Thank you for watching my video. I will have more in the future. I know you will be happy with how fast and how easily it will be to use the Onefinity CNC. Keep watching for more info and different cuts I make on my Machine so you can understand the oopsy's and the OMG's I have along the way.
Yes thank you for the info. I'm a noob to taking videos. I have already purchased a small tripod to put my phone on horizontally and out of my hands for the cutting shots.
Nice looking board so far. You should show us a completed one in one of your next videos. I am currently waiting for my 1finity to be built and delivered but still have about a month to go. I'm feeling like I made the right choice after watching the few videos out on the web about the ONEFINITY. Everyone says it a huge step above the belt and pulley ones. I'm all new to the cnc router scene and am considering the VCARVE programing for my choice. Any ideas from you would be appreciated. I know you're using Fusion but don't think I'm ready for that serious setup yet. Thanks for sharing your videos and input on the subject
yes the rigidity of this machine makes it easier to go twice as fast. easily twice as accurate as the belt driven machines. I would rate this machine on the same level if not higher then the avid cnc desktop 24 x 24 machine.
Bill Baggins you are the winner of the Jenny and mini Jenny bits. I need to you contact me via my email I sent to you on your youtube channel. If I don't hear from you by Monday June 14th 2021 I will have to pick another winner for these bits.
Best of luck on your health issues and speedy recovery and healing. Quick question, why not use the OneFinity to drill all your holes in the boards now that you have a jig setup?
Thank you so much for your thoughts. My family is getting through this tough times and are doing well. For the question about my jig I make my stock blanks which is the holes and the outside contour. I make about 10 of these at a time per material type and then put them on the shelf. the jig is just for when I get an order and they pick the design they want in the center I can put the jig on the machine and use my center x to locate center and then cut out there design in the middle. If you watch a previous video I talk about How I'm starting to make my stock blanks and I describe cutting only the holes and the outer contour.
You don't even have to find the center of your work piece if use a corner of the jig as xy reference. Just square up jig, use the probe and youll be perfect every time.
Agreed I just didn't set up my jig on same file as my cribbage board. I will have to set the stock material to be my jig size and then I can use the XY. Thanks for the info. I will have many more videos. Check them up, give me your opinion or knowledge is always welcomed.
Awesome vid, just ordered mine. Probably won't get it till end of July unfortunately. I'm Oshkosh area.
Thank you for watching my video. I will have more in the future. I know you will be happy with how fast and how easily it will be to use the Onefinity CNC. Keep watching for more info and different cuts I make on my Machine so you can understand the oopsy's and the OMG's I have along the way.
Just a suggestion, Try holding your phone horizontally so your video will fill the screen on Both phones and computers.
Yes thank you for the info. I'm a noob to taking videos. I have already purchased a small tripod to put my phone on horizontally and out of my hands for the cutting shots.
Nice looking board so far. You should show us a completed one in one of your next videos.
I am currently waiting for my 1finity to be built and delivered but still have about a month to go. I'm feeling like I made the right choice after watching the few videos out on the web about the ONEFINITY. Everyone says it a huge step above the belt and pulley ones. I'm all new to the cnc router scene and am considering the VCARVE programing for my choice. Any ideas from you would be appreciated. I know you're using Fusion but don't think I'm ready for that serious setup yet.
Thanks for sharing your videos and input on the subject
yes the rigidity of this machine makes it easier to go twice as fast. easily twice as accurate as the belt driven machines. I would rate this machine on the same level if not higher then the avid cnc desktop 24 x 24 machine.
Bill Baggins you are the winner of the Jenny and mini Jenny bits. I need to you contact me via my email I sent to you on your youtube channel. If I don't hear from you by Monday June 14th 2021 I will have to pick another winner for these bits.
@@jasonlong30 Jason I want the bits, I just cant find the email you sent with your information so I put my email address in your discussion box
Best of luck on your health issues and speedy recovery and healing. Quick question, why not use the OneFinity to drill all your holes in the boards now that you have a jig setup?
Thank you so much for your thoughts. My family is getting through this tough times and are doing well. For the question about my jig I make my stock blanks which is the holes and the outside contour. I make about 10 of these at a time per material type and then put them on the shelf. the jig is just for when I get an order and they pick the design they want in the center I can put the jig on the machine and use my center x to locate center and then cut out there design in the middle. If you watch a previous video I talk about How I'm starting to make my stock blanks and I describe cutting only the holes and the outer contour.
That’s a brilliant idea Jason thanks for sharing. What software are you using? And best of luck in your recovery.
I use Fusion 360
@@jasonlong30 you use fusion 360 for your gcode creation?
You don't even have to find the center of your work piece if use a corner of the jig as xy reference. Just square up jig, use the probe and youll be perfect every time.
Agreed I just didn't set up my jig on same file as my cribbage board. I will have to set the stock material to be my jig size and then I can use the XY. Thanks for the info. I will have many more videos. Check them up, give me your opinion or knowledge is always welcomed.
Nice video. I’m right in your neck of the woods. Might try to bribe you for tips, if I ever get my machine.
What part of Wisconsin are you located, green bay/Appleton/Oshkosh/Milwaukee, I can always show you if your not that far away.
@@jasonlong30 Green Bay. I'll reach out if I need anything. Thanks!
hello,some music would be nice.
Thanks for the input, I'm new to youtube videos and I will try to get some music added to the spots with no sound.