Washing a 60v Toro SR: I don’t use a pressure washer and I do this once a month to avoid stubborn build up. 1) Rinse with hose 2) Spray with cleaner - I use simple green 3) Clean with dishwasher brush and plastic putty knife 4) Rinse with hose. Do this in smart stow position. 5) Run the mower blade for a few minutes to dry deck. 6) Leaf blower for top of mower
I never did undercarriage maintenance to my mower, and the deck just rusted apart. The mower still worked great, but it was only 5 years old. I found a replacement deck, and stripped all the parts off the rusted deck, and basically rebuilt the mower. Now with watching your videos I am able to clean my mower properly! I also have an old tire brush that I use to clean out the deck after using a hose to it. Once I clean it I let it dry, and every fourth use I apply silicone spray to the deck. I think that helps keep grass from sticking, but it cant hurt. I also remove the spark plug wire, as I learned that as a kid so I don't accidentally cause the mower to spin on.
Your students are lucky to have you as an educator JB. You are incredibly effective at teaching and I see why this is your calling...that and making incredibly helpful and useful videos for your devoted viewers....such as myself. And you ALWAYS make me laugh out loud at some point. That power washer does more than clean vinyl siding after all. It works well on big decks! With thanks always dear friend.. Hit that LIKE button all.
Thanks for the kind words Joe! I enjoy doing what I do! And hopefully can leave teaching one day to do this full time! As always thanks for being a cool fan! You ROCK! 🫵👍
@@GarageGearhi I think I saw a flame coming out of my husqvarna awd lawn mowers muffler when I was trying to start it have any idea on why it happened
Hey JB, great video on how to thoroughly clean a mower deck. Just a quick observation though, like yourself, I've been taught a lot of things from my dad over the years with respect to in and out of the garage, but his first rule of thumb (pardon the pun here) was before putting your hand under a mower deck, or snow blower, was to unplug your spark plug. I've never forgotten this rule, and have all my fingers and toes. Is this an old wives tale that turning the blade could engage a cycle of the engine? Love to hear your feedback on this and as always, great videos. Thanks
Hey Darren! Couple things here. First off I’m damned if I mention it and damned if I don’t. People always have something to say about this. In 25 years of using a mower I never had one start up on me using these methods. I’m also not hitting, twisting, spinning or even touching the blade on purpose to give it any reason to start either. It would also take a lot of revolutions of the blade to start the machine up. A bump here and there on the blade is not going to start it up. Thanks for watching! 👍
Yes, always always always unplug the spark plug. When you're under the deck it's easy enough for you to twist the blade a bit and if it's warm or the piston is in the just the right spot it could start. It's not likely but it's just a precaution you have to take when you're putting your hands inside a machine with a sharp blade that can spin at 3000 RPMs
Most excellent! I’m a small engine mechanic and I wish everyone would follow these steps for the sake of their mowers and for their mechanics when they bring it for maintenance. 😊 Also, If the mower doesn’t have an automatic blade/ engine stop, please disconnect the spark plug wire for safety when your hands goes near the blade…many of my older colleagues have learned this the hard way and now have 3/4 fingers!
For the last twenty five years, ive just taken the mower to end of driveway and shoot a stream of water from the hose up into the mower while it is running. I do it almost everytime. Then hose off the top of the deck and let the mower run for 2-3 min after in the sun to dry. At the end of mowing season it takes about 10 minutes to wipe or scrape what little grass is under the deck.
Hey JB thanks for yet another great video. I watched your reviews on the Toro 21564 and bought one via online order from Home Depot. This is my first Toro and after owning 2 Hondas since 1989 it was a big step for me. (HR 214 and a HRX 0:23 217). Like you I do all of my own maintenance and mechanical work. I am sure glad that I went with the Toro, especially since Honda is pulling out of the residential market. 2 other quick things, I have the same exact power washer and have had it for 7-8 years. The only problem that I had with it was the pump seals gave out and it was leaking bad. I found a video online where a guy had the same exact issue with he replaced the seals and wah lah the issue was fixed. So if yours ever leaks know there is a cheaper way to fix it than replacing the pump assembly. Also noticed you are a Jeep Wrangler man. 👍👍 I have a 2017 75 th anniversary JK and love it. This the 4th Jeep I have owned since 1973. I had a 57 CJ, a 63 CJ, and an 80 Renegade. So after raising the boys and hitting the golden years and retiring I am on my 4th and probably last Jeep. I take very good care of it as I do and have done my entire life. Comes from being raised right and paying for my own stuff forever. Anyway enough rattling. Just wanted to say thanks again for all of your great videos. Keep up the good work my friend.
I picked up the new Toro Recycler. It was the rear wheel drive with a steel deck. I looked around for one with a discharge chute. I guess they have sold out of those in my area. My old lasted six years before the deck cracked in several places with hard use. And I didn’t follow your deck cleaning process. I mowed six yards each week. I did get the discharge chute from Toro, but I’m not sure how it will turn out. I will keep you informed
Great Video, thx for making it. One thing to add here, when you clean the deck with water, if the mower has a side discharge with a spring loaded cover. Make sure to hit that spring assembly with WD-40. I had a small amount of rust on mine.
On a very clean or new mower deck, I spray rubber coating like gravel guard. Helps grass not to stick and deck not rusting. Very good video al always JB
Great tips on mower “deck” cleaning JB! As hard as I’ve tried, I just can’t get that JD X370 tipped on it’s side to clean the deck….😂. It does have the water clean out port but I’ve never used it or ever will. As you mentioned, water and metal don’t mix. Also, I think you should wait until the mower is cooled off a bit after mowing before hitting it with water. IMO. Hey can I borrow your power washer?? Oh….that’s from another video! Hope your enjoying the pool! Cheers buddy!
Hey Jay! Ever think about getting some kind of mow Jack? Lifts it right up from the front so you can get at it. Good tip my friend! You can definitely borrow my power washer! Definitely enjoying the pool! It’s keeping me sane! Lol! Enjoy the rest of the weekend bud. 👍👍
After that '15min drying' just try to restart before putting the mower back into his place , no surprises next time ( possible carb or oil issues) when using it.
Hey JB!! Its great to get people motivated to clean their decks. I always wet the grass under the mower and let it sit for 10 minutes or so. The dried grass comes off so much easier. And I always run the mower for a few minutes after it is wet to dry the bottom and prevent rust. And blow it all off. Any tips on cleaning the catcher mesh? seems no matter what I do the mesh clogs up, Its a small riding mower. Blessings to you and your family, have a Great weekend!! We are in another dry spell here in Cleve.
Hey Ted! Good tip! I usually just pressure wash the lawn mower bag at the end of the season! I usually stand on it with one leg to hold it in place. Gets it pretty clean! Then just let it drip dry in the sun! 👍
I have cheap electric pressure washer for clean around the house but after I mowed, I clean it with it because I storage the mower inside garage. If mower is clean, i don't need to clean the garage more often
Ahh, morning coffee w/ JB, yes, don't forget important 1st step 1) ALWAYS disconnect sparkplug and 2) If you're a seasoned professional you can get two (2) beers consumed in that 15min "drying in the sun" timeline!!
Hey yale! Important safety tip! Thanks for mentioning it! The way this briggs engine is messing with the spark plug could probably cause catastrophic failure lol! Have a good Sunday bud!
I bought a Toro Personal Pace 22 inch Recycler in 2015 and i always tip it on its side and hose it clean. Its still going strong and never had a problem.
Thanks man its heavy grass growth here in ontario Canada, and im cleaning deck almost every cut. The stand up tip is golden thanks. We have all had oil in the air filter not fun. New sub great presentation!
I used to have an old toro with a hose port on the top of the deck. Hook the hose right up to it. That not a thing anymore? Edit: just finished the video and see you mentioned it. In the spring and fall when there’s a LOT of grass, and/or if the clippings are damp and sticking to the deck a lot, the washout port definitely gets a lot. It’ll make your driveway look like to spilled pesto all over it. Definitely up there with your quick rinse method. I’d hose the whole mower off then run it for a minute or two to help it dry. No more of a rust issue than anything else with water.
Great tips and tricks - I really like the good better best concept- for anyone reading this with a Honda HRC216 mower - the manual recommends a plastic scraper for under deck cleaning - I use a plastic car body alignment tool from harbor freight; seems to work pretty well
Make sure you pull the plug wire off before working underneath…if you pull starter cord until it hard it will be TDC (top dead center) eliminating “hydro locking”
As you stated, pulling the engine cord to TDC will prevent hydrolocking, so I also tip the mower on its side with the carb up. I use a plastic scraper rather than metal to minimize paint damage and a plastic sheet rather than cardboard to catch the scraped clippings as it is easier to fold up and dump the grass into a trash can.
After pressure washing I also blow off the top of the mower. But after that I start the mower and engage the blades to further aid the drying process. Wash out ports suck.
Had my super recycler for 22years and it is important to clean off the grass under the deck otherwise it will just leave clumps on the lawn. Also with the very lowest height setting will leave clumps same with the grass being wet. The grass has to be completely dry to benefit the recycling/mulch. Happy mowing season.
Toro's instructions are to run the mower on level pavement while spraying water on the pavement behind the right front wheel. Anyone here ever try that? Personally, I've got the Toro Super Recycler and have been tipping it on it's side setting my multi-spray spray head to 'stream' and carefully spray the bottom with a stream of water. The deck ends up very clean, no water topside, when finished. Takes 5 minutes after every mow.
Americans do go on. I've had my lawnmower for 30 years now (Hyter). I just scrap the junk out once a year/oil change and sharpen blade's and its still going strong.
Thanks to your videos, I just got a Toro Super Recycler 163-cc. This coming weekend Im going to break in the motor and see how it goes. Thanks again really appreciate your info.
I either use a garden hose or pressure washer on both my walk-behind and zero-turn. My neighbor has cleaned his riding mower deck ONCE in 17 years! Hasn’t sharpened his blades either and it shows…the mower leaves long trails of grass on his yard.
I do the powerwash method every year before winter rolls in. After that, I let it dry off and hit any scratches with some black rust-oleum to prevent the deck from rusting out over the winter.
Buying my daughter a mower as she is buying her first house. She's getting a link to this video before the mower arrives JB! Hey how's that Toro - in comparison to the Honda's. I have an old Honda with the nexite deck which has held up great...
Awesome! Which one is she getting? The Toros are junk now a days. You would be better of getting a slider older one that is one good condition. Honda’s are done as of last sept so if you can find a gently used one that would be the way to go too
@@GarageGear 21464 - Got it for $100.00 off with coupon Not the greatest but it's just 1/4 acre. I figure if I coat the bottom 2x with Slip Plate, that should help with longevity. Speaking of Slip Plate - I've seen your video about it. I'm going to put the can in a plastic bag, then set it in a bucket of very warm water for 20 min or so, then flip it over and repeat - I'll update and let you know if that helps with the mixing of it... Thanks!
I always start the mower after washing it. It heats up the engine That will dissipate the moister around any electronics and the muffler will will do the same for it.
Have a 2008 Toro recykler clean it every time and repaint inside deck for this season but some plastic parts are very expensiv for Toro😢 change blade to and have to use a lot of force to lose it
I love the quality and cut of my Honda HRX 217HYA 200cc with hydrostatic transmission. However, their deck design, which is plastic and has tons of underside vents, is the worst design I've ever seen to clean pitfa. Literally take blade off and on hands and knees with various tools to clean between the underside vents, I hate it but love the cut.
ADVICE...... When your mower is still fairly new remove the blade and treat the bolt with "Never Seize". Using water under the deck will make that bolt rust and could ruin the mower.
Or : WD 40 & LUBRICATION ON THE MOVING PARTS ~ EXCEPY BELTS= 1992 SEARS ( RIP) STILL RUNNING 🏃♂️ WITH A HORAD OF OLD PARTS & AVGAS : ( better bearings & battries & ~~ waiting for Chinese parts that fit😮 a torque wrenh & a rachet socket start AND AND ~~~~😂❤🙏
After I use my pressure washer, I will use my air compressor or leaf blower to blow off the water and then I will give it a nice coating of penetrating oil everywhere or fluid film… Yes, stick to it but if you’re washing it regularly, it’s all good and it will prevent corrosion. 👍
You do a great job I cant deny but maybe too good considering the hell the deck underneath goes through. Not to mention if you cut heavy grass or much it will instantly look like crap. Shut the gas off tip of side right after cutting and blast it with a hose.
This John Deere walk behind has a cast aluminum deck, it will not rust but it will oxidize. Keeping it clean will prolong its life. I could tell more if I saw the underside. Thank you for your posts they have been very helpful.
Hey mark the smart stow position. Is when the mower is in its upright position. I show it throughout the video and the thumbnail photo. Only certain mowers can do it!
Try Waxing the deck. The grass won't stick. My son did this on the steel deck mover , and i did it on my new Ryobi plastic deck. Took only 12 minutes, and another 10 for the rest of the mower.
I've done the slip plate and it work very well. We have had a very dry and hot summer. The grass does not have the high moisture so a cleaning after every mowing hasn't been needed.
Just curious though if anyone has actually tried the method suggested in the Toro manual. It says to run the mower on clean concrete surface and spray the hose in front of the right side rear wheel, letting the blade help clean the under side. Sure, I will try it myself, still haven't had time to unbox mine yet.
Spotless until the next time it's used. My mower gets some level of deck-grass (minimum), but then as it is used to cut dry grass, the grass itself seems to "grass-blast" it clean - somewhat self-cleaning.
funny how your video pops up , and I just did this to my oldest mower,yard fine! sat outside , no cover for a yr . great video. your spot on . rust paint I was gonna use . primer
I also put that super slick stuff underneath. At the store for car detailing they have ceramic spray-on and rinse off additives that makes it easy to keep the bottom slick...
Used mower here BUT..For me it goes on its side, carb up, scrape bottom with old paint scraper with round edges. Hose bottom them clean the yard or driveway of wet grass. JB, It could be dry out with no rain for days and I still get wet grass.🤔 Any way to put something on the underside or a slightly rusted deck? Another video on that maybe.
I have a 10 year old Sears mower with a mulching blade on it. Everytime I use it, grass cloggs the 5 X 5 inch hole where grass clippings are supposed to blow thru to reach the catcher. Also, the end of the blade accumulates such a clump of grass that the blades sieze because it can't flow thru it.. I haven't tried the Slip Plate coating, but still the design of the mower, I feel, wasn't thought through. How so I get past this? Yes, the grass is wet from dew in the morning, but I'm mowing past 4:00 and still is a tad wet.
Jack the wheels way up if parking it on clay, cement or dirt. At least the condensation should be less. But under a carport or canopy is a million times better than no cover at all. Some tarps offer almost no protection from hidden corrosion in electrical contacts and switches. The magnets will rust horribly. I guess live and learn.
I have a similar Toro mower with the smart stow. One thing I would suggest after you blow off the mower after you have pressure washed it, spray some lubricant around the inside of the wheels and cables that could potentially rust or bind. My mower has had the tendency to be difficult reversing with the personal pace system active if I miss this step.
Hey JB! I think you made an awesome video on this topic! Thank you for making a video on it after I asked 😃😋❤ Any thoughts on an electric mower? Feels like the motor is closer to the blades and possibly more susceptible to damage with water inside the mowing deck? Thanks for the video! ❤
Hey Chris! Thanks for the inspiration! I would assume you’d be alright spraying out a an electric mower but things could vary by model! I would be brief, and be done when spraying. The hood method will more likely be your friend! Have a good Sunday bud!
If I may offer an important suggestion. First and foremost, disconnect the spark plug! One ony has to think about hand starting an old-fashioned Biplane aircraft's engine. Question, how often would you suggest removing and sharpening the cutting blades. Myself, every 3rd or 4th, depending on inspection. If there's more than just a couple of Knicks from the odd loose landscape rock.
Hey autumn here is link explaining it. www.remodelormove.com/what-causes-a-lawn-mower-engine-to-lock-up/?expand_article=1. I’ve seen it once before where the mower was tipped the wrong way and oil got above the piston. Locked it right up.
Did I miss the bit about emptying the petrol (gasoline for North Americans) and emptying out the engine oil before turning it on its side ? Placing a mower on its side like that is not good for the liquids in the mower and thus not good for the engine life.
Awesome, I use the power washer, always! I have an Exmark Commercial 21 with the Kawa FJ180. BTW throw those damn Crab Grass seeds in the fire. Damn crab grass
Washing a 60v Toro SR: I don’t use a pressure washer and I do this once a month to avoid stubborn build up. 1) Rinse with hose 2) Spray with cleaner - I use simple green 3) Clean with dishwasher brush and plastic putty knife 4) Rinse with hose. Do this in smart stow position. 5) Run the mower blade for a few minutes to dry deck. 6) Leaf blower for top of mower
Good tips LL! Thanks for sharing
Gotta try that with my ego.
great way to do it
Why not just tip it over sideways? Full 90-degree access..
Depends on the engine design…
I never did undercarriage maintenance to my mower, and the deck just rusted apart. The mower still worked great, but it was only 5 years old. I found a replacement deck, and stripped all the parts off the rusted deck, and basically rebuilt the mower. Now with watching your videos I am able to clean my mower properly! I also have an old tire brush that I use to clean out the deck after using a hose to it. Once I clean it I let it dry, and every fourth use I apply silicone spray to the deck. I think that helps keep grass from sticking, but it cant hurt. I also remove the spark plug wire, as I learned that as a kid so I don't accidentally cause the mower to spin on.
Thanks for sharing this information dmg
Your students are lucky to have you as an educator JB. You are incredibly effective at teaching and I see why this is your calling...that and making incredibly helpful and useful videos for your devoted viewers....such as myself.
And you ALWAYS make me laugh out loud at some point.
That power washer does more than clean vinyl siding after all. It works well on big decks!
With thanks always dear friend.. Hit that LIKE button all.
JB is funny as hell. He has me laughing at some point in every one of his videos. 😀👍🏻
Thanks for the kind words Joe! I enjoy doing what I do! And hopefully can leave teaching one day to do this full time! As always thanks for being a cool fan! You ROCK! 🫵👍
ROCK ON PAUL! 👍
@@GarageGearhi I think I saw a flame coming out of my husqvarna awd lawn mowers muffler when I was trying to start it have any idea on why it happened
@@seang780 not exactly sure my friend ! Perhaps there was some gas in the muffler? I don’t know without seeing it first hand.
Hey JB, great video on how to thoroughly clean a mower deck. Just a quick observation though, like yourself, I've been taught a lot of things from my dad over the years with respect to in and out of the garage, but his first rule of thumb (pardon the pun here) was before putting your hand under a mower deck, or snow blower, was to unplug your spark plug. I've never forgotten this rule, and have all my fingers and toes. Is this an old wives tale that turning the blade could engage a cycle of the engine? Love to hear your feedback on this and as always, great videos. Thanks
Hey Darren! Couple things here. First off I’m damned if I mention it and damned if I don’t. People always have something to say about this. In 25 years of using a mower I never had one start up on me using these methods. I’m also not hitting, twisting, spinning or even touching the blade on purpose to give it any reason to start either. It would also take a lot of revolutions of the blade to start the machine up. A bump here and there on the blade is not going to start it up. Thanks for watching! 👍
Yes, always always always unplug the spark plug. When you're under the deck it's easy enough for you to twist the blade a bit and if it's warm or the piston is in the just the right spot it could start. It's not likely but it's just a precaution you have to take when you're putting your hands inside a machine with a sharp blade that can spin at 3000 RPMs
I don’t think it would be possible to start the engine since the (mandated) engine brake is applied.
Most excellent! I’m a small engine mechanic and I wish everyone would follow these steps for the sake of their mowers and for their mechanics when they bring it for maintenance. 😊 Also, If the mower doesn’t have an automatic blade/ engine stop, please disconnect the spark plug wire for safety when your hands goes near the blade…many of my older colleagues have learned this the hard way and now have 3/4 fingers!
Thanks for sharing and watching!
@user-rb8bi7es1n You have many colleagues with mangled fingers? BS! I get you are trying to make a point, but lying serves a bad purpose!
For the last twenty five years, ive just taken the mower to end of driveway and shoot a stream of water from the hose up into the mower while it is running. I do it almost everytime. Then hose off the top of the deck and let the mower run for 2-3 min after in the sun to dry. At the end of mowing season it takes about 10 minutes to wipe or scrape what little grass is under the deck.
Good tip! Thanks for sharing john
I have always just scraped out the grass clippings out. Then spray some WD 40 on the surface to help keep the help the grass from building up.
Good tip!
DANGER: Disconnect the spark plug! If it kicks on…you lose a hand!
Thanks for looking out for me!
Hey JB thanks for yet another great video. I watched your reviews on the Toro 21564 and bought one via online order from Home Depot. This is my first Toro and after owning 2 Hondas since 1989 it was a big step for me. (HR 214 and a HRX 0:23 217). Like you I do all of my own maintenance and mechanical work.
I am sure glad that I went with the Toro, especially since Honda is pulling out of the residential market.
2 other quick things, I have the same exact power washer and have had it for 7-8 years. The only problem that I had with it was the pump seals gave out and it was leaking bad. I found a video online where a guy had the same exact issue with he replaced the seals and wah lah the issue was fixed. So if yours ever leaks know there is a cheaper way to fix it than replacing the pump assembly.
Also noticed you are a Jeep Wrangler man. 👍👍 I have a 2017 75 th anniversary JK and love it. This the 4th Jeep I have owned since 1973. I had a 57 CJ, a 63 CJ, and an 80 Renegade. So after raising the boys and hitting the golden years and retiring I am on my 4th and probably last Jeep. I take very good care of it as I do and have done my entire life. Comes from being raised right and paying for my own stuff forever.
Anyway enough rattling. Just wanted to say thanks again for all of your great videos. Keep up the good work my friend.
Thanks for sharing this information J! Good to know! Appreciate the positive feedback my friend!
Locking that piston at top of cylinder is perfect
Saves you the drama lol!
I picked up the new Toro Recycler. It was the rear wheel drive with a steel deck. I looked around for one with a discharge chute. I guess they have sold out of those in my area. My old lasted six years before the deck cracked in several places with hard use. And I didn’t follow your deck cleaning process. I mowed six yards each week. I did get the discharge chute from Toro, but I’m not sure how it will turn out. I will keep you informed
Thanks for sharing this Tim!
Nothing more invigorating than a nice clean deck
You got it chris! Thanks for watching!
Great Video, thx for making it. One thing to add here, when you clean the deck with water, if the mower has a side discharge with a spring loaded cover. Make sure to hit that spring assembly with WD-40. I had a small amount of rust on mine.
Good tip thanks for sharing Alex!
On a very clean or new mower deck, I spray rubber coating like gravel guard.
Helps grass not to stick and deck not rusting.
Very good video al always JB
There ya go! Thanks for watching lop! 👍
Great tips on mower “deck” cleaning JB! As hard as I’ve tried, I just can’t get that JD X370 tipped on it’s side to clean the deck….😂. It does have the water clean out port but I’ve never used it or ever will. As you mentioned, water and metal don’t mix. Also, I think you should wait until the mower is cooled off a bit after mowing before hitting it with water. IMO. Hey can I borrow your power washer?? Oh….that’s from another video! Hope your enjoying the pool! Cheers buddy!
Hey Jay! Ever think about getting some kind of mow Jack? Lifts it right up from the front so you can get at it. Good tip my friend! You can definitely borrow my power washer! Definitely enjoying the pool! It’s keeping me sane! Lol! Enjoy the rest of the weekend bud. 👍👍
I don't think I have ever cleaned a lawnmower this well in my life.
Your lawn mower will thank you! 👍
After that '15min drying' just try to restart before putting the mower back into his place , no surprises next time ( possible carb or oil issues) when using it.
Thanks for sharing Andre!
Hey JB!! Its great to get people motivated to clean their decks. I always wet the grass under the mower and let it sit for 10 minutes or so. The dried grass comes off so much easier.
And I always run the mower for a few minutes after it is wet to dry the bottom and prevent rust. And blow it all off. Any tips on cleaning the catcher mesh? seems no matter what I do
the mesh clogs up, Its a small riding mower. Blessings to you and your family, have a Great weekend!! We are in another dry spell here in Cleve.
Hey Ted! Good tip! I usually just pressure wash the lawn mower bag at the end of the season! I usually stand on it with one leg to hold it in place. Gets it pretty clean! Then just let it drip dry in the sun! 👍
I have cheap electric pressure washer for clean around the house but after I mowed, I clean it with it because I storage the mower inside garage. If mower is clean, i don't need to clean the garage more often
Smart thinking Carlos! Have a good weekend brother! 👍
Ahh, morning coffee w/ JB, yes, don't forget important 1st step 1) ALWAYS disconnect sparkplug and 2) If you're a seasoned professional you can get two (2) beers consumed in that 15min "drying in the sun" timeline!!
Hey yale! Important safety tip! Thanks for mentioning it! The way this briggs engine is messing with the spark plug could probably cause catastrophic failure lol! Have a good Sunday bud!
@@GarageGear To clarify, are you saying we shouldn't disconnect the spark plug?
@@jacobroberts1483 I wouldn’t on these 190cc briggs engines
@@GarageGear but it's not dangerous to work on it with spark plug still attached?
@@jacobroberts1483 you can unplug it if you feel it’s necessary.
Informative video. I only use a wood shim to scrap out my deck. Never metal.
That’s a great idea chris! Thanks for sharing
Hey JB, how bout COMPLETLY cleaning the underside (like dinner plate clean) and give it a paint job right before the off-season?
Could do that! Not a bad plan! Thinking of doing that to yours?
Yes, just a thought!
I bought a Toro Personal Pace 22 inch Recycler in 2015 and i always tip it on its side and hose it clean. Its still going strong and never had a problem.
Thanks for sharing!
Thanks man its heavy grass growth here in ontario Canada, and im cleaning deck almost every cut. The stand up tip is golden thanks. We have all had oil in the air filter not fun. New sub great presentation!
Thanks for sharing John! Appreciate you!
I used to have an old toro with a hose port on the top of the deck. Hook the hose right up to it. That not a thing anymore?
Edit: just finished the video and see you mentioned it. In the spring and fall when there’s a LOT of grass, and/or if the clippings are damp and sticking to the deck a lot, the washout port definitely gets a lot. It’ll make your driveway look like to spilled pesto all over it. Definitely up there with your quick rinse method. I’d hose the whole mower off then run it for a minute or two to help it dry. No more of a rust issue than anything else with water.
More good tips! Thanks for sharing Ben! Have a good rest of your weekend!
Me: “Hey honey, I’m going out to wash my deck!”
Wife: “But you just TOOK a shower”….
🤣😆🤣
Awesome stuff, JB. 👍🏻
You gotta do what you gotta do right Paul!?!…
Stay awesome my friend! 👍😂🤝
The washout port on my Honda works like a dream.
Thanks for sharing tb!
Make sure to remove spark plug wire from spark plug first for safety. You don't want the mower to accidently start while turning blade while cleaning.
Thanks for sharing
Great tips and tricks - I really like the good better best concept- for anyone reading this with a Honda HRC216 mower - the manual recommends a plastic scraper for under deck cleaning - I use a plastic car body alignment tool from harbor freight; seems to work pretty well
@@carlloftin2850 good tip my friend! 👍appreciate the positive feedback
Make sure you pull the plug wire off before working underneath…if you pull starter cord until it hard it will be TDC (top dead center) eliminating “hydro locking”
Thanks for sharing these tips mark!
What about a battery operated lawnmower?
How would the water affect that?
It would most likely affect something! I would just scrape the deck!
As you stated, pulling the engine cord to TDC will prevent hydrolocking, so I also tip the mower on its side with the carb up. I use a plastic scraper rather than metal to minimize paint damage and a plastic sheet rather than cardboard to catch the scraped clippings as it is easier to fold up and dump the grass into a trash can.
@@gordon-1 good tips thanks for sharing
After pressure washing I also blow off the top of the mower. But after that I start the mower and engage the blades to further aid the drying process. Wash out ports suck.
Thanks for sharing Dale! They really do! 👎
Had my super recycler for 22years and it is important to clean off the grass under the deck otherwise it will just leave clumps on the lawn. Also with the very lowest height setting will leave clumps same with the grass being wet. The grass has to be completely dry to benefit the recycling/mulch. Happy mowing season.
Good tip to share! Thanks for following along! 22 years! That’s a long time!
Toro's instructions are to run the mower on level pavement while spraying water on the pavement behind the right front wheel. Anyone here ever try that?
Personally, I've got the Toro Super Recycler and have been tipping it on it's side setting my multi-spray spray head to 'stream' and carefully spray the bottom with a stream of water. The deck ends up very clean, no water topside, when finished. Takes 5 minutes after every mow.
I’ve tried it before and it doesn’t get it very clean. The stow position works great for this though
Do you have tips on sharpening blades?
I have a video on that that I released a few years ago. I’m going to make another video soon.
Americans do go on. I've had my lawnmower for 30 years now (Hyter). I just scrap the junk out once a year/oil change and sharpen blade's and its still going strong.
Thanks for sharing
Ha! I just bought that exact scraper like a week ago. Still waiting on my crab grass seeds to show up though!
Hahaha I have plans for those on a neighbors lawn! 😈
@@GarageGear 😂😂
I would suggest a face-mask added to the clean out kit. That stuck grass can have a lot of mildew or mold in it.
Safety goggles
Thanks for sharing Chet!
Why not go for a full blown hazmat suit? Never can be too safe
The better method is my way JB, THANKS!
That’s a great way to do it Gregory! !👍
Thanks to your videos, I just got a Toro Super Recycler 163-cc. This coming weekend Im going to break in the motor and see how it goes. Thanks again really appreciate your info.
Awesome grey suit! Enjoy the mow my friend! 👍
Coat The Underside Of The Deck With Truck Bed Liner Spray, Works Great And, Help's With Minor Rust Issues...
@@wwvette good tip!
I either use a garden hose or pressure washer on both my walk-behind and zero-turn. My neighbor has cleaned his riding mower deck ONCE in 17 years! Hasn’t sharpened his blades either and it shows…the mower leaves long trails of grass on his yard.
Bet that wouldn’t happen if he took care of it once in a while!
oh and the stand , is brilliant. stupid me , i have 2in box, used once .
thank you!
They work great bud! 👍👍
I do the powerwash method every year before winter rolls in. After that, I let it dry off and hit any scratches with some black rust-oleum to prevent the deck from rusting out over the winter.
Solid plan my friend! 👍
Buying my daughter a mower as she is buying her first house. She's getting a link to this video before the mower arrives JB! Hey how's that Toro - in comparison to the Honda's. I have an old Honda with the nexite deck which has held up great...
Awesome! Which one is she getting? The Toros are junk now a days. You would be better of getting a slider older one that is one good condition. Honda’s are done as of last sept so if you can find a gently used one that would be the way to go too
@@GarageGear 21464 - Got it for $100.00 off with coupon Not the greatest but it's just 1/4 acre. I figure if I coat the bottom 2x with Slip Plate, that should help with longevity. Speaking of Slip Plate - I've seen your video about it. I'm going to put the can in a plastic bag, then set it in a bucket of very warm water for 20 min or so, then flip it over and repeat - I'll update and let you know if that helps with the mixing of it... Thanks!
Great video and thanks for the cleaning tips. I also see a Centurion on your workstation.
You got it DJ Mike! That was one of the best 80’s cartoons. Loved it! Point for you for noticing! Thanks for watching bud!
I always start the mower after washing it. It heats up the engine That will dissipate the moister around any electronics and the muffler will will do the same for it.
Thanks for sharing my friend
Have a 2008 Toro recykler clean it every time and repaint inside deck for this season but some plastic parts are very expensiv for Toro😢
change blade to and have to use a lot of force to lose it
@@erik3287 thanks for sharing erik
I love the quality and cut of my Honda HRX 217HYA 200cc with hydrostatic transmission. However, their deck design, which is plastic and has tons of underside vents, is the worst design I've ever seen to clean pitfa. Literally take blade off and on hands and knees with various tools to clean between the underside vents, I hate it but love the cut.
Thanks for sharing Shane! I know those decks have lots of grooves.
What should you spray underneath your deck to avoid the spread of lawn diseases like dollar spot?
Hey James as far as I know there is nothing to spray to prevent the spread of lawn diseases. Keeping it clean will be your best option.
ADVICE...... When your mower is still fairly new remove the blade and treat the bolt with "Never Seize". Using water under the deck will make that bolt rust and could ruin the mower.
Good tip!
Or : WD 40 & LUBRICATION ON THE MOVING PARTS ~ EXCEPY BELTS= 1992 SEARS ( RIP) STILL RUNNING 🏃♂️ WITH A HORAD OF OLD PARTS & AVGAS : ( better bearings & battries & ~~ waiting for Chinese parts that fit😮 a torque wrenh & a rachet socket start AND AND ~~~~😂❤🙏
Lube it after wash 👌 works every time
After I use my pressure washer, I will use my air compressor or leaf blower to blow off the water and then I will give it a nice coating of penetrating oil everywhere or fluid film… Yes, stick to it but if you’re washing it regularly, it’s all good and it will prevent corrosion. 👍
do a video on how to organize your garage -- yours is so neat
That’s coming out this summer stay tuned
Those wash out ports are garbage. They seem to make more of a mess than help. Great tips JB!
💯agree bud! Green slime everywhere! Have a good weekend!
You do a great job I cant deny but maybe too good considering the hell the deck underneath goes through. Not to mention if you cut heavy grass or much it will instantly look like crap. Shut the gas off tip of side right after cutting and blast it with a hose.
Thanks ps! Good tip
This John Deere walk behind has a cast aluminum deck, it will not rust but it will oxidize. Keeping it clean will prolong its life.
I could tell more if I saw the underside.
Thank you for your posts they have been very helpful.
Thanks for watching mark!
Love the content. Would you rather buy the Honda hrn16 or the toro recycler? Both around 550 and 525? Thanks again!
Honda hrn would be my pick. Had mine for four years without a problem! 👍
What is the "smart still position"? Did you show it? If so, at what time?
Hey mark the smart stow position. Is when the mower is in its upright position. I show it throughout the video and the thumbnail photo. Only certain mowers can do it!
My understanding is that side tipping a petrol mower isn't good?
@@photoeducationbydaniel it can be if you tip it the wrong way
Try Waxing the deck. The grass won't stick. My son did this on the steel deck mover , and i did it on my new Ryobi plastic deck. Took only 12 minutes, and another 10 for the rest of the mower.
Thanks for sharing David!
I've done the slip plate and it work very well. We have had a very dry and hot summer. The grass does not have the high moisture so a cleaning after every mowing hasn't been needed.
Hey neal! As soon as fall comes around so will the rains. You’ll be happy you slip plated it! 👍
@@GarageGear Right after I posted on your channel, we got 1.25 inches of rain. I now have to eat a little crow! Lol
@@nealgunderson7799 lol we just got a ton yesterday too!
I agree, washout ports aren't very effective. Good stuff JB 👍
They’re pretty lame! Haven’t seen one that actually does a great job! Appreciate you Smallblock! 👍👍
Hello sir, how do you find TDC on lawn mower?
I sprayed my Toro catch bag out today with the hose. There was a massive amount of foam.
Oh yeah you’ll get a lot of foam sometimes.
Great workbench, with a vise too. Any videos showing how to put together a good workbench? I'm envious! Good lawn mower video, by the way.
Appreciate you wetherby! Thanks! Might do a video on a garage walk around soon!
Just curious though if anyone has actually tried the method suggested in the Toro manual. It says to run the mower on clean concrete surface and spray the hose in front of the right side rear wheel, letting the blade help clean the under side. Sure, I will try it myself, still haven't had time to unbox mine yet.
I did that once before deck was still clumped up a bit and the grass basically just got wet lol!
Spotless until the next time it's used. My mower gets some level of deck-grass (minimum), but then as it is used to cut dry grass, the grass itself seems to "grass-blast" it clean - somewhat self-cleaning.
Mowing dry grass is always the best way to go!
Spray T9 on the electric components to ward off corrosion. The Navy uses it on aircraft at sea... works exceptionally well
Good tip thanks for sharing!
funny how your video pops up , and I just did this to my oldest mower,yard fine! sat outside , no cover for a yr .
great video. your spot on .
rust paint I was gonna use . primer
Thanks for sharing edgardo. Interesting how these videos have a way of popping up!
Thank you for the awesome idea and thank you for the video
You got it lil Joe
I also put that super slick stuff underneath. At the store for car detailing they have ceramic spray-on and rinse off additives that makes it easy to keep the bottom slick...
Another good tip! Appreciate you sharing this!
This guy sounds like ChrisFix's dad.
Thanks for watching
I use garden hose and sprayer wand after each mow on my yard force and nothing sticking
Thanks for sharing!
🤣😂 "cleaner than a nuns vocabulary," You're Killing Me Smalls!!
Rock on, Swampy! lol! Hope the weekend is treating you well.
What is that additional red blade that’s attached to the blade?!!
That is part of the recycler. It helps disturb the air and clipping La underneath the deck to better recycle them. 👍
Used mower here BUT..For me it goes on its side, carb up, scrape bottom with old paint scraper with round edges. Hose bottom them clean the yard or driveway of wet grass. JB, It could be dry out with no rain for days and I still get wet grass.🤔 Any way to put something on the underside or a slightly rusted deck? Another video on that maybe.
Hey Ed! I’ll have a video on slip plate coming out this weekend. It prevents rust and keeps grass from sticking. Stay tuned!
I have a 10 year old Sears mower with a mulching blade on it. Everytime I use it, grass cloggs the 5 X 5 inch hole where grass clippings are supposed to blow thru to reach the catcher. Also, the end of the blade accumulates such a clump of grass that the blades sieze because it can't flow thru it.. I haven't tried the Slip Plate coating, but still the design of the mower, I feel, wasn't thought through. How so I get past this? Yes, the grass is wet from dew in the morning, but I'm mowing past 4:00 and still is a tad wet.
Those old craftsman mowers had a horrible mulching design and always clogged!
YES! I’m going to try WD-40. Does this application need applied after each Clean? 😊
More than likely yes but perhaps if the grass is dry you could get away with a couple mows! Thanks for watching!
Jack the wheels way up if parking it on clay, cement or dirt. At least the condensation should be less. But under a carport or canopy is a million times better than no cover at all. Some tarps offer almost no protection from hidden corrosion in electrical contacts and switches. The magnets will rust horribly. I guess live and learn.
Thanks for sharing marsh!
How to fix a husqvarna leaf blower that won't start at all. It worked last year. Thank u
Check your carburetor my friend! 👍
Myn has been running fine for like 10 years 0 cleaning guess ill do some maintenance lol
Your mower will thank you!👍
Great video! Thanks!
You got it mark! 👍
@@GarageGear Quick Q, I own the HRN216 as well… when you store it away for winter, how much fuel should you leave in it?
@@marknicol9405 I drain it completely dry mark! Run it until it’s empty!
I have a similar Toro mower with the smart stow. One thing I would suggest after you blow off the mower after you have pressure washed it, spray some lubricant around the inside of the wheels and cables that could potentially rust or bind. My mower has had the tendency to be difficult reversing with the personal pace system active if I miss this step.
Good tip YY! Thanks for sharing 👍
Love your channel man!
Appreciate you sergi!
How about a harbor freight jack stand?
Hahaha supposedly those are better now.
Hey JB! I think you made an awesome video on this topic! Thank you for making a video on it after I asked 😃😋❤ Any thoughts on an electric mower? Feels like the motor is closer to the blades and possibly more susceptible to damage with water inside the mowing deck?
Thanks for the video! ❤
Hey Chris! Thanks for the inspiration! I would assume you’d be alright spraying out a an electric mower but things could vary by model! I would be brief, and be done when spraying. The hood method will more likely be your friend! Have a good Sunday bud!
@@GarageGear Thanks JB! ❤ You have wonderful Sunday as well!
SAFETY FIRST!!!! Remove the spark plug wire before getting near the mower blade. Very presumptuous to assume all watching will know this.
Damned if I do damned if I don’t
If I may offer an important suggestion.
First and foremost, disconnect the spark plug!
One ony has to think about hand starting an old-fashioned Biplane aircraft's engine.
Question, how often would you suggest removing and sharpening the cutting blades.
Myself, every 3rd or 4th, depending on inspection.
If there's more than just a couple of Knicks from the odd loose landscape rock.
Thanks for sharing Mike! I usually sharpen the blades once in the spring summer and fall! Thanks for watching!
I accidentally made little paint chip on bottom of super recyler, should i spray that are with paint?
Hey James! That won’t be your last lol! I would wait until the end of the season and hit it then! Basically before you tuck it away for winter. 👍
Can this be done on a battery operated mower or will it damage the components?
Should be fine! Be brief with the rinse and see how she does! 👍
is it just me, or do modern mower blades seem to rust faster?
Yeah I would agree!
OH, sure I’m about to do this!
Thanks for watching
Hi GG, could you explain hydrolock? Thanks.
Hey autumn here is link explaining it. www.remodelormove.com/what-causes-a-lawn-mower-engine-to-lock-up/?expand_article=1. I’ve seen it once before where the mower was tipped the wrong way and oil got above the piston. Locked it right up.
Thank you!@@GarageGear thank you!
Don’t mow wet grass. Don’t wash a mower deck. Just brush it.
Thanks for sharing
Another great video
ROCK ON DEREK! Thanks for watching! 👍
JB im taking tips frome you
Awesome!
Shouldn’t you also turn off the gas supply valve
You could. Some mowers have them. Some don’t.
@@GarageGear I have the HRX217K6VKAA should I turn the valve off after each cut or only at the end of the season. It’s for home use.
@@dlroto since a mower gets used more frequently than a snowblower it’s not as important to shut the fuel off at the fuel line.
Did I miss the bit about emptying the petrol (gasoline for North Americans) and emptying out the engine oil before turning it on its side ?
Placing a mower on its side like that is not good for the liquids in the mower and thus not good for the engine life.
Tip it oil side down you’ll be fine
Awesome, I use the power washer, always! I have an Exmark Commercial 21 with the Kawa FJ180. BTW throw those damn Crab Grass seeds in the fire. Damn crab grass
Hey Chris! I’m saving those seeds for a neighbor who pisses me off. Stay tuned for a short lol! 👍👍😂
Great video JB. I have to do this to mine. You just reminded me. 👍🙏👍👍have a bless weekend
Thanks electro! Add it to your weekend TO DO LIST! You as well my friend!