Видео

The spindle falls into tap dont know why?

Great video. Always good when someone gets directly to the point. Thank you. 😀

That clear lid on the head is so hard to clean properly, it should be removable

I just have one question, is it not possible just to wash it??? It's all plastic, so nothing should happen, right?? Or is it prohibited??)

Running the drill in reverse will help keep the nut on.

Thanks, I’m grateful to see how simple this is.

Watched all the videos. Changed the ball cock seal and the seat washer, took care to ensure the seating seal was tight against the inner lumen and the problem continues. I have adjusted the screw in both directions and I also cleaned the cistern surface facing the seat seal. The leak in to the toilet pan has diminished, but leak it still does. The inlet mechanism continues to his and bubble while never shutting off unless I manually lift the float arm the last little bit. I can only think that it might be the water level being too high and flowing in to the overflow but I cannot adjust the screw to produce the desired water level result. I have decided it would be easier to dig a 'drop dunny' out back, so I am off to dig now. Cheers.

This is a year late but please teach her to not heel strike

Thank you for this video .I already clean mine and it'is help a lot.

Dr. ?

2:23 the legs killed me, I thought I was going crazy because of the manual lol. Glad it wasn't just me.

The problem with all barefoot shoes is that they are butt ugly. The Gobi ll is fine for everyday wear but the unstructured look is sloppy.

Nice 👍🏿🙂

Very informative video! Before seeing this video, I washed out my vacuum head with water. Will the vacuum head be OK or is there some sort of battery in there that I got wet? Thanks!

Great job and vlog. After a year, hows the kitchen holding up?

A great day!

How well are they going to hold up to a desert environment? Lots of sharp rocks where we live.

Your daughter is so adorable 😂 thanks for the video bro. This has helped so much !

Either this bloke lives with a man or a short haired woman. My Dyson head looks like a wooly mammoth died in it

I own a pair of Vivobarefoot Primus Lite Knit and my feet ache after standing / walking on concrete or hard floors throughout the day. I do have flat feet, so its possible this is contributing to this but i do feel like the lack of cushioning in these shoes can be difficult for me.

Using all those wet wipes is probably not the most environmentally friendly method, i used a damp j-cloth with some diluted multi-surface cleaner. You can clean the inside of the rota brush by pulling the end off. There is a bearing underneath which you can remove if you've got a screwdriver with a star shaped head. I passed a string into the opening and tied cloth to other end and pulled it through like cleaning the muzzle of a rifle.

I don't know what's crazier. Having the time to create a whole video on how to take an item and stick it in your drill, or the amount of time that 8 million people took to watch this . The world has officially gone to hell

Thank you I've been trying to figure out for over a year how to get that bar off, without breaking anything because it seemed to be stuck. I really appreciate the help.

Going to try this on my hot tub cover. Thanks for sharing this

Awesome video mate. Question some of these trails are not on Trailforks how can I find them ?

I’m baffled at how much dust came out when you used the popsicle stick 😭 I gotta go see how bad mine is now 😅😂

My daughter accidentally caught a piece of lipstick in ours and the baby wipes did just the trick to get it off the guard. I had to wash the roller brush with dish detergent. Now if only the lipstick came up off the carpet with baby wipes 😩

I cant get the purple roller to slide out. What's holding it ?

The cylinder inside is stuck. If I try to pull it out "nice and easy" the friggin lid (with the coin slit) comes out and the cylinder remains stuck.

Thank you

Thank you greatly for sharing your helpful knowledge & skill with us. God bless. 🙏🙏🙏

Thanks ❤

The grey rubber part along the back is wear and tear parts. And Dyson doesnt sell that specific parts anymore as they want their customer to buy a new head unit once it tear up. Happened to me. Dyson sucks. And remember they said newer gen head parts not compatible with previous version, they lied. I would not recommend people buy Dyson. Nowadays many other brands works similiar or much better than Dyson junks.

nice video. i have replaced ballcock and the red washer. but the water does not stop filling in cistern. it has the soud of water going into cistern in very slow flow but you can hear the sound. it looks like the flot is not high enough to push down the ballcock washer. not sure if you have the same problem.

Gday mate brilliant. Getting one myself. I know this is an old video, but could you tell me how you attached computer to desk. Cheers. Ty

I don't know why my motorhead doesn't come out like yours...I have v15 detect absolute

Ha! Just what I needed, thank you :)

What’s that app that your using

Very late but it looks very nice I’m going there today hope it’s nicer

So is there a star tool small enough to unscrew the tiny screw in the base of the head that would release the spindle to make the final deep clean easier? Great tips thank you

Outsole grip in the wet is so bad it’s dangerous they need to do better for almost $300

They are good but much too expensive !!

I found giving it a good soak really helps. Also scrubbing it first then focusing on a slower suction works good

G’day, I’m an ex-pat living in Europe… have a recurrent capsulitis of the second toe, it loves to switch from foot to foot somehow. The pain when it hits is incredible, debilitating. I recently realized that the only shoes that don’t make it worse are Birkenstocks with the hard sole inserts. They look horrible but at least I can walk. So, I have a little question for you, as the capsulitis is giving me a break right now, do you think that it would be safe to try the Primus Lite III shoes? Just for short walks and wearing at work, mostly sedentary. My Lizard sandals, my comfy Geox boots, all my sneakers, all heading for the bin… so I really need an alternative to these Birkies... I’ll go through your review again and try to judge for myself anyways, thanks for now, Rick

Australia gets snow?

Thanks ill give that a go now

Maybe don't do that on a table

Great video with a lot of interesting details. One quick question. Did you have to calibrate the sensor when you first started using it ?

How to take the head apart to throughly clean clear chamber. ruclips.net/video/pJE9Ug9u5M4/видео.html

it's so great to see that these products exist for children. i can imagine they'll grow to have very strong and healthy feet this way.