@@Eww123 I ended up accidentally tearing wires to the speaker box on the inside that makes the little beep noise upon activation, that & the ribbon wire connected to the disc drive, it allows power to the on/off button was tedious to either take out or put back in. But for anyone who’s capable & if your careful, it’s not hard at all.
Since nobody seems to have mentioned it: The ZIF (zero insertion force) socket the ribbon cable is connected by, has the locking mechanism briefly shown but not properly explained. To release the ribbon you pull out gently on BOTH sides of the locking mechanism (the darker tan part), which unlocks it. The cable can then be removed with nearly "Zero Force", and without damage. When reconnecting, this lock must be unlocked as well, and should require again zero insertion force to put it back in. The trick is when putting the ribbon back in it often will push the locking arm back in part way if you're not careful (it's an easy mistake to make) so it helps to hold out on the lock gently while sliding the ribbon cable back in. Then simply push the lock closed again. Hope this helps all the people who were having trouble reassembling.
@@kristianfierro8644 honestly dumb luck, since i failed twice and at the third time got it, but after that i cant get it back together for the life of me
First time fixer of anything console-related and I just wanted to say thanks for this really calm and detailed video. Was still a little nervous I'd break something, but followed all of the tips and got my Xbox cleaned and running like new (kinda)
For anyone wondering, Once you take the rib ion cable off, take the front casing off the top of Xbox. It’s easier then trying to put it back on with the top and front screen n together. It’s also easier if you push the little clip out all the way without breaking it. 6:44 (that clip). You can put the ribbon cable back in easier. All in all I think everyone should give this a try and definitely clean the Xbox. Don’t be scared at all. It was my first time after 6 years of having my Xbox and I never broke a single part and just took everything off carefully. Put the screws in a bowl don’t lose them. Tools you will need though is: T8 Tork T10 Tork Flat screw driver. (Tiny is best) bigger screw drivers break plastic.
@@jaydenyeates7116 hopefully that made sense to you. Let me know how it goes! It’s very easy. May take an hour or so. Just be careful putting that together
Tip for anyone with problems with the top cover: You can unclip the top cover and the panel with the Xbox button on it from eachother. Put the top cover on first, then get the front panel and put the ribbon cable in. Put the bottom clips of the front panel in first and then the top Helped me out hopefully it helps you too
Dude I know it’s been almost a year since you posted this but goddamn what a headache you just saved me. Was so annoying trying to fit the whole thing over, didn’t even notice those clips 😂
The hardest part is not messing up the power ribbon on the front of the console, that’s the really risky part cause it’s super easy to break and if u break it ur console will not turn on or it will turn on and turn it self back off. But honestly if u take ur time and just be really gentle you can do it and after that everything else is cake and straight forward. First time I took mine apart to clean I did exactly that I damaged the ribbon and occasionally my console will turn on and off by it self because that ribbon is sooo sensitive 😂😂
aris z. Fam, I pulled the top bit off and the ribbon thing came off, then I put it back in the yellow thing, I watch 2 seconds later and he takes it out, thank god mine didn’t snap
Thank you very much for taking the time to make this video. Very clear instructions that really help save you from shipping off for expensive repair. People, if your good mechanically and have patience. It's no problem.
Trust me you should do it just make sure you don't unplug the cables in the front and you will be able to reach the fan and the vents my vents we're just about clogged
Red Eclipse I wouldn’t if I was you putting it back on is the hard part and trying not to break your ribbon at the same time. Microsoft has designed Xbox ones appallingly and when someone does a video and not shows you how to correctly put it back on......
I've cleaned my Xbox one and wanted to cry as I was struggling with the power ribbon lol, I finally got it on, started it up and it works, thank you for the tutorial but maybe you could put a video up to show getting the ribbon on easily so people don't stress as much as I did.... Just saying. Again, great tutorial
Thanks man. Great tutorial for opening the Xbox One. I was able to open the console, take everything apart, clean it, and put it back together again. The front face plate can be separated from the top cover as well. It makes it easier to put the front ribbon cable back.
Thank you for the detailed description and discreet instructions on how to do everything along with specific screw driver sizes as well as crew locations. Really appreciate your time doing this!
I just want to say as a 1st timer taking apart any console this is the best described video I've seen. Thank you for all the explanation and the help of everything .
I appreciate this video a lot, my ventilation has been messing with my Xbox for about a year but I finally opened it up and blew all the dust out thank you man!!
Since my One started lagging and overheating I knew it needed a clean and this video saved my ass. Tough as a person with big hands I almost threw a fit at the damn ribbon cable but installing the front plate first made it a lot easier. It's running smooth and silent now again (cleaned out tons of dust)
@@MODDEDWARFARE I have 2 questions. 1) Can you remove the metal top of the interior to clean the fan without removing the ribbon cable? I have steady hands and could probably deal with the ribbon cable just fine, but last time I cleaned my Xbox I almost screwed up the WiFi/Bluetooth cord because I didn’t know you needed to remove the cord before taking off the circuit board for it. (Luckily me and my cousin fixed it with electrical tape) 2) I’ve been having a problem keeping my remotes connected to the console. Whenever I play, after a while they have problems staying connected and when they do it’s whenever my hands are sweaty.I’d like to know if it’s because I almost screwed up the WiFi/Bluetooth circuit board cord or if it’s just because my hands over heat them.
This really helped me a lot. Had to clean a 10-year old system I owned since the first XBOX ONEs came out. I appreciate the video and the straightforwardness of it.
just did this today, followed the steps and got myself some cleaner and duster. used my dads screwdriver for the torx heads, and finished it in about an hour. putting it back together was super easy once you remember where each thing went. no issue with my disk drive, cleaned all the dust off my of Xbox one and now it sounds like brand new. it had been whirring up loudly for a while and I guessed that a bunch of dust had built up. theat was indeed the case. This fixed the issue immediately. Cant even hear my Xbox now.
I did not do anything to the power brick, didn't have to. If you have an issue with that it could be a power connector port issue when you opened it and reset it, or something else entirely. Me opening mine was solely for cleaning purposes. And no, performance is performance, it just runs much quieter and sounds brand new. Doesn't need to work as hard now.
I appreciate how you don't mention the other part of the wifi cord I took it off without knowing of it I think I fixed but now I have to put it back together and hope for the best👍
Lol 😂 very helpful a lot easier than expected! I really had no choice after the console wouldn’t turn on anymore, so might as well just take a stab at it. I got it to work, lining up the cd tray was tricky but I got it to work. Anyways cheers!
I desperately needed to clean my fan because something was seriously wrong with it and it was affecting my entire console and this tutorial helped a lot, Thank you. I thought for sure I ruined that ribbon Cable in the front but everything worked out okay and both the power button and eject button still work.
One of my XBOXs was overheating quite often and I suspected it was because the vents were clogged with cat hair and dust and a great deal of neglect, thanx to your video I was able to open it and sure enough that's exactly what I found.
Thank you, mine was starting to sound like a lawn mower and overheating, took it apart and clean the dust out and problem solved. I would have ripped the power and eject cable off if I didn't watch this
@@Blue-vd6bv Yeah, to a point, but putting the top of the case back on is proving to be a problem for me right now, i can't get the angle to push the side down onto the clips.
Thanks so much dude. My xbox would be at a million degrees right after booting before even launching a game but i learned how to clean it and now its cool as ever.
Cheers geezer. You made it really simple and straightforward. I went in to find out why the WiFi wasn't working after being told that somebody had already had a go. Only turns out that they hadn't connected the antenna and possibly not the module either though it could just be that the connector came away to easily when I lifted the fan grill up.
If you're having trouble with reassembly (like I was for 20 minutes). Try to separate the top plastic from the front plate plastic. 1) The top plate clips in flawlessly followed by the front plate plastic 2) You'll have a MUCH easier time connecting the ribbon cable as the top plastic won't be in your way and can you connect the ribbon cable with EASE.
@@Charlie-kt6sx do uk what to do to your power brick cause i did mine correctly but now my fuckin power brick is just stuck on orange 🤦♂️ it wasnt doing that until i took it apart and put it back together
T Gwap open it up and check if it’s snapped if not u can re attatch it don’t worry search up somebody putting it back on that’s what I did and my Xbox was perfectly fine
@@Charlie-kt6sx i got the cover on before and the xbox wouldnt turn on using the power button is the xbox done for after that ? Or is there a way to fix it ?
Pretty thorough video... years later this is helpful! Ither than the Ribbon cable keeper unlock procedure (Solved by others in comments below), this was spot on!
I dropped this brick about a foot a while ago. It unhinged all the clips and now I realize it almost ripped the ribbon cable. But all these parts broke open, so I pushed em back together. Works ok, but I'm gonna clean now! Thank you good video
I just did mine. And however now my touch buttons don't work, and the eject sound keeps beeping, I am sure I connected the ribbon back in place and didn't break it. But any ideas would be helpful
Thank you so much dude this actually helped out a lot with cleaning my Xbox it was just a huge pile of dust inside of it and your video helped me clean it and make it so my Xbox can function properly without overheating severely
Thanks for this tuto I took apart any electronic things I have, to clean up most of the time, and xbox one is the clearest thing take apart then rebuild I had to work on 😊
Cleaning my fan after 12 years or so and it went from overheating every 5 seconds and sounding like a nuclear reactor to complete silence and ever so better run time worked perfect thanks for most of your video
to put it back together, you need to disassemble the front part of the Xbox, because the front cover where the buttons are located is connected to the top panel which has the fan, so you need to disconnect those two panels and connect them back to the main frame as 2 different pieces
I use my likes to maintain a music list on RUclips so I can't give you that but I'm cleaning my Xbox after 10 years of use your video definitely helped, thank you
I didn't have the screwdriver required to do the job and I told myself I wasn't spending anymore money on this thing so I broke the top plastic piece and then started punching the top metal part. Good video though, very explanatory and easy to understand.
+xXModdedWarfareXx Jtag Tutorials #36 How to Install Black Ops 2 Mod Menu's I did everything right and i got a black screen when i open the BO2 on XEX menu
Cool. I got stuck and didn’t wanna break tabs so I found your lil video useful as I believe I can now get to the Faulty HDMI port and replace it. Thanks again
Thanks man you made my life all more easy I literally took my Xbox one apart while I watched your video I had to pause and play a few times but I was able to totally disassemble my Xbox and I’m cleaning it out now without hurting it anywhere so thank you for your video after like 5 years it was time to open it up for the first time 😂🙌🏼
Also thanks, I’ve learn a lot from your video, I’m opening up a business, where people could just bring in or send their console for cleaning or upgrade, this includes console infestation and other cleaning
Thanks. My fan made a bad noise every time it got hot. After watching your tutorial, I took it apart and found someone (probably one of my kids) had pushed down on the top and broke one of the arms supporting the fan. I fixed it and I'm good to go.
I did half of it because I was afraid it’s fine. Put it back in it won’t work I’m glad I saw this because I was having problems with overheating. I have a fun I thought it will work but I got to clean it so I follow your instructions and clean the parts that had dust in it I even had to use a vacuum thing to clean I saw it from someone and glad I’m learning something new I just hope it never turn off again with overheating it help me a lot even tho I left a lil gap on the bottom idk if it smart that can get much air and all I just hope it and see how it goes I thank you so much specially that sticker on the side I didn’t know that glad I hear it and put it back thank god I got it threw it it kept turning me off bc of hearing I pray it never happen again thanks for this 🙏🏾💯
This was a great, thorough tutorial. I had to come rewatch the process bc I recently became paranoid to turn my Xbox on after I put it back together a while back, and I haven’t used it since, so I forgot whether or not it needed thermal paste. I just did a basic dusting of every part to make sure it was good, but I did a PS4 afterward and that required me to replace some thermal paste, bc I mainly needed to look at the motherboard itself, so I wanted to make sure I wouldn’t blow my Xbox up. 😂 but I think I’m good now, thanks to this video.
Thank u so much I woke up this morning and I kicked the Xbox on accident and the front panel fell off and I didn't know what to do but this really helped and now I can play my Xbox 😀
How many people just what to clean the fan?
Did you do it?
Yes
What did it cost?
Everything
@@Hecor._. was there any issues with you cleaning it afterwards? Like things I should avoid, or be careful about?
I want but and the disk drive area
@@Eww123 I ended up accidentally tearing wires to the speaker box on the inside that makes the little beep noise upon activation, that & the ribbon wire connected to the disc drive, it allows power to the on/off button was tedious to either take out or put back in. But for anyone who’s capable & if your careful, it’s not hard at all.
@Rex the brrrrrrrt e brrrt?
Cleaning my fan after 7 years
E to
Yeah this thing is dirty
lol yeah me to
Ive had it for so long even the series s already came out
Me too just really loud hey
@@brycelandon2110 I did it everything works
Since nobody seems to have mentioned it: The ZIF (zero insertion force) socket the ribbon cable is connected by, has the locking mechanism briefly shown but not properly explained. To release the ribbon you pull out gently on BOTH sides of the locking mechanism (the darker tan part), which unlocks it. The cable can then be removed with nearly "Zero Force", and without damage. When reconnecting, this lock must be unlocked as well, and should require again zero insertion force to put it back in. The trick is when putting the ribbon back in it often will push the locking arm back in part way if you're not careful (it's an easy mistake to make) so it helps to hold out on the lock gently while sliding the ribbon cable back in. Then simply push the lock closed again. Hope this helps all the people who were having trouble reassembling.
Thank You so much! This should be pinned!
Not all heroes wear capes.
Thanks. I was thinking that he should be clear about how to properly release the ribbon.
Bless 🙏
Wait hold up your talking about the blue thingy right?
Whoever designed that front ribbon cable should be fired immediately.
Ong been struggling with it for 3 hours now.... 👁👄👁
How did you get it to work my home button and the eject button don’t work
@@kristianfierro8644 honestly dumb luck, since i failed twice and at the third time got it, but after that i cant get it back together for the life of me
@@kristianfierro8644 you may have broke the ribbon
Yeah I chopped both red and black cables when I tried to snap the Xbox back together 😢
First time fixer of anything console-related and I just wanted to say thanks for this really calm and detailed video. Was still a little nervous I'd break something, but followed all of the tips and got my Xbox cleaned and running like new (kinda)
why cant they make it like PC. open one side and access everything.
iam so pissed.
Pc are for mods untill satisfied and Xbox and phones are meant to be replaced
Karl Johansen or like ps4
@@michaelmora7520 so what? Just factory solder and upgradability is no more. It will be easier for everyone to maintain them.
@@psychoalert1823 I guess they want you to buy new shit ¯\_(ツ)_/¯
@@psychoalert1823 that's would make it easy for people to mod
For anyone wondering, Once you take the rib ion cable off, take the front casing off the top of Xbox. It’s easier then trying to put it back on with the top and front screen n together. It’s also easier if you push the little clip out all the way without breaking it. 6:44 (that clip). You can put the ribbon cable back in easier.
All in all I think everyone should give this a try and definitely clean the Xbox. Don’t be scared at all. It was my first time after 6 years of having my Xbox and I never broke a single part and just took everything off carefully. Put the screws in a bowl don’t lose them.
Tools you will need though is:
T8 Tork
T10 Tork
Flat screw driver. (Tiny is best) bigger screw drivers break plastic.
Thank you, I was about to sit in the corner and cry after spending so long trying to get the cable back on
@@jaydenyeates7116 hopefully that made sense to you. Let me know how it goes! It’s very easy. May take an hour or so. Just be careful putting that together
"Cleaned" mine today, was honestly disappointed. Expected it to be full of dust, but there hardly was any there. Feels weird when it's been so long.
@@ano_nym mine was dusty, worked way better when I cleaned it
This comment deserves a gold star.
For the warranty sticker just live in south Louisiana my sticker came right off just from heat and humidity
Jon Judice fr
Same
Jon Judice same lol
I live in the north Louisiana
Lol
Ok I just took everything apart to clean it
*Now to put it back together*
LMAO clamping the shell back was a pain in the ass for me
@@ibitebagels3510 I put mine back together the exact same way I took it apart but now the disk drive isn't aligned lol
3301 how the fuck ahaha
watch it in reverse
Watch vid in reverse
Tip for anyone with problems with the top cover: You can unclip the top cover and the panel with the Xbox button on it from eachother. Put the top cover on first, then get the front panel and put the ribbon cable in. Put the bottom clips of the front panel in first and then the top
Helped me out hopefully it helps you too
Dude this saved me I couldn't do it 😅
@@russellbennett6281 np, I was struggling for 40 minutes and then I saw the clips and detached them and found out that was easier
Dude I know it’s been almost a year since you posted this but goddamn what a headache you just saved me. Was so annoying trying to fit the whole thing over, didn’t even notice those clips 😂
Hardest part by far! Thank you for this comment-tip.
Thank you
I really need to do this but im in too scared I'll mess it up lol
Elizabeth Pittillo same
Look once you do and keep doing it you get better
The hardest part is not messing up the power ribbon on the front of the console, that’s the really risky part cause it’s super easy to break and if u break it ur console will not turn on or it will turn on and turn it self back off. But honestly if u take ur time and just be really gentle you can do it and after that everything else is cake and straight forward. First time I took mine apart to clean I did exactly that I damaged the ribbon and occasionally my console will turn on and off by it self because that ribbon is sooo sensitive 😂😂
Same here
aris z. Fam, I pulled the top bit off and the ribbon thing came off, then I put it back in the yellow thing, I watch 2 seconds later and he takes it out, thank god mine didn’t snap
Thank you very much for taking the time to make this video. Very clear instructions that really help save you from shipping off for expensive repair. People, if your good mechanically and have patience. It's no problem.
Dang I just wanted to clean out my fan but the risk is a little much
Same
Trust me you should do it just make sure you don't unplug the cables in the front and you will be able to reach the fan and the vents my vents we're just about clogged
Red Eclipse I wouldn’t if I was you putting it back on is the hard part and trying not to break your ribbon at the same time. Microsoft has designed Xbox ones appallingly and when someone does a video and not shows you how to correctly put it back on......
nishank chatterjee My Xbox Actually Just Overheated Which Has Never Happened To Me In The Last 3 Years
I was scared aswell so I only took of the grill
I've cleaned my Xbox one and wanted to cry as I was struggling with the power ribbon lol, I finally got it on, started it up and it works, thank you for the tutorial but maybe you could put a video up to show getting the ribbon on easily so people don't stress as much as I did.... Just saying.
Again, great tutorial
I agree with you just clean mine today 😮💨
See my reply below on this. ITs easy, he only showed releasing one side of the keeper part. You release both sides, and repeat opposite going back in.
Hey thanks for giving me hope that i could put the ribon cable on after many attempts
Thanks man. Great tutorial for opening the Xbox One. I was able to open the console, take everything apart, clean it, and put it back together again. The front face plate can be separated from the top cover as well. It makes it easier to put the front ribbon cable back.
Thank you so much that made putting the ribbon cable and the top case back way easier
Thank you for this tip
thank you found a hive of roaches
M0N5T3R GAMING Savage!
Rip
M0N5T3R GAMING really
Thats funny because i had the same issue lol
Same here
Yeah I use a blowtorch too. To dry my hair I mean
I use it to brush my teeth
@@rianaventer7882 me too idk why my mouth is so dark tho
Thank you for the detailed description and discreet instructions on how to do everything along with specific screw driver sizes as well as crew locations. Really appreciate your time doing this!
I just want to say as a 1st timer taking apart any console this is the best described video I've seen. Thank you for all the explanation and the help of everything .
I love how this was made 6 years ago with 1.1 million views currently. In December 2022 I found it very useful thank you so much.
Him : *suggests loads of tools to use. Me:* doesn’t have any of them.
Also me : “knife “
Same
Dead ass used a shadow blade😂😂😂
Bruh same
Not all hero’s wear capes
😂😂😂
I appreciate this video a lot, my ventilation has been messing with my Xbox for about a year but I finally opened it up and blew all the dust out thank you man!!
Bro why is it so easy for you everything is stuck, im pissed.
I can’t even get the cover off because the first bit refuses to stay unconnected
Also the ribbon cable is also used for syncing your new controllers! Keep that in mind if you keep it disconnected
Since my One started lagging and overheating I knew it needed a clean and this video saved my ass. Tough as a person with big hands I almost threw a fit at the damn ribbon cable but installing the front plate first made it a lot easier. It's running smooth and silent now again (cleaned out tons of dust)
This video was a huge help! Coming from a mom with two boys that had their world come crashing down, you're a lifesaver!
Heather Kelley lol
"Use a hair drying to take the sticker off" Uses a blow torch and burns the edge immediately. LMFAOOOOOOOO
I couldn't find a hair dryer :(
Tbh the hair dryer wouldn’t burn it if you know how to do it right
lmfaoooo as soon as he tried it was ruined
@@MODDEDWARFARE I have 2 questions.
1) Can you remove the metal top of the interior to clean the fan without removing the ribbon cable? I have steady hands and could probably deal with the ribbon cable just fine, but last time I cleaned my Xbox I almost screwed up the WiFi/Bluetooth cord because I didn’t know you needed to remove the cord before taking off the circuit board for it. (Luckily me and my cousin fixed it with electrical tape)
2) I’ve been having a problem keeping my remotes connected to the console. Whenever I play, after a while they have problems staying connected and when they do it’s whenever my hands are sweaty.I’d like to know if it’s because I almost screwed up the WiFi/Bluetooth circuit board cord or if it’s just because my hands over heat them.
@@MODDEDWARFARE THAT only means you need to get yourself a girlfriend.
Instructions unclear Xbox turned into an autobot.
Turn it into a PC lol
This is still, by far, the best tutorial on how to open your Xbox console 🔥
This really helped me a lot. Had to clean a 10-year old system I owned since the first XBOX ONEs came out. I appreciate the video and the straightforwardness of it.
You're a lifesaver, this helped me get my xbox running again after a spill. Thank you!
just did this today, followed the steps and got myself some cleaner and duster. used my dads screwdriver for the torx heads, and finished it in about an hour. putting it back together was super easy once you remember where each thing went. no issue with my disk drive, cleaned all the dust off my of Xbox one and now it sounds like brand new. it had been whirring up loudly for a while and I guessed that a bunch of dust had built up. theat was indeed the case. This fixed the issue immediately. Cant even hear my Xbox now.
Does it make games load faster?
aye what u do to yo Power brick cause i did mine right and put it back right but it made my power brick stuck on orange
I did not do anything to the power brick, didn't have to. If you have an issue with that it could be a power connector port issue when you opened it and reset it, or something else entirely. Me opening mine was solely for cleaning purposes. And no, performance is performance, it just runs much quieter and sounds brand new. Doesn't need to work as hard now.
@@DTHumphrys does it make game load faster when you cleaned the inside?
I appreciate how you don't mention the other part of the wifi cord I took it off without knowing of it I think I fixed but now I have to put it back together and hope for the best👍
Same
Wow 4 years and this is still the most useful vid
I have one of these bad boys since 2014 and it needs some serious cleanup so this vid is really helpful, thanks a lot 😅
" So I tried to go one step further and use a blow torch, *as you do* " LOL
That's not a hairdryer😂
😂😂😂😂😂😂
Right 😂💀
He said he used a blow torch
Yes it is
I use it all the time
Lol 😂 very helpful a lot easier than expected! I really had no choice after the console wouldn’t turn on anymore, so might as well just take a stab at it. I got it to work, lining up the cd tray was tricky but I got it to work. Anyways cheers!
Thank you for this detailed tutorial. It was very dusty in there. Now I can play without the overheating warning screen.
I desperately needed to clean my fan because something was seriously wrong with it and it was affecting my entire console and this tutorial helped a lot, Thank you. I thought for sure I ruined that ribbon Cable in the front but everything worked out okay and both the power button and eject button still work.
So the 360 just gained weight?
A good thing. 😉 More space, more airflow in turn keeps electronics cool in turn again, last longer.
She has been going through some rough times
this was really helpful, would've been easier if there was a reasambelly though
Do steps backwards
Play the video backwards
8:07 my flat head broke
Mine bent
Thank you for a simple, no-nonsense guide.
One of my XBOXs was overheating quite often and I suspected it was because the vents were clogged with cat hair and dust and a great deal of neglect, thanx to your video I was able to open it and sure enough that's exactly what I found.
Thank you, mine was starting to sound like a lawn mower and overheating, took it apart and clean the dust out and problem solved. I would have ripped the power and eject cable off if I didn't watch this
Mine is doing the same thing and I'm thinking about trying this
Ok now that I have it all taken apart, how do I put it back together?
In reverse
@@Blue-vd6bv Yeah, to a point, but putting the top of the case back on is proving to be a problem for me right now, i can't get the angle to push the side down onto the clips.
@@UnknownUserZeroZero same have u fount a video on it cause my hood or the top part it won't clip back in and I can't play disc games if it dosent
5k subscribers without any vids yo did you find out how to do it
Very helpful, thank you - my disc drive stopped reading discs so looking to replace it and give the thing a general cleanup 👍🏻
Thanks so much dude. My xbox would be at a million degrees right after booting before even launching a game but i learned how to clean it and now its cool as ever.
Cheers geezer. You made it really simple and straightforward. I went in to find out why the WiFi wasn't working after being told that somebody had already had a go. Only turns out that they hadn't connected the antenna and possibly not the module either though it could just be that the connector came away to easily when I lifted the fan grill up.
My controller and wifi has stopped working after opening the xbox one. I think you faced the similar issue? Any suggestion please?
The hardest part is putting it back together
That was the easiest
My front end won’t snap back together
@@0fficial_dan607 fr
@@0fficial_dan607 yes same
@@sigurdtheodorsen571 lmao same
Cleaning mine after about 8 years
Zor oldu mu ya ben acayip tırsıyorum bozucam diye ama uçak pervanesi gibi çalışıyor artık :(
My warranty sticker just came off no problem.
10 years, finally doing a deep clean. I barely use it but now I want it to last couple runs 💪🏿
When your an angry parent but you don't want to break expensive gaming equipment and traumatize your child
3:14 step so fucking frustrating
If you're having trouble with reassembly (like I was for 20 minutes). Try to separate the top plastic from the front plate plastic.
1) The top plate clips in flawlessly followed by the front plate plastic
2) You'll have a MUCH easier time connecting the ribbon cable as the top plastic won't be in your way and can you connect the ribbon cable with EASE.
Instructions followed incorrectly I have know broke my Xbox
Same I snapped my ribbon now I am crying my eyes out
@@Charlie-kt6sx do uk what to do to your power brick cause i did mine correctly but now my fuckin power brick is just stuck on orange 🤦♂️ it wasnt doing that until i took it apart and put it back together
@@Charlie-kt6sx im crying my eyes out
T Gwap open it up and check if it’s snapped if not u can re attatch it don’t worry search up somebody putting it back on that’s what I did and my Xbox was perfectly fine
@@Charlie-kt6sx i got the cover on before and the xbox wouldnt turn on using the power button is the xbox done for after that ? Or is there a way to fix it ?
Pretty thorough video... years later this is helpful!
Ither than the Ribbon cable keeper unlock procedure (Solved by others in comments below), this was spot on!
I dropped this brick about a foot a while ago. It unhinged all the clips and now I realize it almost ripped the ribbon cable. But all these parts broke open, so I pushed em back together. Works ok, but I'm gonna clean now! Thank you good video
you should put led lights in it
I just did mine. And however now my touch buttons don't work, and the eject sound keeps beeping, I am sure I connected the ribbon back in place and didn't break it. But any ideas would be helpful
Check that you plugged the ribbon cable the right way round.
At 5:46 you skipped something, as my front part of the console is not bending at all.. and yours is? How did you do that by just detaching the rear?
Thank you so much dude this actually helped out a lot with cleaning my Xbox it was just a huge pile of dust inside of it and your video helped me clean it and make it so my Xbox can function properly without overheating severely
Thanks for this tuto I took apart any electronic things I have, to clean up most of the time, and xbox one is the clearest thing take apart then rebuild I had to work on 😊
how the fuck do you put the front back on
Did you end up figuring it out because I’m stuck trying to put it back on 😭
Took me a bit to figure it out. You just gotta line up the clips just right in the front panel so it snaps back in
I cant wait for the Xbox one JTAG
I don't like xbox model,looks like shoe box.
bijay singh shoe box?! It looks more like a fucking printer
Can't wait till when there's a way to jtag a xbox one :)
+XxgamesHDxX there is its been out for so long now lmao
GBearGaming lol are you dumb?
GBearGaming nope, not even now
Cleaning my fan after 12 years or so and it went from overheating every 5 seconds and sounding like a nuclear reactor to complete silence and ever so better run time worked perfect thanks for most of your video
to put it back together, you need to disassemble the front part of the Xbox, because the front cover where the buttons are located is connected to the top panel which has the fan, so you need to disconnect those two panels and connect them back to the main frame as 2 different pieces
I’m trying to figure out how to clean my disk and fan
why open an xbox one ? can you make a tutorial How to install LED ?
To clean it from collected dust in some cases
HOW TF DO YOU RECLOSE THIS?! SHITS A PAIN
Ikr
It just doesn't work
UPDATEEEEE: REMOVE FRONT PANEL FROM TOP, PUT ON FRONT PANEL THEN PUT ON TOP!!! DO NOT REMOVE RIBBON- UNNECESSARY!! HOPE IT HELPS!!!
@@shaneeshleman4233 ^^
Yes I found another video that showed that, although I found it easier to put the top on then the front panel
I use my likes to maintain a music list on RUclips so I can't give you that but I'm cleaning my Xbox after 10 years of use your video definitely helped, thank you
I didn't have the screwdriver required to do the job and I told myself I wasn't spending anymore money on this thing so I broke the top plastic piece and then started punching the top metal part. Good video though, very explanatory and easy to understand.
I tried this and wound up getting my foot stuck in my toaster...
*we will do a tutorial on how to change the LED color*
*colors the LED color*
*rip*
when i try to put my case on, the sides and the back click on well but the front isn’t connected properly? Someone help please
I broke the cable in the front and now my home button don’t work :(
@@turbo_tickler2073 RIP power button 🙏🙏🙏 🤣🤣🤣 but seriously damn that sucks
Khang Yeng I turn it on now from the controller by holding its button
@@Kamui916 did ur ribbon wire rip or is it just off the base thing it was on?
Good video bud...I would have completely ripped the ribbon cable had I not watched this. Thanks a bunch!
Thank very much needed my first time taken apart and Xbox
first clean since 5th grade.
i’m about to start 11th grade
First clean since kindergarten.. recently entered 5th grade
first clean since 4th grade
i'm about to start 10th grade
This says how to take apart‘your’ Xbox one, but I need to take my friends apart, but I can’t find a tutorial for it, help?
lol
4th?
YTUID Spoofer ^
He's not the real xXModdedWarfareXx
OMFG :O
Could u do a update for appnet2. I think i would be good if u do cause people are getting impatient, mad, and most likely dispute.
+iPad Panda how to do you know?
+xXModdedWarfareXx Jtag Tutorials #36 How to Install Black Ops 2 Mod Menu's
I did everything right and i got a black screen when i open the BO2 on XEX menu
Hey I'm having problems with waw when I load it up it don't work the screen goes black when I set it up with default mp.xex :(
You deserve everything my king 🤴
Cool. I got stuck and didn’t wanna break tabs so I found your lil video useful as I believe I can now get to the Faulty HDMI port and replace it.
Thanks again
I'm not trying to be mean but why does everyone talk so much just take it apart, why does everything is twice as long because of talking.
How do I rettach the ribbion cable?!
The Fab Duckling you can't
Tweezers
R.I.P
Thank god my Xbox has been ejecting itself
alphablood 119 my was too
Was it the “Hive of Roaches” ?
The Negative One "Roaches" !!! 😑fuck.
Love the cautious approach with the blowtorch just to watch it shrivel up......sometimes ya just don't know til ya go
Thanks man you made my life all more easy I literally took my Xbox one apart while I watched your video I had to pause and play a few times but I was able to totally disassemble my Xbox and I’m cleaning it out now without hurting it anywhere so thank you for your video after like 5 years it was time to open it up for the first time 😂🙌🏼
U were able to reput it together 😭😭
Not first
jeremie bergeron k
I needed to pop the top of a One to give it a much needed dusting, I thank you for the tutorial sir
Great no nonsense steps, now i gotta try to get power back in my xbox. Thank you
Also thanks, I’ve learn a lot from your video, I’m opening up a business, where people could just bring in or send their console for cleaning or upgrade, this includes console infestation and other cleaning
Thanks. My fan made a bad noise every time it got hot. After watching your tutorial, I took it apart and found someone (probably one of my kids) had pushed down on the top and broke one of the arms supporting the fan. I fixed it and I'm good to go.
I did half of it because I was afraid it’s fine. Put it back in it won’t work I’m glad I saw this because I was having problems with overheating. I have a fun I thought it will work but I got to clean it so I follow your instructions and clean the parts that had dust in it I even had to use a vacuum thing to clean I saw it from someone and glad I’m learning something new I just hope it never turn off again with overheating it help me a lot even tho I left a lil gap on the bottom idk if it smart that can get much air and all I just hope it and see how it goes I thank you so much specially that sticker on the side I didn’t know that glad I hear it and put it back thank god I got it threw it it kept turning me off bc of hearing I pray it never happen again thanks for this 🙏🏾💯
I got my xbox on opening day, and have never cleaned it till now. Thank you for your help.
How did you put the top cover back on
This was a great, thorough tutorial. I had to come rewatch the process bc I recently became paranoid to turn my Xbox on after I put it back together a while back, and I haven’t used it since, so I forgot whether or not it needed thermal paste. I just did a basic dusting of every part to make sure it was good, but I did a PS4 afterward and that required me to replace some thermal paste, bc I mainly needed to look at the motherboard itself, so I wanted to make sure I wouldn’t blow my Xbox up. 😂 but I think I’m good now, thanks to this video.
Thank u so much I woke up this morning and I kicked the Xbox on accident and the front panel fell off and I didn't know what to do but this really helped and now I can play my Xbox 😀
Xbox 1 was smelling like burnt dust and I was finally able to open and just clean it up. Thank you