FASTEST WAY to DEEP CLEAN Dyson V10 HEAD | How to Clean motorhead / turbohead on your vacuum.
HTML-код
- Опубликовано: 28 авг 2024
- A quick 5 minute HOW TO on cleaning the motorhead / turbohead on the Dyson V10 Animal Vacuum Cleaner.
If things are completely ruined, you can always buy a new one: amzn.to/3wg4nMD
Super straight forward, but I'm sure it will save some time for someone who's having to figure it out from scratch.
#dyson #clean #DIY #howto 
Хобби
Thank you I've been trying to figure out for over a year how to get that bar off, without breaking anything because it seemed to be stuck. I really appreciate the help.
Glad I could help!
Thank you for sharing this. The torque head on mine stopped spinning and this helped me disassemble and get rid of all the buildup that was causing that problem.
Glad it helped
This video makes sense, I learned something, I just bought the dyson V-11 outsize love it, I saw a video about cleaning it this guy took everything apart I couldn't believe what I was seeing he did the motor everything I'm sure they wouldn't make good on the warranty if something happened to it, this guy was an asswipe and I hope no one listened to him, you did it right. I got to explain more, parts that had gaskits , spelled wrong, where no dirt or dust could get to he took it apart. told what screw drivers to use it's unreal what he wanted people to do and by the comments they were thanking him.
Thanks for your comment :) Glad it was helpful :)
It has really been quite useful. Thanks a lot. I really like Dyson products but they could have thought in making them with a simpler way to clean them up.
thanks :)
I’m so glad to find your video, and how easy it is to clean the head. What a difference it has made to our vacuuming.
Glad it was helpful!
Obviously this video is coming to us from the UK, so this advice may not come in very handy, but for those of living in a very dangerous place like the US, it should. Simply use your handgun cleaning rod and some Windex to get the plastic window covering the rotating brush sparkling clean. You can use the rest of the cleaning kit to its best purpose.
haha yes we dont have handguns here
OMG Thank you! That's the perfect tool!!
He’s from Australia. That’s what that accent sounds like! A sensible country where you rightly pointed out normal people don’t have or need hand guns. They do however have snakes and spiders that are 10 times more dangerous!!
You know this guy is Australian and you can own a handgun
There’s also no way I am putting gun oil, and something that is supposed to clean a delicate mechanism, shoved into a dirty Dyson
This was very helpful, thanks! Using the paddle pop stick and wet wipes, was a great idea! I’ve tried damp paper towel but it didn’t work as effectively as the wet wipes seemed to work.
Glad it helped! Unfortunately I think I'm going to need to do this trick again soon!!
Why can’t I just put it under the sink
@@bruh8268 Hi, do you mean why can’t you just run it under water in the sink? That would be a great idea but I think that the centre tube will get damaged because of the water😉
Thx for your practical approach. No others had any solutions, except undo a thousand screws, and the clog of bacteria inside is unbelievable. Poor design really.
Glad it was helpful! I should probabbly do mine again. It's so satisfying getting it clean and running smoothly and efficiently again.
Thank you for this video .I already clean mine and it'is help a lot.
awesome!
I just have one question, is it not possible just to wash it??? It's all plastic, so nothing should happen, right?? Or is it prohibited??)
I hadn't thought of that.. but i'd be cautious with the bearings...
Very informative video!
Before seeing this video, I washed out my vacuum head with water.
Will the vacuum head be OK or is there some sort of battery in there that I got wet?
Thanks!
Did it effect its performance??
@@MiguelMijesPardon the delay. Just seeing this now.
I do not believe it affected its performance. I just made sure to wipe everything down and let air-dry for about 3 days!
nice!
I’m baffled at how much dust came out when you used the popsicle stick 😭 I gotta go see how bad mine is now 😅😂
I know
Using all those wet wipes is probably not the most environmentally friendly method, i used a damp j-cloth with some diluted multi-surface cleaner. You can clean the inside of the rota brush by pulling the end off. There is a bearing underneath which you can remove if you've got a screwdriver with a star shaped head. I passed a string into the opening and tied cloth to other end and pulled it through like cleaning the muzzle of a rifle.
yeh that's a good point. Nice one!
That clear lid on the head is so hard to clean properly, it should be removable
yeh i agree!
Thank so you much. So practical and helpful.
You're very welcome!
😲 mine gets really bad since I don’t clean it that often but usually I’ll scrub the heck out of it with some dish soap, water and a small brush. 😅
that will work nicely!
Omg i washed mine with water.. then i watched your video. Now i hope it will work 😂😂😂 ill try after it gets dry and update my comment..
Keep me posted! I'm sure it will be fine once it dries out
did it work? i washed mine too. waiting for it to dry now 😢
@@elainepatajo7206 did yours work update me i wash main 😢
@@amalmoha5811 hi there. i unscrewed everything and let it air dry for 3 days and fortunately it works fine now.
So is there a star tool small enough to unscrew the tiny screw in the base of the head that would release the spindle to make the final deep clean easier? Great tips thank you
oh excellent! I'll need to give it a clean again so I'll check that one out.
very informative! thank you. I have a problem of pulling the cylinder out, I guess something is stuck there :(
Same mine doesn't come out? I'm wondering if it's different models or what?
This one is the V11 animal turbo head.. came out really easily for me on the first try.. sorry to hear it hasn't worked for you both.
Same here. Mines the V10. The fluffy one comes out easily but this definitely does not want to budge.
Thanks anyway.
Mine was the same, hard to believe how much packed into that end.
gross hey!
I cant get the purple roller to slide out. What's holding it ?
it was just a small screw i twisted with the coin
The grey rubber part along the back is wear and tear parts. And Dyson doesnt sell that specific parts anymore as they want their customer to buy a new head unit once it tear up. Happened to me.
Dyson sucks. And remember they said newer gen head parts not compatible with previous version, they lied.
I would not recommend people buy Dyson. Nowadays many other brands works similiar or much better than Dyson junks.
oh wow I didn't know that...
in was jammed so bad i had to take it apart to get the roller off
:o
its working now
thanks for the help with this most helpful
Glad it helped!
Very helpful…Thanks!
You're welcome!
My daughter accidentally caught a piece of lipstick in ours and the baby wipes did just the trick to get it off the guard. I had to wash the roller brush with dish detergent. Now if only the lipstick came up off the carpet with baby wipes 😩
oh no!!
Thank you
You're welcome
Thanks ❤
You're welcome 😊
The cylinder inside is stuck. If I try to pull it out "nice and easy" the friggin lid (with the coin slit) comes out and the cylinder remains stuck.
I am having the same problem
same here! the cover comes off but the brush stays in place
@@tracywachsner2150
oh no
Thank you that's was very helpful
You're welcome! Glad it was helpful
I don't know why my motorhead doesn't come out like yours...I have v15 detect absolute
sorry i can't help..
Спасибо !!!
thank you
Loosen screws , move top wire and plastic top pops off
SUPER DEEP clean! :)
what kind of tool did you use?
Expensive and difficult to clean
That may be the case, but it does the job really well.
its faster just unscrew that and clean with water
I guess you could do that.. but that dirt is caked on !
Maybe don't do that on a table
oh this table we got from a garbage tip haha.. it's just for outside doing work on