The Tetra Max Ryz Tournament comes with site tapes past 150 depending on your set up. It offers a 2 pin slider for the UV3 2 pin sites & others. The dial wheel is the best available! Hopefully you can give this one a try
Welcome to the HHA family. Ran them WAY back with their original Optimizer and now have gone full circle after running BG. Currently run their TT w/Bowfinger and TMax (4pin). Cheers
I just switched to an HHA Tetra Max RYZ from a BG Accent Mountain Lite. I am glad I made the switch. From what I can gather the sight tapes that HHA uses for the tetra max and ryz are interchangeable. If you use the #47,48 RYZ tapes they go to 130 yards.
Ive always used hha. Went different directions at times. But have always come back to hha.. now i run the ultra veiw scope with the hha. Best in the bis.
Awesome video Dan. I purchased the HHA RYZ two pin setup with my UV3 XL. Such a wicked setup. I plan to use it for hunting and 3D. Glad you finally tested this setup. Keep up the great work buddy.
That's basically what I am running this year. Mathews v3x33, hha tetra max, uv3xl single pin 0.010 with 4x lens. Still iffy on the magnifier on the tape, if you look at it at different angles you can be a tic or two off on your tape. Probably be better once I get use to it a little more though. I do like the ability to swap out a dial for different setups and overall ease of getting a sight tape on vs my old fast eddie xl. On the uv side, I'm loving the ability to swap between cartridges for tac vs hunting setups. Makes life a whole lot simpler to tinker with things and try new setups when everything is modular like that.
Really nice sight Dan Sorry to see you and Tim go your separate ways but life goes on Really enjoy your content and will continue to watch and subscribe until I don’t lol Good luck JimR
RYZ definitely will get you going further with that second pin, love both the Tetra-Max and RYZ!! HHA Sports is a great company, great people, and awesome quality products!! Like you mentioned other wheels for different arrows, and more can be purchased if needed, slick system and I find it very intuitive... the dial on the outside I tend to prefer, but looking forward to your thoughts once you shoot it a while!!! Keep the great videos coming!!
I’ve been waiting so long for this video. Check out they should have some long range tapes out to 140 as well. I got the Ryze model which is their 2 pin equivalent to the fast Eddie double pin. Great review.
great to see HHA being tried out. been shooting mine for a couple years and love it! Im going to try and get the RYZ for the 2nd indicator pin, and the 120 yard tape.
My local shops don't carry the HHA stuff, looks nice! The ring swapping is sweet. I like to run a plain white sticker and make pencil marks until I'm confident in it. Then compare those marks to the pre made tapes to find the one I need. I use those spot hogg long range tapes on everything now so 125 yards is an option (clearance doesnt alway allow it).
When getting marks for a sight tape, you should try a like a 1" horizontal line on a target and a vertical line for lefts and rights. You could always do a bigger line depending on how good you can hold but I find this method get's a very accurate tape. Just allows you to float along the lines instead of having to worry about centering everything.
Just custom ordered this sight in a 3 pin. .19 top 2 pins and .10 on bottom. Cat wait to get it in and set up. HHA makes amazing product and they were awesome. Custom order literally only took 5 minutes
I’ve shot various models from black gold and spot hog over the years. I Finally tried out HHA tetra tournament 4 pin and it is absolutely my favorite hunting sight. I’m looking forward to possibly tinkering around with some ultra view heads.
Love my hhas I have found the magnifier on the dial is awesome for target shooting but I usually run the pin for hunting as the magnifier looks slightly distorted thanks for the awesome content!!!
I run the RYZ 2-pin version. Best sight in the industry IMO. I have a dual track on my backup bow and its great but the HHA went on my V3X 33 permanently after shooting both back to back for a while.
@@hoganfan2006 i am not certain. But if the pins measure up the same as the indicator pins on the HHA it should. Also i think the only difference between the UV3 and UV3XL is the sight window 30mm and 41mm. I would however contact UV. They are a bunch of good people with tons of information in regards to their scope and the HHA sight
Dan if you went with the HHA Tetra Max RYZ you would have got the extended sight tape. With my V3X at 75 pounds 31” draw 440 grain arrow my sight tape went out to 165 yards.
What I feel is one of these best features of the HHA when used in the Bridgelock is HHA’s offset bracket is WAY up at the second axis. Which means the majority of the weight of the sight is still in line with the riser and ONLY the weight of the scope is moved horizontally!! What’s the point you ask? So many sights have offset way back and nearly all the weight is shifted outside which essentially the same as mounting the sight on the traditional way. This feature is never talked about and appreciated!! Dan get a RYZ frame for that UV3 two pin. I own this set up and the entire RYZ with the RYZ scope. Both are nice but the HHA fibers are at least twice as bright. UV needs to figure out a brighter upgrade. It’s really poor without the light on!!
@@ElkShape Thanks Dan...it's something that is commonly overlooked with the Bridgelock craze. I really like the BL's sights in my P4 and X29 to stay streamline and the HHA and the Landslyde (with a 31mm scope) are the only two that I know of that have this option. I have a Redline Torch on order and this is "supposed" to have enough windage built in...we shall see. Hard to beat the HHA RYZ with their double pin scope or the UV3 scope 2 pin and the two pointers on the RYZ frame. The simplicity of the sight tape setup AND being able to easily swap the set up wheel to one OR more yardage wheels based on multiple arrow weights is GOLDEN!!!!! You can have one sight on one bow with a two pin setup and only two wheels to have a hunting setup or a TAC/3D setup. BOOM!
That New Marsupial Bow Case Tho 👁️👀👁️ How you liking that?? I wanted to pull the trigger an get one but low key wanna see one in person first, looks legit as Fawwwwwk tho 🤙🏽
If you had to rate the decked system on a scale of 1 to 10 as far as its durability and toughness, what would it be. (I'm not an affiliate. I'm just asking before I purchase one myself)
He sees the light. Love my kingpin with 3 pin head. I run three different arrows, the extra wheels are money. I also run my sight close to the riser too, I cut off the extra because I don’t enjoy carrying dead weight around either😂.
You can change sides with the arxos if I'm not mistaken. So although we love the vids Dan why is it every other video there is a new sight you going with. Curious if anything works for you for at least six months.
Both are great sights, I’ll take a tetra over a landslyde any day though…..if for no other reason than that I can hide the fiber optic coil when I need a light….glowing fiber optic wraps tend to make animals nerveous.
Hot light and hard shadows but I can see you. Poorly lit commercial videos have me lose interest quickly. This one kept me for almost 50% of it. Great concept. Thanks for sharing.
Finally an HHA up in here!!! One of the best in the business.
Hey I know you..
Dude, stoked you keep pumping out videos! You keep posting and we will keep watching!
Can't stop, Won't stop! -DS
I've had an HHA Optimizer Kingpin Lite for 6 or 7 or 8 years and it is still perfect.
I'm extremely hard on my equipment too.
The ryz comes with long range tapes but they have them on their site for separate, they go out to 150 if your bow is fast enough. HHA gang!
Yessiree - ordered!
-DS
The Tetra Max Ryz Tournament comes with site tapes past 150 depending on your set up. It offers a 2 pin slider for the UV3 2 pin sites & others. The dial wheel is the best available! Hopefully you can give this one a try
Already talked to HHA - long tapes inbound, dual indicator coming... HHA is impressive! -DS
I have the ryz. I love it only thing I might have changed is would've maybe went with .10 instead of .19 other than that the best.
It’s the Tetra Max RYZ Tournament 2 pin. Ultraview sells just the frame for it, which includes the 2 pin indicator for the sight tapes
Love my HHA with UV3XL. Glad to see you in board!
Welcome to the HHA family. Ran them WAY back with their original Optimizer and now have gone full circle after running BG. Currently run their TT w/Bowfinger and TMax (4pin). Cheers
Great video Dan and Jake! Appreciate you guys keeping the content flowing. I felt like the production quality was just as good as ever.
Thanks bro! -DS
I just switched to an HHA Tetra Max RYZ from a BG Accent Mountain Lite. I am glad I made the switch. From what I can gather the sight tapes that HHA uses for the tetra max and ryz are interchangeable. If you use the #47,48 RYZ tapes they go to 130 yards.
Ive always used hha. Went different directions at times. But have always come back to hha.. now i run the ultra veiw scope with the hha. Best in the bis.
Absolutely love HHA! Currently have a 3 pin HHA optimizer Lite and I love it! Definitely can’t beat the build quality or the price!
The white after market cartridge ring for the UV3 really helps you lock that peep around the scope.
Looking forward to getting the Tetra Max RYZ to try out !
Awesome video Dan. I purchased the HHA RYZ two pin setup with my UV3 XL. Such a wicked setup. I plan to use it for hunting and 3D. Glad you finally tested this setup. Keep up the great work buddy.
That's basically what I am running this year. Mathews v3x33, hha tetra max, uv3xl single pin 0.010 with 4x lens. Still iffy on the magnifier on the tape, if you look at it at different angles you can be a tic or two off on your tape. Probably be better once I get use to it a little more though. I do like the ability to swap out a dial for different setups and overall ease of getting a sight tape on vs my old fast eddie xl. On the uv side, I'm loving the ability to swap between cartridges for tac vs hunting setups. Makes life a whole lot simpler to tinker with things and try new setups when everything is modular like that.
Agreed - swapping out cartridges is something all sights should think about offering! -Dan
Really nice sight Dan
Sorry to see you and Tim go your separate ways but life goes on
Really enjoy your content and will continue to watch and subscribe until I don’t lol
Good luck
JimR
Word! Thanks. -DS
I bought the UV3xl double pin and HHA adapter for my Tetra Tournament last week and I love the shit out of it so I’ve been waiting for this video 🤘
Boom! -DS
RYZ definitely will get you going further with that second pin, love both the Tetra-Max and RYZ!! HHA Sports is a great company, great people, and awesome quality products!! Like you mentioned other wheels for different arrows, and more can be purchased if needed, slick system and I find it very intuitive... the dial on the outside I tend to prefer, but looking forward to your thoughts once you shoot it a while!!! Keep the great videos coming!!
Love my HHA Tetra dude!
I picked up a RYZ in January. After a few months of shooting with this one it’s going to be hard to beat.
I’ve been waiting so long for this video. Check out they should have some long range tapes out to 140 as well. I got the Ryze model which is their 2 pin equivalent to the fast Eddie double pin. Great review.
Same! Just sold my SH when this came out.
Love my HHA!! Awesome review.
great to see HHA being tried out. been shooting mine for a couple years and love it! Im going to try and get the RYZ for the 2nd indicator pin, and the 120 yard tape.
gonna do that fo sho! -DS
My local shops don't carry the HHA stuff, looks nice! The ring swapping is sweet.
I like to run a plain white sticker and make pencil marks until I'm confident in it. Then compare those marks to the pre made tapes to find the one I need. I use those spot hogg long range tapes on everything now so 125 yards is an option (clearance doesnt alway allow it).
When getting marks for a sight tape, you should try a like a 1" horizontal line on a target and a vertical line for lefts and rights. You could always do a bigger line depending on how good you can hold but I find this method get's a very accurate tape. Just allows you to float along the lines instead of having to worry about centering everything.
Just custom ordered this sight in a 3 pin. .19 top 2 pins and .10 on bottom. Cat wait to get it in and set up. HHA makes amazing product and they were awesome. Custom order literally only took 5 minutes
Love all my Hha sights not sure what edition you got but my tetra rye max sight tapes go all the way out to 185
Great video. I have been on the hunt for a Landslyde but given I can’t find what I want, I am going to give the HHA a try. Thanks for the content!!
I’ve shot various models from black gold and spot hog over the years. I Finally tried out HHA tetra tournament 4 pin and it is absolutely my favorite hunting sight. I’m looking forward to possibly tinkering around with some ultra view heads.
The tetra max ryz is a double pin and has long range sight tapes
I would like to see a in depth video on shooting in the 3rd axis. What is a good minimum start yards and angles?
You guys are killing me with these sight videos…just take my money already
Nice bow case…but I didn’t realize you could shoot CB Bolts in the phase 4 🤣😆😂
Love my hhas I have found the magnifier on the dial is awesome for target shooting but I usually run the pin for hunting as the magnifier looks slightly distorted thanks for the awesome content!!!
Agreed! -DS
Does the magnifier on the dial come with the sight? If not, where would you get something like that?
Hey Dan, the Tetra RYZ sights ship with tapes that go out to 180. 😀
How about a 300 yard tape? JK! -DS
My HHA Tetra Ryz Max kicked both the Axcel Landslyde and Dialed Arxos to the curb.
He sold me on the 2nds sight tape wheel...fuck ya TAC arrows and hunting arrows no more redoing tapes!
I can’t stand Spot Hogg sights, but love HHA sights. HHA for the win for me.
I run the RYZ 2-pin version. Best sight in the industry IMO. I have a dual track on my backup bow and its great but the HHA went on my V3X 33 permanently after shooting both back to back for a while.
They have long range sight tapes that you can buy separately that go to 150 yds
Tetra Max/UV3 combos is legit AF!! My man got’em a big boy garmin watch!? Heyyyy!💯
Indeed!!! The watch is money!!! -DS
Dude people in Wisconsin love hha
Don’t let Joel hear you say a heavier bow is a steadier bow 😂
Team, in Just over two weeks, I'm going to chase Elk in New Zealand's deep south........ With a bow!! An HHA Tetra max sight is what I'm using 😉😉
HHA Gang! The Tetra Max RYZ’s dual indicator pins on the slider matches up to the UV3’s dual pin. Also one of the best warranties you can get. 😎🤙🏽
Does it also line up with the UV3XL?
@@hoganfan2006 currently wondering the same? hunting cartridge
@@hoganfan2006 i am not certain. But if the pins measure up the same as the indicator pins on the HHA it should. Also i think the only difference between the UV3 and UV3XL is the sight window 30mm and 41mm. I would however contact UV. They are a bunch of good people with tons of information in regards to their scope and the HHA sight
@@hoganfan2006 Lines up perfectly with all UV 2 pins!
Strage thing is that on Ultraview page they say they are not compatible with any HHA scights :)
Never a real product review unless you throw the box haha great video.
Exactly! -DS
Wouldn’t you need to change your peep sight size when switching from the 4 pin housing for hunting to the UV3 single pin housing?
2nd view! Can’t wait to watch this been on the edge of ordering this!
Love your content & passion for archery. BUT your Videos could use a bit more light. When indoors. Good luck for elk season.
Dan if you went with the HHA Tetra Max RYZ you would have got the extended sight tape. With my V3X at 75 pounds 31” draw 440 grain arrow my sight tape went out to 165 yards.
I might do that! -DS
What I feel is one of these best features of the HHA when used in the Bridgelock is HHA’s offset bracket is WAY up at the second axis. Which means the majority of the weight of the sight is still in line with the riser and ONLY the weight of the scope is moved horizontally!! What’s the point you ask? So many sights have offset way back and nearly all the weight is shifted outside which essentially the same as mounting the sight on the traditional way. This feature is never talked about and appreciated!! Dan get a RYZ frame for that UV3 two pin. I own this set up and the entire RYZ with the RYZ scope. Both are nice but the HHA fibers are at least twice as bright. UV needs to figure out a brighter upgrade. It’s really poor without the light on!!
Steve you nailed it! -DS
@@ElkShape Thanks Dan...it's something that is commonly overlooked with the Bridgelock craze. I really like the BL's sights in my P4 and X29 to stay streamline and the HHA and the Landslyde (with a 31mm scope) are the only two that I know of that have this option. I have a Redline Torch on order and this is "supposed" to have enough windage built in...we shall see. Hard to beat the HHA RYZ with their double pin scope or the UV3 scope 2 pin and the two pointers on the RYZ frame. The simplicity of the sight tape setup AND being able to easily swap the set up wheel to one OR more yardage wheels based on multiple arrow weights is GOLDEN!!!!! You can have one sight on one bow with a two pin setup and only two wheels to have a hunting setup or a TAC/3D setup. BOOM!
Are you going to be at TAC Colorado?
I also find the SH alittle aggravating but some tig ol bitties usually make me just deal with it.
That New Marsupial Bow Case Tho 👁️👀👁️ How you liking that?? I wanted to pull the trigger an get one but low key wanna see one in person first, looks legit as Fawwwwwk tho 🤙🏽
What’s the differences between the uv3 and the standard hha scope ? Why change
If you had to rate the decked system on a scale of 1 to 10 as far as its durability and toughness, what would it be. (I'm not an affiliate. I'm just asking before I purchase one myself)
11 out of 10! I don't even know the folks at DECKED but they make good stuff! -DS
What is the weight of your RIP XV setup?
He sees the light. Love my kingpin with 3 pin head. I run three different arrows, the extra wheels are money. I also run my sight close to the riser too, I cut off the extra because I don’t enjoy carrying dead weight around either😂.
Makes sense to me! -DS
You can change sides with the arxos if I'm not mistaken. So although we love the vids Dan why is it every other video there is a new sight you going with. Curious if anything works for you for at least six months.
Literally just trying to get reps with as many as possible so I can do a final video... more testing! -DS
I like the hha because of the price. Cheaper than the landslide. It's built well and it works
Any chance you will review the redline torch?
Potentially!!!! -DS
How do you like the marsupial bow bag?
It's up to snuff - Marsupial doesn't suck at anything IMO! -DS
@@ElkShape yes, i agree def a fan boy! Still on the fence about purchasing it.
8in back bar?
Question: Can you just buy just the HHA sight mount?
I'll find out! -DS
@Elk Shape thanks
Both are great sights, I’ll take a tetra over a landslyde any day though…..if for no other reason than that I can hide the fiber optic coil when I need a light….glowing fiber optic wraps tend to make animals nerveous.
I thought I was the only one that had problems with my windows from range to range sometimes it changes sometimes and sometimes it does not
Hard to see what you pointing at under them lights indoors
Not a fan of HHA. UltraView scope on a Spot Hogg or Landslyde is the ultimate setup 👍🔥
Hot light and hard shadows but I can see you. Poorly lit commercial videos have me lose interest quickly. This one kept me for almost 50% of it. Great concept. Thanks for sharing.
I don't understand your sentence - but I think you're critiquing the video quality which is awesome - we'll do better. -DS