How To Install: Mishimoto 2006-2010 Chevrolet /GMC Duramax 6.6L Performance Radiator
HTML-код
- Опубликовано: 2 авг 2024
- Product page: mishimo.to/23LOo76
Facebook: / gomishimoto
Twitter: / mishimoto
Instagram: / mishimoto
Mishimoto, the world leader in performance cooling products, shows you how to install the Performance Aluminum Radiator for the 2006-2010 Chevrolet Silverado/GMC Sierra w/ 6.6L Duramax engine!
The engineers at Mishimoto designed this radiator with all aluminum end tanks, fully TIG welded to a 100% brazed aluminum core. This ensures added protection and cooling power to keep your Duramax running cool!
Model Number: MMRAD-DMAX-06
2006-2010 Chevrolet/GMC 6.6L Duramax Aluminum Radiator Installation Instructions
PARTS LIST
(1) Mishimoto Aluminum Radiator
TOOLS NEEDED
PICK TOOL
¼” DRIVE RATCHET
¼” DRIVE RATCHET
EXTENSION
7MM SOCKET
10MM SOCKET
11MM SOCKET
13MM SOCKET
15MM SOCKET
3/8” DRIVE RATCHET
3/8” DRIVE RATCHET
EXTENSION
8MM WRENCH
10MM WRENCH
1 1/8” WRENCH
POP-CLIP PLIERS
LINEMAN’S PLIERS
FLATHEAD SCREWDRIVER
COOLANT
COOLANT FUNNEL
Disclaimer
• Please dispose of any liquids properly.
• Allow vehicle to cool completely prior to attempting installation.
• Mishimoto Performance (MP) is not responsible for any vehicle
damage or personal injury due to installation errors, misuse,
or removal of MP products.
• MP always suggests that a trained professional install all
MP products.
• Do not run the engine or drive the vehicle while overheating.
Serious damage may occur.
• Raise vehicle only on jack stands or on a vehicle lift.
Download the full installation guide for MMRAD-DMAX-06 to learn how to install your 2006-2010 Chevrolet/GMC 6.6L Duramax Aluminum Radiator.
Download here: lib.store.yahoo.net/lib/yhst-6... 
Авто/Мото
Great video
My 07 just cracked while towing with only 182k on it. Looking into getting yours.
What kind of sealant do you guys use for the lower radiator hose ? I just removed my oem one and notice white stuff on the fitting and hose side.
No sealant should be required on this hose. What you are seeing might be lubricant used to get the hose on or dried coolant.
@@mishimoto could be, thanks for reply
when is Mishimoto going to make a radiator for the 2500HD gas(6.0) model?
What year?
Can you do this for the L5p?
Feel free to send your year, make, and model with product suggestions to support@mishimoto.com. Thanks!
do you have an instruction video like this for the LML?
Right here! ruclips.net/video/ebxHtpgG4_Q/видео.html
what "pop-clip pliers" do you recommend? Link maybe? Thanks
Hey no no! The panel clip pliers in this video are not made by genius tools - many companies make them, and there are a ton of different styles. They're called push-pin pliers, pop-clip pliers, panel-clip pliers etc...here's a few links you can check out:
KD Tools Push Pin Pliers: shop.advanceautoparts.com/p/kd-tools-push-pin-pliers-kdt3729/25980469-P
GENIUS TOOLS Clip Remover: www.amazon.com/GENIUS-TOOLS-Entferner-230mm-AT-TPR/dp/B001FVWOWK
They also make bent ones for tough to reach clips!
Mishimoto Automotive thanks! Btw - I'm hoping to hear back soon. I'm near your DE shop and have an LMM :) I replied to the ad looking for a test mule for the trans cooler.
What's the name for the radiator fluid for my 2008 Chevrolet Silverado 2500hd, turbo diesel 6.6L. ?
Hey Joe Rosales . Looks like the factory recommend Dexcool on these vehicles. Our Mishimoto liquid chill would also be fully compatible :) ://www.mishimoto.com/liquid-chill.html
.
Why would you need a new radiator? My truck never even gets warm..... stock radiator is awesome on my truck.
Some customers tune their trucks for racing or live in warmer climates that require additional cooling.
Plastic tanks tend to crack and fail over time as well.
My lml rad cracked on a 65 degree day. Plastic sucks. Just depends if you are lucky and get a good one. I didnt that's why I am here lol.
mine cracked at 416k miles lol