First part of replacing the entire front suspension on classic 1989 Dodge D100 2WD pick up Chrysler Ball joint socket www.amazon.com... Follow me on IG: autorays_yt
Dodge liked welding ball joints to the upper and lower control arms in the 70’s. My 1979 D100 has welded parts. To remove requires grinder surgery, and a c-clamp with a big socket to push out. Not as difficult to do as you might expect. That wall behind you could be a good spot for a whiteboard for a list of the parts you’ll be highlighting. You’ve inspired me this morning! Good job.
Welding is overkill between old rusted suspension those ball joints were not going to come loose lol I got a whiteboard with a To Do List for each car and the list is never ending cause there’s always something to do with project cars
You had me rolling at the sawzall. New subscriber. Keep up the work. I got an 89 d100 as well with 350000 miles. Got to find time to put some TLC in her.
I know this is a slightly older video, but I’ve got a 89 Ramcharger RWD. I’m not having any luck finding anything online really. I use Rockauto as well for most if my parts. But with the inner tie rod ends, are they the exact same on both sides? I’m getting different part numbers all the way around for outer left and right, but it looks like the same part number for both side inners. I’ve never gone this far into suspension work so Sorry if that’s a stupid question lol
I have a 89 d100 with 102000 miles my grandpa bought new. Bout to start going over it to do the same stuff
Dodge liked welding ball joints to the upper and lower control arms in the 70’s. My 1979 D100 has welded parts. To remove requires grinder surgery, and a c-clamp with a big socket to push out. Not as difficult to do as you might expect.
That wall behind you could be a good spot for a whiteboard for a list of the parts you’ll be highlighting. You’ve inspired me this morning! Good job.
Welding is overkill between old rusted suspension those ball joints were not going to come loose lol
I got a whiteboard with a To Do List for each car and the list is never ending cause there’s always something to do with project cars
You had me rolling at the sawzall. New subscriber. Keep up the work. I got an 89 d100 as well with 350000 miles. Got to find time to put some TLC in her.
Appreciate the sub...I plan to keep my d100 for a long time but its gonna be a while to get up to 350k miles thats crazy
Good job looking forward to part 2…👍🏻
My upper ball joints are threaded , you can see the square shoulders on the joint for a wrench to thread in
Love the build I have a 87 2wd d100 with 87k original miles it’s mint
Appreciate that i'm on the hunt for another dodge truck like the 70s sweptline trucks
I just bought a 86 D100 with a slant six and I'm in love
Yeah great trucks always getting people asking to buy it when I’m out driving
Very well done 👏
Not a strut is a shock, not a breaker bar it's a cheater pipe... Just info
I know this is a slightly older video, but I’ve got a 89 Ramcharger RWD. I’m not having any luck finding anything online really. I use Rockauto as well for most if my parts. But with the inner tie rod ends, are they the exact same on both sides? I’m getting different part numbers all the way around for outer left and right, but it looks like the same part number for both side inners. I’ve never gone this far into suspension work so Sorry if that’s a stupid question lol
For the inner they are different for “Left” and “Right” for moog brand part # is moog-es2120r for right and moog-es2120L for left
Where’d you find this truck ? Can’t believe how clean it is , zero rust
Wife’s nail polish 🤣🤣🤣
Ware you ordered ? I have 1990 I need too get exactly what you have in the video
all came from rockauto
Put a link for the parts
Everything came from rockauto
😴