Just came back from The Woodworking Show in Timonium, MD. The folks who make Drillnado were demonstrating and selling their new bandsaw dust collection system which is very similar to yours, except their dust collection cavity is less than half the size of yours which allows easier access to the lower guide and thrust bearings and they are using a 1-inch hose for maximum suction velocity. Charging $50 (show price was $40). You get 3 (6 if you buy at the show) magnetic templates which mount under the table, a plastic adapter which is the dust collection cavity and adheres to the table via two magnets and a length of one inch diameter hose. Since we have been wrestling with this problem for awhile, we bought the new system. Had I seen your video two days ago, we wouldn’t have. Nice elegant idea. Thanks.
At first I thought you were going to put magnets in the holes and stick it to the table top. I was trying to figure out how that would work. Then you stuck it under the table and was like well that's just effing brilliant. And then I was like why didn't I think of that? Great idea!
Is your dust port fitting purchased or leftover from another machine? Cannot find anyone that sells anything like the one you are using which is small and a perfect fit.
You’ve obviously got a 3D printer, why didn’t you just print the laser cut wooden section? Also, what is the laser cutter you used? Someone asked in the comments below a few years back but you didn’t reply. 😊
Oh Joe... it was one of my experiment from 3d printing. I was planned as hose for grinder but then I had changed model and this one remained for waste. I have took it but it can be hose from vac set. I have some useless nozzles from vac.
![Oasis - Oasis Live '25 [Official Trailer]](http://i.ytimg.com/vi/gol_JnuEtKM/mqdefault.jpg)
Just came back from The Woodworking Show in Timonium, MD. The folks who make Drillnado were demonstrating and selling their new bandsaw dust collection system which is very similar to yours, except their dust collection cavity is less than half the size of yours which allows easier access to the lower guide and thrust bearings and they are using a 1-inch hose for maximum suction velocity. Charging $50 (show price was $40). You get 3 (6 if you buy at the show) magnetic templates which mount under the table, a plastic adapter which is the dust collection cavity and adheres to the table via two magnets and a length of one inch diameter hose.
Since we have been wrestling with this problem for awhile, we bought the new system. Had I seen your video two days ago, we wouldn’t have.
Nice elegant idea. Thanks.
That would have to be the best bandsaw dust collection in existence.
If you make a v2, you should put dowel holes under the magnets to line things up and make gluing easier.
Nice little add on for the bandsaw.
Mirock does it again.
Great design.
0:17 so that's how they make Baltic Birch plywood :)
Wow! That was clever! Well done.
Great idea, I think if the ZCI had holes in it, there would even be more air drawn in, thanks for sharing...
No problem to make holes if needed. You are right
This is the best spot to have a efficient dust collection.
Nice project.
PUT ON A SHIRT!!! 😬
Ok)
Perfect tools , the best Idea. Show this to Makita kkkkkkk. Congratulations.
At first I thought you were going to put magnets in the holes and stick it to the table top. I was trying to figure out how that would work. Then you stuck it under the table and was like well that's just effing brilliant. And then I was like why didn't I think of that? Great idea!
Thanks!
Great idea Mirock! 👍👍👍👍👍👍👍👍👍
perfect suction....great project
Thanks for this tip, the best if you have only a small vacuum.
Clever
Very nice!
i’ve watched you a lot, it’s brilliant and pro !! 👍🏻
Excellent idea!
You’re talent is endless my friend
Nicely done!
very good idea, thanks you very much
Bandsaw modification sensation!
Good idea.
Nice job!
Como siempre buenas ideas gracias.
Very smart. Cool!
wow that works really well. great video
Brilliant . . .
well done thumbs up
Ok I'm impressed but where can I get one for my 14" jet band saw
excellent !!!!!!!!
Is your dust port fitting purchased or leftover from another machine? Cannot find anyone that sells anything like the one you are using which is small and a perfect fit.
Bravo idées géniales
You’ve obviously got a 3D printer, why didn’t you just print the laser cut wooden section?
Also, what is the laser cutter you used?
Someone asked in the comments below a few years back but you didn’t reply. 😊
Yes,yes-and-yes...:-)
What kind of laser cutter were you using to cut the layers of wood? Thanks for sharing.
You should post the gcode
Nice work man and thanks for the square I should be getting it soon
Great idea! Can you share where the plastic hose adaptor came from?
Oh Joe... it was one of my experiment from 3d printing. I was planned as hose for grinder but then I had changed model and this one remained for waste. I have took it but it can be hose from vac set. I have some useless nozzles from vac.
Question, what is this for a glue and spray
How do you determine the radius for bandsaw?
STL files? I wanna make this, but I need some files to do so
Awesome. Where did you get the counter-sink tool at 3:08? Thanks
Oh, no link. I is from flee market
@@mirockswoodshop looks cool, never seen one like it before :)
Hi! ,is that a laser you can buy?
great job! What spray do you use after the glue?
Akfix gelled glue. Nothing special usual CA
Since when do you own a laser-cutter and what model?
About year. It is cheap chinese lazer. Nonamed. I almost never use it
👍
what 2 glues did you use?
One. CA glue
Was that suppose to collect the dust? all the dust blew on top of your table and all over the place. Wasted my time watching this!