Это видео недоступно.
Сожалеем об этом.
What's the Difference Between Parallel and Serial?
HTML-код
- Опубликовано: 10 авг 2017
- At first, parallel connections might seem like better ways to send data - so why are most modern interfaces like USB serial?
Visit www.tunnelbear... and start your 7-day free trial today!
Techquickie Merch Store: www.designbyhu...
Techquickie Movie Poster: shop.crowdmade...
Follow: / linustech
Join the community: linustechtips.com
Leave a reply with your requests for future episodes, or tweet them here: / jmart604
3:32 I too install my GPU while my house is on fire.
Son:DaD THE HOUSE IS ON FIRE!
Dad: Hold on i'm building a PC
Dad takes his own sweet time, checking all of the components, debugging, while everyone around him panics, running around like mad.
Suddenly, dad sees an error. He grows suspicious.
"this is fine"
He gets engulfed in flames, and hes like, "hold on, i'm playing the witcher 3"
That brings back nightmares about removing IDE cables. You couldn't pull the cable itself because it could damage it, which meant pinching both sides. When you finally got it loose, your hand would slingshot out and you could cut yourself on the sharp edges that used to be in cases.
Not to mention all the dust that gets trapped with those wide ribbon cables. I've seen some real nasty stuff build up in there.
Am I the only one who has never had this issue?
@@qwertykeyboard5901 Either you're too young to have dealt with it, or you had some of the nicer IDE cables that had attachments for pulling on to avoid injury.
You guys should do a collab with LinusTechTips
Hah
Mr Tom Waffles [COD Mapper] Wat they already are
or Taras kul
That's the joke..
Mr Tom Waffles [COD Mapper] that would be lit bruh, why hasn't that happened yet?
My sister heard you talking and said "Is that bob the tomato from veggie tales?"
He does kinda sound like bob from veggie tales actually...
LOL! It's close, but I think Linus' voice is a bit too high and squeaky to be Bob.
.....i never fucking thought about that....OH DAMN HE DOES?!!!!
Sean Ramey #
Hey, this comment was in the latest "mean comments" video on LTT
I loved the machine gun/shotgun analogy. Genius!
Should've been machine gun vs line firing
he forgot about 19th century multi-gun/barrell... weapons (pre-mg's)
I like that, Gabrocki, but I like the video of machine gun even better! LOL, a gun spitting out numbers! He did a great job editing that!
But oh yeah, Red Power Ranger, you have a good point there!
That was for the Americans in the crowd who until then had no idea what was going on.
gabrocki literary was
about to comment that like a second before he said
Serial the parallel killer.
LOL
Manmeet Singh how can one kill in parallel anyway
@@togwam Maybe dual wielding?
@@qetzyl9911 not very parallel
Sorry, but saying "USB got one data line in each direction" is false.
USB 2.0 and lower only has D+ and D- as signal lines, but this is a differential pair. Meaning, that it basically carries the same information at the same direction at each time (half-duplex), but the signals are the inverse of each other to block outside interference.
From USB 3.0, the cable got two more pairs for each direction (SuperSpeed tx/rx), but the old pair is still there to make your statement false and to confuse everyone.
3:33 explaining clock recovery encoding protocols like 8/10 might be relevant for future videos, as it helps viewers understand how high speed communication work without a dedicated shared system clock between components. Also useful for understanding why 1Gbit=100Mbyte.
Other relevant topic: Could be interesting to also cover the actual pins on a cable, e.g. USB, Ethernet, SATA, and wtf they actually do, and cover differential signaling and how it reduces interference problems.
let's all eat cereal at the same time so we can be parallel.
and no, it doesn't all have to be the same cereal :)
Brolivia Wilde I got the cinnamon toast crunch
Ba tum tss
Serial*
Haha, Brolivia!
@Williammc10 CoaCoa Crispies :)
Did he drop a Threadripper already?
jayz two cents dropped one instead
Mahmood Mohanad Ltt replied “dropping stuff is our thing@
2 days ago
concise, well thought out, and well written. Keep up the good work, whoever wrote this episode and did the animations!
the difference is that cereal is a food you silly goose.
I didn't watch the video but if lyonous makes a joke about cereal I'm suing.
He did at the end🙂
I hope leonardus has good lawyers
Why not watch the video, Eprepp?
seriously an awesome video man! studying right now for my embedded miscroprocessor systems design class right now and you are motivating me to study!
3:32 tfw you forge a pc in a dying star
Dude! You have one hell of a RUclips channel. That energy is exciting. I appreciate what you offer in learning- fun graphics and easy to understand. Keep up the great work.
American way, use guns to explain stuff
I KNOW, THEY ARE CANADIANS
They are all british, kinda... xD
I thiuguht that's the Russians way XD
Thanks very much! Been trying to wrap my head around this for a while and I am glad I found your video!
Future Video suggestion:
Subwoofer types... the subwoofer must be on the floor or on the table/desk?
Why not under the desk or why not on the table?
Does the subwoofer speaker design matters? and why?
Can the vibration damage the computer components, ex: hdd, ram, etc.?
3:26 "Isn't THAT parallel?" 😅
"I wouldn't bother trying to eat your bowl of frosted flakes one at a time." ..... Challenge accepted!
Automatic machine gun? as opposed to one of those bolt action machine guns?
perhaps in contrast to the gattling gun or metal storm.
There's also the pump-action machine guns, he's just trying to be specific
Nate I can't tell if you're joking or not
Gattling guns are non-automatic machine guns
thenoobcannon
Well, I suppose a machine-gun is just a gun that operates by using mechanisms for reloading, ejecting, and whatnot instead of needing the input of a human every step of the way.
And automatic is a general term I suppose, so he's not that incorrect.
So long as it functions by itself without someone having to baby it every step of the way I suppose it's automatic, and if it does that with mechanisms, it's a machine.
I dunno, though.
What was burning the background of the video card install? Did someone try to overclock the Threadripper?
Maybe...or just Satan changing or installing his computer's GPU
I needed ALL OF THIS ENTERTAINMENT. Reminds me of how engaged I was watching Bill Nye the Science guy as a kid. He made me fall in love with science and you make learning boring info easy.
You didn't mention the speed of chipset meaning there was a limit to baud that each chip could interpret the data in serial. It was cheaper to put them in parallel and feed the more expensive CPU that way than to buy a chip fast enough to talk in serial at the same speed. It wasn't until these chipsets became more powerful and less expensive that serial was able to take over. It also helped that we were reaching limits with parallel speeds anyway due to the aforementioned crosstalk, etc.
This video had a few good points but was marred, and it could confuse people. Had you simply mentioned _"parallel to serial compression"_ (like USB) requiring (a chipset) doing processing of it, it would have cleared up the "magic" mystery of why and how people managed to get from the data rates of parallel to those of serial. The pay-off and trade-off would start to dawn on them because it isn't "magic". You could then have simply "name dropped" Fourier mathematics, and then people could at least look it up in a book or online. There was a reason parallel existed (high data rates and also acting as the first GPIO), and yet form your video people could walk away thinking serial should have only ever been the way forward and that somehow there was no hurdle to get the benefits of parallel into serial. You don't even have to "explain" the complicated stuff. Just "mention" the word and then people can have a look.
The notion of pins being prone to damage is *not* an argument against parallel when comparing to serial. Not only can you wire to (and thereby adapt) the shape of something else like an rj11 or rj45 connector for a parallel (so the size and pins can be smaller), but also a serial (e.g. a great big RS232 null modem cable) can be about the same size as a parallel printer cable.
A lot of serial communication stuff is clock and data ( i2c , i2s, spi) and usb is NOT receive and transmit, but Data+ and DATA- , one wire is inverse of the other... same for other things.
The only Linus content that is worth watching anymore
In my 12 years in IT at a company i have seen more sata and USB ports broken than IDE, Paralels and COM ports
Dito, just 25y :)
well 12 years ago was in 2005 and USB was basically already the standard and SATA was gaining popularity over IDE. That and with IDE there was always a chance that the pins would bend if you didn't pull the cable out exactly at 90° and it was a huge chore to bend them back. Which, although it usually doesn't require IT assistance, is still a pain in the ass.
Same
But remember that most companies have old hardware and it takes time to upgrade everything, we still have some Compaqs with P2, P3 and P4 runing(those fuckers wont break) they are used in deposits and cargo bays to show some stuff, so is not necesary to upgrade them for now
you dont usually remove parallel ports as often. thats why most of the external parallel ports have screws and screwholes and the internal ones are, well internal and not plug and play. if you were to plug an IEEE 1284 connector into a port multiple times a day it would break in no time. but usually you don't actually remove or insert a plug a whole lot.
Linus thanks for helping me learn lots of stuff daily. Hailing from Nigeria as me and my buddy watch you all the time
TechQuickie, explaining the *LATEST* tech!
I'd love to see Linus try to build a DOS Gaming PC.
Linus, could you explain the difference between Fiber connections (SX, LC, ST ; Maybe even direct dopper and SFP/+) and Multi Mode and Single Mode ?
USB does not have one data line in each direction. USB uses differential data signaling, this means that one data line can be mapped to 2 physical wires, one being D- and the other D+, so when one wire goes high voltage, the other goes low voltage. Differential signaling allow serial communications to be faster because they are able to send data with lower voltage swings without being affected by ambient noise. As for the clock it goes embedded in each data signal and is reconstructed by the receiver.
Parallel will catch up and out perform serial eventually. Sure crosstalk is a problem with ribbon cable but twisted pair advances along with proper shielding can offer more bandwidth along with TDMA style data synchronization and other transport level data timing matching technology.
Shoving that GPU in sideways at 3:30 gave me goose bumps
You took a funny example with the soldiers. Made my evening today.
Hey Linus, since you are talking about all those different ports, I was thinking about you making a video about firewire. It was said that it was faster than a usb 2.0 back in the day.
Thank you so much Linus in helping me digest Serial I/O.
great visuals to help. thanks for your content.
This brings back memories from when PC parts were more expensive, and repairing parts was more common rather than disposing of them, and delicately straightening those bent pins on drives, cables, and motherboards.
Speaking of pins, I still have a large jar full of gold CPU pins that I used to extract from junked PCs. I should smelt that down into a gold bar sometime.
You are King Linus! Continue with the good work !
The shotgun comparison was nice.
Great video! :)
I would find it very interesting if you could do a Techquickie on computer component power consumption, particularly that of CPUs and GPUs and what constitutes it. What does the electricity actually do inside the components - what is it needed for? Also, the GTX 580 from around 7 years back and a modern GTX 1080 Ti both have similar power consumption yet the difference in performance is, of course, absolutely massive. Similar trends can be seen on CPUs as well. What has allowed these huge advancements in power efficiency and can we expect this trend to continue still as time passes on - is there still much that can be done to improve power efficiency? Where are the physical limits as to how low power consumption could be dropped in the future for a given level of performance (a certain amount of FLOPS)? Also, how are CPUs used on mobile devices and laptops able to achieve such low power consumption ratings despite still being fairly powerful?
It would be very interesting to learn about these things! All the best to the whole team and thank you for making these videos. :)
Fun fact: Australia's first computer, CSIRAC, used a serial bus for moving data around internally. This was back in the late 1940s, when 2000 valves and 1000 IPS was impressive.
Fun fact: You can get a PCIe x4, 8, 16, etc card working in an x1 slot by either sawing the extra pins off the card or cutting open the PCIe connector on the motherboard. I had to do this once, to get a video card to work in a PC that only had 1 x1 slot remaining. (The x16 slot was occupied by an HBA.) It worked reasonably well, although the drop in bandwidth/performance was apparent even at the Windows desktop.
DIFFERENCE BETWEEN PARALLEL AND SERIAL:-----
SIR,
YOU EXPLAINED WELL AND I FOUND THE VIDEO USEFUL TO NOTE.
THANKS
VATSA INDIA
thanks Linus, this gonna help me for my Computer Science Exam!
That gun analogy is perhaps the most American way I have ever heard anyone explain serial and parallel.
the Traffic and Machine gun/ shot gun analogy, blew my mind lol.
If only you had uploaded this yesterday. I had an exam on this today :(
3:31 this pci-e video card was FORGED IN THE FLAMES OF HELL
SO MUCH TO LEARN!!!
Good video again well done Linus
I've used a similar example of the rate of fire of a shot gun and its dispersion of the shells loads to a automatic fire weapon, to explain some of the differences to people who don't really get the differences so easily.
i definitely don't miss the days when you had to pin the master/slave etc and when you had to type in all the volume information for a hard drive into the bios, Plug and Play all the way.
This was very well exolained
i'm in love with this channel
Neat video, explains a lot, is very visual and easy to understand :)
Salary bonus for the guy who came up with machine gun vs. shotgun example :D
What's crazy is that SCSI is STILL around. Granted, the switch from parallel to serial in 2004 probably played a big role in that.
Tunnelbear is dooope! I use it on my Mac and iOS, works briliiantly most of the time. Thx Linus for suggesting such a well designed seamless app!
just fyi, IEEE is pronounced "I triple E"
ay
e
e
e
Careful, someone could forget the triple. Then we'd have a catastrophe on our hands.
eye ee ee ee
EEEEEEE (look it up on yt, thank me later)
I like IEEE to be pronounced the regular way better.
Great explanation , thanks
2:31 It is all about sending a message :D
And he didn't even talk about the USB 3.2 standard that add support for parallel datastreams, effectively transforming USB to UPB :o
Was genuinely thinking this video would be about parallel and serial wiring in circuitry.
Good video man I like the machine gun explanation thank you
love that you're giving some props to the legacy stuff~ next you'll be assembling an IBM486 ;) (hey, a girl can dream)
The two USB (2.x) data pins are NOT one for each direction. Both comprise a differential pair of a single data link.
Cool description.
Thumbs up!
Those bear icons are awesome, give my compliments to the guy who has designed them :)
I would say a better comparison would be comparing a minigun to a volley-gun.
If I could see Linus in person.
huge fan btw
from West Bengal
FIRST I WILL GIVE A BIG HUG,THEN I WANT AN AUTOGRAPH ON MY 1ST PC
I have a whole bucket load of what appears to be DB 37 Serial data storage cartridges (predecessor to USB thumb drive by the looks of it, to me at least) and I'm trying to figure out more about them.
I have these because my Grandfather custom built a few barrel organs in his life time, usually barrel organs are analog instruments which use rolls of perforated paper to produce music, my Granps being the absolute 1980s-1990s tech wizard he was, completely rebuilt the guts of the organs, turning them digital. They read MIDI files off of these extremely obscure, dated 37 pin cartridges (I think serial DB 37), the cardriges themselves are totally black plastic, about 3x2x0.75 inches with right angle edges and corners, and absolutely no branding or text on the device other than the hand written labels of what songs are on each cartridge.
Anyway, I inherited all this stuff and would love to figure out more about it all, I'd LOVE to be able to hook up some of these cartridges to modern hardware and see if I can write any custom music to be played on the organ. I'm an actual musician, which is why I inherited all of this, so it would be a blast to give some new life to my Grandad's old project.
Make great great great sense to me! Thank you so much, dude
Question:
Is the layout called a "bus" because it looks like a top-down view of a people sitting on a bus?
I noticed this the other day and wondered if i'm late to the game or...
this helped me out ..thank you
3:14 No matter how many people make jokes on Linus he ain't gonna stop those puns.
I thought crosstalk was between a receiver and transmitter (side by side) wires. Cause the transmitter has much more signal in the beginning of the wire and after some distance (that the receiver's signal is not faided that much) had electrical interference with eachother.
so why does usb 3 and 3.1 usb more than 4 pins? are there moultiple serial sonnections like pcie?
I WAS EATING FROSTED FLAKES WHILE WATCHING THIS AND THAT PUN MADE ME SPIT IT OUT ON MY MONITOR XD
What is lithiom polymer battery, what is lithium ion battery, and so on, I am little confused about all these, please explain to me as fast as possible
Lithium Polymer battery=lithium ion battery in a polymer shell
Please do a video on PCI vs other serial protocols like I2C
great explanation. thanks.
haha liked the Shotgun/MG comparison ;)
My physics teacher clicked on your "How do electromagnets work?" video and instantly clicked onto a "better" video. I told him my boi Linus wouldn't be proud but he didn't care.
It should be noted that there are dual port SAS drives, which have multiple channels, whereas SATA only has one, so that's another part that kind of blurs the lines a little bit, like PCI
a video talking about ipconfig ports would be great
I've noticed some network or server boards still have parallel ports on them (no I'm not talking about serial COM either).
Nothing abaout AGP (Woodo cards). Would like a video about serial PCI then paralell AGP and finally serial PCI-e today. I think that AGP was a super fast parallel port standard for the graphics card?
So a parallel killer is more likely to mess up than a serial killer? 😁
@3:31 "Hey, your room is on fire!" - "Just let me put my pc together first."
Really great video
wow i learned a lot thx man
you took me back eons
So wait if these are so technically different how do ide to sata adapters works? Or does it use a dram chip to store the data and then convert it from serial to parallel?
Why couldn't the parallel standard be improved to allow for the pins to transfer data independently like in PCIe?
Remember it like this:
You can eat serial for breakfast, which is supposed to be quick.
But, you can't eat parelell.
the gun scene killed me!!! no pun intended.........
There are definitely some limitations to standards like USB. Some industrial applications actually do work find parallel connection more reliable if they need a specific thing to be refreshed as quickly as possible. A serial bus really doesn't lend itself quite as well to real-time applications, and a couple of unusual examples would be USB keyboards not having NKRO, and the fact that an SNES controller can be more responsive on the original hardware than a USB knockoff can be on a PC. USB in particular has the limitation of relying on the OS polling a certain number of times per second, where some parallel standards can use straight up hardware interrupts, so the device can tell the computer about state changes as soon as they happen rather than waiting for the next poll. I'm kind of glad the PS/2 ports are still around.
USB keyboards not supporting NKRO is a common myth. USB mice are also not any less fast or reliable than PS/2 mice. USB has matured and evolved enough at this point that the advantages PS/2 once had are pretty much moot.
USB has 2 data lines, but has one data stream. :D
Data lines can work in differential or in single end, the data lines get switch on different USB speeds.
USB3.x has 4 data lines, two pairs.