Hey great video very informative… my wife has a grooming salon and I just recently bought an old treyco CL it’s 16” wheel ? It’s 25 years old roughly it works just fine ,honing wheel has plenty of life on the one side for HG sharpening … I am successfully sharpening my wife’s blades and she’s happy … However it takes me 2 minutes to sharpen the comb and cutter with the automatic arms on the Treyco machine this machine has one speed and is optimized for the automatic arms I believe … would you advise I update to a newer machine … most videos I see with people sharpening, is done by hand like you have done … is this because it much quicker than using the arms … I appreciate any information regarding me getting faster thx Dave
@@davidvarney7353 sorry for the late response. I would say that if you were just doing it to sharpen your wife’s blades, you’re fine with the machine you have. Having the arms on there greatly reduces the learning curve for doing clipper blades. It takes a while to learn how to do them freehand. As a matter of fact, I’m about to add new employees and I just bought an automatic Sharpener myself. If you do want to speed it up, though, you can do like I did an upgrade to a bigger motor...😁
Can you sharpen ceramic blades the same way?? What state are you in?? I'm in New York and need my clippers sharpened (instead of.buying new ones) for my Andis pro clippers with ceramic head... I was just gonna order a new clipper head that all metal as I know that can be sharpened.. what do you think ? Or could I mail this to you and get it done for less than $30 as it's only $28+ tax for a new head.. thank you in advance.. P.S. I looked up sharpening clipper blades and you popped right up.. I hope that helps your channel grow . 😊😊
Sorry I'm just now seeing this. ceramic blades can be sharpened. It’s a slightly different process. I do sharpen ceramic also. You’re welcome to send them to me. I’ll provide a link to my Mail and Sharpening page. Blade sharpening is eight dollars plus whatever shipping is. www.sharpedgesok.com/mail-in-sharpening-service
Love this video. Thanks for sharing. I was looking on Amazon for that scale pen. I couldn’t find it. Any tips where I could find one? What’s the name of the company that made the one you have
How important is it to wire brush your blades after sharpening on the wheel? I have been using the same sharpening guy for years and I always notice when using my Andis t-outliner they drag or won't cut thru fine hair. My guess is after he sharpens, he doesn't remove the burr from the blade.
Burr remove is very important. Anytime you sharpen anything a Burr is created. It's the excess metal from the sharpening process, and can significantly affect the cutting performance. Even causing the blade to not cut even though it is sharp.
Sorry for the late response, YT doesn't notify me of new comments. the magnet is just to make it easier to hold the blade, some people don't use a magnet but I'm more comfortable using one. I use approx. 2 pounds of pressure.
@@queryads1000 I actually make them for myself. here is a link to the magnets i use. Just get some really strong glue or bonding compound to attach them to some wooden knobs that you can usually find at your local hobby store. www.magnet4less.com/neodymium-cup-magnets-w-m4-threaded-male-stud-5-8-inch
@@sharpedgesok He said hello friend. I want to buy a Sharon blade spring forming jig, do you know someone who sells it in your country, he lives in Brazil....
I'm not understanding how the disc being slightly domed affects the grind of the blade? I get that the blade needs to be ground a certain way to correctly cut, but I don't get how that machine is achieving that result. Do you have any insights or resources for me?
Sorry for the late response, here are a couple of videos from someone a lot more familiar with the science behind it all. ruclips.net/video/D48os0Wdwos/видео.html ruclips.net/video/UuwO84NRSpg/видео.html
I purchased a sharpening machine that was mounted in a wooden box. The machine has no marks on so I don’t know who manufactured it. The honing disk is 12 inches in diameter and has a 1/2 inch hole to mount on the motor and one set screw to hold it in place. The disk needs to be replaced. I said all this to ask if you could help me figure out where to get a new disk? Thank you. I would send pictures but I don’t see any way in comments.
@@sharpedgesok thank you for your reply I do not know how to proceed and would like to learn how to do clipper blades for my grandchildren and maybe for the public at the shows
I really am glad I watched your excellent video! It let me know I shouldn't try to do it myself! Thank you!
Your welcome...😁
Nice job and video. Thank you for sharing.
thanks...😀
Amazing Job making this video! You are a punkin!
Thanks so much for this
You are welcome! Thanks 😁
Very interesting please how can buy the machine
Hey great video very informative… my wife has a grooming salon and I just recently bought an old treyco CL it’s 16” wheel ? It’s 25 years old roughly it works just fine ,honing wheel has plenty of life on the one side for HG sharpening … I am successfully sharpening my wife’s blades and she’s happy … However it takes me 2 minutes to sharpen the comb and cutter with the automatic arms on the Treyco machine this machine has one speed and is optimized for the automatic arms I believe … would you advise I update to a newer machine … most videos I see with people sharpening, is done by hand like you have done … is this because it much quicker than using the arms … I appreciate any information regarding me getting faster thx
Dave
@@davidvarney7353 sorry for the late response. I would say that if you were just doing it to sharpen your wife’s blades, you’re fine with the machine you have. Having the arms on there greatly reduces the learning curve for doing clipper blades. It takes a while to learn how to do them freehand. As a matter of fact, I’m about to add new employees and I just bought an automatic Sharpener myself. If you do want to speed it up, though, you can do like I did an upgrade to a bigger motor...😁
@@sharpedgesok Hey thx so much
Much for the reply , mush appreciate it
Great video...One thing that puzzles me is which side do you remove the burr on the comb or cutter?
We remove the burr on both the Comb and the cutter
Can you sharpen ceramic blades the same way??
What state are you in?? I'm in New York and need my clippers sharpened (instead of.buying new ones) for my Andis pro clippers with ceramic head... I was just gonna order a new clipper head that all metal as I know that can be sharpened.. what do you think ? Or could I mail this to you and get it done for less than $30 as it's only $28+ tax for a new head.. thank you in advance..
P.S.
I looked up sharpening clipper blades and you popped right up.. I hope that helps your channel grow . 😊😊
Sorry I'm just now seeing this. ceramic blades can be sharpened. It’s a slightly different process. I do sharpen ceramic also. You’re welcome to send them to me. I’ll provide a link to my Mail and Sharpening page. Blade sharpening is eight dollars plus whatever shipping is.
www.sharpedgesok.com/mail-in-sharpening-service
Love this video. Thanks for sharing. I was looking on Amazon for that scale pen.
I couldn’t find it. Any tips where I could find one? What’s the name of the company that made the one you have
Here is a link to the blade scale I use...😁
hamaguriusa.org/products/clipper-blade-test-scale
I seen many videos about clipper blades sharpening. Can I use sheep blades sharpener for dog clipper ? It is so cheap....
It woukd depend in the taper of the wheel....😁
@@sharpedgesok, I am not a user but curious about it, it is so nice if you try it and make a video for people enjoy it .
Where do I send my Trimmer blades to be sharpened?
@@DCTONY159 sorry I’m just now seeing this, here is a link to my Mail and Sharpening page..😁
www.sharpedgesok.com/mail-in-sharpening-service
ما نوع القرص الذي تستخدمه
How important is it to wire brush your blades after sharpening on the wheel? I have been using the same sharpening guy for years and I always notice when using my Andis t-outliner they drag or won't cut thru fine hair. My guess is after he sharpens, he doesn't remove the burr from the blade.
Burr remove is very important. Anytime you sharpen anything a Burr is created. It's the excess metal from the sharpening process, and can significantly affect the cutting performance. Even causing the blade to not cut even though it is sharp.
How can get this sharpening clipper machine
Contact The Edge Pro for a clipper machine...😁
dear friend i need help. can you tell me what kind of engine it is and what disc it is
That machine has a Baldor 1/2 hp motor, and a 16" disc.
@@sharpedgesokthank you
@@ljubicamihajlovic5606 your welcome
@@sharpedgesok and what can you tell me about the disc, what kind of coating it is or whatever it is as a sharpening base
@@ljubicamihajlovic5606, take time to watch some more videos to know it all.
Does magnet matter and how much pressure
Sorry for the late response, YT doesn't notify me of new comments. the magnet is just to make it easier to hold the blade, some people don't use a magnet but I'm more comfortable using one. I use approx. 2 pounds of pressure.
@@sharpedgesok can you share with me the links to buy the magnets
@@queryads1000 I actually make them for myself. here is a link to the magnets i use. Just get some really strong glue or bonding compound to attach them to some wooden knobs that you can usually find at your local hobby store.
www.magnet4less.com/neodymium-cup-magnets-w-m4-threaded-male-stud-5-8-inch
@@sharpedgesok
Thanks I tried it and it works better than the big red magnets.
Lovely
Thank you
Olá amigo quero comprar um gabarito de formação de mola de lâminas de tosa, você conhece alguém que vende aí no seu país, eu moro no Brasil
I'm sorry I don't speak Spanish
@@sharpedgesok He said hello friend. I want to buy a Sharon blade spring forming jig, do you know someone who sells it in your country, he lives in Brazil....
I'm not understanding how the disc being slightly domed affects the grind of the blade? I get that the blade needs to be ground a certain way to correctly cut, but I don't get how that machine is achieving that result. Do you have any insights or resources for me?
Sorry for the late response, here are a couple of videos from someone a lot more familiar with the science behind it all.
ruclips.net/video/D48os0Wdwos/видео.html
ruclips.net/video/UuwO84NRSpg/видео.html
You forgot to put the black piece back . Where does it go
which black piece?
I purchased a sharpening machine that was mounted in a wooden box. The machine has no marks on so I don’t know who manufactured it. The honing disk is 12 inches in diameter and has a 1/2 inch hole to mount on the motor and one set screw to hold it in place. The disk needs to be replaced. I said all this to ask if you could help me figure out where to get a new disk? Thank you. I would send pictures but I don’t see any way in comments.
Hey Larry, you can email a Pic to me.
sharpedges01@yahoo.com
@@sharpedgesok thank you for your reply I do not know how to proceed and would like to learn how to do clipper blades for my grandchildren and maybe for the public at the shows
Picture on the way
How much warri
I'm not sure I understand the question.
مساء الخير.
so not nail clippers!! ??
sorry, this is for clipper blades for hair clippers
I am a Barber in Africa , my country IS Togo, I want to take this machine, please help mee.
If you want a machine like this one. Reach out to the Edge pro. @theedgepro.com
او الديسك
pos what is the maximum number of revolutions for sharpening the knife thanks
I'm not sure I understand your question. this is about clipper blade sharpening