I'm a 77 year old widow who has just managed to fix my sticky screen door thanks to these instructions, wheels needed a good clean with boiling water and atoothbrush, spritz of WD 40 and its smooth as silk now, best instructions ever
That was it the putty knife. I've watched many videos and my screen door would not come off. Yours is the 1st to help me take off my sliding screen door.
Hi Chris, I have tried using a putty knife, and backed out the tension screws, and still unable to remove the screen door. It almost seems like I need to remove the track, or take apart the whole frame of the screen. What am I missing?
I’d probably suggest damaging that one to get it out and then build a new one that is the right size. Doors unfortunately can shrink because it’s vinyl but aluminum doesn’t so the small tolerances of the door trap it in. If your in Minnesota we could also recreen it in place.
I have been struggling for over a month now trying to get my screen door off to replace the screen. I just cannot get it to the point where I can get the wheels underneath to lift. I'm using a butter knife I've tried it putty knife and nothing will lift them so that I can lift it up and have it come off it's so frustrating
If only you had not done this video when someone was vacuuming or making some other noise that distracted from your demonstration. Did you not hear it?
I'm a 77 year old widow who has just managed to fix my sticky screen door thanks to these instructions, wheels needed a good clean with boiling water and atoothbrush, spritz of WD 40 and its smooth as silk now, best instructions ever
Simple....and to the point, thanks for showing the additional adjustments at the top!
Thanks for your comment glad we could help!
That was it the putty knife. I've watched many videos and my screen door would not come off. Yours is the 1st to help me take off my sliding screen door.
Thank you! I didn't know those were tension screws. I am not a handy person but I followed your instructions and got it out easily.
And, Voila!! Thank you for helping us get our screen fixed.
You are so welcome!
First video I found that explained how to get the screen off the track if there are no tension screws for the rollers!
Glad we could help. Have a wonderful Summer!
I just wanted to say thank you for sharing this video. It was so helpful.
Perfect. Thanks so much. Mystery solved on how it was installed.
Glad we could help!!
Simple instructions and right to the point, great video thanks
This was very good. Simple...and to the point.
Thanks for the video. Easy off. Easy on. I’ll give that a try.
Thank you! Glad we could help!
Thank you so much. Very simple and easy to follow.
Which way to turn the screw s?????????
Hi Chris, I have tried using a putty knife, and backed out the tension screws, and still unable to remove the screen door. It almost seems like I need to remove the track, or take apart the whole frame of the screen. What am I missing?
Did you adjust the top roller? Sometimes those are too tight so loose in the screws on those ones are the top.
@@ScreenMedic Hi Chris, thanks for the quick response. Yes, I have adjusted both the top and bottom rollers. Any other ideas?
I’d probably suggest damaging that one to get it out and then build a new one that is the right size. Doors unfortunately can shrink because it’s vinyl but aluminum doesn’t so the small tolerances of the door trap it in. If your in Minnesota we could also recreen it in place.
@@ScreenMedic thanks again for the quick response. Unfortunately, I'm down in Florida, unless you want to come and visit! Lol
That would be a hefty trip charge :) best of luck.
Thanks man. You helped me out
My pleasure!!
Mahalo for this video. I could finally remove my screen door🤙
Where did u get that HALF umbrella???? We need that. Thank you!
This was at a customers home so I’m not sure where they got it unfortunately
@@ScreenMedic ah. Thank you for responding. I just took off our screen door. Thank you!!!
Nice job!! Thanks!!
Best explained video
Thanks for the comment; so glad we could help
Nice. Quick and simple!
I was ready to give up -- then I watched your video. No one else gave the putty knife tip.
I have been struggling for over a month now trying to get my screen door off to replace the screen. I just cannot get it to the point where I can get the wheels underneath to lift. I'm using a butter knife I've tried it putty knife and nothing will lift them so that I can lift it up and have it come off it's so frustrating
Loosen all the adjuster screws so there is no tension on the wheels. This might be your issue?
Thank you!
Thank you very much.
My pleasure!
good stuff! thanks much
Good
Thanks worked great
Good to hear
Very helpful
Glad we were able to help.
THANK YOU
PERFECT VIDEO!
Thank you very much sir
Glad we could help!
ThNk u 🎉
Thanks so much
Our Pleasure Donna!
Anyone tell you you look like Ron Howard when he was your age?
Actually, I have one other time and I looked up some images and do see the resemblance. Have a great day!
Like it bro
Thank you soooooo much! ❤️❤️❤️
Thank you very much!
You da man!
Thank you!!
what direction do you adjust the screws ?
Clockwise makes the wheels go out more. Counterclockwise will retract the wheels
This only works if the track is not blocked by the extrusion on the front
Good video. Now get off my deck!😁
Thank u
U can't see the wheels on mine
Then if all else fails you can take a hammer and bash the living shit out of it till it pops right out. Works like a charm! 👍
That was about 1:45 too long
If only you had not done this video when someone was vacuuming or making some other noise that distracted from your demonstration. Did you not hear it?
Thank you!