Glitter HTV (Heat Transfer Vinyl) Pressed onto Paint
HTML-код
- Опубликовано: 12 сен 2024
- I’ve been nervous about trying this because Glitter HTV backing or the carrier sheet is very very sticky and gets more so when heated - I was sure it would lift the spray paint right off. Turns out I was wrong! Yay for being wrong 🥳😅 I’ve done various experiments in the past to test using a heat press to apply glitter HTV (Heat Transfer Vinyl) onto a tumbler. And because of that, I hadn't tried it... yet! So it's finally time to see if that's a legit concern, or if you can press glitter HTV onto a spray painted tumbler, then remove that really sticky backing without ruining the paint job in the process.
Buy my tumblers here:
www.etsy.com/s...
and
Buy my tumblers in my Facebook group:
/ luxinda
Buy Luxinda MERCH here: bit.ly/3WLCYgy
=====Ways to help and support my channel or any other RUclipsr's channel=====
==Like a video, share a video, subscribe to the channel
==The "Super Thanks" button directly underneath the video (where the like 👍 is, then to the right -- look for the 🤍 with a $ in it) allows you to directly support your favorite RUclips Creators.
==Become a valued member of my channel by clicking the JOIN button just below the video (no obligation at all!)
==www.buymeacoff...
My Amazon Storefront*:
www.amazon.com...
MATERIALS USED IN THIS VIDEO*:
KS Resin Liquid Stone Ultra UV: bit.ly/2N4JX3i (Coupon Code "LuxSwirl" for 5% discount)
MAKERFLO 20-oz skinny tumblers: bit.ly/3FJsIyR
Rustoleum 2X matte spray paint: amzn.to/3HsU1yF
MEFINE glitter HTV: amzn.to/3v2yJ5n
HitPrex portable tumbler press: amzn.to/3Rql2XK
Dragon art: bit.ly/3RkSyPr
504 glitter: bit.ly/3A1AIdB
==Other Materials I prefer*, with Discount Codes:
WOODES GOODIES, 10% discount on most items use code "Luxinda":
www.woodesgood...
MAKERFLO tumblers: bit.ly/3FJsIyR
NEATO printable vinyl: bit.ly/3lHM9hw
T-REX alcohol inks: bit.ly/3J7hODc
FOILS & adhesive: bit.ly/3o4AwDJ 10%Discount "Luxinda"
APS FOIL CLUB link here: bit.ly/3WMyCq3
ZURI silicone molds: bit.ly/3w84kSZ
A-Sub sublimation paper: bit.ly/3fdO8uw
Koala products: bit.ly/3dQXwUM (code "luxinda")
Hiipoo waterslide paper: bit.ly/3quMCaR 10% code "LUXSWIRL"
or on Amazon: amzn.to/348G6hz
Hiipoo sublimation paper: amzn.to/3R3jOAy 10% code "LUXSWIRL"
Hiipoo sublimation ink: amzn.to/3C9ri0J 10% code: 4JEC46CV
* As an Amazon Associate I earn a small commission from qualifying purchases, at no extra cost to you.
#dragontumbler #glitterhtv #tumblerpress #glittertumbler
Luxinda (Cindy) Deskins
PO Box 974
Ranson, WV 25438-4974
Lux.Tumblers@gmail.com
** Efforts I Strongly Believe In **
Getting plastic out of our oceans -- teamseas.org/
Emergency food relief -- wck.org/
Music in this video:
So dare I try a full wrap version??
I was thinking this good be great with 1 of those crazy wrap templates.
Yes please do a full wrap!! That turned out amazing!
Absolutely
👍🏼
Absolutely do a Full wrap
I gotta say, I love the dragons and the black background! Turned out perfect!
Thank you!!🐉😊
Oh wow!!! The possibilities are endless doing it this way!!! Thank you for sharing!!!
Thank you!! Glad it was informative 😊😊
Ohhhhh I love dragons! It turned out so gorgeous! Learned something new and love the result. ❤ Great job Thank you for sharing as always. 👍
Thank you very much!!😊😊
That’s a pretty awesome cup! Turned out fantastic Cindy!
Thank you!!😊🐉😊
absolutely gorgeous !! I love 💕 the dragons on the black cup. Fantastic just fantastic tumbler. Thank you
Thank you!! 😊🐉✨
Absolutely love the dragons!!! This cup is amazing ❤
Thank you!!🐉😊🥰
This came out absolutely gorgeous Cindy! 😍 Full wrap would be interesting. Love the dragons
Thanks very much, Gail!! 😊😊
@@Luxinda you're very welcome Cindy 😊 ☺
My son would love that cup!! He has always loved dragons!!
Dragons are wonderful 🐉🐉😊
That came out really pretty. I recently did a wood burnt dragon piece that is glittery and glows in the dark.
Thank you! Oooh, sounds beautiful 🤩
Ooooo LOVE 🐉 that’s gorgeous 😍 thank you for experimenting. And I think a full wrap would be amazing too ❤awesome job 👏🏽 stay blessed love 🥰
Thank you!!!😊
Fantastic and another Fabulous Technique for toolbox. Awesome Cindy!!
Thank you!!😊😊
That is so gorgeous!! I happen to love dragons, and my high school mascot was a dragon.
Thank you!! Dragons are pretty awesome 🐉🐉😁
Oh Cindy This Cup turned out Absolutely Gorgeous I’m going to try this on a cup I messed up and hopefully mine will turn out beautiful as well Thank You For Doing This
Thank you!!! Hope it turns out great! 😊🐉
That Dragon Tumbler Turned Out AWESOME !!! I Absolutely LOVE IT !!!! I Want To TryOne Just Like That. You Make It Look So Easy !! Just Found Your Channel And I'm Glad I Did ... You Now Have A New Subscriber !!! Thank You
Thank you so much 😀 Welcome to the channel!!
Love this tumbler. You are so creative. Thank you for such awesome tutorials 😍
Thanks so much!!😊
That came out amazing. Absolutely gorgeous.
Thanks very much!😊🐉😊
Looks great glad it didn't lift the paint good to know!
Thanks! Yes, I was very happy that worked!!
That turned out amazing love the dragons
Thank you!!😊😊🐉
Absolutely stunning and beautiful ❤️❤️❤️
Thank you!!😊
This is STUNNING!!!!!.. love love love it.
Thank you very much!!😊😊🐉✨
Very cool! Thanks Cindy 👏😊👍
Thanks for watching!😊🐉
Absolutely gorgeous!
Thank you!!🐉✨😊
Absolutely gorgeous thank you for sharing👏👏👏
Thank you!!😊😊
Love this tumbler!
Thanks!!😊
Absolutely stunning
Thank you!!😊😊
absolutely stunning!!!!!!!!!!!!
Thanks very much!!😊🐉
Love this can't wait to do this for sure ! Thank you
Thank you!! Have fun!😊🐉✨
I wonder if you could use heat spray paint like the kind used for engines and grills if that would change the wait time. I love the silver dragon. It would be a nice butterfly or skull rose cup also. Great inspiration again!!
It probably would shorten the time some. The last video where I opted *not* to press onto a spray painted tumbler because the backing is SO sticky after pressing, a number of viewers suggested using the high-heat grill paint. I was going to try that but realized it would be limiting for a lot of people, especially anyone who wanted backgrounds other than black. So I decided to try just waiting instead like I did here. This way you know that any spray paint color should work 😊
Love this. Great job.
Thank you!!😊🐉
Oh that is sooooo cool!! I love it!!
Thank you!!😊🐉😊
Beautiful thank you for sharing 😍
Thank you!!😊🐉
Thanks!
Thank you!!😊
Very cool!!
Thanks!!😊😊
What kind of resin do you use for your tumblers? Which one is your favorite? You always make such beautiful tumblers!
Thank you!! I’ve tried a lot of different resins, and the brand I prefer is KS Resin. I use their Liquid Stone the most and to a lesser extent their Art Resin bit.ly/2N4JX3i (Coupon Code "LuxSwirl" for 5% discount)
I also recently discovered a really nice all-purpose resin that’s quite inexpensive, from Honest Epoxy Resin (they sell on Etsy) Honest Epoxy Resin Clear Guard: ($5 off with code: luxinda) bit.ly/3LMhRr1
Love absolutely love!!!!
Thank you so much!😊🐉
Very cool 😎
Thank you!!😊🐉
Very Awesome.. who makes the 504 glitter....? Hugs Sheryl 💙🎨💙
Thank you!!! That glitter is from Mr. Nola's. Here's a link to it: bit.ly/3A1AIdB
I don’t have a cup press. Do you think a regular clothes iron would work?
It should, just make sure you’re applying heat all over the htv area. I’ve even seen some tumbler makers apply htv with just a heat gun (although it seemed very fiddly). I would just suggest you do a small test with your iron and see how it works.
Absolutely love this but I am partial to dragon's. 😁
Thank you! 😊😊🐉✨