If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
I have no clue how to fit the radiator to be honest. When I slide it over the front two bars it is not flush with the VM screws. I have a gap of 4 mm. The bars are bend a little, are they supposed to be this way? No matter how i place them it is no nice fit. Any ideas?
@@WorldofWayneUK I could have sworn you built the Eleanor. I could see you now; "Build the Gone in 60 Seconds, The Eleanor!" I'm going to build this for a friend, looks like I'm going in blind! 😵💫
I wonder if Agora will release the 'streamliner' version that was used at high speed tracks like Monza and Rheims. The chassis would be exactly the same but the bodywork would enclose the wheels with a few struts to hold it in place. There again, they could issue the Moss/Jenkinson sports car version in which they won the Mille Miglia at a record average speed of almost 100mph. The chassis would be wider to accommodate the two seats but essentially use the same engine, gearbox and brakes.
Hello Sir, I have built the model. I have a problem with part 16H. Oil Hose. It is a manifold with small hoses and a thick hose. In the description I can't see where the thick hose is attached. Can you help me sir? Greetings
lovely build Wayne bit of advise can you clean your cloths after you have done your build then put in airing cupboard for following day lets the side down LOL
Hi Wayne, aka, Mr. Plural! Lol Oh, oh, It looks as though the left torsion bar @27:41 snapped off while fitting the cockpit floor. Thought you'd get that one by ole Lou! No problem though, Mr. Fixit to the rescue! 😁
@@WorldofWayneUK - It truly is! Learning to properly utilize its various thicknesses available makes it even that much more versatile! It's cool also that it is so valued (the fumes) in forensic science too! Great stuff it is.
I was wondering just like Lou about when I was going to start receiving my packs of the Mercedes build. I also haven’t received the first pack of the Optimus Prime build yet. 🤷♂️
@@WorldofWayneUK unfortunately I won’t be here to see it until I get back. I have to go to Tennessee for a unknown amount of time. My dad isn’t doing well.
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
Like video
Wow looking awesome shame you don't get free drivers for these car builds ??!! 👍👍💞💞🍺🍺🚙🙏🇦🇺🇦🇺
did you say the front left that look more like the rear ? that look more like the left rear ?
@William Trask - Be nice, I think he is working through sleep deprivation.
Hi Wayne, what sizes of screwdrivers are you using please? Great channel BTW 😊
Wera PH0
Apart from having all the metal spokes what is the difference between the wheels? (why is a different tyre used?)
The tyre are actually the same. The spokes look much nicer and thinner then the easy made ones
Could you please let me know where I can acquire the 4 rims, easy and wired wheels. Please advise me
Thank you
They come with the kit
I have no clue how to fit the radiator to be honest. When I slide it over the front two bars it is not flush with the VM screws. I have a gap of 4 mm. The bars are bend a little, are they supposed to be this way? No matter how i place them it is no nice fit. Any ideas?
the bars are meant to be bent yes. it takes some pushing. make sure you put them in the correct holes in the frame
Hey Wayne we’re you by chance going to be doing the fanhome mustang Eleanor?
No. I did the Supersnake and it’s very similar
@@WorldofWayneUK I could have sworn you built the Eleanor. I could see you now; "Build the Gone in 60 Seconds, The Eleanor!" I'm going to build this for a friend, looks like I'm going in blind! 😵💫
😂😂😂😂was just thinking strange to get video on Sunday then realised its Monday 😂😂😂I’m getting old that’s my excuse
@MasterLemonLime - I have found that excuse is good for many things! Who says there is nothing good about getting older! Lol
D'oh!
I wonder if Agora will release the 'streamliner' version that was used at high speed tracks like Monza and Rheims. The chassis would be exactly the same but the bodywork would enclose the wheels with a few struts to hold it in place. There again, they could issue the Moss/Jenkinson sports car version in which they won the Mille Miglia at a record average speed of almost 100mph. The chassis would be wider to accommodate the two seats but essentially use the same engine, gearbox and brakes.
Hello Sir,
I have built the model. I have a problem with part 16H. Oil Hose. It is a manifold with small hoses and a thick hose. In the description I can't see where the thick hose is attached. Can you help me sir?
Greetings
I can't remember that
I load a video up to RUclips to show you sir.
Hello,
Are the wheels from metal or plastic?
Metal
Parabéns está ficando top!!!
Che spettacolo 😻 ⭐⭐⭐⭐⭐ Amazing Video... Grazie🫶
The details and colors on the engine parts are incredible. What a great looking model Wayne.
It's a fantastic model. I look forward to the sequel.
Beautiful model loved the tartan seat 😂😂
I was wondering if I was going to get my Mercedes Monday...
RUclips was playing up
Today and not processing the video. I had harsh words with it. Seems to have worked.
@@WorldofWayneUK i've been there before
Good video nice build thanks lee
I don't like the American expression BACKSIDE! It is the BACK! And there are pegs not nipples! Drives my Autism and OCD etc up the wall!
Picky, picky, picky.
lovely build Wayne bit of advise can you clean your cloths after you have done your build then put in airing cupboard for following day lets the side down LOL
I think those clothes are long past saving lol
Hi Wayne, aka, Mr. Plural! Lol Oh, oh, It looks as though the left torsion bar @27:41 snapped off while fitting the cockpit floor. Thought you'd get that one by ole Lou! No problem though, Mr. Fixit to the rescue! 😁
Yep. Superglue is a wonderful remedy
@@WorldofWayneUK - It truly is! Learning to properly utilize its various thicknesses available makes it even that much more versatile! It's cool also that it is so valued (the fumes) in forensic science too! Great stuff it is.
I was wondering just like Lou about when I was going to start receiving my packs of the Mercedes build. I also haven’t received the first pack of the Optimus Prime build yet. 🤷♂️
Optimus should be this week
@@WorldofWayneUK unfortunately I won’t be here to see it until I get back. I have to go to Tennessee for a unknown amount of time. My dad isn’t doing well.
@@JohnDrumm not good. Keep well John
They should do the a team van in the same scale