I’m going to do a brake job on my daughters 2014 CX5. Her fill cap suggests DOT3. I see you used DOT4...mechanics preference since both brake fluids can coexist. Great video!
@@chadwickwood9843 just need to read the bottle to make sure it’s compatible with DOT 3. In the old days… you couldn’t mix the 2 because Dot 4 contained silicone and Dot 3 did not
Love your videos Felix! I think every video has a truck horn honking in the background. So funny. It’s also cool that you video as you drive around. It’s controlled chaos.
The rear one i use ID hose approx 0.5 cm. The front ones i use ID hose approx 0.7 cm. hope this helps. You could also secure it with zip tie if its slightly loose.
Thank you . Everything works great no issues what soever . If you got air in the master cylinder perhaps repeat the process until there's no more air in the brake system .
Should b similar. Do the furthest one away from brake master cylinder. Don't forget to give ur support to this channel by hitting the Like , Subscribe button and share with your friends / on forums. Thank you .
Is there absolutely any need for a vacuum or can this purely be done by manually pumping the brakes? I have alot of air in the system I accidentally introduced when my brake piston came off.
It will depends on how many times you let the fluid out from bleeding the brakes, Usually if its clear brownish color, you only need 1 full bottle. about 350ml to 400ml to get it clear fluid again. if its dark may use abit more than 400ml .. Hope it helps. Thank you for your support. ✌️
How level of surface does car need to be on? If I jack up one side at a time and put on stand will that affect the level substantially? How do you dispose of old fluid? Thank you n
You could do one side at the time just make sure your brake fluid reservoir is on minimum to maximum line (if its just under minimum line) it is also okay whilst doing this procedure. Just make sure once you have finished place the car down and dont forget to top it up as needed till reach maximum line. Old fluid can be disposed at your local mechanic area i think they accept it for free or some fee depends where your area is. Cheers.
Hi, how do you remove the brake fluid reservoir screen at 1:45? I cannot figure it out on my car, those 4 snap taps are annoying, cannot pull it out with just 2 fingers like in your video.
shane walsh on the first sets, i had pump the brake pedal 5 times and locked it and refill the fluid then reopen the bleeder valve. Then do another 5 more pump to complete the brake flush procedures. So total of 10 brake pedal pumps. It was enough to let the old fluid out of the systems.
I’ve noticed rattling on acceleration by letting off the gas and then accelerating on my 2018 Mazda 3 is the anything that could be causing it they replaced the tensioner pulley so I don’t know what could be causing it
There is an item with a spring in it near the end of your bleeder tube. Is that a one-way valve? I didn't see that you mentioned it. Also, I understand closing and opening the bleeder valve between pumps when someone else is pumping the brake pedal. It prevents old fluid from backing into the caliper when the pedal is released. But you are pumping the pedal multiple times without closing/opening the bleeder valve. Why are you doing it after multiple pumps in your method? There is no explanation given, and I can't figure out how it would help anything with your method. It may be important. It just isn't clear.
If you are doing it yourself you have to pump the pedal multiple times until fresh fluid comes out and making sure that all the air is out of the system. That's why the tube is submerged in fluid so that air does not come back into the system once he releases the brake pedal.
Pak maaf, sy lagi ini ingin bertanya. Ketika mau pump master rem perlu turn on mesin ga? Soale kondisi mesin mati kan rem terasa keras dan baru setelah mesin hidup baru bsa di injak dalam. Maaf sy agak awam jdi bertanya dlu drpd salah prosedur pengerjaan. Terimakasih pak felix 🙏
Maju terus dan semangat pak buat konten nya. Sejauh ini sy sangat rasakan banyak benefit nya. Sudah stop masuk bengkel (bsa kurangi intensitas keluar d masa pandemi) dan jadi tau banyak hal serta harus bagaimana kalau ada kendala pada kendaraan. Budget bengkel di konversi semua ke tools dan penunjang nya (grease, cleaner2 dll yg semua nya bsa pilih brand terbaik sesuai budget). Nice content pak 🙏
Hello, your very explanatory video is excellent, a query once the brake fluid has been changed, it is not necessary to purge the ABS solenoid valve module. Greetings from Chile.
get 2 bottle . just incase you need to top up. 1 bottle is enough but depends on the quality of the old fluid. if its dirty do a good full 1 bottle flush n then top up.
Noted. Thanks bro!! I watched a lot of your tutorials, I followed your way and learnt a lot !! Thank you very much. Hope to see more of the CX-5 maintenance's video from you :) Cheers~
I have a Mazda cx3 which I bought in 2015. The owners manual recommend DOT 3 fluid. I would suggest that most Mazda's would have the same including the cx5. DOT 4 has a higher boiling point than DOT 3. Check out the owners manual before you bleed your brakes.
@@FelixDanGarasiAuto But if I put the car on jackstands and open for example the RR bleeder and the other person is pressing the brakes pedal, you can rotate the RR and FL but the LR and FR you can't move , which means it's a diagonal system, right? In this case it would be also better to bleed them in this order or not ?
That plastic pipe line should be held a little bit higher over the bleeding valve because air always travel upstream.
otherwise,good work!
Great video! The dealer wanted to charge me $160 for this. Gonna do this myself!
😁✌️ No problemo
seems easy enough. looks like mazdas don't require any special nipple to attach to the bleeders. i'll do this myself, thank you for the video.
😁👍🏼 no problemo. easy peasy
Thank you, my friend, I have benefited greatly from the maintenance of my Sky Activ Vehicle from Saudi Arabia
A recommendation ... next time keep the drain container above caliper. It forces air out faster.
Noted sir :)
I’m going to do a brake job on my daughters 2014 CX5. Her fill cap suggests DOT3. I see you used DOT4...mechanics preference since both brake fluids can coexist. Great video!
Yes and yes
dot 4 does last longer n better performance.
@@FelixDanGarasiAutoI don’t think that’s true. Dot4 absorbs moisture faster than dot3
@@chadwickwood9843 just need to read the bottle to make sure it’s compatible with DOT 3. In the old days… you couldn’t mix the 2 because Dot 4 contained silicone and Dot 3 did not
Thank you so much for this video you saved me over $100!!!!!
hoping u upload more videos like this bro felix! nice job
Love watching your videos...thanks for posting this.
Cheers mate.
Love your videos Felix! I think every video has a truck horn honking in the background. So funny. It’s also cool that you video as you drive around. It’s controlled chaos.
Haha. Glad that you guys enjoyed it. Yeah here is differrent locals uses honks everyday its just because they wanna honk haha.
nice video hope i can do it without any trouble on my mazda 2 skyactiv! thanks
Great instructions. Can you do a video on brake pad and rotor replacement for a 2016 CX-5 with EPB?
i ll see what i can do for you
Hi felix would you be able to tell us the size of the hose that fitted in the bleeder vale? Thanks
The rear one i use ID hose approx 0.5 cm. The front ones i use ID hose approx 0.7 cm. hope this helps. You could also secure it with zip tie if its slightly loose.
@@FelixDanGarasiAuto thank you sir
Great video! Any concerns with ABS?
Also, I think the air got trough master cylinder, what should I do ?
Thank you . Everything works great no issues what soever . If you got air in the master cylinder perhaps repeat the process until there's no more air in the brake system .
Felix Dan thanks!
Do the wheels really need to be removed? Can a guy just drive up on ramps and maneuver behind with the wheels on?
dont have to remove the wheels if you can access it from the back of the wheels. But u need to get the car up on a ramps to do this.
Just wondering one thing: what’s the bleed order on a 2017 CX-5?
Should b similar. Do the furthest one away from brake master cylinder. Don't forget to give ur support to this channel by hitting the Like , Subscribe button and share with your friends / on forums. Thank you .
I changed brake but feel its jam sometime and some time it's ok.ihave to bleed rgt.its 2022 epb on rear
have you correctly install and regrease the caliper pins and torque the bolts? it should not feel jam.
I'll do it today evening after work
Why not leave the blue filter when pouring in the new fluid? It's designed to catch potential contaminants right?
Right lol it would have just been a slower pour smh but it’s clean brake fluid but you never know that’s why they probably installed that filter 😅
My local independent told me pressure bleeding was necessary on my Touring with the electronic brake
Yea definately could do that extra steps.
Is there absolutely any need for a vacuum or can this purely be done by manually pumping the brakes? I have alot of air in the system I accidentally introduced when my brake piston came off.
@@wangpie8840 hmm your best bet is to get a brake bleed tool or get a frient to help you bleed , repeat slowly until theres no air in the system.
Thank you keep up the good work, peace
Well detailed tutorial, thanks.
Thank you bro and welcome :)
Excelente muchas gracias
you r welcome sir 🙏🏼
Is it also recommended to bleed the clutch? Since there is also old fluid in that line.
if yours are manual then yes bleed the clutch.
Hi I was wondering how many litres of brake fluid exactly does it take to fill up?
Also your videos are excellent for CX-5 owners!!
It will depends on how many times you let the fluid out from bleeding the brakes, Usually if its clear brownish color, you only need 1 full bottle. about 350ml to 400ml to get it clear fluid again. if its dark may use abit more than 400ml .. Hope it helps. Thank you for your support. ✌️
@@FelixDanGarasiAuto thank you so much! It definitely does help!
On Mazda car with electric brake, do we still use this method to replace the fluid?
Yes that is correct.
How level of surface does car need to be on? If I jack up one side at a time and put on stand will that affect the level substantially? How do you dispose of old fluid? Thank you n
You could do one side at the time just make sure your brake fluid reservoir is on minimum to maximum line (if its just under minimum line) it is also okay whilst doing this procedure. Just make sure once you have finished place the car down and dont forget to top it up as needed till reach maximum line. Old fluid can be disposed at your local mechanic area i think they accept it for free or some fee depends where your area is. Cheers.
Good job keep it up
Thank you 🙏🏼
Hi, how do you remove the brake fluid reservoir screen at 1:45? I cannot figure it out on my car, those 4 snap taps are annoying, cannot pull it out with just 2 fingers like in your video.
use a small tweezer 😀
@@FelixDanGarasiAuto Thanks, what a trick, it works!
@@Wesley-CoffeeBean 😎✌️
Hi, thanks for the video, Does your CX5 comes with the electric parking brake?
Nope this version is still mechanical (manual hand pull ) park brake .
@@FelixDanGarasiAuto Hi Felix, Thank you for greats video !
This instruction will works on electrcal parking brake also ? Same procedure ?
@@amnon3267 Yep should be the same procedure.
Why did you tighten bleeder valve a second time then loosen to bleed more fluid? Thanks
shane walsh on the first sets, i had pump the brake pedal 5 times and locked it and refill the fluid then reopen the bleeder valve. Then do another 5 more pump to complete the brake flush procedures. So total of 10 brake pedal pumps. It was enough to let the old fluid out of the systems.
@@FelixDanGarasiAuto 8
Mas mw tanya.. Urutan bleeding untuk cx5 dari ban sisi mana y?
Sequencenya mulai yg terjauh dari Brake master cylinder . Belakang Kiri , Belakang Kanan , Depan Kiri (Passenger) & Depan Kanan (Driver).
Thanks mas felix
Are you closing the brake fluid reservoir after filling it with the new brake fluid, or loosing it opened?
Nope lid stay open . Close it after finish the service and fluid topped up.
@@FelixDanGarasiAuto the brake fluid is higroscopic. Isn't it a problem?
nope i havent recall any problems. But if you like to do that while doing the service maybe give it a go :)
I’ve noticed rattling on acceleration by letting off the gas and then accelerating on my 2018 Mazda 3 is the anything that could be causing it they replaced the tensioner pulley so I don’t know what could be causing it
maybe double check on the mechanic work one more time if everything is tighten to manufacture specs. The engine should not rattle in any sort.
Your calipers are so shiny. Are they new? How old is your CX5? (looks like 2013/14 to me)
Ya 2013. Just have not use the car much. That y they r shiny.
Does this work for 2022 mazda cx5
Yeap should be the same.
There is an item with a spring in it near the end of your bleeder tube. Is that a one-way valve? I didn't see that you mentioned it. Also, I understand closing and opening the bleeder valve between pumps when someone else is pumping the brake pedal. It prevents old fluid from backing into the caliper when the pedal is released. But you are pumping the pedal multiple times without closing/opening the bleeder valve. Why are you doing it after multiple pumps in your method? There is no explanation given, and I can't figure out how it would help anything with your method. It may be important. It just isn't clear.
If you are doing it yourself you have to pump the pedal multiple times until fresh fluid comes out and making sure that all the air is out of the system. That's why the tube is submerged in fluid so that air does not come back into the system once he releases the brake pedal.
What’s with the red zip-tie on your bleed line?
its cool its cool haha
@@FelixDanGarasiAuto lol. I thought it made the job go faster! 😂
Pak maaf, sy lagi ini ingin bertanya. Ketika mau pump master rem perlu turn on mesin ga? Soale kondisi mesin mati kan rem terasa keras dan baru setelah mesin hidup baru bsa di injak dalam.
Maaf sy agak awam jdi bertanya dlu drpd salah prosedur pengerjaan.
Terimakasih pak felix 🙏
posisi mesin mati saja saat pump master rem nya.
@@FelixDanGarasiAuto well noted pak 🙏
Sdh berhasil pak ikutin tutorial ini, hasil memuaskan.
Pak kalau boleh request, bikin tutorial purging injector dong pak. Trimakasih pak 🙏
@@diyersamateur5486 mantap :) baik kapan kapan kalau ad waktu nnti sy coba buatkan ya
Maju terus dan semangat pak buat konten nya. Sejauh ini sy sangat rasakan banyak benefit nya.
Sudah stop masuk bengkel (bsa kurangi intensitas keluar d masa pandemi) dan jadi tau banyak hal serta harus bagaimana kalau ada kendala pada kendaraan.
Budget bengkel di konversi semua ke tools dan penunjang nya (grease, cleaner2 dll yg semua nya bsa pilih brand terbaik sesuai budget).
Nice content pak 🙏
Thanks man, dealership tryna charge way too damn much for this smh (Bay Area) 😑 what a ripoff
no worries brotha happy to help. 🙏🏼👍🏼
Hello, your very explanatory video is excellent, a query once the brake fluid has been changed, it is not necessary to purge the ABS solenoid valve module.
Greetings from Chile.
you dont have to purge the abs module. very much appreciated.
@@FelixDanGarasiAuto Very grateful for your response, greetings from Chile ..
Super 👻
thank you my friend 🙏🏼
What about ABS module, do not need the diagnosis to opne the valves of the ABS module?.
Nope dont need. If you like to do the ABS module you will need to hook up MSDS OBD2 to have control.
@@FelixDanGarasiAuto OK, thanks
@@cransaftvalve734 no worries.
How many bottles of the brake fluid would you need?
I will do 2 bottles.
@@FelixDanGarasiAuto Thanks!
what absorber you using?
ED Tiann i am using BC racing coilover.
How many liters do I need?
get 2 bottle . just incase you need to top up. 1 bottle is enough but depends on the quality of the old fluid. if its dirty do a good full 1 bottle flush n then top up.
@@FelixDanGarasiAuto alright. Will buy 2 liters then. Thank you felix 🙏🏻🙏🏻
Ok can i do it if rear break is electronic
Yeap
Did you bleed the ABS module?
this one only for bleed the brake calipers not the abs module.
What size wheel and tires are you running?
Please watch this video ruclips.net/video/0Ld5Rg_8zqE/видео.html. Thank you.
Velg enkei nya keren mas
Beli dimana mas?
R19 ya?
Beli di jakarta. Iya bro r19.
@@FelixDanGarasiAuto harga baru nya berapa mas?
@@hddurianfarm138 Sekitar 20an ya yg baru nya.
Full flush di cx5 habis berapa cc minyak rem? Boleh beda merk antara minyak lama dan baru?
Beli 3 liter aj bro. Should be plenty. Bole beda tp saran sy beli dot4 aja lebih bagus spek nya.
@@FelixDanGarasiAuto thanks 👍
@@TheSmartBean you r welcome
Felix, may I know what is the size of the rubber tube that you are using?
they are 5mm (Outer Diameter) , 3mm (Inner Diameter)
Noted. Thanks bro!! I watched a lot of your tutorials, I followed your way and learnt a lot !! Thank you very much. Hope to see more of the CX-5 maintenance's video from you :) Cheers~
@@FelixDanGarasiAuto I think you maybe mean 5mm OD, and 3mm ID? 0.3mm ID is like a needle!
@@hotdogger125 ahh apologize yes u r correct.
@@FelixDanGarasiAuto No problem. Good video though thanks for the info.
Dot 4 will cause leaks in the future ! Other Japanese makers don’t recommend dot 4 as they had trouble with it!
Red Falcon have run dot 4 for my other japanese cars for years . It have never cause an issue such as leaks . I think it should be okay.
Red Falcon, so what do u recommend?
Felix Dan gud job on ur video, keep goin, well done! Appreciate ur dedication.
George Aw just stick with DOT 3
I have a Mazda cx3 which I bought in 2015. The owners manual recommend DOT 3 fluid. I would suggest that most Mazda's would have the same including the cx5. DOT 4 has a higher boiling point than DOT 3. Check out the owners manual before you bleed your brakes.
Size
what part do you need the size ?
nice ,do you also bleeded the clutch ?
Nope i did not do the clutch as i have an auto .
Felix Dan alright ;)
Hey Felix ,
I thought the Mazda had a diagonal brake system , which means RR/ FL and RL/FR should be bleed together.
The correct way is always begins from the furthest from the master cylinder.
@@FelixDanGarasiAuto But if I put the car on jackstands and open for example the RR bleeder and the other person is pressing the brakes pedal, you can rotate the RR and FL but the LR and FR you can't move , which means it's a diagonal system, right?
In this case it would be also better to bleed them in this order or not ?
@@felixdada4416 correct. The RR side will be able to rotate. Other wheel wont be able to.