Try to find a video on RUclips with a test of how to apply heat-conducting paste. No bobek for the middle, but better to make a cross from corner to corner. Then the paste is all over the surface of the GPU. Otherwise, it does not have to dissipate the heat over the entire surface and the work was useless.
i have rx580 nitro and i succesfully replaced thermal paste thanks to you my guy
What size are the thermal pads recommended for this GPU
Where you get termo pad?
Just wanna share.. I used 0.5mm on vram and vrms.. and 1.0 on backplate.. all working good..i also do oc up to 1400 on core and 2200 memory..
bro I have the same gpu, can you share your OC settings?
@@N0M3RCYLP do it auto in adrenalin drivers ...
Try to find a video on RUclips with a test of how to apply heat-conducting paste. No bobek for the middle, but better to make a cross from corner to corner. Then the paste is all over the surface of the GPU. Otherwise, it does not have to dissipate the heat over the entire surface and the work was useless.
pozor na ty bobky no
Thanx for video . How many theral pad tickness mm?
You welcome, 1mm. 👋
Thank you so much it's very useful for me Nitro sapphire rx 570 amazing gpu...
Spessor thermal pad 1mm?
MVP: Toothbrush
Can't with them, Can't without them. 🤣
Thanks
What is that spray?
Isopropyl alc. 😅
Same gpu. Can i ask what brand the thermal pads. And size. And the thermas paste also. Thank you!
Im using thermal grizzly minus pad 8 the sizes are 0.5mm on vram and vrms.. and 1.0 on backplate..
Is 1 thermalpad that size 95 × 45 mm can cover all the component that needed it ?
I think so. 👍
Which is the tickness for thermal pads?
I think 0.5 but you can use 1mm. 👍
@@Chichinjo 1mm for what? Vram or vrm?
Both...
They are 0.75mm. I used a brand called BCI who make a 0.8mm.
Nice video, but you missed the before and after temperatures.
There is an after short video at the end, from miner. 😅
If you put the wrong pads, you'll get it hotter.
@@Jahus
You mean the thickness?!
@@GabrieLight Yes. If you put pads that are too thick or too thin, the card gets hotter than without pads at all. Tested on many 570 cards.
@@Jahus
Thanks for your answer 👍