This is the absolute best explanation I've seen yet! How do the Futaba transmitters compare to the EX-6 and other high end transmitters for the Evo's. I can't wait for the comparison vid.
Love your mini-z passion and helping the community understand all the nuances that aren't always clear with people. I don't live close to the UK but I hope the website launch is going to be smooth and productive! On the topic of transmitters, I don't have a ton of experience like you as I only use the kt-531p and radiolink rc4gs. Recently, I looked into this, but unsuccessfully, whether kt-531p can bind with anything other than ffhs mini-z since I'd really like its compact size for travel.
Yes its always when you discover something new about a car you have that the fun starts.... A simple adjustment and you have a different car... So much fun.
Great video right here. I did hours of research trying to figure out what you said in 13 minutes. Its all a little confusing with all the different models out there.
I’m pretty sure you can also use a lot of the KO Propo transmitters. I use a EX-2 to control my MHS cars and it can switch between Mini Z and regular RC receivers. This is a great video since it’s a little hard to find this info. Thanks!
Hey there, You didn't touch on Futaba and Kyosho use/compatibility.. is that because you don't have those or because they aren't as good as those shown? Side question; my local shop has a mr03 Evo sp.. I'm considering it as my first mini. Will I be able to race and drift it (home use)?
I may be a bit late here but does anyone know of any alternative (preferably cheaper) controllers that can be used in place of a KT-18? I lost my controller a long time ago and I want to get my mini Z running again but I don’t want to break the bank. Anyone have any suggestions?
Looking to buy the Jeep crawler but I'm sorry to see that the throttle isn't as gradual as I would like (seeing various comparos). Looks like I'm looking for a transmitter upgrade to KT432PT to get a custom curve? Would that work to get a very gradual response for low-speed fun?
hi , only the mr03 evo and ma030 evo can bind with nb4 as it has interchangeable receiver chips .the standard mr03 and ma020 cannot bind to nb4 .sorry to hear this . hope this helps .
Late but hope this helps if you haven't solved this issue and I'm sure you have but.. Flysky fs rm005 module allows you to use your nb4 on all of your mr03 and ma02 models
Awesome content.. Definitely subscribing! As for the nb4, those modules are readily available at A Main hobbies online. I got mine under 30 bucks. I just got into mini z (and rc in general) and already hooked..2 cars but both are the rtr versions and tired of lugging around 2 radios. Problem solved! I do hope that you make a vid on this as I had to find that module myself. The tech at my local hobby shop had no idea they existed. Perfect for someone like me that's new to the hobby because it's plug and play.
Hi am new to mini z(and basically the world of RC cars)here. I’m wondering if it’s possible to use other txrx like Futaba or such as the receiver units don’t look like they fit onto any kyosho models. The Kyoshos all look like they use a proprietary chip instead of those receivers bundled with transmitters
I am about to do a video about this . The evo models now other options via 3rd party company . So you can use sanwa , flysky cheaper models other than nb4 .
@@GarageMiniRCUKI will be looking out for this video. I am also new to mini Z (but been doing 1/8 and 1/10 electric and nitro cars) and I am curious if there is a receiver option to use my Sanwa MT12 transmitter. I was looking to get NB4 but if I can use my MT12, it’ll save me money. Thanks for sharing your knowledge.
Exactly what I was looking for! I still have doubts tho. I am waiting for an ma020 (celica wrc) which comes with the KT531, and also have the mr030ve coming. The mr030ve only takes the kt18/ex6r. My question is, can I change the receiver chip on the mr03ve to use the kt432 on both?
I managed to get the jkb86 50th anniversary edition, with brushless and bearings out of the box. It states that it’s only compatible with ASF tx. When I was checking part nos, apparently I would he able to pair it with a Ko Propo ex-rr.. not sure though..
Goto throttle then travel, then highlight where it shows F and change from 100 down to say 50. You can also go up to 150! For punch goto dynamics and change punch
New to mini z. I recently picked up a MS 1 and. Is has no brake it goes straight to reverse. Is there some way to reset or a way to program the break? Thanks
@@GarageMiniRCUK I don’t know what model this is. The servo says MS 1 And the speed control cover says ra 1 .. it came with a Volkswagen bug body and it has an antenna so it’s an old one. I picked up a couple of the new ones and the track me and the Grand kids are going to have some fun.
@@GarageMiniRCUK bought a new transmitter just for the Ma-030 because the kt531p does not fully work with my evo thanks for the info again, but what a dent in my money mini z’s
@@GarageMiniRCUK that’s wild 😛 good stuff.....I’m not at the point where I’m good enough to drift the RWD more hi tech ones yet. Keep up the vids though I don’t think I would have a clue what to do if it weren’t for these vids
Hi garageRC. I have a MA-020, and love it. I am using it to race with friends on a private carpet track. I have the kt531 controller. I am finding the right turning is weak (due to the battery mass on the left I presume...). My question is, are you suffering this issue? And is this issue mitigated at all with the synchro-touch controller? Considering building a MA-3 but since I have a nice sanwa for 1/10 racing I'm tempted to go BZ3 and ditch mini-z due to their awful compatibility with sanwa.
Synchro controller does help as it gives adjustalbe end points and more steering control. If you want to get serious then don't waste time with synchro save the money for a race set chassis like gla or bz3 and go sanwa or nb4.
So overall which is the best one just for the evos, and what’s the difference between the nb4 and kyosho touch screen for this car, which one performs the best
Great video👍🏻 I just subscribed your channel. 😄 I believe Drift44 uses some weights on his Mini Z for precision drift driving. I was wondering if you able to find out D44's Mini Z drifting set up?
For pure performance and not the operating system? Probably ex6r. Its kyosho made so more features for ma030. The synchro touch is simelar to nb4. Hope that helps.
hey brotha how do you make the asf 2.4 ma020 evo change to communication mode so it will except the ics lead ? i talked to kopropo they said i have to put the car in comunication mode to use the ics lead any ideas on how to do this ? they said its in the manual of the chassis page 8 and 9 but i cant find it lol an help would be great !!
If only my man. Life would be sweet. They designed the evo as the first mini z with interchangeable reciever chips. All other mini z esc and receiver are one. Cannot seperate. 😭
I race 1/10th and have been the hobby for years so I know nothing about the minis but wanting to buy one. That’s why I’m asking if you could just buy whatever receiver is in the evo that works with all three transmitters and put those in all your cars?
Oh I get it my bad. So I use the same receiver for those in my non mini z cars yes. So fro the nb4 I have the evo chip and I have micro receivers in my gla that are compatible and I have larger normal receiver in my tamiya tt02. So yes I do use it in other cars, but my other mini z that are non evo are a pain.
I have a nexx racing skyline chassis car with a round yeah racing motor , so far soo good , butt when i hid rails on rcp track , the car bounces back too far Other than not enuff drag brake what can i do , it makes a simple crash into the cost of 3 crashes Thanks in advance for any reply !
It gets worse . Kyosho released a usb add on for nb4 . So you can know use with ma020 and mr03 that don’t have the plug in chip . Also 3rd party mxo make a sanwa chip for the evo versions . 🤣 it’s madness .
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
This is the absolute best explanation I've seen yet! How do the Futaba transmitters compare to the EX-6 and other high end transmitters for the Evo's. I can't wait for the comparison vid.
I'm going to get the Futaba next. It's a good radio, but I've just not needed it. Yes coming soon.
Got to appreciate the NB4 update. Super helpful video! Kind upf frustrating, 1 doesn’t do all, but it is what it is!
Love your mini-z passion and helping the community understand all the nuances that aren't always clear with people. I don't live close to the UK but I hope the website launch is going to be smooth and productive! On the topic of transmitters, I don't have a ton of experience like you as I only use the kt-531p and radiolink rc4gs. Recently, I looked into this, but unsuccessfully, whether kt-531p can bind with anything other than ffhs mini-z since I'd really like its compact size for travel.
I will research for you, Ps I love the radiolink. 👍
@@GarageMiniRCUK Nice and thank you! I think I've watched almost all your videos. GLA with a drift objective sounds awesome. 👍
Yes its always when you discover something new about a car you have that the fun starts.... A simple adjustment and you have a different car... So much fun.
I think there is a kyosho reciever (fhss) that will work in other rc cars(not mini z) that might work with it. I'm looking into it.
@@GarageMiniRCUK Thanks!
Great video right here. I did hours of research trying to figure out what you said in 13 minutes. Its all a little confusing with all the different models out there.
Thanks mate. I bought a few cars then realised not compatible with tx I had.
Finally someone made a complete video 👌🏾
The fly sky noble nb4 has a module you can plug into the tx that will let you use it for all fhss mini z.
Yes. Came out last year. Thanks. I'm tryign to get one.
Congratulations on hitting 1k subs brother!
Same to you dude 😂👍😎
Garage RC it’s funny but I noticed are channels have grown hand in hand. It’s actually really cool 😸
Yes with some strange mystical power..... Has the makings of a TV show 🤔😁
Can I use Futaba 4pm with with RM005 module to run stock mRo3 with syncro? Or is that Kt-432pt only?
I think mr03 runs with synchro as stock . The futaba is for the evos . I’ve not tested futaba yet
I’m pretty sure you can also use a lot of the KO Propo transmitters. I use a EX-2 to control my MHS cars and it can switch between Mini Z and regular RC receivers. This is a great video since it’s a little hard to find this info. Thanks!
Yes you are correct... Might have to make a part 2 🤔👍
Hi, I’m wondering who made the dual side damper for the chassis of the Enzo.
I wish I knew . It’s an old car I got off eBay 3 years ago . I’m guessing it’s an old atomic design
When your transmitter game is on point 💪
Hey there, You didn't touch on Futaba and Kyosho use/compatibility.. is that because you don't have those or because they aren't as good as those shown?
Side question; my local shop has a mr03 Evo sp.. I'm considering it as my first mini. Will I be able to race and drift it (home use)?
I don't have the Futaba but it is, good. The evo sp can't drift. It does race well.
I may be a bit late here but does anyone know of any alternative (preferably cheaper) controllers that can be used in place of a KT-18? I lost my controller a long time ago and I want to get my mini Z running again but I don’t want to break the bank. Anyone have any suggestions?
I think the only cheap option is a used kt18 . Where are you located ?
Very helpful.Thank You
Thanks for the view my friend.
Looking to buy the Jeep crawler but I'm sorry to see that the throttle isn't as gradual as I would like (seeing various comparos). Looks like I'm looking for a transmitter upgrade to KT432PT to get a custom curve? Would that work to get a very gradual response for low-speed fun?
I'll test it out
@@GarageMiniRCUK looking forward to that!
I’m alittle confused. Purchased a mr-03w and a nb4 and I can’t get it to bind. Do I need a different receiver?
hi , only the mr03 evo and ma030 evo can bind with nb4 as it has interchangeable receiver chips .the standard mr03 and ma020 cannot bind to nb4 .sorry to hear this . hope this helps .
Late but hope this helps if you haven't solved this issue and I'm sure you have but..
Flysky fs rm005 module allows you to use your nb4 on all of your mr03 and ma02 models
Yes this works it’s came out a few months after I made this video . I haven’t done video on it yet .
Awesome content.. Definitely subscribing! As for the nb4, those modules are readily available at A Main hobbies online. I got mine under 30 bucks. I just got into mini z (and rc in general) and already hooked..2 cars but both are the rtr versions and tired of lugging around 2 radios. Problem solved! I do hope that you make a vid on this as I had to find that module myself. The tech at my local hobby shop had no idea they existed. Perfect for someone like me that's new to the hobby because it's plug and play.
Can I control mini z MA-020 with flysky nb4 ? The flysky receivers I found is only for evo chassis
You can if the nb4 has the mini z fhhs module or software
Hi am new to mini z(and basically the world of RC cars)here. I’m wondering if it’s possible to use other txrx like Futaba or such as the receiver units don’t look like they fit onto any kyosho models. The Kyoshos all look like they use a proprietary chip instead of those receivers bundled with transmitters
I am about to do a video about this . The evo models now other options via 3rd party company . So you can use sanwa , flysky cheaper models other than nb4 .
@@GarageMiniRCUKI will be looking out for this video. I am also new to mini Z (but been doing 1/8 and 1/10 electric and nitro cars) and I am curious if there is a receiver option to use my Sanwa MT12 transmitter. I was looking to get NB4 but if I can use my MT12, it’ll save me money. Thanks for sharing your knowledge.
Look up mxo racing . They have evo range sanwa rx .
Exactly what I was looking for! I still have doubts tho. I am waiting for an ma020 (celica wrc) which comes with the KT531, and also have the mr030ve coming. The mr030ve only takes the kt18/ex6r.
My question is, can I change the receiver chip on the mr03ve to use the kt432 on both?
If it's the older ve then no. If it's the newer Mr03 evo then yes
I managed to get the jkb86 50th anniversary edition, with brushless and bearings out of the box. It states that it’s only compatible with ASF tx. When I was checking part nos, apparently I would he able to pair it with a Ko Propo ex-rr.. not sure though..
You might if it has mhs? Otherwise ex6 exr or kt18
Brotha I have a awd ve pro 020 paired with a ex -6rR . How do I turn the throttle punch down or the throttle in general ? Thanks remote is confusing
I'll grab mine amd explain.
Goto throttle then travel, then highlight where it shows F and change from 100 down to say 50. You can also go up to 150!
For punch goto dynamics and change punch
New to mini z. I recently picked up a MS 1 and. Is has no brake it goes straight to reverse. Is there some way to reset or a way to program the break? Thanks
Mr01?? Original miniz had no brake.
@@GarageMiniRCUK I don’t know what model this is. The servo says MS 1 And the speed control cover says ra 1 .. it came with a Volkswagen bug body and it has an antenna so it’s an old one. I picked up a couple of the new ones and the track me and the Grand kids are going to have some fun.
So I’m basically not getting the full experience if I’m using the kt531p with my ma-030evo 😞☹️
It's still a very good car. 👍🏽
@@GarageMiniRCUK bought a new transmitter just for the Ma-030 because the kt531p does not fully work with my evo thanks for the info again, but what a dent in my money mini z’s
It's an addiction. I now have nearly 30 cars. Ouch.... . Its an addiction... 😂 But what can we do they look so good....
@@GarageMiniRCUK that’s wild 😛 good stuff.....I’m not at the point where I’m good enough to drift the RWD more hi tech ones yet. Keep up the vids though I don’t think I would have a clue what to do if it weren’t for these vids
Can I bind any non-Kyosho FHSS 2.4ghz transmitter to a Kyosho Mini-Z Buggy MB-010VE 2.0 INFERNO MP9 TKI Chassis?
I'll have a look. Not been asked that before.
@@GarageMiniRCUK the KT531p is so hard to find these days and I’m looking for an inexpensive transmitter for my MB-010VE 2.0 chassis.
I have 2 spare not boxed. Where are you located?
@@GarageMiniRCUK SoCal :)
Send me an email to Admin@garagerc.co.uk let me see what I can do. I'm a bit busy with non rc work today.
Hi garageRC. I have a MA-020, and love it. I am using it to race with friends on a private carpet track. I have the kt531 controller. I am finding the right turning is weak (due to the battery mass on the left I presume...). My question is, are you suffering this issue? And is this issue mitigated at all with the synchro-touch controller?
Considering building a MA-3 but since I have a nice sanwa for 1/10 racing I'm tempted to go BZ3 and ditch mini-z due to their awful compatibility with sanwa.
Synchro controller does help as it gives adjustalbe end points and more steering control. If you want to get serious then don't waste time with synchro save the money for a race set chassis like gla or bz3 and go sanwa or nb4.
So overall which is the best one just for the evos, and what’s the difference between the nb4 and kyosho touch screen for this car, which one performs the best
For me for just the evos I love the nb4. Interface is better than kyosho touch screen. It has the lipo battery built that lasts.
Can I use a kt 531p with an awd ma-030 evo?
Yes if have correct chip.
Kyosho KT 432, Can I adjust gyro setting on the remote when use with MA020 chassis?
Yes for Ma020. It works on older Ma020 sport aswell.
Can the Sanwa M17 be used with the MA 030 EVO if you get a compatible micro receiver and wire it in?
Not as far as I know. 😔
Hello. I have a question. I have a Toyota Corolla 020 mini-z. And I want to buy a kyosho syncro kt 33. Do you recomend itt?
Hi You mean the sychro touch KT-432PT?
Garage RC. No. I mean the kt-331p. For the 020- awd Toyota Corolla
I don't think it's compatible with mini z. It's for the larger 1/10 scale rc. I've got a synchro kt 200 use with tamiya tt02 and that's good.
Ok Thnks for the info 👍🏾🙏🏽😇
Great video👍🏻 I just subscribed your channel. 😄
I believe Drift44 uses some weights on his Mini Z for precision drift driving. I was wondering if you able to find out D44's Mini Z drifting set up?
He's super nice guy. It's an advanced set up. Counter steer set up with anti roll bars. He did tell me. Commented on the Cs drift video I did.
@@GarageMiniRCUK Great! I'll watch yours then. Thank!
Message him on face book aswell 👍🏽
Can i use the absima cr4t on mini z mr03?
Not sure not tested it . What freq is it ?
Hi, is it possible in anyway to use the ex-6r with the mini mp9 buggy or only the kt-432pt as an upgrade.
I will check is the mp9 asf?
@@GarageMiniRCUK Thank you, I just looked it up it says fhss so I’m guessing not.
@@hreuter86 should be able to use the kt432 synchro touch
which is the best transmitter for ma030 evo? I already have noble nb4
For pure performance and not the operating system? Probably ex6r. Its kyosho made so more features for ma030. The synchro touch is simelar to nb4. Hope that helps.
hey brotha how do you make the asf 2.4 ma020 evo change to communication mode so it will except the ics lead ? i talked to kopropo they said i have to put the car in comunication mode to use the ics lead any ideas on how to do this ? they said its in the manual of the chassis page 8 and 9 but i cant find it lol an help would be great !!
I'll be back home tomorrow. I'm sure I have this Manuel. Bro I will do a video on this topic for you.
I appreciate it
is it possible to stll get the kyosho syncro touch?
I don’t think they stock it anymore . It’s not on the kyosho supplier website in the uk .
I guess I'll have to get the FS-Noble nb4 with the module.
I hope to get one at my local shop.
maybe an EVO chassis too.👍
If you get stuck I have those in stock .
Can multiple cars be paired to a single KT-531P transmitter?
I don't think so. I think each time have to repair with new car.
Hi, can I use kt432pt with m03 rwd?
Yes should work depends on how old mr03 is may have to switch modes from fhs to fhss
Is that a black dial ceramic daytona?
👍🏽
For some godawful reason the syncro touch is 400 bucks now T.T no programming the car from the controller for me. :(
Really, that's high. Where are you?
What is the difference between the MR-03EVO and the MR-03EVO SP?
Evo is awd... Sp is rwd race car only not drift
@@GarageMiniRCUK Thanks. For a Drift car, wouldn't Rear Wheel Drive be ideal? Also, which Kv would be best. I was thinking about a 5600kv version.
@@pekwalker For a drift car you need AWD otherwise it will be almost undrivable
Sir, I have Sanwa 11mX 2.4. How can I use this on my mini-z? Thanks in advance!
I will find out for you. Many thanks
I will see if there is a way. 👍
It's not that easy. Unless you strip out the electronics. I've doen a video about it. ruclips.net/video/gh9A2KVf8pc/видео.html
Very informative, bit messy😃
You should see how messy the gla video got once I sorted the servo issue camera in one hand waving all over the place 😂👍🏽
Could you not just buy the EVO receiver and put it in any car?
If only my man. Life would be sweet. They designed the evo as the first mini z with interchangeable reciever chips. All other mini z esc and receiver are one. Cannot seperate. 😭
I race 1/10th and have been the hobby for years so I know nothing about the minis but wanting to buy one. That’s why I’m asking if you could just buy whatever receiver is in the evo that works with all three transmitters and put those in all your cars?
Oh I get it my bad. So I use the same receiver for those in my non mini z cars yes. So fro the nb4 I have the evo chip and I have micro receivers in my gla that are compatible and I have larger normal receiver in my tamiya tt02. So yes I do use it in other cars, but my other mini z that are non evo are a pain.
It's one of the drawbacks of mini z you are limited by what they allow.The gla you can use any radio with a small enough receiver.
Are you shooting on top of some type of “green screen” excellent video btw
Yes I am, its a new trick I've learnt, only issue I had was my camera stand moving. But I have that fixed now. Thanks 👍
Is that a genuine Rolex watch?
Thank u !
Drive me nuts , so ex6r wont do fhs cars
Yep . It’s asf or mhs
I have a nexx racing skyline chassis car with a round yeah racing motor , so far soo good , butt when i hid rails on rcp track , the car bounces back too far
Other than not enuff drag brake what can i do , it makes a simple crash into the cost of 3 crashes
Thanks in advance for any reply !
I found using lower gearing helps with braking . Try Turing up reverse exp on radio too
I will just change out the radio gear.
I've done 2 videos on this. Good luck. 👍🏽
ruclips.net/video/lngfW_YvPEU/видео.html
ruclips.net/video/gh9A2KVf8pc/видео.html
Ok I may have got mixed up these videos are for changing radio in mini z sorry.
Hh
Extremely confusing
It gets worse . Kyosho released a usb add on for nb4 . So you can know use with ma020 and mr03 that don’t have the plug in chip . Also 3rd party mxo make a sanwa chip for the evo versions . 🤣 it’s madness .