Thank you for this 2nd little video even though I caught it after fighting with it the other way. I couldn’t fit my big hands so I got my wife to help me with her little hands. But now I’ll know for the next time. Lol
@@JoeyDoesTech hey mate for the cover disconnection of the xbox one can I do it with a thin knife or not before I start cleaning it up? Or can I able to use a plastic spatula if possible?
And this is why I love RUclips. People like you making videos like this makes things possible for the average people like me and so many others able to do things like this on our own. The only problem I struggled with, was that alignment in that first corner when putting the lid back on. Man, that was a struggle for me. Lol everything else went smooth. Thanks again.
The best way to do it is to insert at like a 45 degree angle to put all the hinges together and then force it in on the right side opposite of the side you took the plastic cover off and it should just sit in place in the back hinges very easily. Took me a while too😂but finally figured it out
Gonna sell me broken xbox I have to keep resetting it. The thing is I have it on with music Just so I can sleep with the loons around me. I might try take apart or just sell to a store who can always fix it
@@rickybobbyjr581d2 if the vid helped drop a like cuz it sure did for me, my system kept shutting down because it was protecting itself from overheating and it had good reason to, all the vents were clogged with dirt to the point where I could just tear like a banana peel
You're 100% right Hypno, and I'm sorry I didn't detail it enough. The blue ribbon cable should of had better angles, as well as putting the case back on. There is a pinned comment on this video of how to put the case back on ALOT easier than the way I've explained. Hope the rest of it wasn't too bad! I have learned 😁😁
Man, I was struggling for half an hour until I thought about checking the coms. Followed your tip and it didn't even take me a minute. Thank you very much!
@@oli2splashy I took mine apart again made sure the ribbon cable and other cables were attached properly and the eject button is working correctly now. Keep at it you'll get it, putting the case back together was annoying too so you have that to look forward to lol
Mine went smoothly. Very insightful and no complications other than that one corner clip was indeed tricky to get in place. Over all I like how quickly and easily your video walked me through. Nothing more annoying than a 30 minute video on something that can be done in about 5/10 minutes tops.
The amount of stress I got from doing this, but still managed to do it all because of ur amazing tutorial. Makes me want to give u the biggest hug. Thank you so much!!!!
If anyone has issues with disc's not going in or ejecting, even after using the manual eject button, I had those exact issues. I took the Xbox apart and pulled the disc drive out, pulled the cover off the disc drive and found that the pulley system that actually turns to pull the disc in was loose. The belt on one of the pulleys was loose and I realized the pulley itself had popped out of its proper location. I pushed it back in place with a flat head, the belt tightened and I reassembled the Xbox, and now the disc drive works fine.
FYI, The front side can be removed easily from the inside after you detach the rear and top panel before u remove the ribbon so you can easily clip it back on when you reassemble it without the hassle .
You lift up all of the upper, thin things and then you can push the lower thick things out and then the front can come right off. Totally removes the rage from this entire thing.
For anyone who doesn't have a proper prying tool.... Here's some potential alternatives that you might have laying around your house that can also likely do the job. A fingernail kit: the metal tool that cleans underneath your nails. The spatula from a Cricut tool set. ***(So long as you make sure that it doesn't bend or damage the spatula when prying as it is only intended to lift lightweight vinyl and cardstock. Not gaming console parts lol)*** A flat part of a metal hairclip The top metal piece on nail clippers that flips around. (So long as it's thin enough to get in between the pieces) A thin butter knife. For the makeup people... If you've got a tarte lash applicator tool, or similar, this will possibly do the trick. Just be careful you don't scratch the finish on your lash applicator in the process. A sturdy set of brow tweezers might work, too.
Thank you so much, cleaned my partners Xbox that hasn’t been cleaned in 8 years… safe to say it needed it. Putting the lid back on almost defeated me but I got there in the end. The click when it goes back on is SOMETHING ELSE😂
bro putting the final case on was so tedious. i was beginning to think that i’d have to go without a case 🤣. i was so glad when i got it back on and the click was so satisfying. cheers man for the guide though 👍
Thank you so much! I just successfully cleaned out my Xbox one original and you’re right the hardest part was aligning and snapping the plastic back together but after I realized you had the same issue I figured it out. Thank you again runs smooth and clean again 🧑🔧👍
When putting Xbox back together an easier way to do it is that there are clips at top front of case you can separate the case into 2 pieces should make it easy to connect.
Great guide! So, I know you asked to post about this in the comments.... So, I found a much easier way to attach the top cover during the final reassembly. I removed the face plate from the top cover. This made it so much easier to attach the ribbon cable. I attached the face plate to the console, pulled the face plate away just a bit and attached the top cover to the face plate and worked from front to back of the console. Much easier. Anyways, great video!! Hope this helps!
If you’re having trouble putting the shell back on watch the short in his pinned comment. I almost broke my xbox because the way he showed us in the original video is 40x harder. Also thank you for the video, as long as you make your way to the short it’s an amazing explanation.
When your putting the final shell on there’s a much easier way if you look under the top shell there’s a bunch clips holding the top and front shell together. Unclip tham and the front should come free from the top then put the front shell on first and the top second. Hope this helps
There's alot of people commentating this, and I might just need to upload a clip of me trying it as it seems REALLY useful! Thankyou for the heads up :)
Yoooooo dude your a freakinnnn life saver I spent like 1 hour and a half trying to get it on and looked in the comments and saw this thanksssss so muchhh bro
Thank you so much for posting this comment. Was struggling for a good 10 mins then seen what you said and had it put on in less than one minute. Thank you!
Thanks for the video. I was unable to get the shell back on perfect. Then again, this wasn't a professional job where presentation matters. As long as it's clean and snap on well enough. My original Xbox Day One thanks you! 8 years now, and finally clean.
When its gets to about a about a 45 degree angle, pull it slightly towards the back, slowly and firmly. Its going over something in the corner he mentions.The whole things just suddenly sits right.you will see bending and a perhaps be a bit concerned like I was when you see the plastic looking so unnaturally moved about. Thanks for the video👍🏼
I cleaned my xbox and its 2021. it was my first time cleaning my xbox since i got it and all i can say is there was 8 years worth of dust in the vents and all holes. I was pretty shocked and i just finished cleaning it and now it doesnt sound like its about to take off everytime i play something thanks man!
@@JoeyDoesTech yeah no problem! Everything is well explained and warnings (I would’ve pulled the ribbon cable off) are well put out. Keep up the good work man!
Watched the video, opened up my Xbox and put it back together and… It worked! My Xbox is silent now :) thanks for the informative video! And to anybody reading this definitely watch the iFIXit video on how to put the top back on, it makes it a lot easier.
This video was a life saver omg. I followed a different video to clean it but they didn't show putting it back together. I didn't think it'd be that hard, just everything backwards, until I couldn't for the life of me clip the top piece back on. I was convinced I messed something up until this vid showing the clip on the corner and how difficult it is
By some miracle it fit together so well I was confused that anyone would have difficulty. Unfortunately it didn't solve my particular issue but the cleaning was fun enough. Had to restrain myself from cleaning my brother's right away and will do so tomorrow. Probably with the aid of this very video! Great job on the video and I hope you have a lovely day.
I was so scared to open this one! I already scratched it from the video before which is why it was a bit easier to do it this time round. All I can say is just make sure you watch enough videos until you feel confident enough to do it :) For me I didn't play my Xbox One that much so it wasn't a huge deal to me, but can see why it would be such a big deal to someone who plays on it a lot! Best of luck, let me know how it goes when you get round to it :) Thanks for watching!
Just cleaned mine for the first time, thanks to your video! I've had it for 10years! 10 years of dust! Gave it a very thorough clean! Hopefully it still works 👀
Hint: if you put a little bit of rubbing alcohol over the sticker you can use a knife to pull it up the warranty will be void but you get to keep the sticker on the xbox
I got it first try, I figured out for the ribbon part you can take apart the front piece from the top piece. Then you can just put the top on and the ribbon part is then only attached to the small piece. It makes everything so much easier in the end.😊
My xbox refused to play any disc, this helped me so much to clean it for the first time since 2016 when I bought it. After the clean it is working 100% again. Thank you so much.
How refreshing, second video on how to clean an xbox and both were Brits! Don't have a 17 year old yank telling me to smash the subscribe button, many thanks bud
Thanks Joey, I cleaned my Xbox one after 10 years with the help of ur video…😊. But i missed one of the screw to put back in the Xbox and I noticed it after fixing everything😂.
@@wowzeree6789 oh mine overheated n turned off n won't come back on... I just bought a used series x for 570$ bcuz I couldnt fix xbox 1 even tho I followed this tutorial oh well thats thuh way she goes
putting the final main case piece back on is easy if you put the case vertical on with the front facing down and let gravity help you force it in and you can push down from the back. takes just a few seconds to get it in.
Heres a little tip for putting back the final case of the console: Remove the clips on the top of the case and put on the upper part on the Xbox first. Then you can connect the blue cable thing much easier and put it back together.
Absolutely helpful video man! Tip for putting the shell back on is removing the front cover from the shell. Place the front plate down first in position then attach the back portion of the shell followed by attaching shell to the front plate. Way easier that way! Thanks for the guide!
It was so cool to take apart my console and it got a much needed cleaning. Unfortunately now my power button does not work but that’s what a controller is for 🤙. Thank you for the awesome guide!
Thank you so much. Had taken xbox apart and cleaned and put back together and power and sync button wouldnt work. Had the blue ribbon wire on backwards. Really helped out. Thanks
It's one of the hardest parts. You won't need to put TOO much force as most of it is technique. You want to try your best to push the case up and over rather than just straight force. Does that make sense? Let me know how you get on!
@@JoeyDoesTech it did indeed :) since I have you, do you perhaps have advice or videos on mounting said Xbox to the TV bracket? The bracket is rated to 40kg, total would be 16.5 (half). I want it as close to the TV as possible, I know unusual and such lol :)
For people who are struggling to put the top shell back on at the end, please click on this video and skip to around the 5 minute mark. Sorry that my explanation/example wasn't that good, I'll work on this next time! 😁😁 (PLEASE LIKE THIS COMMENT SO PEOPLE CAN SEE) ruclips.net/video/VjDZMyqMDAU/видео.html
When you put your Xbox back together, and you have the black plate to put on the Xbox or the shell, you can separate it into two pieces by looking at the black plates inside where the blue ribbon is, and there are these little latches that you can take off which allows you to separate the front of the black plate and the top of the black plate which allows you to put the top on first and on the front on last which makes it 10 times easier putting the blue ribbon on and putting it back together hope this helps.
Tip from JoshFi like a 1 year ago "IF YOU'RE HAVING TROUBLE PUTTING THE TOP BACK ON: take the front panel (the one with disk and power buttons) off from the top panel (one with the vent for the fan.) Put on the small front panel on FIRST and THEN put on the larger top panel. It may take some wiggling but it is FAR easier than just putting the whole thing on normally. HOPE THIS HELPED"
Thank you. This comment really helped cause trying to put the whole thing on at the same time was very frustrating and this helped me not wanna throw my console. Had been fighting with it for an hour before reading this.
Heyyy thanks soo much mann!! Btw one tip, there are 4 clips on the cooling fan 2 on each side, they are rather easy to take off and once it's off it's wayyyy easier and wayy more efficient to clean the radiator.
Thank you for this! Got my son some new sonic games for his birthday to come and find out the disc reader hadnt been working, after some digging around in the console i found a spider man kids magnet lodged up inside and was able to remove and fix the xbox entirely, as well as give it a nice clean up to make it good as new!
This helped me a lot but putting on the final shell took an hour cause it was being so stubborn. I don’t think I’ll forget how happy I was when I got it over and heard it clip
10:05 what i did to get it back on easy was to snap off the FIRST plastic alignment tab on the upper left side of system going by how you have it in the video. 9:54 on this side here. once that was gone i was able to get it on waaaaaaaay to easy. The Ribbon cable in the front that controls the sync and power is the most problem.
Just used your video to clean my Xbox One for the first time, never did it before and it is about as old as when it came out! I even got the case to snap on perfectly first try. : D Thank you for making the video, the few others I found were a bit hard to follow to be honest, I can see why this is your most popular video! (I think? I'm not good with tech, or RUclips, or the internet in general... haha)
I got up the mother board part since I didnt have the screw... so I had to put everything back on and the ribbon I got to say was the hardest for me but I will for sure use this video in the future when I got the right sized screw
Did you manage to give it a bit of a clean getting up to the motherboard part? If so good job :) Thanks for watching and good luck when you attempt it again!
"Let me know if you get it the first time..." - thought to myself how hard could it be, turns out 30 minutes later when it finally popped in place that was the most satisfying and scary case to anything I've ever closed. So many emotions... 🤣🤣🤣
this video shows you how to almost break your case. Take the front cover off first. You should never have to force a part the way he does. Skips a 10 second step to cause potential breaks. Just take the front cover off next time
@@darsinge3612 are you talking about putting the case back together afterwards? If so theres a comment with a much better video explaining how to do it that I've linked
Hey so at the end I was able to easily put it back together the first time. After some examination I found out that the top part of the Xbox and the front part with the power button come apart. So when I took it apart (which also made reconnecting the power button cable alot easier) Viola the top part snapped right back on. Easy peasy. I am surprised that my Xbox hasn't caught fire with how filthy it was lol!
After removing the top, unclip the front from the top, which will also make removing and re-installing the ribbon easier, then put the top on, lock it into place, then you kind of roll the front piece onto the bottom, and ensure the top clips are going underneath the top part and click it into place.
I have never cleaned it and I'm now scared to but I'm hoping if I get the courage to it will make it download stuff faster but idk, might bring it to a professional since I don't think I have those screw drivers
For those of u struggling to get the case back on, unclip the front panel and re clip it once the ribbon cable is back in place - this vid glosses over that part but its very hard to do it the way this vid tells u to! Spent about an hour trying to get it on the way this vid tells u to and the other method took literally 10 seconds 🤣 Hope this helps :)
I wish I had read this in time. The previous owner of mine had broken all of the upper front clips and i hadnt noticed until i was about to put it back on. I just spent a couple hours trying to carefully do it the same way he did in the video and the clips kept just shattering one at a time.
Thank you very much Joey for yr great talk through on this.. When I put the case back together 1st time I made sure all other cables were connected well except for the fan, mainly forgot to check as it's under the hard drive. I had taken case apart 3 times now. I found taking off the front part of case easier to re connect the ribbon back, as I clip the front panel into both bottom and top last thing.. I did break one clip on the front right side.., it makes it easier to close now👍👍👏
I just tried this and hands down everything went smoothly. Thanks for the great video and i got the top case back on the first time. Im a automotive technician so that kind of helped make this easy for me had it done in less than a hour.
Jesus, you smashed it! Good stuff pal, feel like I could of gone into more detail about putting the top case back on, as it's quite difficult especially for people like myself who don't have the experience. Oh well we learn! Thankyou for the kind words :)
@@elias2444 how bad is the rip if the only part that ripped was the blueish ribbon that went around the outside you could still make it work as long as the piece that goes connected isnt ripped. Just have the console facing up and make sure to push in the blue ribbon tab and once u see it in push in the small tab in you can use a really small flat head screwdriver to push in the tab
it is necessary to disassemble it only if there is overheating and the fan makes a loud noise, but in this case it is also advisable to replace the thermal paste, for many owners of the original xbox one for 7-8 years their consoles both worked quietly and will continue to work.
Thank you! Putting it back together was a real pain but I took a lunch break and it worked after that. Building a custom PC is much easier, those damn clips are a huge pain in the.. Anyways thank you for this awesome tutorial
Thank you for showing how to put the cover back on! I watched someone else’s video showing how to get into it but they didn’t show putting it back on… was about to lose my sh#*. Can’t believe how hard I had to push to get that side front clip in
I found an easier way to reassemble the top. detach the top from the front then attach the front to the console then line up the top onto the console and it slides on to the console so much easier. one try.
Haven't cleaned my Xbox since I bought it the wireless controller kept disconnecting sooo I followed your instructions and everything went smooth control hasn't disconnected since the cleaning thanks for the guide A+++
Video was helpful thank you! That corner when getting back on was B but this video help took me about 3 tries. Thank you for making this helpful video.
This video will show you how to put the top case and ribbon on easier - ruclips.net/user/shortsIENazKAj5mM?feature=share 😊👍
If you do break that little wire you said at the beginning can you get it fixed
@@Cmrice-qe9oq yes there are replacements you can find online, funny enough I just broke my ribbon too
Thank you for this 2nd little video even though I caught it after fighting with it the other way. I couldn’t fit my big hands so I got my wife to help me with her little hands. But now I’ll know for the next time. Lol
@@robertw31968 haha you're welcome dude. No worries at all :)
@@JoeyDoesTech hey mate for the cover disconnection of the xbox one can I do it with a thin knife or not before I start cleaning it up? Or can I able to use a plastic spatula if possible?
And this is why I love RUclips. People like you making videos like this makes things possible for the average people like me and so many others able to do things like this on our own. The only problem I struggled with, was that alignment in that first corner when putting the lid back on. Man, that was a struggle for me. Lol everything else went smooth. Thanks again.
Yeah only took me 10mins of doing it wrong then got it straight away afterwards
This helped so much I haven’t cleaned my Xbox in 6 years
Glad I could help :)
Me to XD
Now my Xbox it broken 😔
@@vorce_ios8833 damn you did it wrong 😐
@@vorce_ios8833 Did you feel like you done something wrong at any part? Slowly go back through the process and be extra careful :)
dude you were so right about that final case and that clip on the corner omg almost regretted d whole process because of it
It's horrendous right Steely? Great satisfaction after doing it though. Well in mate for getting it done :) 👌
The best way to do it is to insert at like a 45 degree angle to put all the hinges together and then force it in on the right side opposite of the side you took the plastic cover off and it should just sit in place in the back hinges very easily. Took me a while too😂but finally figured it out
Gonna sell me broken xbox I have to keep resetting it. The thing is I have it on with music Just so I can sleep with the loons around me. I might try take apart or just sell to a store who can always fix it
Im doing this simply cause I think the first time I didn't get it set back properly and the case was blocking the disk drive
@@rickybobbyjr581d2 if the vid helped drop a like cuz it sure did for me, my system kept shutting down because it was protecting itself from overheating and it had good reason to, all the vents were clogged with dirt to the point where I could just tear like a banana peel
I feel like the "annoying part" should have had a lot more attention/detail to it
You're 100% right Hypno, and I'm sorry I didn't detail it enough. The blue ribbon cable should of had better angles, as well as putting the case back on. There is a pinned comment on this video of how to put the case back on ALOT easier than the way I've explained.
Hope the rest of it wasn't too bad! I have learned 😁😁
Hear hear, it was exactly as he said though (you'll have to give it a couple of goes before getting here right). I was losing my cool 🤦🏻♂️
I think I broke it
when you put it back together, its actually WAAAAY easier if you separate the front and top cover, connect the top first, then the front
Thanks man, can’t express how much easier that was with your advice
how are u supposed to do this
@@bryanbejerano3799 there are little locks holding the front and top cover together, just pop it and separate them
🐐
Man, I was struggling for half an hour until I thought about checking the coms. Followed your tip and it didn't even take me a minute. Thank you very much!
I almost got the top completely off & I got scared & put it back together , lol. I don’t wanna ruin it or my boyfriends gonna kill meeee 😭😭😭
Did you manage to get it sorted? 😁
If you haven’t done it I’d try it. He’d love it if you did it right
@@ajr9756 I’m struggling to even put the ribbon cable back together
@@oli2splashy I took mine apart again made sure the ribbon cable and other cables were attached properly and the eject button is working correctly now. Keep at it you'll get it, putting the case back together was annoying too so you have that to look forward to lol
Are you the viral TikTok? Of it
First time I’m internally cleaning my Xbox since 2013 (it’s been 10 years as of now 😅). Thank you for this straight to the point guide!
Same dude bout made a whole dog with all the dust
Lol same here 😂 so glad it still works
Mine went smoothly. Very insightful and no complications other than that one corner clip was indeed tricky to get in place. Over all I like how quickly and easily your video walked me through. Nothing more annoying than a 30 minute video on something that can be done in about 5/10 minutes tops.
Good job man. Glad you found the video helpful 😁
That corner clip will be the end of me.
I cut off the clip I couldn’t take it :vvvvvv
Well the coner clip has now made me have no xbox
Just finished putting my Xbox back together. That one clip was a huge pain in the butt but it's done.
Good job man 😎
How did u do it i cant
@@carminenicholles1762 same
@@carminenicholles1762 did u do it tho
@@minutes-vv3ov lol
The amount of stress I got from doing this, but still managed to do it all because of ur amazing tutorial. Makes me want to give u the biggest hug. Thank you so much!!!!
Ah that makes me smile Patrick! Glad it made sense and great job on doing it :)
If anyone has issues with disc's not going in or ejecting, even after using the manual eject button, I had those exact issues. I took the Xbox apart and pulled the disc drive out, pulled the cover off the disc drive and found that the pulley system that actually turns to pull the disc in was loose. The belt on one of the pulleys was loose and I realized the pulley itself had popped out of its proper location. I pushed it back in place with a flat head, the belt tightened and I reassembled the Xbox, and now the disc drive works fine.
Thanks for sharing your experience Graham, hopefully that helps other people :)
FYI, The front side can be removed easily from the inside after you detach the rear and top panel before u remove the ribbon so you can easily clip it back on when you reassemble it without the hassle .
Certified legend.
Show instead of tell homie or say nothing at all.
This helped so much wow thank you!
You lift up all of the upper, thin things and then you can push the lower thick things out and then the front can come right off.
Totally removes the rage from this entire thing.
@@thehuntressdanni2972 much easier than the way joey explained it
For anyone who doesn't have a proper prying tool....
Here's some potential alternatives that you might have laying around your house that can also likely do the job.
A fingernail kit: the metal tool that cleans underneath your nails.
The spatula from a Cricut tool set.
***(So long as you make sure that it doesn't bend or damage the spatula when prying as it is only intended to lift lightweight vinyl and cardstock.
Not gaming console parts lol)***
A flat part of a metal hairclip
The top metal piece on nail clippers that flips around. (So long as it's thin enough to get in between the pieces)
A thin butter knife.
For the makeup people...
If you've got a tarte lash applicator tool, or similar, this will possibly do the trick.
Just be careful you don't scratch the finish on your lash applicator in the process.
A sturdy set of brow tweezers might work, too.
Great comment, thankyou.
Thank you so much, cleaned my partners Xbox that hasn’t been cleaned in 8 years… safe to say it needed it. Putting the lid back on almost defeated me but I got there in the end. The click when it goes back on is SOMETHING ELSE😂
bro putting the final case on was so tedious. i was beginning to think that i’d have to go without a case 🤣. i was so glad when i got it back on and the click was so satisfying. cheers man for the guide though 👍
You're welcome Noah! Thanks for watching :)
Had no idea about that clip on the corner. I watched so many other videos and no one explained that. Thanks man. Life savor.
You're more than welcome :)
Thank you so much! I just successfully cleaned out my Xbox one original and you’re right the hardest part was aligning and snapping the plastic back together but after I realized you had the same issue I figured it out. Thank you again runs smooth and clean again 🧑🔧👍
You're welcome :)
Bro I can’t get the triangle shape thing from 2:20 the time in the video to move bro having a hard time
When putting Xbox back together an easier way to do it is that there are clips at top front of case you can separate the case into 2 pieces should make it easy to connect.
Me: peacefuly cleaning my xbox and putting in the screws
*Putting on the case*
Me: why do I hear boss music?
🤣🤣🤣
I don't get it
@@FIREB4II it's very difficult to put the case back on
Great guide! So, I know you asked to post about this in the comments.... So, I found a much easier way to attach the top cover during the final reassembly. I removed the face plate from the top cover. This made it so much easier to attach the ribbon cable. I attached the face plate to the console, pulled the face plate away just a bit and attached the top cover to the face plate and worked from front to back of the console. Much easier. Anyways, great video!! Hope this helps!
THIS. DO THIS!
Thanks man! had it since she came out back in 2013 fit for it’s first clean
Glad I could help Brendon :)
Hardest part was putting the top lid back on took me bout 30 mins smh
Agreed 100%. Did you follow the top comment here?
yeah I accidentally put the back on first and now I'm stuck 😭
If you’re having trouble putting the shell back on watch the short in his pinned comment. I almost broke my xbox because the way he showed us in the original video is 40x harder.
Also thank you for the video, as long as you make your way to the short it’s an amazing explanation.
Thanks Garrett :) it’s a shame I found it out after the video otherwise this video would have been fine 😂
Thanks man, almost did the same that was terrible
When your putting the final shell on there’s a much easier way if you look under the top shell there’s a bunch clips holding the top and front shell together. Unclip tham and the front should come free from the top then put the front shell on first and the top second. Hope this helps
There's alot of people commentating this, and I might just need to upload a clip of me trying it as it seems REALLY useful! Thankyou for the heads up :)
Yoooooo dude your a freakinnnn life saver I spent like 1 hour and a half trying to get it on and looked in the comments and saw this thanksssss so muchhh bro
@@nickmacphee9542 hes the MVP
Bro😭😭😭 I love you, I wanna hug you rn, thank you!
Thank you so much for posting this comment. Was struggling for a good 10 mins then seen what you said and had it put on in less than one minute. Thank you!
Thanks for the video. I was unable to get the shell back on perfect. Then again, this wasn't a professional job where presentation matters. As long as it's clean and snap on well enough. My original Xbox Day One thanks you! 8 years now, and finally clean.
When its gets to about a about a 45 degree angle, pull it slightly towards the back, slowly and firmly. Its going over something in the corner he mentions.The whole things just suddenly sits right.you will see bending and a perhaps be a bit concerned like I was when you see the plastic looking so unnaturally moved about. Thanks for the video👍🏼
This fucking comment right here. Life and time saver. I was struggling so much
I cleaned my xbox and its 2021. it was my first time cleaning my xbox since i got it and all i can say is there was 8 years worth of dust in the vents and all holes. I was pretty shocked and i just finished cleaning it and now it doesnt sound like its about to take off everytime i play something thanks man!
You are more than welcome Shibe! Thankyou for trusting the video 😁😁
@@JoeyDoesTech yeah no problem! Everything is well explained and warnings (I would’ve pulled the ribbon cable off) are well put out. Keep up the good work man!
@@ghostlyshiba8944 Thankyou! I appreciate the kind words :)
Thank you so much, my xbox had been shutting off recently and I didnt know if it was the power supply or if there was dust. Helped out a lot 🙏🏽💙
You are more than welcome. Thankyou for choosing to watching my video 😁😁😘😘
I was pretty nervous to even take the thing apart. But your video made a huge difference! Thank you, sir.
Watched the video, opened up my Xbox and put it back together and… It worked! My Xbox is silent now :) thanks for the informative video! And to anybody reading this definitely watch the iFIXit video on how to put the top back on, it makes it a lot easier.
Thankyou for choosing to watch the video Lawlar! Good job :)
This video was a life saver omg. I followed a different video to clean it but they didn't show putting it back together. I didn't think it'd be that hard, just everything backwards, until I couldn't for the life of me clip the top piece back on. I was convinced I messed something up until this vid showing the clip on the corner and how difficult it is
Glad it helped :)
By some miracle it fit together so well I was confused that anyone would have difficulty. Unfortunately it didn't solve my particular issue but the cleaning was fun enough. Had to restrain myself from cleaning my brother's right away and will do so tomorrow. Probably with the aid of this very video! Great job on the video and I hope you have a lovely day.
Aye thankyou so much! Really appreciate the kind words. At least like you said, you now get practice doing it.
I’m scared to clean mine
I was so scared to open this one! I already scratched it from the video before which is why it was a bit easier to do it this time round. All I can say is just make sure you watch enough videos until you feel confident enough to do it :)
For me I didn't play my Xbox One that much so it wasn't a huge deal to me, but can see why it would be such a big deal to someone who plays on it a lot! Best of luck, let me know how it goes when you get round to it :)
Thanks for watching!
Nice photo lol
Same cause I don’t wanna break my xbox
Just cleaned mine for the first time, thanks to your video! I've had it for 10years! 10 years of dust!
Gave it a very thorough clean! Hopefully it still works 👀
Hint: if you put a little bit of rubbing alcohol over the sticker you can use a knife to pull it up the warranty will be void but you get to keep the sticker on the xbox
I got it first try, I figured out for the ribbon part you can take apart the front piece from the top piece. Then you can just put the top on and the ribbon part is then only attached to the small piece. It makes everything so much easier in the end.😊
LIFESAVER
I actually got this all on my first try! Took an hour and a half to finish but we did it! Thank you so much for this video, bless🙏
Yooo good job my guy. Thankyou for the kind words 👌👌
On the last piece take the front piece apart from the top piece and put the top piece on first then put the front piece back on the top piece
Thank YOU. Was definitely intimidated at first but your video really helped make it simple.
You're welcome 😁
My xbox refused to play any disc, this helped me so much to clean it for the first time since 2016 when I bought it. After the clean it is working 100% again. Thank you so much.
How refreshing, second video on how to clean an xbox and both were Brits! Don't have a 17 year old yank telling me to smash the subscribe button, many thanks bud
Thankyou for watching dude :) Hopefully it went okay! 👌😃
Thanks Joey, I cleaned my Xbox one after 10 years with the help of ur video…😊. But i missed one of the screw to put back in the Xbox and I noticed it after fixing everything😂.
The scariest part for me was the ribbon cable, but ty it’s working fine
Was ur xbox not working at all?? Or u just cleaned it for fun??
@@yOGlo Mine was functional, but it was loud, stuttered ALOT, and it was just kind of starting to show its age.
@@wowzeree6789 oh mine overheated n turned off n won't come back on... I just bought a used series x for 570$ bcuz I couldnt fix xbox 1 even tho I followed this tutorial oh well thats thuh way she goes
putting the final main case piece back on is easy if you put the case vertical on with the front facing down and let gravity help you force it in and you can push down from the back. takes just a few seconds to get it in.
Heres a little tip for putting back the final case of the console: Remove the clips on the top of the case and put on the upper part on the Xbox first.
Then you can connect the blue cable thing much easier and put it back together.
Agreed :)
Im so pissed i didny see this earlier omfg i just spent 30 minutes doing that fucking stupid ribbon and prob broke ot
Thank you so much that was the easiest repair video I have ever seen and I did it perfectly the first time
You're more than welcome :)
Haven’t cleaned this in 7 years ! It’s crazy to think about but I’m about to clean it out
How did it go David?
Does it work better
Absolutely helpful video man! Tip for putting the shell back on is removing the front cover from the shell. Place the front plate down first in position then attach the back portion of the shell followed by attaching shell to the front plate. Way easier that way! Thanks for the guide!
bless u in everyway
You’re a lifesaver. I took like an hour trying to figure out how to push the shell back on but this method is way easier. Thank you.
It was so cool to take apart my console and it got a much needed cleaning. Unfortunately now my power button does not work but that’s what a controller is for 🤙.
Thank you for the awesome guide!
I love your optimism Griffin! Great job in getting it cleaned. Glad I could help (Sorry about the ribbon!)
I’ve had my Xbox since I was 14 or so I’m 21 now this is the first time I cleaned my Xbox and this helped so much
Good to hear pal :)
Tools I Used in This Video 😁:
Screwdriver Set: amzn.to/30vwPxI
Prying Tool: amzn.to/3pbrfdK
Can of Air: amzn.to/3EfR8gR
Thank you so much. Had taken xbox apart and cleaned and put back together and power and sync button wouldnt work. Had the blue ribbon wire on backwards. Really helped out. Thanks
No worries, you're welcome :)
How much force do you need to close the part where you need to clip over the vent bcs I've been trying for quite a bit and bothing
It's one of the hardest parts. You won't need to put TOO much force as most of it is technique. You want to try your best to push the case up and over rather than just straight force. Does that make sense? Let me know how you get on!
push on it at a angle
I legit got so mad that it wasn’t going on so I just punched it and it clicked on😂
thank you so damn much, i've never cleaned my xbox before and i've had it for 5-6 years, i really appreciate the help
You are more than welcome, thankyou for leaving a comment it means a lot 😁😁
Good show, got it back together with a bit of finagling on the 1st shot!
Good stuff Brandon :)
This helped a ton mate thanks. I thought I did it first time just now but no, it is a headache reconnecting the top housing haha
You're more than welcome my guy. Glad it helped :)
@@JoeyDoesTech it did indeed :) since I have you, do you perhaps have advice or videos on mounting said Xbox to the TV bracket? The bracket is rated to 40kg, total would be 16.5 (half). I want it as close to the TV as possible, I know unusual and such lol :)
For people who are struggling to put the top shell back on at the end, please click on this video and skip to around the 5 minute mark. Sorry that my explanation/example wasn't that good, I'll work on this next time! 😁😁 (PLEASE LIKE THIS COMMENT SO PEOPLE CAN SEE)
ruclips.net/video/VjDZMyqMDAU/видео.html
I’m currently doing it, I got a headache, i have been thinking of throwing the fuc.... Xbox out of the window and switch to PlayStation😂
@@Stalyn_IN Hahahaha I know the pain don't worry! Just keep persistent, and it feels really good after you've done it :)
How can you do I’ve been trying for 20 minutes uhhh
@@lazywolf3002 Watch the video in the link :)
@@JoeyDoesTech which link?
When you put your Xbox back together, and you have the black plate to put on the Xbox or the shell, you can separate it into two pieces by looking at the black plates inside where the blue ribbon is, and there are these little latches that you can take off which allows you to separate the front of the black plate and the top of the black plate which allows you to put the top on first and on the front on last which makes it 10 times easier putting the blue ribbon on and putting it back together hope this helps.
I love u dude u save me
Tip from JoshFi like a 1 year ago
"IF YOU'RE HAVING TROUBLE PUTTING THE TOP BACK ON:
take the front panel (the one with disk and power buttons) off from the top panel (one with the vent for the fan.) Put on the small front panel on FIRST and THEN put on the larger top panel. It may take some wiggling but it is FAR easier than just putting the whole thing on normally. HOPE THIS HELPED"
There’s a video in the description for this :)
Thank you. This comment really helped cause trying to put the whole thing on at the same time was very frustrating and this helped me not wanna throw my console. Had been fighting with it for an hour before reading this.
Heyyy thanks soo much mann!! Btw one tip, there are 4 clips on the cooling fan 2 on each side, they are rather easy to take off and once it's off it's wayyyy easier and wayy more efficient to clean the radiator.
Legend thankyou for the tip! Glad this helped you 😁
Gonna be honest I palmed my Xbox to close it more times than I would have liked to
Thank you for this! Got my son some new sonic games for his birthday to come and find out the disc reader hadnt been working, after some digging around in the console i found a spider man kids magnet lodged up inside and was able to remove and fix the xbox entirely, as well as give it a nice clean up to make it good as new!
For those struggling to put the top case back, just remove the front case and put it first after that put the top panel, easy peasy😎
Facts :) There is a link in the top comment showing this as well :) Thanks!
Thanks!
This helped me a lot but putting on the final shell took an hour cause it was being so stubborn. I don’t think I’ll forget how happy I was when I got it over and heard it clip
He threw fifa!!! Lol good job
10:05 what i did to get it back on easy was to snap off the FIRST plastic alignment tab on the upper left side of system going by how you have it in the video. 9:54 on this side here. once that was gone i was able to get it on waaaaaaaay to easy. The Ribbon cable in the front that controls the sync and power is the most problem.
Thank you so much ive never cleaned it and u explained it really well
Glad I could I help! Thankyou for the feedback :)
Do you own a PS4 and would you like to see one for that? :)
Just used your video to clean my Xbox One for the first time, never did it before and it is about as old as when it came out! I even got the case to snap on perfectly first try. : D
Thank you for making the video, the few others I found were a bit hard to follow to be honest, I can see why this is your most popular video! (I think? I'm not good with tech, or RUclips, or the internet in general... haha)
I got up the mother board part since I didnt have the screw... so I had to put everything back on and the ribbon I got to say was the hardest for me but I will for sure use this video in the future when I got the right sized screw
Did you manage to give it a bit of a clean getting up to the motherboard part? If so good job :)
Thanks for watching and good luck when you attempt it again!
@@JoeyDoesTech Sadly no since i still dont have the screw but im looking into it. Sorry for the really late response
@@JoeyDoesTech I told myself ill just wait till i have the right sized screw driver
Helped tremendously compared to other videos but had to watch another video for the ribbon cable to see it
Yeah if I had a chance to re do this I would of included better angles of both the ribbon cable at the front, and the clips at the end. Thankyou :)
It's easier to just separate the top and front panel than to try and put the whole thing back on together. Got it on the first try that way.
Dude I love you. I was about to break stuff.
Omg thank you so much I was getting really worked up about it. Thx
This help so much thank you my Xbox looks new and I got this Xbox back in 2016
Glad it helped :)
"Let me know if you get it the first time..." - thought to myself how hard could it be, turns out 30 minutes later when it finally popped in place that was the most satisfying and scary case to anything I've ever closed. So many emotions... 🤣🤣🤣
Ayeee good job though! Happy you got it cleaned 😁
this video shows you how to almost break your case. Take the front cover off first. You should never have to force a part the way he does. Skips a 10 second step to cause potential breaks. Just take the front cover off next time
@@darsinge3612 are you talking about putting the case back together afterwards? If so theres a comment with a much better video explaining how to do it that I've linked
Does it clean the disc receiver as well?
Thanks for this, a really helpful, straightforward, no waffle tutorial, nice one.
Thanks, this really helped, it was my first time ever cleaning a console. Can you do an Xbox 360 cleaning as well, please
More than happy to help :) I don't own a 360 currently, but I might buy one :D
Hey so at the end I was able to easily put it back together the first time. After some examination I found out that the top part of the Xbox and the front part with the power button come apart. So when I took it apart (which also made reconnecting the power button cable alot easier) Viola the top part snapped right back on. Easy peasy. I am surprised that my Xbox hasn't caught fire with how filthy it was lol!
Good job man! Is it the first time you've ever taken a console apart? Sounds like it went alright :D
This is a great help but it seems like Microsoft has gone a long way to my cleaning the Xbox harder.
After removing the top, unclip the front from the top, which will also make removing and re-installing the ribbon easier, then put the top on, lock it into place, then you kind of roll the front piece onto the bottom, and ensure the top clips are going underneath the top part and click it into place.
I have never cleaned it and I'm now scared to but I'm hoping if I get the courage to it will make it download stuff faster but idk, might bring it to a professional since I don't think I have those screw drivers
It's better to be safe than sorry Rizzo. If you're not confident in doing it, I would leave it to a professional.
For those of u struggling to get the case back on, unclip the front panel and re clip it once the ribbon cable is back in place - this vid glosses over that part but its very hard to do it the way this vid tells u to! Spent about an hour trying to get it on the way this vid tells u to and the other method took literally 10 seconds 🤣 Hope this helps :)
I wish I had read this in time. The previous owner of mine had broken all of the upper front clips and i hadnt noticed until i was about to put it back on.
I just spent a couple hours trying to carefully do it the same way he did in the video and the clips kept just shattering one at a time.
For the love of god thank youuuuuuuuu
@@JDM4TW i spent way too long trying to do it the way this vid says to, glad my comment helped ahahahaha
Thank you very much Joey for yr great talk through on this.. When I put the case back together 1st time I made sure all other cables were connected well except for the fan, mainly forgot to check as it's under the hard drive. I had taken case apart 3 times now. I found taking off the front part of case easier to re connect the ribbon back, as I clip the front panel into both bottom and top last thing.. I did break one clip on the front right side.., it makes it easier to close now👍👍👏
Ayee glad you got it sorted Michael. Thanks for watching :)
I just tried this and hands down everything went smoothly. Thanks for the great video and i got the top case back on the first time. Im a automotive technician so that kind of helped make this easy for me had it done in less than a hour.
Jesus, you smashed it! Good stuff pal, feel like I could of gone into more detail about putting the top case back on, as it's quite difficult especially for people like myself who don't have the experience. Oh well we learn!
Thankyou for the kind words :)
Pls help me at 9:23 i cant put it back its so hörs how do i do it
@@JoeyDoesTech i kinda ripped it off Will the Xbox not function of i ripped the blue part 9:23 off.
@@elias2444 how bad is the rip if the only part that ripped was the blueish ribbon that went around the outside you could still make it work as long as the piece that goes connected isnt ripped. Just have the console facing up and make sure to push in the blue ribbon tab and once u see it in push in the small tab in you can use a really small flat head screwdriver to push in the tab
@@ej1jayk ok and Will it affect anything in my console
Step one: buy gloves
it is necessary to disassemble it only if there is overheating and the fan makes a loud noise, but in this case it is also advisable to replace the thermal paste, for many owners of the original xbox one for 7-8 years their consoles both worked quietly and will continue to work.
Thank you! Putting it back together was a real pain but I took a lunch break and it worked after that. Building a custom PC is much easier, those damn clips are a huge pain in the.. Anyways thank you for this awesome tutorial
No worries dude! Thankyou for choosing to watch it :)
Yeah taking a break is exactly what I done...
Finally got to clean my xbox after having it for almost 10 years. Nailed putting the puzzle back together.
Great job :)
geez i feel the last clip was the hardest, getting the top back on took me like 15 tries tho
Ayee you done it though :D
Great vid! But I unfortunately broke the blue chord at the front but I cleaned it and it still works. THANK GOD
Thankyou :) glad it still works!
Thank you for showing how to put the cover back on! I watched someone else’s video showing how to get into it but they didn’t show putting it back on… was about to lose my sh#*. Can’t believe how hard I had to push to get that side front clip in
I found an easier way to reassemble the top. detach the top from the front then attach the front to the console then line up the top onto the console and it slides on to the console so much easier. one try.
Thank you so much me and my dad were having so much trouble and I found your comment and did it easily 😊
Would suggest taking the front piece that the power button is on off of the rest of the shell when reassembling so much easier
Omgf it was so hard to put the case part back on I thought I was going to have to give up lol
I was also on the verge of giving up! It was literally the last couple minutes when I managed to get it back together 😂
@@JoeyDoesTech timecode?
Haven't cleaned my Xbox since I bought it the wireless controller kept disconnecting sooo I followed your instructions and everything went smooth control hasn't disconnected since the cleaning thanks for the guide A+++
You're more than welcome :) Glad it helped!
I can’t get the corner of the Xbox on 9:55
Check the top comment pal
Very helpful, and I'm glad I watched your video before I broke something! Thanks!
You're welcome :)
i need oppen him , but i dont know ...i dont need broken him😪😂
thank you for video dude 💕😘
Did you manage to give it a good clean? :)
Video was helpful thank you! That corner when getting back on was B but this video help took me about 3 tries. Thank you for making this helpful video.
You're welcome :) There was an easier method in the top comment, maybe I should do an updated guide on this!
Well Made video! 👍 and very in depht too
Thanks Bart :D
Joey Does Tech no problem
Thank you so much for video! It helped me so much. Plus your right putting the cover back on was a bit nerve racking lol!!!
You're very welcome :) Yeah the back cover is a pain...