Such a helpful how to video.went to the website for programming our new remote and the how they worded it and not specific at all how to program the new keyless remote … didn’t get far at all with it. Came across this how to video and wa la! The remote was programmed on first try! Thanks for posting this on your channel :)
Great instructions. The important thing is if you have the remote with the panic button these are correct instructions. I had the instructions for without the panic button. These instructions worked for me in one move. Done in about 4 minutes.
I have the remote control with three buttons unlock, lock and the one for my rear window. If you had this too, do you have the instructions for me please
Thanks, works great. This video is the only thing that I successfully used for instructions on how to program a new key fob on my 2003 Jeep Liberty! All other attempts from other sources before seeing this video failed!
laughing spam fritter Great ! Thanks for sharing. Now others will have that info when they are searching. Glad it all went well. Thanks for dropping by. -John
Thank you for the video when I try to do the instructions on remotes remotes.com I just cannot get it to work but your instructions got the fob to work and I do appreciate it
Will this work on a 2007 Jeep liberty? most programming instruction say you need two working key fobs. The key and the fob unit is one piece. I purchase two new fobs on ebay for 23.00 a piece don't want to have to pay for programming
There is a much easier, simpler and faster way to program your fob and you don't even need a working fob to do it. 1) With the engine off sit in the drivers seat and open the door. 2) Push and hold the lock switch on the door in the up, unlock position. 3) Put the key in the ignition and switch it to the on position without starting the car. 4)Still holding the door lock switch on the door up, press and hold the door unlock button on the fob for five seconds. 5) Let both the fob button and the door switch go and turn the key off. You are done and the new fob will work in all functions. Time; less than one minute.
Nope...Sorry, but you need the original key fob to enter the programming mode. Your choices are go to the dealer or try a lock smith. some are able to do this.
No these are for Jeep products only. and NOT all jeeps. Be sure to contact the seller if you are not sure. Normally if your remote looks like this it will work, but that is not a rule of thumb.
+keepithookin 21 you will need to go to a dealer to have it matched up. You need one working remote to access the set mode on your vehicle. With out it you can't get into the programming area to add a remote.
Such a helpful how to video.went to the website for programming our new remote and the how they worded it and not specific at all how to program the new keyless remote … didn’t get far at all with it. Came across this how to video and wa la! The remote was programmed on first try! Thanks for posting this on your channel :)
Great instructions. The important thing is if you have the remote with the panic button these are correct instructions. I had the instructions for without the panic button. These instructions worked for me in one move. Done in about 4 minutes.
I have the remote control with three buttons unlock, lock and the one for my rear window. If you had this too, do you have the instructions for me please
@@stijffffff I got the instructions from the seller website. I don't have the jeep anymore it died. Very sad
@@cybdiver too bad but thanks anyway
Thanks, works great. This video is the only thing that I successfully used for instructions on how to program a new key fob on my 2003 Jeep Liberty! All other attempts from other sources before seeing this video failed!
Your instructions were a dream to follow, it worked on the first try! The instructions that came with mine were useless.
Did this method on my 2003 Jeep Liberty and it worked a treat. Thanks
laughing spam fritter Great ! Thanks for sharing. Now others will have that info when they are searching. Glad it all went well. Thanks for dropping by. -John
I replaced the batteries in my remote now it doesn't work at all . How do I reset it?
Thank you for the video when I try to do the instructions on remotes remotes.com I just cannot get it to work but your instructions got the fob to work and I do appreciate it
You made it sooo easy thank you now I have 2 working
Any idea how to do it with Jeep Liberty fob that has no panic button?
And what if I do not have the old one?
The directions that came with my remote were missing some steps. Thanks man.
I found the instructions on the website of the people that sold it to me. Have tried them?
It worked, thanks.
This worked beautifully Thank you thank you!!
Perfect.
Thank you it worked perfectly.
Well after I put batteries in the new one lol
Will this work on a 2007 Jeep liberty? most programming instruction say you need two working key fobs. The key and the fob unit is one piece. I purchase two new fobs on ebay for 23.00 a piece don't want to have to pay for programming
I have a jeep liberty too and mine has no panic button
Perfect! Thank you!
There is a much easier, simpler and faster way to program your fob and you don't even need a working fob to do it.
1) With the engine off sit in the drivers seat and open the door.
2) Push and hold the lock switch on the door in the up, unlock position.
3) Put the key in the ignition and switch it to the on position without starting the car.
4)Still holding the door lock switch on the door up, press and hold the door unlock button on the fob for five seconds.
5) Let both the fob button and the door switch go and turn the key off.
You are done and the new fob will work in all functions.
Time; less than one minute.
Tried 20 times does not work Jeep Liberty .
Does not work I don't hear the chime sound 3 second after why. I have a working key fob but can't program new one. 2002 Jeep Liberty
This video is the useless if my old fob is broken, which is why I need this new one
Not true. I lost both of my pods. And got a new one. And it programmed right away . But thanks for sharing
What about if u dont have an Old remote
How would I do it when I don't have panic -button in my remote?
Too confusing .
You dont say what remote to start with and you switched., you what after you already push a button.
Try start on ne then to old
can i program a old remote (salvage ) or does it need to be a new one
Thannnkikkk youuuuuu
I have only the key not the remote
Am still be able to program a remote ?
Nope...Sorry, but you need the original key fob to enter the programming mode. Your choices are go to the dealer or try a lock smith. some are able to do this.
My remote is OK enters programming mode but new one won't set up????
Is this a Jeep Liberty? Did you try the link in the description?
Are these remotes universal ? I mean can I use it on a Neon, Ram, Jeep etc, ?
No these are for Jeep products only. and NOT all jeeps. Be sure to contact the seller if you are not sure. Normally if your remote looks like this it will work, but that is not a rule of thumb.
What happens if I don't have at least one key fob?
+keepithookin 21 you will need to go to a dealer to have it matched up. You need one working remote to access the set mode on your vehicle. With out it you can't get into the programming area to add a remote.
Big Guy Review 😨😰😰
Will it work on a 2002 Jeep liberty?
that is what i used mine on.
hi will this work for a grand Cherokee 2004
no sorry it will not. try here for more info. blog.keylessentryremotefob.com/2013/03/2004-jeep-grand-cherokee-key-fob-remote.html
ok thank's ,for getting back at me.
Didn’t work don’t have old remotes
that's not how you spell installation lol, Good work none the less :D
i fixed it thanks
Fuck what about if I lost the original one 😱