How to Dismantle Disassemble Drone? SG906 Pro 2 Repair Change Arm Leg Motherboard Body camera Gimble

[@oisin1980]

I broke the front left arm on mine thus evening. I've ordered replacement and because of your video I think I can do it. Thank you so much...

[@BryonGaskin]

That was a ton of work. Glad I switched over to FPV and iNav. My motor burned up. Hopefully it is just a motor replacement and not a full arm.

[@universalinformationentert3976]

www.ebay.co.uk/str/lutoncarparts
drone parts are available in this shop

[@universalinformationentert3976]

ruclips.net/video/Ezr9AalLlWc/видео.html
Best Fireworks Video, with Sound Effects, New Hubsan Zino Mini Pro Drone Night Mode Camera & Flight

[@fahaditvlog2500]

I want to talk with you how can I contact with you?? Can I get your contact number?

[@carpediem_life]

날개교체를 고민중인데 도움되는영상이네요. 감사~

[@fifis101]

Great video. Thank you. Mine went for a swimm, so I'll pull it apart, clean it all down with metho and see if it comes back to life.

[@NathanCroucher]

Great video, looks like 2.4ghz antenna for the drone, is it 5.8ghz for camera? Cant see antenna.

[@128mishka]

Thanks for the video. Is there trick to put those rubber grommets back to the holes ? I’m talking about camera suspension bracket. Thanks an advance

[@TobiasMartinSchwarzer]

i do it with a needle

[@oisin1980]

Great to find the part I need in your shop. Thank you

[@universalinformationentert3976]

Glad to help

[@jordi7367]

Gracias👍

[@SuperBoricua2000]

Does the drone have a receiver card that receives the signal for the remote controller?

[@elcioperesperes9620]

Vc tem , ainda peças sg 906

[@beatrizjaelsoncasalcristao8102]

Boa Noite Sabe me informa Onde tem uma Loja Em São Paulo, que Arruma o Drone No modelo Sg906 pro 2 ?

[@void7573]

Great! Now, how to asseble it back?

[@universalinformationentert3976]

follow the reverse/

[@ΣτελλαΑδαμ]

Hello. I bought the same model and after a few flights it takes blurry photos and videos, do you know what could be wrong? thanks.

[@KrizG]

Hello, good, I have a very big problem and it is that I disarm the camera area, remove the camera from its area, now I don't know how to mount it again, and the few times I have achieved it, it does not turn as it should, it is no longer smooth. as if I have something stuck, please 😔

[@mariopolo1648]

Yo realice lo.mismo.y el.gymbal.me.dejo.de funcionar

[@KrizG]

@@mariopolo1648 estamos en la misma

[@gungarr_scorpio1159]

Maaf bang mau tanya,kalau sensor anti nabrak SG906max beli dimana ya,trimkasih

[@NJUSAWEST]

Muito bom👍👍👍

[@oliviercraonne1806]

Formidable ! Merci

[@WyzWyz66]

hello, I would like some information, and is it possible to put the camera of the F11s 4k pro on the sg 906 max 1 thank you, friend

[@nareshjethwa7662]

It is so satisfy

[@aaronmay6425]

Can you show the wire connections for the gimbal motors on the camera? I had those come lose and I'm trying to map where they go back to.

[@universalinformationentert3976]

too late now, sorry

[@aaronmay6425]

@@universalinformationentert3976 too late, meaning you no longer have the drone? If you still have it, can I give you my email address and have you send me a picture of the connection?

[@universalinformationentert3976]

its in parts, also i am very busy, really sorry

[@argelisvaldez9295]

Donde compro la tarjeta de transmisión de video

[@itallobrandao7052]

And the eletronic board of the arm .
You have a vídeo ? Or diagram ?

[@420polapine]

drone sg 906max2 gimbel repair buleh ka??

[@m3siasz95]

HELLO! SUPER MOVIE. CAN I GET PARAMETERS INFORMATION THE MICROCHIP (6 PIN) IS ON THE GIMBAL BOARD UNDER TWO CABLES (BLUE, RED) THE CABLES LEAD TO THE MOTOR VIEWED FROM ABOVE. MY MICROCHIP WENT SMOKE AND CANNOT READ THE PARAMETERS, I WOULD VERY APPRECIATE YOUR HELP

[@syahiranmodenas4064]

Bos drone ni nak kena tukar barang apa je signal dengan wifi problem ke betul ke pbc antina apa paling ok ye

[@tonycreighton7394]

Where i get it

[@mariopolo1648]

saludos, desde Colombia busco el módulo o sensor no sé cómo se llama del wi-fi del drone gs 906 sufrio un accidente y no quiere conectar al celular gracias

[@야생마-m2o]

짐벌 고정시켜주세요.한국분 이세요

[@gaviaarctica2816]

I have the same drone and i have thinking that connector in the front of drone. Does enyone know whats it is fore?

[@fernandotiani6925]

Are you in Brazil?

[@universalinformationentert3976]

London, UK

[@fernandotiani6925]

Thanks for reply! Would you help me with my SG907 Max…i am having a Gimbal problem, i can send you one video i made yesterday….i cannot find any help in BR, thanks again

[@fernandotiani6925]

ruclips.net/video/ungT-2TQPnQ/видео.html&feature=share

[@fernandotiani6925]

I found a pattern…gimbal stays on for 42 seconds and of for 12 seconds, and the cycle goes on and on…

[@fernandotiani6925]

Off* for 12 sec

[@Paolometaldetectororo]

Volevo sostituire il braccio anteriore ma, dopo aver visto questo video rinuncio😔👍👋👋👋

[@ParveS63]

Vi apnadar kasa ai drone ar frame hobe

[@markrosales3270]

Boss SKn Po sira gimbal pwde koba ipagawa sg906 pro 2

[@wayanwike9085]

Bng ada mainbort kmeranya gk

[@pmagnojr]

Can i use sg906 pro to sg 906 pro2 ?

[@clydewalker6882]

Hi. Does anybody know where I can get my SG 906 pro 2 Worked on..

[@rgamieson]

@@clydewalker6882 me too!

[@RobertKelly-it8wm]

Mine only needs 1 motor , I sent it back thinking they may fit it for me!! Turns out they won't so I ask them to send it back to me I got 3 batteries for it also!!!
Guess they will send it back to me and I have to take it apart and do the install myself !!! Thanks for nothing Bangood you really upset me, this my favoutite drone !!!🌍

[@Gajahmada-oh4fe]

caranya ganti kamera nya gimana BG

[@wayanwike9085]

Ada suku cdng dronny gk

[@rotsentv3165]

Hi! Ser bakit po Ganon tatlo ba ang kamay mo ser

[@tonycreighton7394]

I need a wifi board sg 906 max pro2

[@universalinformationentert3976]

please send me images of board. i think i have in stock. please use whatapp [phone]. thanks

[@420polapine]

hi

[@kennyjoyce6943]

All you see is this guy's big fat hands

[@marcello5199]

And now?...

[@universalinformationentert3976]

:, i am selling parts on ebay, to make better money. :)

[@marcello5199]

@@universalinformationentert3976 bravo!

[@RobertKelly-it8wm]

send it back please and I do the install myself !!! Rob