Hi AJay, At my church, we want to send the program out from ATEM Mini Pro to two 4k monitors in the sanctuary and possibly to our social hall. We use VMix to stream. Is the Stream Bridge the best solution for this? If not, what would you recommend?
@@AJaytheCEO Thanks again for taking the time to reply to my response. AJay; I wanted to take the time to thank you for providing all of your Tips & Tricks ... I have been following you for about 6-8 months. Not sure the best way to reach out to you .. One quick question: my church just acquired an ATEM (TV Studio & BM WebPresenter) I connected a camera and separate MacBook via HDMI ... See the Audio Meter active on the ATEM ... but "Can't Hear anything from the ATEM connected to my audio board" .... if I connect my MacBook to the Audio Board I can Hear ... Pastor is getting nervous. and want to go beyond StreamYard & Zoom. (too much info, but I do have OBS & NDI & Worship Express per your recommendation) .... I know I'm missing one small tweak ... but ...*** toooo much info (sorry)
I’ve bought an ATEM Streaming Bridge and already have a ATEM MINI PRO. I may not have done my research well enough but can I stream to Castr but also send the stream to the bridge in an overflow room simultaneously?
From what I've read, your ATEM can only connect to a single bridge. This also means, you cant stream to RUclips or FB at the same time, you have to pick one service. However this is a great excuse to get an Extreme... You can stream to YT for example, then hook your old ATEM mini to the output and send to the Streaming bridge :-)
Ok my question is I have atem mini pro connected to a Imac, but I want to screen my output from OBS or the media player on the atem? I have 1 ptz cam in input 1, laptop in input 2, 3&4 don’t have anything connected. The hdmi out is connect to a external pc monitor to multiview, webcam is connected to the iMac, and the Ethernet. I have another external monitor to the iMac as an extended display. I have an atem streaming bridge to program out the source end of the hdmi to streaming bridge and the other end of the hdmi which is display end connect to 1x8 splitter which is plugged in the input slot and the 4 TVs plugged in the output part of the splitter. So I’m on my iMac working OBS so I’m try to output what have develop on the program side of OBS, I right click to full screen projected it on extended screen not show up on the TVs. Please tell me what I did wrong or how can I get the OBS input on the TVs at my church?? 😩😩😩😩
I would add another usb to hdmi adapter (if the imac supports it) and this will be a 3rd monitor that would be connected to the atem input 3. In OBS selecting full screen projection will now give you the option to use that thirdd output which will show on the ATEM now
Hi thanks for your videos. Can you stream thru the Streaming Bridge AND RUclips at the same time? Is there a way to do that? Also, will the delay will be less if you go directly thru the hdmi out to the tv?
If you want to test out the device, then I'm down. I have an extreme iso and streaming bridge now too. I need to do a test as well.
Cool video man! You forget the web prrsender hd that stream to bridge as well. I think you have one as well. Give it a try.
Will the stream bridge work with a Blackmagic web presenter as well?
I'm not sure but if it did you would limit it to only streaming to that device and not a platform since it can only stream to one destination
Hi AJay, At my church, we want to send the program out from ATEM Mini Pro to two 4k monitors in the sanctuary and possibly to our social hall. We use VMix to stream. Is the Stream Bridge the best solution for this? If not, what would you recommend?
AJay ... do you have audio with the ATEM Streaming Bridge?
Preference of using this device vs NDI NewTek
Yes I do
@@AJaytheCEO Thanks again for taking the time to reply to my response. AJay; I wanted to take the time to thank you for providing all of your Tips & Tricks ... I have been following you for about 6-8 months. Not sure the best way to reach out to you .. One quick question: my church just acquired an ATEM (TV Studio & BM WebPresenter) I connected a camera and separate MacBook via HDMI ... See the Audio Meter active on the ATEM ... but "Can't Hear anything from the ATEM connected to my audio board" .... if I connect my MacBook to the Audio Board I can Hear ... Pastor is getting nervous. and want to go beyond StreamYard & Zoom. (too much info, but I do have OBS & NDI & Worship Express per your recommendation) .... I know I'm missing one small tweak ... but ...*** toooo much info (sorry)
Does it work with the Web Presenter HD
How does this compare to the Web Presenter HD in your opinion?
This does not stream to a platform but allows atems to stream to them. Check out my spring creek videos to see how I recently used these
I’ve bought an ATEM Streaming Bridge and already have a ATEM MINI PRO. I may not have done my research well enough but can I stream to Castr but also send the stream to the bridge in an overflow room simultaneously?
no you cannot
AJ, correct me if I'm wrong but I think the Atem can only stream to one of these bridges, right?
Atem pro or higher
From what I've read, your ATEM can only connect to a single bridge. This also means, you cant stream to RUclips or FB at the same time, you have to pick one service. However this is a great excuse to get an Extreme... You can stream to YT for example, then hook your old ATEM mini to the output and send to the Streaming bridge :-)
Ok my question is I have atem mini pro connected to a Imac, but I want to screen my output from OBS or the media player on the atem? I have 1 ptz cam in input 1, laptop in input 2, 3&4 don’t have anything connected. The hdmi out is connect to a external pc monitor to multiview, webcam is connected to the iMac, and the Ethernet. I have another external monitor to the iMac as an extended display. I have an atem streaming bridge to program out the source end of the hdmi to streaming bridge and the other end of the hdmi which is display end connect to 1x8 splitter which is plugged in the input slot and the 4 TVs plugged in the output part of the splitter. So I’m on my iMac working OBS so I’m try to output what have develop on the program side of OBS, I right click to full screen projected it on extended screen not show up on the TVs. Please tell me what I did wrong or how can I get the OBS input on the TVs at my church?? 😩😩😩😩
I would add another usb to hdmi adapter (if the imac supports it) and this will be a 3rd monitor that would be connected to the atem input 3. In OBS selecting full screen projection will now give you the option to use that thirdd output which will show on the ATEM now
@@AJaytheCEO thank you I will try that.
Hey aj, what do you use to create those cool intros and lower thirds and stuff?
Templates in after effects from Videohive.net
Hi thanks for your videos. Can you stream thru the Streaming Bridge AND RUclips at the same time? Is there a way to do that? Also, will the delay will be less if you go directly thru the hdmi out to the tv?
CAN WE HAVE THE ANSWER TO THIS ANYONE?
No you can't do both