2003-2008 Toyota Corolla S Tail light remove and install

Simple install of the tail lights. This is much easier than Honda's tail light removal.
Tools:
amzn.to/2awcRDO 3/8 ratchet
amzn.to/2aYXnIy 3/8 10mm deep socket
amzn.to/2bDluhn clip removal tool
Parts:
amzn.to/2bDmYIs Tail light
Torque specs:
amzn.to/2aDZqER 3/8 Torque wrench
10-12 ft. lbs - Tail light bolts
like and share this video!
If you have any questions or concerns, feel free to leave comments on our FB page.
Like us on Facebook
bit.ly/nutzabou...
and SUBSCRIBE!
bit.ly/NutzAbou...
Intro: RavenProDesign
www.RavenProDes...
Music: Manic Bloom - Death and Conversation
/ manicbloom

[@FromMyEyesToYours]

Thanks for posting. It looks like I thought it would. Should be no problem when I finally switch it out. I just wanted to post and say that you have a great voice communication mannerism that explains the complete details with clarity-- unlike a lot of YT automotive videos that end up confusing people more than helping them-- so my hat is off to you for that.

[@braylonsmomma]

Just changed out my tail light all by myself thanks to your video! Thank you for posting!

[@NutzAboutBolts]

Nice work 👍🏼

[@wassihun23]

Thanks for making this video, it helped me to change my tail light just within few minutes. I never done it before but it was so easy after watching this video. Cheers!

[@rehannasir9547]

great camera placement. helpful vid.

[@davidfalchek3198]

Thanks for the helpful video. Really, this can be a 15 minute job thanks to this guidance. For me, the most difficult part was disconnecting the wire assembly. Videos tend to glaze over it, but it takes some finesse.

[@madblackscomedy5733]

Thanks for the video, I'll be changing mine shortly. Saves me money.

[@javeeangelogonzales5351]

Thank you! Your a big help

[@NutzAboutBolts]

Glad the video was helpful 🙌🏽

[@Lincolnator721]

Wait. What's the issue with aftermarket headlamps and taillamps? I think they're sweet.

[@joelewis2267]

Legend has it that the second body pin is still being a turkey. 1:17

[@smithdsmit]

The only thing that was hard for me is disconnecting original tail light assembly . The connector was hard to get unhooked

[@357bullfrog]

Thanks for the information. First class repair job too

[@EKEACRES]

Thanks for sharing. I'm doing this same job today. Clever channel name by the way.

[@floatpvnk]

I'm watching this to swap mine for aftermarket 🤣🤣 thanks for posting all these 08 corolla videos. When I swapped out my headlights though I notice I have a fairly noticeable gap on the tops. Dak what I can do to fix rhis? Also missing 2 bolts and the clips from the sides of the light housing as I had to use manual tools to get everything out/in. Maybe this has something to do with it, not sure. First time doing any mods on a car.

[@carlgoogle2869]

Thank you.

[@tbr187]

Great job on another great video. Can use this video to change out many similar vehicles. Thanks for the video, keep them coming. TBR from Michigan

[@NutzAboutBolts]

+tbr187 thanks :)

[@mohammadabughali85]

I really like all your videos, they are very helpful indeed.
can you give me a piece of advice, i find water under my feet on the driver's side floor mat and in the rear driver floor mat.
my car is a Prius 2014.
Please HELP !!

[@NutzAboutBolts]

+Mohammad Abu Ghali does it happen only when you turn on the AC for along time?

[@mohammadabughali85]

Yes.

[@NutzAboutBolts]

Mohammad Abu Ghali
I think what happen was your evaporator tubing leaked into your carpet area instead of outside of the vehicle where the tubing is suppose to be pointing at. You want to remove your carpet area on the passenger side and see if you can pull the evap tubing and put it in the correct spot. Make sure to do it asap or else mold and mildew will build up and cause a bad odor in your vehicle.

[@zubyyynaijaaa2677]

Hey, Is it possible to take off the actual protective glass?
PS: I was trying to add a sticker to the brake light but if I add it on the outside, when it rains, it is in danger of getting lose. So I wanted to add it inside the glass.

[@NutzAboutBolts]

No, it’s a sealed unit

[@MichaelHarrisIreland]

Thanks, very good

[@kojot3og392]

What's the name of that corner underneath the tail light?

[@patrickalamani7148]

How to take out the house for backing light?

[@johng3975]

"No tools required"
*use the drill to remove nuts that u could by hand*

[@AlexOrtiz-ok9uu]

Sent you suppose to have gloves for touching the bulbs because it could leave oils from your fingers causing it to eventually blow out ?? ... helpful video though .... lol thanks !

[@ChrisLim-if4rk]

Hey where do you throw the old parts? Can we just put it in the trash can?

[@NutzAboutBolts]

Yep, in the trash