Наука
The results you're getting now with the gimbal and your vibration isolator are truly amazing!
You got a subscription out of this and the video about the smaller (original?) dampers - I appreciate the time and efforts that went into all the test and video creation. Thanks!
Works great . I hung the brushless gimbal with its vibration isolation system so as to have two and it has no jello .
Thanks
David
you have changed everything !!
Have had problems with jello on my gimbal, always watch your videos, this is very cool! Just bought one from you!
That's awesome man !! Love it
That looks even better than your first one!
Just ordered one, it looks awesome in the video! :D
Gustav Solin do you still have yours. Can I buy it off you
Nice video. Question for you. Do you ever fly with 1.3 video?
Great job man
Would you suggest the vibration isolator for reducing the shake caused by walking while holding the gopro with... say a monopod or diy cage?
Hi, what would you recommenced for wire length and thickness for the full 10 ounces. I have a gopro here 4 black and z1 tiny 2 they add to a combinded wight of 10 ounces. Sadly for my old set up i removed some of the outer wires to make it softer but i think i might have over done it. Please help with your thoughts. Thanks
Do the wire isolators need to hang from the bottom or could you mount them on top of your drone? Or would that not work because of gravity?
Tested mine tonight for the first time. Looks great, no Jello at all. Thanks, I'll order more now.
I just recieved my team rebel design beholder lite brushless gimbal and the pid settings were far from acceptable. Can you make a video of how you get your pid settings to be so perfect? Thanks for the great products and videos
Do you have a link to order one. Would love to give it a try on my Powered paraglider cage
hi daniel, would it work best if i used this on my 2axis gimbal with the vibration rubber, i would like to keep the vibration rubber in the gimbal is that okay?
amazing , how would i get this to attach on my h3-3d p2 mount ?
"An out of balance motor".... I like how you just used an NTM :P
Great product, the footage at the end is super smooth.
with a zip tie...
The shaft was bent. He obviously trusts NCTM as he uses them for most of his builds
Might try this on my 350 QX not sure if it will fit might hang to low?? Any thoughts
Do you have plans for the POV ISO ? I would like build my own version because the is too expensive for shipping to Germany.
+Stereodreieck RC Hi Stereodreieck, ich habe das selbe Problem und werde bald eine Version in Deutschland CNC fertigen.
+lowcee89 Hast du es schon fertigen lassen ? Wenn nicht +1 falls möglich ;)!
Jiggi Meine Version ist fertig und hat auch Zenmuse Mounts sowie Gimbal Haken und 45x45x3 Bohrungen, ich lasse bald aber bestimmt eine v2 machen, gerne +1 wenn du willst
@rctestflight >>> 👍👍
would love to try but it looks like you no longer make them?
Great Vid! Anything similar for handheld DSLRs? if that exists :)
odd question, but if 2 of the wires are longer than the other 2 how does it impact it?
How well do you think it will work upside with the camera on top? I've just ordered one so I can tell you how. Nice video, nice product.
I just saw the answer to that question further down. Didn't think someone else would want to know since it appears that the convention is to hang cameras.
Order one Monday let me know when it's shipped. Why the popsicle sticks?
I received the two in my 2nd order.. It gave me an idea. Instead of using sticks to stiffen the CF plates I joined them together (total of 4 plates, 2 at top and 2 at bottom mated together by the screws that hold the wire.)
This makes it much stiffer and neater. Have you considered going to 2 mm CF for these?
Good idea. Yes, the next batch will 2mm carbon
That's great.. I'll grab more then for sue.
How can I install a PAN-TILT in the vibrator isolator??
Regards
cool
Why is one of the last links bringing me back to the same video?
Which gimbal do you like best? T-2D, DYS or the Hummer? I'm not sure which is the best to buy. Or maybe you could do a comparison of these three?
The hummer and DYS are both good. T2d takes some work
that is impressive
Nice!
Interesting design, but I can't help but wonder if the top plate could be eliminated and the cables mounted directly to the multicopter, saving weight. Just a thought.
Sure, you'll just need to drill the hole pattern into the bottom plate of the aircraft
How did you cut the carbon fiber? Great job.
CNC
awesome
Where do you get carbon?
Is it possible to put a Gopro on top of this mount, instead of hanging from below?
Yes, this will likely even work better than hanging the camera
Like what is the length of 1 wire
Can anyone pls tell me how long the steel wires are?
Where can I buy this?
jorge pablo i'm wondering the same question.. have you found out yet?
what the Price for this?
Nice video but when a flight compilation
I made one out of zip ties, it works great.
What is meaning of POV? Point Of View? Persistant Of View?
Point de vue ;)
VAL0PRODUCTION
Merci :)
I need one
genius
I need to get a tetanus shot after looking at the quadcopter
1:34
нет такой вибрации на коптере. Ну только если моторы очень китайские и руки очень кривые.
I don;t belive stablilization videos becaouse they can be helped by stablilization program more then the thing.
Fat fingers