S07E06 - Shimano Nexus - Broken shifter
HTML-код
- Опубликовано: 9 окт 2016
- Visit bikebook.si
Hello everyone. Today we are going to replace a broken shifter on Shimano Nexus 7 speed internal geared hub.
Lets start by removing the old broken shifter and cable.
Lube the end of the outer gear casing and place the protective end cap over it. This repels water.
Route the cable through the outer.
Turn the adjustment knob all the way in. Then turn it two turns back.
Set your shifter in fourth gear. Check the manual for specific instructions.
Pass the inner cable through the fixing bolt.
Use the allen key to turn the pulley into position for hooking the cable to it.
There are two yellow setting lines on the hub that you should closely line up when placing the fixing bolt on the cable. This is a bit of trial and error. Use the adjustment knob for fine adjustment. Don’t forget that you should be in fourth gear on the shifter.
When all done, cut the cable and squeeze on the protective cap.
You should watch our previous movie to find out why we use hair spray on rubber grips. Have a nice day and don’t forget to subscribe. Авто/Мото
Thanks, man. I was installing a new Nexus shifter on a bike I'm constructing. This helped me out a lot :)
Thanks, I was replacing a cable in a Shimano Nexus 7 on my bike. Your video was very helpful
Recommend this video! Excellent description👍👏
Thank you. Really helpful for me. Paul . Sheffield.
1:50 "...this is a bit of trial & error"..... not at all!The distance of the cable between the locking bolt center and the end of the cable guide should be 10cm.
Is this the same for the 8 speed and the 7 speed?
BIG AF if true
Thank you. Very informative
Thanks, forgot about the 4:th gear thing.
Got my bike semi ready :)
Need pedals and some rim truing and it´s good to go.
Very helpful, thank you!
P.S. I didn't appear to have a hole in which to place the hex key to turn it, perhaps mine's an older model (8 year old DH7 Vitesse), that or it's full of dirt and invisible🙂
Missing parts of the disassemble in this movie, it sucks, you don't know we're the screws are mounted, the shifter is stuck and in this movie he pulls it right of the steering without disassemble.
Exactly, he left out the most important part
Denk wel dat helemaal goed 👍
Do you think thumb shifter will work as a replacement for the revo shifter?
👍👍👍👍👍
Just replacing it is simple. Without a guide of the disassemblement of a shifter its useless.
That’s what i need too. No documentation from Shimano and no video i can find for THIS shifter
what is the name of the pliers with clamping function???
Thank you!!!!!!
Wow
Cool
Thank you for showing a noob how to remove the hand grip first I guess if I can copy you I should already know how to remove grip and see how to remove the grip
good work
Çok temiz anlatım
so gehts - besser kan man ein Tutorial nicht machen. Weiter so.
Why 7 speed doesn't lock on?
Dear friends,
today I bought a bike with this system (Shimano Nexus 7 Speed), but forgot to ask the seller if gears are to be shifted while pedalling or do I have to stop pedalling between each shift. Could you please tell me what is the correct way?
Thanks in advance!
You have to stop pedalling...this thing a millisecond... No worries!
@@adamberec4121 You don't , you can continue pedalling
@@larryjey3620 Between gear changing,you need to stop pedalling on Shimano inter hubs
Nuvinci,Rohloff,Pinion is different,you can change the gears under the pressure
Spero pupi aiutarmi quando ho in problema al cambio mi scattano da sole le marce credi dovrei solo tirare un po fil
replacing is a bit of tral an eror jaja
What happened to measuring the cable ?!? Useless video
This video needs to be removed as it’s completely wrong about everything… the problem is that’s it’s the first video that comes up when doing this search .. do the biking world a favor and delete this utter nonsense
Maybe it would be helpful if you pointed out the errors you see?
just stop watching after this accent horrible
No trouble understanding him.