My dad, who is super savvy with this stuff, just bought be this case and we’re installing everything together. This is SO helpful bc I legit have zero idea what I’m doing. Will definitely be referencing this vid if there’s something we can’t quite figure out. Thank you!
Currently swapping my PC over to the white version of this case. Awesome video! It's great to see everything apart ahead of time so I don't get ahead of myself installing parts
freaking excellent video and build showcase, this covers everything I wanted to know about the case and left nothing out! 5/5*, I am buying artic 10+ fan hub controller and the GPU I am using comes with a sag bracket, my question is if I buy artic p12 max fans can I replace all the stock fans or is that bad idea? because if I am able too, that'll covers all the shortcoming you mentioned in the review!
Absolutely awesome video. I am planning on doing the same thing with this case. I need a bigger one and just moving parts over. You disproved some negatives I have seen in other videos about the clearance on the top with the AIO. Like you said it's not perfect, but I'm ok with that. There are more positives than negatives. Thanks for the video you rock!!
Thanks for the video man.. all angles of this case are covered. I'm thinking to replace my 3 y'old o11 Dynamic XL ROG with this one. The cable management on this case looks way better.
hope that they would make an after market meshed out front panel where in we can install 3 120mm fans or 2 140mm front fans option for the NZXT H9 Flow version! it would make a huge difference and amount of air for front intake air flow!
The top panel clear AIO bracket came cracked with the Kraken Elite 360mm AIO cooler installed. I bought a custom build 4090 Asus GPU, I9-14900K CPU, Asus z790 rog strix E-gaming MB, 4 TB x850s SSD, 1200 watt NZXT PSU. PC came with the top bracket cracked on both sides on rear and front causing the AIO cooler to sag down on the right side. I am returning it and building my own.
Help me, I just received my case, but I have a question: how to connect the stock fans? They have the legend TKG 2510, my motherboard doesn't have that connector, is there a way to use it or not?.
The power button on my case turns my computer on but doesnt turn it off, any idea why this might be? I have the front panel connector secured in the motherboard, the light around the button also turns on so the LED works on it. I also tried to make sure all the connectors were secure on the top of the case, its hard to get a good angle there but they look secure
I am new to PC build. I have ordered NZXT H9 and same AIO for my build. Just one confusion, all case fans are sucking air in, I dont see any exhaust fan.. Am I missing something?
I’ve noticed in other builds of this case they use 7 reverse fans (sides and bottom) and 3 regular fans at the top. Doesn’t this cause too much of a negative air pressure in the case?
@@Renegade_Rabryn oh i didn’t know that was possible, im still in the planning phase of doing my first build. I just assumed reverse fans = reverse air flow
It doesn't beat the Phanteks NV series IMO. I'm not a huge fan of NZXT because of the branding they put on the front of their cases. I just switched to the NV5 and I love it. It shows off my hardware amazingly. As I've said before, I really like this style of video you do. A voice over would make it even better. (I know you lost your voice). But maybe next time.. and your building area has also cleaned up. good lighting, and just over all good quality video. Keep up the great work!
Yeah the NV cases are something special. I'll be back to voicing in the next video. I've got 1 more atx build then a bunch of micro atx cases to build in. Haven't built in a micro atx case in over 10 years.
@lawyerlawyer1215 NV7 is a waste of money unless you are using it for a custom water loop. NV5 fits all the hardware perfectly. With the right fans, air flow isn't a problem. For $100 you can't beat it for being fishtank case. Minimum branding. If anything is buyers justification. It's the damn add on led strips. Now those are way over priced.
@@WilliamHolmes420 the NV5 has the PSY box on the floor, so you can’t get floor fans throwing fresh air up with ceiling fans throwing it out, the ideal air flow direction for most. And most people’s favorite part of fish tank style cases. The way the NV5 is designed, there is no fan directly feeding fresh air to the GPU, it has the disadvantage of fish tank cases, wich is that the lateral fans are throwing the air to the crystal instead of throwing it to the components, without the advantage of floor fans. The NV5 is a literal “I want fish tank aesthetics but I can’t afford a real fish tank case” On top of that, the price isn’t good, if you consider that good fans are around 20$ and the NV5 comes with no fans. So buying 5 fans would add around 100$+ to the price. The NZXT H6 flow has 3 included fans, costs around 110$ , you can put 2 floor fans, and the lateral fans are placed on a diagonal position, so that their air gets a bit more into the components and not wasted on the glass.
@@Ajisdagoat12 you just connect them to 3 pins in my case it was 2,3,4 pin counting from left shape of that connector has to match that little plastic on Mobo
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
If you're on instagram, consider following me: instagram.com/renegade_rabryn
Hi, could you help me ? I'm in doubt between the H9 Flow and the Lian Li EVOD 11 which would be better in your opinion
My dad, who is super savvy with this stuff, just bought be this case and we’re installing everything together. This is SO helpful bc I legit have zero idea what I’m doing. Will definitely be referencing this vid if there’s something we can’t quite figure out. Thank you!
The case and all the parts arrived today. I thought the case would be bigger but it’s the perfect size for my new desk.
Good man. Happy building
Currently swapping my PC over to the white version of this case. Awesome video! It's great to see everything apart ahead of time so I don't get ahead of myself installing parts
i've had the same issue with back panel how did you fix this? 15:26
freaking excellent video and build showcase, this covers everything I wanted to know about the case and left nothing out! 5/5*, I am buying artic 10+ fan hub controller and the GPU I am using comes with a sag bracket, my question is if I buy artic p12 max fans can I replace all the stock fans or is that bad idea? because if I am able too, that'll covers all the shortcoming you mentioned in the review!
Thank you, only video that shows how to open it!
btw, is that a 40 series gpu in the vid? what gpu is that? is there enough room for the front glass not to hit the pci-e gpu front cables?
Great video, helped me with my first build 👍🏽.
Absolutely awesome video. I am planning on doing the same thing with this case. I need a bigger one and just moving parts over. You disproved some negatives I have seen in other videos about the clearance on the top with the AIO. Like you said it's not perfect, but I'm ok with that. There are more positives than negatives. Thanks for the video you rock!!
Thanks for the video man.. all angles of this case are covered. I'm thinking to replace my 3 y'old o11 Dynamic XL ROG with this one. The cable management on this case looks way better.
hope that they would make an after market meshed out front panel where in we can install 3 120mm fans or 2 140mm front fans option for the NZXT H9 Flow version! it would make a huge difference and amount of air for front intake air flow!
I’m trouble shooting my case… NZXT H9 flow.. does the H9 F panel plug from the power button has 9 pins or 4 pins in that plug ?
Thx for the video. It too was very pleasant to watch.
I love that case. Bought one myself
I have a 240mm aio will it work even if there’s a space on the top
The top panel clear AIO bracket came cracked with the Kraken Elite 360mm AIO cooler installed.
I bought a custom build 4090 Asus GPU, I9-14900K CPU, Asus z790 rog strix E-gaming MB, 4 TB x850s SSD, 1200 watt NZXT PSU.
PC came with the top bracket cracked on both sides on rear and front causing the AIO cooler to sag down on the right side. I am returning it and building my own.
Amazing! This video was soo good man
Help me, I just received my case, but I have a question: how to connect the stock fans? They have the legend TKG 2510, my motherboard doesn't have that connector, is there a way to use it or not?.
The power button on my case turns my computer on but doesnt turn it off, any idea why this might be? I have the front panel connector secured in the motherboard, the light around the button also turns on so the LED works on it. I also tried to make sure all the connectors were secure on the top of the case, its hard to get a good angle there but they look secure
Can I put a water cooler on the side of it or a push and pull water cooler on top?
My white nxzt h9 flow case come with a fan bracket on the top. And I own nzxt water cooling. I need help.
That’s an excellent build mate ..👌🏻😊 May i please know which motherboard you used & is it coming with Wifi.
Thanks 😁
Asus strix b550-f with wifi. It's a last gen am4 board with no upgrade path.
17:17 what is anti-sag feature?
For the video card
How is the build quality compared to nv5
Nv5 is better imo
I have a question what are the things that you need to buy for the pc
This was a nice review😊
Glad you enjoyed it
Whats your fan orientation for the top and bottom?
I am new to PC build. I have ordered NZXT H9 and same AIO for my build. Just one confusion, all case fans are sucking air in, I dont see any exhaust fan.. Am I missing something?
bottom and side should be in and hes back should be exhaust. I think hes focusing his build for cpu with the radiator sucking in cold air.
Which motherboard is that ? I really love the look of it
the clean black style is nice
I’ve noticed in other builds of this case they use 7 reverse fans (sides and bottom) and 3 regular fans at the top. Doesn’t this cause too much of a negative air pressure in the case?
Maybe the fan blades are reversed and they are still intake fans on the bottom and the side. I doubt they'd all be exhausting.
@@Renegade_Rabryn oh i didn’t know that was possible, im still in the planning phase of doing my first build. I just assumed reverse fans = reverse air flow
I have my case power cables plugged into the same spot but my LED power button light won’t light up and i can’t turn it off from the power button.
is there room to add SATA SSD's anywhere in the case
Yes. 4 in the swinging door in the back of the case. And 2 more for a total of 6
It doesn't beat the Phanteks NV series IMO. I'm not a huge fan of NZXT because of the branding they put on the front of their cases. I just switched to the NV5 and I love it. It shows off my hardware amazingly. As I've said before, I really like this style of video you do. A voice over would make it even better. (I know you lost your voice). But maybe next time.. and your building area has also cleaned up. good lighting, and just over all good quality video. Keep up the great work!
Yeah the NV cases are something special. I'll be back to voicing in the next video. I've got 1 more atx build then a bunch of micro atx cases to build in. Haven't built in a micro atx case in over 10 years.
How is the build quality compared to nv5
I rather have an NV7 than this H9.
But this H9 is definitely a better case than your NV5 you were just doing buyer’s justification.
@lawyerlawyer1215 NV7 is a waste of money unless you are using it for a custom water loop. NV5 fits all the hardware perfectly. With the right fans, air flow isn't a problem. For $100 you can't beat it for being fishtank case. Minimum branding. If anything is buyers justification. It's the damn add on led strips. Now those are way over priced.
@@WilliamHolmes420 the NV5 has the PSY box on the floor, so you can’t get floor fans throwing fresh air up with ceiling fans throwing it out, the ideal air flow direction for most. And most people’s favorite part of fish tank style cases. The way the NV5 is designed, there is no fan directly feeding fresh air to the GPU, it has the disadvantage of fish tank cases, wich is that the lateral fans are throwing the air to the crystal instead of throwing it to the components, without the advantage of floor fans. The NV5 is a literal “I want fish tank aesthetics but I can’t afford a real fish tank case”
On top of that, the price isn’t good, if you consider that good fans are around 20$ and the NV5 comes with no fans.
So buying 5 fans would add around 100$+ to the price.
The NZXT H6 flow has 3 included fans, costs around 110$ , you can put 2 floor fans, and the lateral fans are placed on a diagonal position, so that their air gets a bit more into the components and not wasted on the glass.
isnt that the elite not the flow? doesnt the flow has a mesh fron panel not glass?
What GPU is that? Very Nice. Thank you.
Just my humble asus strix 4060 I use for these build videos.
Amazing build!
Please tell me I am not the only one having issues with the side panel not going back on?
Can i use 6 fans on the water cooler?
Yes
how come that we dont have a reset button on our H9 Flow?
Holy damn great case but the GPU is bending downwards any fixes to that problem?
A $5-$10 sag bracket lol.
what is the radiator
H9 Flow or Lian Li o11D Evo?
Prob the lian li
cool music from Forsaken 64?
For the sag I’m pretty sure you can buy a bracket
That's the point. Other cases provide a bracket where you don't have to buy one separately.
@@Renegade_Rabryn ohhh my bad then
Underated video
What if my battery is the other way around??
Your battery? Do you mean power supply?
Why did you use a screw driver to loosen a thumb screw? 😂
It’s a great case though - I just built my PC in one. Lots of space!
IDK how to connect fans to motherboar my motherboars fan slots are 4 pins and my fan connectors from H9 flow are only with 3 holes wtf/?
Same
@@Ajisdagoat12 you just connect them to 3 pins in my case it was 2,3,4 pin counting from left shape of that connector has to match that little plastic on Mobo
@@Voltomess thanks for replying but I already finished the pc today
Had issues with the back unless the screw wasn’t supposed to come out
You should be asking why doesn't the GPU come with an anti-sag bracket imo.
Nah, this is a case review video. Other cases offer it, so why doesn't nzxt?
Love the music
I lost my voice the day before making this video 😄 so music and text it is.
@@Renegade_Rabrynit was very futuristic and calming! Loved it :”)
That GPU do be saggin
get your self a gpu stand, put it on the fan, it can take it
how much😅
Nicee
W build
GTA heist music lol
Williams Lisa Clark Timothy Walker John