Mikey Rolls... the ol saying goes.. 'Build it and they will come' & if it dont start.. they will simply come back for it fear not.. 'Roll On next ep' - loving the epic build thus far..!!
Love watching your videos and love the Fabrication work and the welding I was a welder fabricator for 19 years I can no longer do that kinda work do to my health I was Diagnosed with parkinson's disease so Its hard to that line of work but love your videos makes me miss that kinda work look forward for your videos
Sorry to hear that Ricky! It definitely hard not being able to do what you love. We really appreciate the support and hope that we can give you a sense of nostalgia when you watch every week!
@@SalvagetoSavage thank you much appreciated i do miss that line of work Diagnosed at 41 years old now going on 45 and cant work sucks...BUT anyways sorry for the poor me story i can't wait for future videos again thank you 🙏
Thanks Mike, Andrew, Tim, very happy to hear it almost fire up! Good catch on the valve covers Andrew! I’d pull the push rods and inspect for damage, easier now then later!
Mikey Love this vid .... DO NOT CHANGE A THING , lol with the way you boys do your videos , there fast complete and I love when you speed up up some of the work but not all of it. Big Love your friend Bill R.
You guys make stuff look easy to do... when i work on my car whenever i say its just a 2 hrs job i end up with 6 hrs with something else either broken or missing heheheheh
Hecks yeah man let's goooooooooo ......thanks guys good day myself working on my 388 cu in. 79 monza and my 96 gmc jimmy 2dr 4x4 L31 v8 swap with lt4 cam and roller rockers 373 gears ⚙ 😳 love hot rodding man let's keep the sport alive and the culture going love it wrench till I fall over dead lmao 🤣 😀 😄 😜 😆 👏 🤣 😀 😄 .
Another awesome build. Curious if there is ever going to be a LT swap into anything you guys do? I know the LS platform is amazing and has a ton of potential, but seeing the new GM motor in something would be awesome too. Keep up the work, the videos are getting better and better.
We're not opposed to doing an LT. It's just all about availability and cost! Our engine builder had this one sitting on his showroom floor so we were able to snag it up! Thanks for watching and all of the support!
I’ve actually never heard of them up until 2 weeks ago, there was 0 inspections on this. It was simple, we needed a quick project to swap an LS into for LS fest, saw it, bought it and so began the travelall. I have yet to even see a picture of theirs but I heard it was similar.
Man I dig the shit out of this build. I am a little disappointed I figured you would've put some of those twin mirror image mufflers on here with some fender out exhaust. Still cool without the twin turbos.
Do you have some part numbers for those brake line parts and pieces. That’s what I’ll be working on next, plumbing. Never built a system from a scratch and wanna make it nice and clean. Planned to go to ls fest but work calls. Maybe next year and I can actually drive my build. Thanks.
Man the fittings, parts and design of the over all system are very specific to the project. I can tell you the hardlines we use are 5/16 I get off Amazon, their gold (I love gold) we basically use it on every project. Wilwood can help you sort out the fittings
Speaking of Holley, have them send you the kit to relocate the coil packs so they don’t stick out like a sore thumb on those valve covers! Hey, for the average Joe, that’s only $500 worth of “stuff” for a simple job. For all of the tapping you guys do, and the zillions of dollars going into that shop, buy some ratcheting tap handles.
We'll try to do a rundown at the very end with all the big pieces that went into the build! But all the guys at Sikky and Holley are super helpful if you ever need to find something specific for your build!
I know it saves time, but I hate that you guys run fuel hose for such long distances. If it was my car, I would insist on metal tubing for the run along the frame with only short hoses on each end to connect to the motor and fuel tank. The rest of your work is absolutely amazing
It would take us as long to get the new gasket as it would a new cover. We'd rather use a cover with the correct height and save this cover for a different build
You Guys are Bad Ass. You want to do my BRZ. Wide Body, Wheels, tires. Whatever you want to do. 2015 BRZ limited. Pearl white. Mint condition and all stock.
Love the work and the videos but I about died when I saw the brake line flare tool you are using! Are you really using the same POS I have thrown across the garage multiple time because it is such a POS?!?! Come on guys! there are WAY better options out there! Somebody please reply with recommendations! I need to upgrade myself because I won't use that thing again.
@@SalvagetoSavage Haha! Love you guys! It works in a bind and is a staple for us commonfolk but you know there are better options! Mikey! Take care of your guys!
Just want to let you guys know that imo the vehicles you build here are some of the best looking builds I’ve seen. Keep doing what you guys are doing.
Thank you so much! We really appreciate all the support. Thank you for watching!
I agree with you Frank...
Yea the level and quality of fabrication on the fly is insane
Mikey Rolls... the ol saying goes.. 'Build it and they will come' & if it dont start.. they will simply come back for it fear not.. 'Roll On next ep' - loving the epic build thus far..!!
Thanks so much for the support!
Love watching your videos and love the Fabrication work and the welding I was a welder fabricator for 19 years I can no longer do that kinda work do to my health I was Diagnosed with parkinson's disease so Its hard to that line of work but love your videos makes me miss that kinda work look forward for your videos
Sorry to hear that Ricky! It definitely hard not being able to do what you love. We really appreciate the support and hope that we can give you a sense of nostalgia when you watch every week!
@@SalvagetoSavage thank you much appreciated i do miss that line of work Diagnosed at 41 years old now going on 45 and cant work sucks...BUT anyways sorry for the poor me story i can't wait for future videos again thank you 🙏
You guys are always building some insane vehicles. Such a talented, skilled crew 💪🏻💪🏻
Thank you 🙌
Kalel is he the new Superman for the shop 💪🏽🔥🔥🔥
We miss him every day he doesn't show up to the shop!
the best youtube channel there is. a 6.0 swap with a T6060 in 1 episode wow!
Thanks so much!!!
You really made my day with Another great episode. Thanks for sharing and good luck with the final start update
Thanks for watching! We have another update coming up tomorrow!
I love that teal color on the motor; not only does it match the Travel-all, but it matches one of my guitars!
Yah man, I was hesitant at first but love the mix of the silver, black and teal
Really great editing and production on these video btw :)
Thanks so much!
I think this is one of your most technical classic build, 👍🏾👍🏾 can’t wait till you get to the upgraded brake system.
Love the content, y’all need a show on MotorTrend!! I’ve said it for a while, the best shop and best builds out there. Keeping it real in Florida!
Thank you so much Thom!!
That color on the LS is sick can’t wait to see the burnout.
That teal definitely has some vintage vibes!
Absolutely love watching the details come together on theses builds! Great content guys!
Thx Bobby, we really appreciate you watching and the compliments
Thanks Mike, Andrew, Tim, very happy to hear it almost fire up! Good catch on the valve covers Andrew!
I’d pull the push rods and inspect for damage, easier now then later!
Definitely! We should have an update on it for you guys shortly too!
This build is coming along and is quick. You guys are masters at your craft🤙🤙🤙
Man super quick, we’ve been really hammering down in it. 7 days a week, up to 50 hrs a day between 5 guys
Dudes!! Finish the orange Chevelle first damn dying to see it done. 🙂
It is looking bloody brilliant Men, it going to be a freaking beautiful Van 👍🏼👍🏼🇦🇺🇦🇺🦘🦘Cheers from Melbourne Australia
Thanks so much for the support!
THANK YOU SO MUCH!!!! I LOVE EVERYTHING!!!! GREAT VIDEO AND EDUCATION. THANKS FOR SHARING!!!!! HIGH-QUALITY PARTS AND BUILD!!!!
Our pleasure!
hey, thank you for showing us all the real workshop action, plain and unsweetened (to a point I suppose), come rain or shine...
That’s a beautiful engine, it should be on display while in the truck.
nice job guys 💯, handcraft construction my great passion, thanks for the video ..... I'd be happy to work there with you 👍💪
Thanks for watching! Send us your resume. We're always looking for new talent!
I like when people are real and don't hide the issues we get, we're all Human no matter how professional you're are,
We try to keep it as honest as possible with you guys!
Looks well built
It's just lovely work!
thanks!
great video. Very impressed by your shop and team. Just intense.
Thank you very much!!!
Fancy Andrew got game! = Nice work / Thanks for sharing your skill 🍺🍺
Thanks for watching!!
Street is Neat, but Farm’s a Charm! Harvesters rule!
Hell yeah!!
Looks great! Gave me an idea for my build .
Heck yah Paul, whatcha building
Mikey Love this vid .... DO NOT CHANGE A THING , lol with the way you boys do your videos , there fast complete and I love when you speed up up some of the work but not all of it. Big Love your friend Bill R.
Thanks so much Bill! Keep tuning in and we'll keep cranking the videos out!
Awesome job again guys, truck is looking incredible.
Thank you!!
Always enjoy watching you guys fab up stuff. Awesome job 👍👍👍👍👍
Glad you enjoyed it!!
Nice work guys. Just love the outcome 👌
The International Travelballer!!!
Can't wait to see this thing ripping awesome work as always guys
You and me both! Thank you!
Well I'll be damned, That @Sikky Corvette front drive set up might just get me some A/CEEEEE in my '68 Coupe !
Hey big Gene, loved the way that sikky front drive kit fit! It was perfect
LS lookin like its gonna be a spicy unit! Let's get it!
We're already itchin to do some burnouts!
You guys make stuff look easy to do... when i work on my car whenever i say its just a 2 hrs job i end up with 6 hrs with something else either broken or missing heheheheh
That's us too! lol We just push the sheared off bolts out of the frame before we start shooting! lol
Damn! Sounds tough!! Sucks about the valve cover but im sure u legends will get it sorted. Looking forward to the next video. ✌️
At least it didn't run long enough to mess anything up! We're still on track for LS fest!!
@@SalvagetoSavage wish i could go check this thing out in person!
Les gooo
So close to smoking the tires!!
Hot that like button right away cause it’s always fire drops.
Thanks for all the support!
Sweet 23 window in the background.
Great job. Just getting in to your channel.
Welcome! Hope you enjoy it!
Lucky lucky lucky, covers causing problems i know you guys can fix, cant wait for the next drop hearing that engine come to life.
Stay safe.....
If we didn't notice it, it could have been a catastrophe!
@@SalvagetoSavage as my old boss use to say with engines
" its far better to hear them than smell them" when starting new or recon engines.
Great vid.............. 👍👍👍👍
Thanks!
@@SalvagetoSavage 👍👍
Hecks yeah man let's goooooooooo ......thanks guys good day myself working on my 388 cu in. 79 monza and my 96 gmc jimmy 2dr 4x4 L31 v8 swap with lt4 cam and roller rockers 373 gears ⚙ 😳 love hot rodding man let's keep the sport alive and the culture going love it wrench till I fall over dead lmao 🤣 😀 😄 😜 😆 👏 🤣 😀 😄 .
Love to hear it man!!!
I’d say tie the passenger side valve cover port to the throttle body port! That way you have negative pressure in the crank case.
Another awesome build. Curious if there is ever going to be a LT swap into anything you guys do? I know the LS platform is amazing and has a ton of potential, but seeing the new GM motor in something would be awesome too. Keep up the work, the videos are getting better and better.
We're not opposed to doing an LT. It's just all about availability and cost! Our engine builder had this one sitting on his showroom floor so we were able to snag it up! Thanks for watching and all of the support!
More power than an 80s formula car suspended on camping mattress.
Good stuff
Glad you enjoyed!
Love the builds. Can I interject an opinion, perhaps start each vid with brief overview and/or updates on all other builds.
We'll try to keep you in the loop a bit more on the other projects! Thanks for the feedback!
You could have cut a thin aluminium spacer under the valve cover, but bigger covers are best I guess, just takes a little longer :)
Definitely an option! But we'd rather just save these covers and use em on an LS that doesn't have such big rockers!
"Let 'er rip, tater chip!"
Someone watched a certain RUclips channel from a Florida giraffe too much... 😂😁😜
Damn no idle I’m waiting for next vid
So close but so far away!
Make that fuel funnel neck upside down, to follow the floor and side wall. And then you can hide it easily
Awesome
Thanks!
Puddin inspired this build, 💯 .
I’ve actually never heard of them up until 2 weeks ago, there was 0 inspections on this. It was simple, we needed a quick project to swap an LS into for LS fest, saw it, bought it and so began the travelall. I have yet to even see a picture of theirs but I heard it was similar.
Looking good just about good as mine!! LOL!!
If you're at LS Fest in Kentucky we'll have to check yours out!
Man I dig the shit out of this build. I am a little disappointed I figured you would've put some of those twin mirror image mufflers on here with some fender out exhaust. Still cool without the twin turbos.
Do you have some part numbers for those brake line parts and pieces. That’s what I’ll be working on next, plumbing. Never built a system from a scratch and wanna make it nice and clean. Planned to go to ls fest but work calls. Maybe next year and I can actually drive my build. Thanks.
Man the fittings, parts and design of the over all system are very specific to the project. I can tell you the hardlines we use are 5/16 I get off Amazon, their gold (I love gold) we basically use it on every project. Wilwood can help you sort out the fittings
soo doope as always
Thx my man
F'n wicked man
Thanks!
👍😊
I need that van for a wheelchair ramp van
Or and old work an with a lower floor. I need about 56" from floor to roof but really need is insulated well and quite
Not sure if the ceiling would be high enough but it would definitely be cool for a handicapped accessible van!
Wish I was close I want to learn and build me something
We're in south Florida. Where are you at?
How did you guys learn metal fabrication? Were you self taught or did you go to some type of school/training for it?
It's a mix of both. Going to school definitely helps you with the fundamentals. But nothing will ever beat seat time and real world experience!
When you're done building my truck just let me know the final cost and I'll send you a check. 🙂
What are the upper an lower ball joints part number or where did you get them, what year is the spindle set up you put in the travelall
Speaking of Holley, have them send you the kit to relocate the coil packs so they don’t stick out like a sore thumb on those valve covers! Hey, for the average Joe, that’s only $500 worth of “stuff” for a simple job. For all of the tapping you guys do, and the zillions of dollars going into that shop, buy some ratcheting tap handles.
They are 2 piece valve covers so the coils would would be hidden
Why do you run soft lines to the rear callipers on a solid rear axle?
Why in the world would you do a power steering delete on what's going to be a big and heavy truck??
Is this your “ grocery getter”? Great looking International.
We wanted it to be! But unfortunately someone called dibs on it before we even started the project!
You guys don't fuck around hey 🤣
We try out best not to! lol
What compressors are you using?
They are viair compressors
Parts list and prices Please! It's going together quick!
We'll try to do a rundown at the very end with all the big pieces that went into the build! But all the guys at Sikky and Holley are super helpful if you ever need to find something specific for your build!
@@SalvagetoSavage Nice thanks guys!
#shorts
You guys need a Dr,cause all of these rides are ""SICK""
LOL! Thank you!!
Valve cover spaces will work, you guy can probably make in house…
It was easier to get the proper set of valve covers and hold onto the other ones for another LS project
Why are you deleting power steering on something that big?
Hi love videos. What year is your LS motor
What if you remove that plate inside the valve cover?
That plate stops the oil from surging out of the vent on the cover. We'd rather keep it in tact for a different build!
These are cool but what’s up with the orange chevelle
The orange chevelle doesn't have to be leaving to do burnouts in Kentucky in 2 weeks!
I know it saves time, but I hate that you guys run fuel hose for such long distances. If it was my car, I would insist on metal tubing for the run along the frame with only short hoses on each end to connect to the motor and fuel tank. The rest of your work is absolutely amazing
We use the same set up in a lot of our builds and haven't had any issue with it yet!
Metal rusts
Mikey you laulau and you f.o.s I think you all are awesome content but let's go 2x honolulu hawaii big thanks for shet.
We put a duramax in a travel all
Nice!
And the harness was a pain to stuff
Nice Video.
#STAYSAFE
#PHILLYPHILLY 🇺🇸
💪👊👋
I thought they make a "tall" gasket?
It would take us as long to get the new gasket as it would a new cover. We'd rather use a cover with the correct height and save this cover for a different build
pudins fab shop made the seam thing a few years back
same truck same engine
that's cool
Who is going to pay the tire bill for all of the exploded tires once you get that baby rolling?
It's a tax write-off... right? lol
Gotta ask any inspiration from puddins fab shop.
We hadn't heard of puddins until everyone started messaging us at the beginning of the project
@@SalvagetoSavage check his Edna build series out maybe some pointers with those old internationals
Holy S%#t valve covers no bueno
Whats up with Delorean?
We should be doing an update on it soon!
You Guys are Bad Ass. You want to do my BRZ. Wide Body, Wheels, tires. Whatever you want to do. 2015 BRZ limited. Pearl white. Mint condition and all stock.
Love the work and the videos but I about died when I saw the brake line flare tool you are using! Are you really using the same POS I have thrown across the garage multiple time because it is such a POS?!?! Come on guys! there are WAY better options out there! Somebody please reply with recommendations! I need to upgrade myself because I won't use that thing again.
Hey now, it gets the job done. I actually got that in a bind a few builds back and it hasn’t failed us yet. Or at least it hasn’t been throw. Lol
@@SalvagetoSavage Haha! Love you guys! It works in a bind and is a staple for us commonfolk but you know there are better options!
Mikey! Take care of your guys!
.
Should patina that engine paint to, it's too new looking
Good advice! We might just do that!
A full 16 minutes before we hear Tim's voice and he's not featured at all in the video. 😭
We should put Tim's voice in one of those talking birthday cards! lol
Would rather hear shop sounds not music
A majority of the video is Timelapse. So if there's no music, there wouldn't be sound at all
@@SalvagetoSavage get Oscar to do some grinding in the background.
I swear,people will drop a POS LS In anything! Nothing but junk !
What do you drive Paul?
@@SalvagetoSavage well I can tell you this,it's not a Chevy and it sure as hell don't have a LS in it !
And yes I've dealt with and LS my step-son had a 95 Camero with one in it, needless to say he finally sold it for junk !
Nah!!! This build is wack 😒