Links mentioned in video: Fuel Systems Playlist: Carb Service tools I use: www.amazon.com/ideas/amzn1.ac... HSR Carbs/Cables/Air Cleaner adaptor: amzn.to/2VZXrjP Mikuni HSR Owner’s Manual: how2wrench.com/free-resources... How to replace HD Intake Seals: • How to install a ... How to tape throttle position: • EM Series: How to... AUX Fuel Tank: amzn.to/2sylEQE Contest-How far does an HD accelerator pump shoot: • 06 Accelerator Pu... Other tools I use: www.amazon.com/shop/shaneconl... Thank you for watching. Please subscribe and share my work! Join this channel to get access to perks: / @how2wrench Below are some links that help support me and my work. Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist
I love watching people show a set up the way a manufacturer wants something set up. Trying to learn carbs. I went backward and started more on efi. Everything past the intake boot works the same, but trying to learn how to make a carb do what I want is a process.
We love sharing comments like this with Shane. Use his 1:1 if you want to speed up the learning curve! Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Excellent video - I'm waiting for delivery of an HSR 42 for a Triumph Spitfire engine in a 1976 MG and thought I'd check out some videos while I wait. Glad I found your channel.
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 800 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Awesome! No one has a good video on these carbs .. you gotta do a tuning video for it ...I've always used s&s but I finally got sick of that exceliration and got the 42 and Its so much better I'm still a bit rich ..I'm not used to having all these adjustments and being able to tweak it just so. A video about tuning it would be super helpful ..all of your videos are super helpful thanks for everything you do.
Thanks for commenting and adding value to our community! Your request has been added to the list. Support our work by sharing or a donation to help us keep going, friend. BTW. We have many other videos in the fuel systems playlist: ruclips.net/video/3FmfO-mWv3Q/видео.html Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
I did an HSR 42 on my 99 evo night train. It was a little rich so I followed it up with I higher flow K&N air cleaner instead of a higher flow OE style air cleaner with a modified air box. I then pulled my baffles and ordered 4 inch instead of 10inch baffles. Then installed an ultima single fire ignition system. Finally I put and Ev27 cam with S&S adjustable push tubes and breather gear. Every part I added woke the bike up a bit more and complimented the HSR 42 carb but I'm still a tiny bit rich. I followed all the steps in the guid before I installed it. Reset it with every component and it runs great. I'm sure that tiny bit rich isn't killing anything but I am a 29 year mechanic and in my mind I can see carbon building in the combustion chamber and its driving me nuts. I agree you guys should make and on bike tuning video. I don't care if its on an 883 1200 80" or 88" most 96" and better were fuel injected. Just stay harley as that's who's buying 90% of the hsr42s
Shane you are priceless. I am a 48 years experience at age 64 machinist and mechanic. Like previous videos I watched of your putting together a twin cam counter balancer engine which helped me to learn how the missing teeth on one flywheel is how my crank position sensor worked. Now tonight with this carburetor video I found an answer to something I was unsure about, as for the small brass tibe in my throttle in where it wiggled a little bit and how I had to turn it to get my fuel to spray into the inside area. Its the brass nozzle that sticks up just before your throttle plates and sprays the fuel. Now I know I have it right on this evo 97 fatboy . It doesnt ove in where its metal to metal but in the exact way it would be with a o ring holding it in .
Love hearing from folks that have benifited from multiple videos! If you didn't know we have "says thanks" link below! We appreciate you. 👍 Thank you for taking the time to comment! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
Great to hear. Want to give us a “high five”? Click here www.paypal.me/how2wrench Need more personalized help? Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
I have a 2010 FXDWG. I removed all the EFI components and added this carb and I have to say - it made a HUGE difference in the way the bike runs. Along with the V&H exhaust and JET air cleaner and intake, it's 25% more of everything. I just sent my heads up to Hammer Performance in Idaho for a CNC porting and valve job. Along with an Andrews 57H cam set, the bike will be just where I want it. . . . . for now!
Sounds like a badass set-up Dave! Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Love you handle name...Knowledge is power! We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 800 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thanks for commenting and adding value to our community! Smart guy.....Yes as with many of my videos, they translate. Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
i put a TM42 on xr650r and BRAP....gota have the small #30 accel/pump jet and melt the tank so it fits....or annoy MikuniOz so they make the 42 with a LHS cam/cable pull
Been running a HSR45 on my modified TC since 2006. I haven't had to touch anything. If I ever need to. This video will be golden. But, now that you dumped all that info into my head. I want to chase through that fuel mixer on my machine. Shane you Rock brother. Now go get some sleep.
Thanks for commenting and adding value to our community! Cool man. Thanks for tuning in! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Thanks for posting this video. Just in the process of fitting a HSR42 to replace the EFI on a 1996 Road King - so will be following all of these steps.
Glad it helped. You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
Right on! Very well produced! I have a 48mm on a 125ci Patrick and it's a ground pounder. Very crisp throttle response and the Patrick provides the power. Suck bang and blow!!!!
Shane, new subscriber here. Thanks for sharing your knowledge and expertise 👍 Currently have a HSR42 and have found the following recommendations to be spot on for it. 165 Main, 17.5 Pilot, -98 needle on the #4 clip slot (one below the middle), 50 pump nozzle on my bone stock Evo with stock mufflers. It has never ran better even when it was fuel infected. Average MPG is 38 and have seen 45.
Welcome aboard! We sure love hearing you subbed! Over 700 videos on here. We even made a quick video of how to best search the channel for you. Here are two links to best serve you on our channel: Channel Search: ruclips.net/video/oAeXz1nd-eQ/видео.html All Playlists: ruclips.net/user/conleybuiltplaylists Please say thanks and “high five us here: www.paypal.me/how2wrench
Thanks for commenting and adding value to our community Mark! Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page! We have a LIVE Q&A starting soon and will use comments from videos to try and answer too. Got a question you need answered sooner than our LIVE Q&A Shows are on? Here’s how to get your answer for free! ruclips.net/video/oAeXz1nd-eQ/видео.html (and other free tools and products!) Get my cell number here: how2wrench.com/product/personal-tech-training-phone-facetime/ Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!
Thank you. We updated the link: amzn.to/3YnxZpm We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Jenny Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Sir thanks for the updated link, I looked at it and have question, which Mikuni 42mm Carb would you recommend from link for both my 1996, 1999 Dyna FXDL stock with short shoots Knock off exhaust, thks again.
Hi Shane great videos I have a problem finding the right measurement for my Yamaha Dragster 1100cc2001 measure like your video shows from the base of the carburettor to the top of the float the manual shows the tube method saying 5mm below datum mark which is the float bowl joint Yamaha says 5mm above IAM confused please can you help
Glad it helped. We will let Shane know! You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Hola amigo Shane. thank you for the video. Shane to lubricate plastics and rubbers, dont use WD40 or any other lubricants with petroleum components. The only lubricant that is plastic and rubbers safe is silicone oil. Keep that in mind. WD40 cracks plastics and rubbers after 1 year of use.
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
Thanks for commenting and adding value to our community! Nice Benjamin! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
Nice you noticed. Well that's because How 2 Wrench is a school. Shane taught a motorcycle tech program for 13 years and did a start up school as well. Then moved on to Suzuki USA and now runs the Global Technician Training program for Zipline Logistics Drone Delivery. He is in Japan as we speak teaching a group of techs. He will be back in the US this week for a collaboration meeting to build an online school with in-person opportunities too! Sub and stay tuned for more. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Jenny Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
So if the float is extended all the way out, what should measurement be there? I need to know how far from the bottom of the bowl the float needs to be
You are very welcome. We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
by the way, im doing a mild to warm street build with a .030 over EVO with 9.5 compression and an Edwards EV59, some portwork and dual supertrapp exhaust. would you recommend one of these over a Super E with powerjet mod for best hot street use and rideability?
You bet Eric....Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Glad you enjoyed it! Thank you for commenting. Could you spare $2 and support us with even more benefits? Smash the subscribe button and bell! Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
Glad it was helpful! 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
You have to pull pretty much everything apart and check it for swarf and maybe file imperfections away these days sorry to say. Chinese stuff mainly, but I've even had USA and European made parts with swarf left inside. It's good engine building practice to check all parts before final assembly anyway
Glad it helped. We will let Shane know! You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
I'm having an issue with my TM 42, when I pull the choke it doesn't work, I basically have to start it and give it gas right away and choke it manually with the throttle.
That's a good question for Shane directly. Have you considered joining the channel to get him daily as a member benefit? You reached the social media team here. We get 300-400 requests a week, so it’s a bit time challenging as you can imagine. Shane does try to answer some non-members' questions when he gets some time so hang tight if you’re not in a hurry. Did you know one of the member benefits is to ask for which videos would work for your needs and get daily "quicks answers" to questions directly from Shane?. Best $1.99 a month you'd spend...of course enjoy the over 700 free videos and access the member only vids with all the other benefits listed below. There are two immediate options that can get you a solution within 24 hours and quite often within the day. Option 1: Consider joining...best $1.99 you'll spend this month 😁 This is great for quick answers. He literally logs in and answers member questions daily! He does an AM and PM check-in to answer all member questions. Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thanks for commenting and stopping by our community! I would bet MANY of the folks in here know the MASTER SCANNER DANNER. Love your work and lets team up on something! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Great content Shane! I have a question about my accelerator pump adjuster #1 was turned by someone who thought they were adjusting the idle. Can you help me get dialed back in as to where #1 pump adjuster should be set?
Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
That's a good question for Shane directly. Have you considered joining the channel to get him daily as a member benefit? You reached the social media team here. We get 300-400 requests a week, so it’s a bit time challenging as you can imagine. Shane does try to answer some non-members' questions when he gets some time so hang tight if you’re not in a hurry. Did you know one of the member benefits is to ask for which videos would work for your needs and get daily "quicks answers" to questions directly from Shane?. Best $1.99 a month you'd spend...of course enjoy the over 700 free videos and access the member only vids with all the other benefits listed below. There are two immediate options that can get you a solution within 24 hours and quite often within the day. Option 1: Consider joining...best $1.99 you'll spend this month 😁 This is great for quick answers. He literally logs in and answers member questions daily! He does an AM and PM check-in to answer all member questions. Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page! We have a LIVE Q&A starting soon and will use comments from videos to try and answer too. Got a question you need answered sooner than our LIVE Q&A Shows are on? Here’s how to get your answer for free! ruclips.net/video/oAeXz1nd-eQ/видео.html (and other free tools and products!) Get my cell number here: how2wrench.com/product/personal-tech-training-phone-facetime/ Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!
Glad it was helpful! Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
My RS-36 has a slight drip in the over flow lines after I use the bike. Need to bend the tab up to lower float or down to lower float? I did verify it's 17mm - - maybe I need to go 16mm?
Yo! We just run the social media.....Want him to drop his wrenches and help you? He loves helping subscribers… Help us grow friend! Here’s how: 1. Subscribe and let us know with a response. We will circle back when we can, it depends on member/customer demands and needs 2. We answer your questions EVERYDAY for channel members Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin 3. Give us a high 5 here: www.paypal.me/how2wrench and I run back to the computer! 4. Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Hey Shane nmbr just did hsr42 rebuild for my revtec 100. Does the pilot jet go all the way thru also I have 1 left over stamped Y6 one pic I didn't take , on disassembly where does it go
We are just the social media team. You can catch Shane daily as a channel member or supporter. He is the only person in the shop and training center so you can imagine how busy it is. Note to other community subs, can anyone please help XXXXXX? FYI...he does drop his tools and try to answer comments for non members at times when he is online but is pretty swamped. If your not in a hurry, he will get back to this in time. If you want him ASAP here are the links: (P.S. thanks in advance for being a solid human being and understanding we have to pay the bills too...😏) Option 1: Consider joining...best $1.99 you'll spend this month 😁 This is great for quick answers. He literally logs in and answers member questions daily! He does an AM and PM check-in to answer all member questions. Join this channel to get access to the perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Option 2: If you need help sooner choose his 1:1 option! What you get is a deep dive one-on-one with him. Use video, email, and phone support. He will drop his tools and work with you directly! Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Is there ANYWAY to modify the MIKUNI HSR 42 so that will quieten down that LOUD CLATTERING NOISE coming from this carburetor ? Its so loud I can hear it over my straight open drag pipes ! Very annoying !!
I'm the intern studying under Shane. I grabbed Shane quick and he said he he wonder's if you have genuine Mikuni or got a fake copy. There are dealers and places like Amazon selling fakes...even the box looks legit. Mikuni has info on their website....please consider joining our channel for more support like this...best $1.99 you'll spend 🙌 One of these days I hope to move from the office to the shop! He has a few other tricks up his sleeve he plans on making videos on. If you need help sooner choose and option below! That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily! He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones. There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it! Make it a great day! The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt High fives help too! Give him one here: www.paypal.me/how2wrench
I installed a new hsr42 on my evo and it pours gas out of the drainage line and also thru the open downward brass tube on the side of the carb. Today I pulled the carb and going to check everything. Any advice would be appreciated.
Your in luck. We have many fuel system videos in our playlist or if you want one on one help reach out to me. I'll put some links here: Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page! We have a LIVE Q&A starting soon and will use comments from videos to try and answer too. Got a question you need answered sooner than our LIVE Q&A Shows are on? Here’s how to get your answer for free! ruclips.net/video/oAeXz1nd-eQ/видео.html (and other free tools and products!) Get my cell number here: how2wrench.com/product/personal-tech-training-phone-facetime/ Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!
Idle speed adjustment. 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
I need help on a HSR42 carb. I followed this video, and the manual and adjusted the float bowl. Still got overflow. Then I replaced the valve and seat, and checked the float adjustment again. This time I went closer to 20mm....still have overflow. I have tried everything. Complete rebuild kit, all gasket, jets, etc. The only thing I havent replace is the float itself. Why do I still have overflow? By this, I mean when I turn on fuel, the carb bowl fills up, and then starts to drip out of the overflow tube. There is nothing else to replace but the carb itself. How do I fix this?
I'm the just the intern studying under Shane. One of these days I hope to move from the office to the shop! Wish I knew the answer but don't want to bs you. He couldn't screen these requests fast enough... He has a few other tricks up his sleeve he plans on making videos on. If you need help sooner choose and option below! That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily! He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones. There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it! Make it a great day! The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt High fives help too! Give him one here: www.paypal.me/how2wrench
@@How2Wrench Thank you for the reply. My problem was not a normal one. I had replaced the needle and seat with new parts from Drag Specialties, and still had overflow. Upon very careful inspection, I found that the needle would bind if it was in the right position. Because at the bottom of the seat there are four perpendicular holes. There was a tiny ridge on the circumference of the holes that the splines of the needle would catch on. This would cause overflow. I replaced those parts with Genuine Mikuni seat and needle and the problem was solved. Tricky problem, but it is solved, thank you.
Loved this video! I put. Mikuni HSR 42 on my ‘05 Sportster 1200C & I feel like I’m running rich. I can’t detect any air leaks on my intake & when I adjust my air/fuel mixture (brass) screw my idle changes at about 2-1/2 turns out but if I keep backing it out I swear the idle never changes again for me to set it at the halfway between point! Do I need to swap my jet(s)? I appreciate any help anyone can give me on this
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community! We offer tuning help! Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Steven it should of come with 2 main and 2 excelerator jets 92, 94 main and 104 102 excelrater jet you need to try the smaller jets, if your plug is black , if its grey its lean . white is lean . Tan is best . the needle jet is under the 3 screws on top Up is lean down is rich , but it has other moving parts under the cap . Minkui has a manual google it . hope that helps
hi do you know how many turns you should give to the fuel screw? i just bought a set of mikuni rs 36 for my bike and mikuni instruction says that the adjustment should be from 1/8 and 1/2 turn out max, but sound very strange to me and the bike runs very lean at 1/2 turn out, can i go further to 1 1/2 turn out? tks
That's a good question for Shane directly. Have you considered joining the channel to get him daily as a member benefit? You reached the social media team here. We get 300-400 requests a week, so it’s a bit time challenging as you can imagine. Shane does try to answer some non-members' questions when he gets some time so hang tight if you’re not in a hurry. Did you know one of the member benefits is to ask for which videos would work for your needs and get daily "quicks answers" to questions directly from Shane?. Best $1.99 a month you'd spend...of course enjoy the over 700 free videos and access the member only vids with all the other benefits listed below. There are two immediate options that can get you a solution within 24 hours and quite often within the day. Option 1: Consider joining...best $1.99 you'll spend this month 😁 This is great for quick answers. He literally logs in and answers member questions daily! He does an AM and PM check-in to answer all member questions. Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Hi, wondering if you would comment. My HSR42 is on an Austin Mini 1275. Low end is great, main jet performance great. Mid range flat spot, and back firing out the exhaust. Get past that, great. It acts lean and according to my o2 sensored gauge it says that also. Messed with A/P, no change, have the richest needle on the richest position with two washers under the needle and better but not great. Still almost goes away with pulling enrichener out. This should not be this hard. I'm wondering how sensitive the float adjustment is and given the amount the carb is tipped on the car. Thoughts please?
Glad I could help! 👍 Thank you for taking the time to comment! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Subscribe and Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
Sounds like you have decided.... 😎👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
Shane, I bought a Zongshen 190cc engine. I want to shim the gearbox but don’t know what I’m doing. If you could do a tutorial on how to shim a 190 gearbox that would be the best thing ever. I’m mechanically inclined as I fix cars. I’m just new to motorcycle pit bike engines. Even if you could get me a manual on the 190 maybe that would help me out.
I installed an HSR42 on my 1200 sporty and i LOVE it, but the dang thing is pissing fuel. When I get back from a ride, I shutoff the bike and shutoff my Pingle petcock and fuel sprays out of the carb, soaking the exhaust and side of engine. It seems to be spraying out of the fuel inlet fitting, like it's built up pressure or something. Bike runs great and I love this carb, but I'm scratching my head on this one.
Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists! Even more training and deep dives if ever needed… Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
I have a mikuni carb on my 98 road glide with a thunder header exhaust. Just replaced exhaust gaskets and head gaskets. Oil change and new plugs and wires. I still am getting a lot of sputtering and starting issues idle is either too high or low and bike dies or runs too rich. Any help?
thx for the helpful video. So if I want to set the float height on one of those slanted Mikuni carbs on an atv with no service manual or those measuring tools, would my best bet be to set the float tab 90 degrees to the float arms as you mentioned in the video or to adjust it as best as I can so the tab is parallel with the slant of the carb body? Thx!
I posted the manual link in the video description. The manual is for the carb and I would follow it. Your ATV intake angle is not in some severve angle so I would say "most likely". 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
Glad it helped! You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend... Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thats really a base by base situation. I would simple start with evaluation of the threads asking yourself does the screw thread in and out smooth. Really a much deeper conversation. Feel free to reach out if really needed. Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page! We have a LIVE Q&A starting soon and will use comments from videos to try and answer too. Got a question you need answered sooner than our LIVE Q&A Shows are on? Here’s how to get your answer for free! ruclips.net/video/oAeXz1nd-eQ/видео.html (and other free tools and products!) Get my cell number here: how2wrench.com/product/personal-tech-training-phone-facetime/ Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!
Is there a shorter choke cable available that would allow you to simply flip it and run it out on the filter side? The cable wouldn't be in any kind of bend or kinked. I'm going to check mine to see if the cable connections might interfere. I have a straight pull without the cable but it won't work on my Sportster. You even had it in the position I'm speaking about at one time.
That’s a great question for Shane directly! We are just the social media team. Shane has a solution for you. As far as the question, Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily! He is just returning from an extended stay in Japan training students this winter. You can imagine how full his inbox is. We put orders are to the front of the line. The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
@@How2Wrench thank you very much for the reply. I wasn't aware that there was something I may need to join. I enjoyed the video very much however I'm just an ordinary ol'man with a sportster that does my own work for my own bike. I don't run a shop and I'm not officially a mechanic. I find Shane's videos interesting but I don't really need to know how to do much of what he covers in his videos. Not saying joining isn't worth it but just not seeing me needing to know much of what he covers in his video. I just found the video to be interesting and had that one question about the choke. I will find out the answer to my question over the next few months anyway when I rebuild my engine and install a new her carb that I've modified to run I my bike with a blow through turbo set up. I'm kind of curious if he knows the modifications needed to make the hsr work with a blow through turbo not that I need to know because I've did mine already. Thank you
@@LH-kz2nf No worries. Absolutely no need to join to watch the free video, it's just for those wanting him to stop working in the shop or teaching and look up part numbers, research, talk to him to diagnose a problem over video chat and as a way to say thanks...
Hope this message makes sense to you as a decent human being that also works for a living and gets it. I’m the intern studying under Shane and on the social media team.. He's in the shop working or training a class. I fInally made it to your comment going down the list...just an FYI...he literally logs in and answers member questions daily! He does an AM and PM check in to answer all member questions. Consider joining...best $1.99 you'll spend this month 😁 Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Shane does try answer some non members questions when he get's some time so hang tight if joining is not an option for you. One of these days I hope to move from the office to the shop! Wish I knew the answer but don't want to bs you. He couldn't screen these requests fast enough... If you need help sooner choose or more personal his 1:1 option is below! He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide email replies as his schedule is full with shop customers, training schedules, and one on ones. There's good news though! A deep dive one-on-one with him is an option. Use video, email and phone support. Through the one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt High fives help too! Give him one here: www.paypal.me/how2wrench
Glad it was helpful! Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
Anyone know where I can get a carb rebuild kit or individual jets for a Mikuni carburetor like this? I have a 1987 DR200 that has a 42A21 carb.....definitely need a kit or at least pilot jet. Thanks
I can locate them. Join the channel or donate and I'll take the time to look up part numbers. Thank you for commenting. Want more? Smash the sub button! Here are the links to support us for this information and our work saving you money. Join this channel to get access to perks: (Free tool giveaways and member-only videos) ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin Give us a high 5 here: www.paypal.me/how2wrench
NOTE: Just in case someone is reading this, Brent did not order parts or get this lack of customer service from How2Wrench. Brent, Shane's on the road training techs in northern cali this week and not here to ask, but I think he linked a copy of the manual in the video description. I just pinned it in the top comment for you too. Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@@How2Wrench took 42 apart and took it down so I could put it in a sonic cleaner was that bad.worked good the pilot jet doesn't go all the way thru is it supposed to? Also I'll came up with one brass tube an inch long 3/16th in dia have no idea one pic I didn't take. Hopefully in the parts diagram. Cleaned up good . Thx an I apologize the left over jet has Y6on it. Hope Shane can help
@@brentrlarson4153 If you don't figure it out that's a good question for Shane. We get's 300-400 requests a week and could never get anything done trying to answer of them. So members first and the rest when he has downtime in airports usually. We are just the office staff. He answers members' or those who donate for support questions daily...links in our previous comment and best of success.
Shoot Cody...that's one for Shane...he is in Africa training students this summer. We are just the social media team. He plans on answering channel MEMBER questions each Sunday! Not a member yet? Here are the details! Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/ Note: If you are a new channel member please reply back and we will see your RUclips Member handle in your name. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
Yo! We just run the social media.....Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/ Note: If you are a channel member please reply back with your RUclips handle. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
Thank you 👍👍 Thank you for taking the time to comment! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
I say it will shoot gas 2 foot out of the carb , but I own a 42mm HSR, im running a tad on the lean side , it was on the dino with my SE heads , Im back to stock , with bigger pistons 10 over . Think its on the Needle setting , not my jets . The 42 is not the same as a S&S lot more to the 42 . I have my book , I rather see it apart .
Glad you think so! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
To try and answer this would be a ton of back and forth conversation as there are many variables...Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/
I absolutely h8t3 my 85 Honda Rebel Mikuni carb. It's given me nothing but h377 forever. I even went blind for 5 years from getting carb spray in my eyes, from fooling with this Mikuni POS. I've taken it out, rebuilt it, put it back in so many time it's not even funny anymore.
Hello Shane. My 94 fatboy, hrs 42 started to backfire out the carb (very bad) at around 1600 rpm &wont rev past 2000 rpm(severe backfiring) I've taken the carb apart a few times, all passages are clean (went back together with carb kit)adjusted everything as your EXELENT vidio instructed. Still same problem. Idles fantastic. Do You have any ideas what else it could be?
Hi Kim...many varibles...compression, leakdown it where I ALWAYS start before touching a carb and to baseline over time. HD's are know for intake leaks too. I have videos on all this here Compression: ruclips.net/user/conleybuiltsearch?query=compression Leakdown: ruclips.net/user/conleybuiltsearch?query=leakdown HD intake: ruclips.net/user/conleybuiltsearch?query=harley+intake 👍 Thank you for taking the time to comment! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Subscribe and Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
Hello I'm sorry I didn't realize I was on my wife's RUclips. I'm Gordon. I figured it out, 2 problems, the carb was dirty inside I fixed that. The other problem was I didn't tighten the 2 nuts on the coil. Cant believe I didn't see that before. Thank You for all the tips. Your vidio is cool, Thank You again
Thank you. We updated it. You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Hi Kenny. This is a genuine Mikuni (non-polished part number) I've never used the "knock-off" myself as I think the Mikuni is a great price from a fantastic quality company that did all the R&D. I would throw the other one away before putting part in in and grab an original. Have you seen how good a deal this is on Amazon? amzn.to/3dna1S9 This was only $12 more than the knock off! 🙌 🏁 Noticed your a subscriber, thank you for SUBSCRIBING! Love seeing our subscribers comment on how the video helped! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
Glad it helped! You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thanks for letting us know the link was bad. We got it fixed. 29 years at it and going strong! how2wrench.com/merch-%2F-gear Thanks! Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Hi Michael. Wierd your not seeing it. Would be best to watch the entire video. Not only do we should how to set it, we cover how to test it. Strange you missed it. Want even more? Best $2 you'll ever spend... Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@@michaelwheatley1813 Shane has many other free videos in the Fuel System playlist or he offers 1:1 techline video chat if you can't figure it out. He's in the shop working as we write this. He is traveling teaching techs quite often but here in town for at least a few weeks. 02.04.2023 Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
$400 carburetor out of the box on my 95 heritage- RUNS LIKE SHIT, WONT IDLE. And if it does, it dies shortly after. I’m extremely disappointed and am putting a cv back on what’s SUPPOSED to be on there.
We asked Shane about this and he said to google "counterfit HRS" or mikuni and make sure you don't have the counterfeit copies running around. Even dealers are getting burned reselling them thinking they are making more money but get ripped off with the counterfeits. Mikuni put our a notice somewhere.
You must have skipped ahead in the video? He literally shows it both in the manual and in the video? @5:05 And the starting points are the base jet that comes in the carb. I'm mentoring under him but if you want him directly join the channel for daily access. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
You keep calling them vernier calipers they are not vernier calipers. You have only used dial calipers and digital calipers. Vernier calipers are the ones with all of the little lines on them where you have to match the lines up. There is no dial or digital readout on vernier calipers.
Hello, With over 400 requests a week I'd be typing all day my friend. So many possibilities without more details. It sounds like you’re ready for some Techline help. Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Links mentioned in video:
Fuel Systems Playlist:
Carb Service tools I use: www.amazon.com/ideas/amzn1.ac...
HSR Carbs/Cables/Air Cleaner adaptor: amzn.to/2VZXrjP
Mikuni HSR Owner’s Manual: how2wrench.com/free-resources...
How to replace HD Intake Seals:
• How to install a ...
How to tape throttle position:
• EM Series: How to...
AUX Fuel Tank: amzn.to/2sylEQE
Contest-How far does an HD accelerator pump shoot:
• 06 Accelerator Pu...
Other tools I use:
www.amazon.com/shop/shaneconl...
Thank you for watching. Please subscribe and share my work!
Join this channel to get access to perks:
/ @how2wrench
Below are some links that help support me and my work.
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
I love watching people show a set up the way a manufacturer wants something set up. Trying to learn carbs. I went backward and started more on efi. Everything past the intake boot works the same, but trying to learn how to make a carb do what I want is a process.
We love sharing comments like this with Shane. Use his 1:1 if you want to speed up the learning curve!
Thanks for sharing and the added value to our wrenching community. Keep them coming.
You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Excellent video - I'm waiting for delivery of an HSR 42 for a Triumph Spitfire engine in a 1976 MG and thought I'd check out some videos while I wait. Glad I found your channel.
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 800 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance.
YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Awesome! No one has a good video on these carbs .. you gotta do a tuning video for it ...I've always used s&s but I finally got sick of that exceliration and got the 42 and Its so much better I'm still a bit rich ..I'm not used to having all these adjustments and being able to tweak it just so. A video about tuning it would be super helpful ..all of your videos are super helpful thanks for everything you do.
Thanks for commenting and adding value to our community! Your request has been added to the list. Support our work by sharing or a donation to help us keep going, friend. BTW. We have many other videos in the fuel systems playlist: ruclips.net/video/3FmfO-mWv3Q/видео.html
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
I did an HSR 42 on my 99 evo night train. It was a little rich so I followed it up with I higher flow K&N air cleaner instead of a higher flow OE style air cleaner with a modified air box. I then pulled my baffles and ordered 4 inch instead of 10inch baffles. Then installed an ultima single fire ignition system. Finally I put and Ev27 cam with S&S adjustable push tubes and breather gear. Every part I added woke the bike up a bit more and complimented the HSR 42 carb but I'm still a tiny bit rich. I followed all the steps in the guid before I installed it. Reset it with every component and it runs great. I'm sure that tiny bit rich isn't killing anything but I am a 29 year mechanic and in my mind I can see carbon building in the combustion chamber and its driving me nuts. I agree you guys should make and on bike tuning video. I don't care if its on an 883 1200 80" or 88" most 96" and better were fuel injected. Just stay harley as that's who's buying 90% of the hsr42s
Shane you are priceless. I am a 48 years experience at age 64 machinist and mechanic. Like previous videos I watched of your putting together a twin cam counter balancer engine which helped me to learn how the missing teeth on one flywheel is how my crank position sensor worked. Now tonight with this carburetor video I found an answer to something I was unsure about, as for the small brass tibe in my throttle in where it wiggled a little bit and how I had to turn it to get my fuel to spray into the inside area. Its the brass nozzle that sticks up just before your throttle plates and sprays the fuel. Now I know I have it right on this evo 97 fatboy . It doesnt ove in where its metal to metal but in the exact way it would be with a o ring holding it in .
Love hearing from folks that have benifited from multiple videos! If you didn't know we have "says thanks" link below! We appreciate you.
👍 Thank you for taking the time to comment!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Great video! After watching your video I bought a Mikuni HSR 42 for my Springer.
Great to hear. Want to give us a “high five”? Click here www.paypal.me/how2wrench
Need more personalized help? Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
I have a 2010 FXDWG. I removed all the EFI components and added this carb and I have to say - it made a HUGE difference in the way the bike runs. Along with the V&H exhaust and JET air cleaner and intake, it's 25% more of everything. I just sent my heads up to Hammer Performance in Idaho for a CNC porting and valve job. Along with an Andrews 57H cam set, the bike will be just where I want it. . . . . for now!
Sounds like a badass set-up Dave! Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
I love how you end that "the bike will be just where I want it . ......for now". This was 3 yrs ago
Thank you for this video. I just bought a HD and it has this carb on it. I found your video and now I can adjust/ set up properly. Great video!!
Love you handle name...Knowledge is power! We love sharing comments like this with Shane.
Thanks for sharing and the added value to our wrenching community. Keep them coming.
You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Great demonstration fully understandable Illustrated and well Worth my time to watch very informational
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 800 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance.
YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thanks Shane. I just put a new Mikuni TM40 on my Honda XR650R and all your info directly translates! Brapp!!
Thanks for commenting and adding value to our community! Smart guy.....Yes as with many of my videos, they translate.
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
i put a TM42 on xr650r and BRAP....gota have the small #30 accel/pump jet and melt the tank so it fits....or annoy MikuniOz so they make the 42 with a LHS cam/cable pull
Been running a HSR45 on my modified TC since 2006. I haven't had to touch anything. If I ever need to. This video will be golden. But, now that you dumped all that info into my head. I want to chase through that fuel mixer on my machine.
Shane you Rock brother. Now go get some sleep.
Thanks for commenting and adding value to our community! Cool man. Thanks for tuning in!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Thanks for posting this video. Just in the process of fitting a HSR42 to replace the EFI on a 1996 Road King - so will be following all of these steps.
Glad it helped. You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench
Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Good video ! Clear images and great narration of what's going on.
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Right on! Very well produced! I have a 48mm on a 125ci Patrick and it's a ground pounder. Very crisp throttle response and the Patrick provides the power. Suck bang and blow!!!!
Shane, new subscriber here. Thanks for sharing your knowledge and expertise 👍
Currently have a HSR42 and have found the following recommendations to be spot on for it.
165 Main, 17.5 Pilot, -98 needle on the #4 clip slot (one below the middle), 50 pump nozzle on my bone stock Evo with stock mufflers. It has never ran better even when it was fuel infected. Average MPG is 38 and have seen 45.
Welcome aboard! We sure love hearing you subbed! Over 700 videos on here. We even made a quick video of how to best search the channel for you. Here are two links to best serve you on our channel:
Channel Search: ruclips.net/video/oAeXz1nd-eQ/видео.html
All Playlists: ruclips.net/user/conleybuiltplaylists
Please say thanks and “high five us here: www.paypal.me/how2wrench
@@How2Wrench I've watched many of your videos, you should consider opening up your own speed shop and take it to a whole new level!
Thanks for taking the time to make this video... Now I know.... thanks man...
Thanks for commenting and adding value to our community Mark!
Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page!
We have a LIVE Q&A starting soon and will use comments from videos to try and answer too. Got a question you need answered sooner than our LIVE Q&A Shows are on? Here’s how to get your answer for free! ruclips.net/video/oAeXz1nd-eQ/видео.html (and other free tools and products!)
Get my cell number here: how2wrench.com/product/personal-tech-training-phone-facetime/
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!
Sir Great video< Your Amazon link for choke cable does not work can you repost new choke cable with metal nut thks ,
Thank you. We updated the link: amzn.to/3YnxZpm
We love sharing comments like this with Shane.
Thanks for sharing and the added value to our wrenching community. Keep them coming.
You rock for commenting! We will let Shane know!
Jenny
Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Sir thanks for the updated link, I looked at it and have question, which Mikuni 42mm Carb would you recommend from link for both my 1996, 1999 Dyna FXDL stock with short shoots Knock off exhaust, thks again.
Hi Shane great videos I have a problem finding the right measurement for my Yamaha Dragster 1100cc2001 measure like your video shows from the base of the carburettor to the top of the float the manual shows the tube method saying 5mm below datum mark which is the float bowl joint Yamaha says 5mm above IAM confused please can you help
Best video on carb work! Thank you for sharing. Great tech. Thanks again👍👍
Glad it helped. We will let Shane know!
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Hola amigo Shane. thank you for the video. Shane to lubricate plastics and rubbers, dont use WD40 or any other lubricants with petroleum components. The only lubricant that is plastic and rubbers safe is silicone oil. Keep that in mind. WD40 cracks plastics and rubbers after 1 year of use.
Great video man. Keep up the good work. Thanks for sharing your knowledge.
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Good video, I put a mikuni 42 hsr on my sportster
Thanks for commenting and adding value to our community! Nice Benjamin!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Once again Shane is the man, thx terry
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Very good you did that like teacher at school love it
Nice you noticed. Well that's because How 2 Wrench is a school. Shane taught a motorcycle tech program for 13 years and did a start up school as well. Then moved on to Suzuki USA and now runs the Global Technician Training program for Zipline Logistics Drone Delivery. He is in Japan as we speak teaching a group of techs. He will be back in the US this week for a collaboration meeting to build an online school with in-person opportunities too! Sub and stay tuned for more.
Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Grat job strat information
We love sharing comments like this with Shane.
Thanks for sharing and the added value to our wrenching community. Keep them coming.
You rock for commenting! We will let Shane know!
Jenny
Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Do they make a bracket kit for the choke cable? To hold it secure when pulling on it...
So if the float is extended all the way out, what should measurement be there? I need to know how far from the bottom of the bowl the float needs to be
Thank you thank you thank you
You are very welcome. We love sharing comments like this with Shane.
Thanks for sharing and the added value to our wrenching community. Keep them coming.
You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
by the way, im doing a mild to warm street build with a .030 over EVO with 9.5 compression and an Edwards EV59, some portwork and dual supertrapp exhaust. would you recommend one of these over a Super E with powerjet mod for best hot street use and rideability?
Thank u ... u saved me a ton of work
You bet Eric....Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Shane, you are a Maistro. Once again, a great video!!
Glad you enjoyed it! Thank you for commenting. Could you spare $2 and support us with even more benefits? Smash the subscribe button and bell! Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Great teacher
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Really helpful video. Thanks for the attention to detail!
Glad it was helpful! 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
You have to pull pretty much everything apart and check it for swarf and maybe file imperfections away these days sorry to say. Chinese stuff mainly, but I've even had USA and European made parts with swarf left inside. It's good engine building practice to check all parts before final assembly anyway
Сразу видно, Специалист !!!🔥
Glad it helped. We will let Shane know!
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
I'm having an issue with my TM 42, when I pull the choke it doesn't work, I basically have to start it and give it gas right away and choke it manually with the throttle.
Heyo. Do you have a video talking about the idle circuit. I know the idle screw starts at 2 turns out but what about the long idle screw?
That's a good question for Shane directly. Have you considered joining the channel to get him daily as a member benefit?
You reached the social media team here. We get 300-400 requests a week, so it’s a bit time challenging as you can imagine.
Shane does try to answer some non-members' questions when he gets some time so hang tight if you’re not in a hurry.
Did you know one of the member benefits is to ask for which videos would work for your needs and get daily "quicks answers" to questions directly from Shane?. Best $1.99 a month you'd spend...of course enjoy the over 700 free videos and access the member only vids with all the other benefits listed below.
There are two immediate options that can get you a solution within 24 hours and quite often within the day.
Option 1:
Consider joining...best $1.99 you'll spend this month 😁 This is great for quick answers.
He literally logs in and answers member questions daily! He does an AM and PM check-in to answer all member questions. Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Hey man, just dropping in to say hello
Thanks for commenting and stopping by our community! I would bet MANY of the folks in here know the MASTER SCANNER DANNER. Love your work and lets team up on something!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
What size is the main jet.. in 80 inch Evo
Thank you, sir.
Great content Shane! I have a question about my accelerator pump adjuster #1 was turned by someone who thought they were adjusting the idle. Can you help me get dialed back in as to where #1 pump adjuster should be set?
hats off to u. tks.
Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Great now how do I tune it once it's on the bike? I can't find a good, comprehensive video.
That's a good question for Shane directly. Have you considered joining the channel to get him daily as a member benefit?
You reached the social media team here. We get 300-400 requests a week, so it’s a bit time challenging as you can imagine.
Shane does try to answer some non-members' questions when he gets some time so hang tight if you’re not in a hurry.
Did you know one of the member benefits is to ask for which videos would work for your needs and get daily "quicks answers" to questions directly from Shane?. Best $1.99 a month you'd spend...of course enjoy the over 700 free videos and access the member only vids with all the other benefits listed below.
There are two immediate options that can get you a solution within 24 hours and quite often within the day.
Option 1:
Consider joining...best $1.99 you'll spend this month 😁 This is great for quick answers.
He literally logs in and answers member questions daily! He does an AM and PM check-in to answer all member questions. Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Very helpful Thank you. Will subscribe!
Thanks for commenting and adding value to our community!
Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page!
We have a LIVE Q&A starting soon and will use comments from videos to try and answer too. Got a question you need answered sooner than our LIVE Q&A Shows are on? Here’s how to get your answer for free! ruclips.net/video/oAeXz1nd-eQ/видео.html (and other free tools and products!)
Get my cell number here: how2wrench.com/product/personal-tech-training-phone-facetime/
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!
Awesome video, Very informative. Thanks for sharing!
Glad it was helpful! Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel:
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
My RS-36 has a slight drip in the over flow lines after I use the bike. Need to bend the tab up to lower float or down to lower float? I did verify it's 17mm - - maybe I need to go 16mm?
Yo! We just run the social media.....Want him to drop his wrenches and help you? He loves helping subscribers… Help us grow friend! Here’s how:
1. Subscribe and let us know with a response. We will circle back when we can, it depends on member/customer demands and needs
2. We answer your questions EVERYDAY for channel members Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
3. Give us a high 5 here: www.paypal.me/how2wrench and I run back to the computer!
4. Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/
fantastic video thank you.
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance.
YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Ever bulit any turbo motors with one of these?
Hey Shane nmbr just did hsr42 rebuild for my revtec 100. Does the pilot jet go all the way thru also I have 1 left over stamped Y6 one pic I didn't take , on disassembly where does it go
We are just the social media team. You can catch Shane daily as a channel member or supporter. He is the only person in the shop and training center so you can imagine how busy it is.
Note to other community subs, can anyone please help XXXXXX?
FYI...he does drop his tools and try to answer comments for non members at times when he is online but is pretty swamped. If your not in a hurry, he will get back to this in time. If you want him ASAP here are the links: (P.S. thanks in advance for being a solid human being and understanding we have to pay the bills too...😏)
Option 1:
Consider joining...best $1.99 you'll spend this month 😁 This is great for quick answers.
He literally logs in and answers member questions daily! He does an AM and PM check-in to answer all member questions. Join this channel to get access to the perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Option 2:
If you need help sooner choose his 1:1 option! What you get is a deep dive one-on-one with him. Use video, email, and phone support. He will drop his tools and work with you directly!
Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Is there ANYWAY to modify the MIKUNI HSR 42 so that will quieten down that LOUD CLATTERING NOISE coming from this carburetor ? Its so loud I can hear it over my straight open drag pipes ! Very annoying !!
I'm the intern studying under Shane. I grabbed Shane quick and he said he he wonder's if you have genuine Mikuni or got a fake copy. There are dealers and places like Amazon selling fakes...even the box looks legit. Mikuni has info on their website....please consider joining our channel for more support like this...best $1.99 you'll spend 🙌
One of these days I hope to move from the office to the shop!
He has a few other tricks up his sleeve he plans on making videos on. If you need help sooner choose and option below!
That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily!
He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones.
There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it!
Make it a great day!
The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Quick answers are answered daily as a channel member: Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
High fives help too! Give him one here: www.paypal.me/how2wrench
I installed a new hsr42 on my evo and it pours gas out of the drainage line and also thru the open downward brass tube on the side of the carb. Today I pulled the carb and going to check everything. Any advice would be appreciated.
Your in luck. We have many fuel system videos in our playlist or if you want one on one help reach out to me. I'll put some links here:
Thanks for commenting and adding value to our community!
Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page!
We have a LIVE Q&A starting soon and will use comments from videos to try and answer too. Got a question you need answered sooner than our LIVE Q&A Shows are on? Here’s how to get your answer for free! ruclips.net/video/oAeXz1nd-eQ/видео.html (and other free tools and products!)
Get my cell number here: how2wrench.com/product/personal-tech-training-phone-facetime/
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!
@@How2Wrench thanks Shane, I'll take a look. I know you great vids. I've been watching for awhile.
Sounds like a stuck or bad float
@@zachfox8018 yes it was stuck, all is good now, thanks
what is the big screw for ,,, pilot screw for idle?
Idle speed adjustment. 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Jedi level tutorial. 👏🙌🏾👍🏿
Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
I need help on a HSR42 carb. I followed this video, and the manual and adjusted the float bowl. Still got overflow. Then I replaced the valve and seat, and checked the float adjustment again. This time I went closer to 20mm....still have overflow.
I have tried everything. Complete rebuild kit, all gasket, jets, etc. The only thing I havent replace is the float itself.
Why do I still have overflow? By this, I mean when I turn on fuel, the carb bowl fills up, and then starts to drip out of the overflow tube.
There is nothing else to replace but the carb itself.
How do I fix this?
I'm the just the intern studying under Shane. One of these days I hope to move from the office to the shop! Wish I knew the answer but don't want to bs you. He couldn't screen these requests fast enough...
He has a few other tricks up his sleeve he plans on making videos on. If you need help sooner choose and option below!
That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily!
He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones.
There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it!
Make it a great day!
The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Quick answers are answered daily as a channel member: Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
High fives help too! Give him one here: www.paypal.me/how2wrench
@@How2Wrench Thank you for the reply. My problem was not a normal one. I had replaced the needle and seat with new parts from Drag Specialties, and still had overflow. Upon very careful inspection, I found that the needle would bind if it was in the right position. Because at the bottom of the seat there are four perpendicular holes. There was a tiny ridge on the circumference of the holes that the splines of the needle would catch on. This would cause overflow. I replaced those parts with Genuine Mikuni seat and needle and the problem was solved.
Tricky problem, but it is solved, thank you.
Loved this video! I put. Mikuni HSR 42 on my ‘05 Sportster 1200C & I feel like I’m running rich. I can’t detect any air leaks on my intake & when I adjust my air/fuel mixture (brass) screw my idle changes at about 2-1/2 turns out but if I keep backing it out I swear the idle never changes again for me to set it at the halfway between point! Do I need to swap my jet(s)? I appreciate any help anyone can give me on this
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community! We offer tuning help!
Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Steven it should of come with 2 main and 2 excelerator jets 92, 94 main and 104 102 excelrater jet you need to try the smaller jets, if your plug is black , if its grey its lean . white is lean . Tan is best . the needle jet is under the 3 screws on top Up is lean down is rich , but it has other moving parts under the cap . Minkui has a manual google it . hope that helps
hi do you know how many turns you should give to the fuel screw? i just bought a set of mikuni rs 36 for my bike and mikuni instruction says that the adjustment should be from 1/8 and 1/2 turn out max, but sound very strange to me and the bike runs very lean at 1/2 turn out, can i go further to 1 1/2 turn out? tks
That's a good question for Shane directly. Have you considered joining the channel to get him daily as a member benefit?
You reached the social media team here. We get 300-400 requests a week, so it’s a bit time challenging as you can imagine.
Shane does try to answer some non-members' questions when he gets some time so hang tight if you’re not in a hurry.
Did you know one of the member benefits is to ask for which videos would work for your needs and get daily "quicks answers" to questions directly from Shane?. Best $1.99 a month you'd spend...of course enjoy the over 700 free videos and access the member only vids with all the other benefits listed below.
There are two immediate options that can get you a solution within 24 hours and quite often within the day.
Option 1:
Consider joining...best $1.99 you'll spend this month 😁 This is great for quick answers.
He literally logs in and answers member questions daily! He does an AM and PM check-in to answer all member questions. Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Hi, wondering if you would comment. My HSR42 is on an Austin Mini 1275. Low end is great, main jet performance great. Mid range flat spot, and back firing out the exhaust. Get past that, great. It acts lean and according to my o2 sensored gauge it says that also. Messed with A/P, no change, have the richest needle on the richest position with two washers under the needle and better but not great. Still almost goes away with pulling enrichener out. This should not be this hard. I'm wondering how sensitive the float adjustment is and given the amount the carb is tipped on the car. Thoughts please?
Great! Just what I needed!
Glad I could help! 👍 Thank you for taking the time to comment! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Subscribe and Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Cant decide for a dr650. A tm40 or an hsr42. Everyone uses the 40 but doesnt the 42 have more adjustment especially for the decel pop of the 40.
Sounds like you have decided.... 😎👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Shane, I bought a Zongshen 190cc engine. I want to shim the gearbox but don’t know what I’m doing. If you could do a tutorial on how to shim a 190 gearbox that would be the best thing ever. I’m mechanically inclined as I fix cars. I’m just new to motorcycle pit bike engines. Even if you could get me a manual on the 190 maybe that would help me out.
👍
I installed an HSR42 on my 1200 sporty and i LOVE it, but the dang thing is pissing fuel. When I get back from a ride, I shutoff the bike and shutoff my Pingle petcock and fuel sprays out of the carb, soaking the exhaust and side of engine. It seems to be spraying out of the fuel inlet fitting, like it's built up pressure or something. Bike runs great and I love this carb, but I'm scratching my head on this one.
Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists!
Even more training and deep dives if ever needed…
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
I have a mikuni carb on my 98 road glide with a thunder header exhaust. Just replaced exhaust gaskets and head gaskets. Oil change and new plugs and wires. I still am getting a lot of sputtering and starting issues idle is either too high or low and bike dies or runs too rich. Any help?
Andrew Potts probably Intake leak
thx for the helpful video. So if I want to set the float height on one of those slanted Mikuni carbs on an atv with no service manual or those measuring tools, would my best bet be to set the float tab 90 degrees to the float arms as you mentioned in the video or to adjust it as best as I can so the tab is parallel with the slant of the carb body? Thx!
I posted the manual link in the video description. The manual is for the carb and I would follow it. Your ATV intake angle is not in some severve angle so I would say "most likely".
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Great info, I have two of the hsr42 on my harley ,
Glad it helped! You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
How do you know if the air pilot screw has been bottomed out and the carb is junk? Also is the carb repairable if this happens?
Thats really a base by base situation. I would simple start with evaluation of the threads asking yourself does the screw thread in and out smooth. Really a much deeper conversation. Feel free to reach out if really needed.
Thanks for commenting and adding value to our community!
Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page!
We have a LIVE Q&A starting soon and will use comments from videos to try and answer too. Got a question you need answered sooner than our LIVE Q&A Shows are on? Here’s how to get your answer for free! ruclips.net/video/oAeXz1nd-eQ/видео.html (and other free tools and products!)
Get my cell number here: how2wrench.com/product/personal-tech-training-phone-facetime/
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!
Is there a shorter choke cable available that would allow you to simply flip it and run it out on the filter side?
The cable wouldn't be in any kind of bend or kinked.
I'm going to check mine to see if the cable connections might interfere.
I have a straight pull without the cable but it won't work on my Sportster.
You even had it in the position I'm speaking about at one time.
That’s a great question for Shane directly! We are just the social media team. Shane has a solution for you. As far as the question, Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily!
He is just returning from an extended stay in Japan training students this winter. You can imagine how full his inbox is. We put orders are to the front of the line.
The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Quick answers are answered daily as a channel member: Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
@@How2Wrench thank you very much for the reply. I wasn't aware that there was something I may need to join.
I enjoyed the video very much however I'm just an ordinary ol'man with a sportster that does my own work for my own bike. I don't run a shop and I'm not officially a mechanic.
I find Shane's videos interesting but I don't really need to know how to do much of what he covers in his videos.
Not saying joining isn't worth it but just not seeing me needing to know much of what he covers in his video. I just found the video to be interesting and had that one question about the choke. I will find out the answer to my question over the next few months anyway when I rebuild my engine and install a new her carb that I've modified to run I my bike with a blow through turbo set up.
I'm kind of curious if he knows the modifications needed to make the hsr work with a blow through turbo not that I need to know because I've did mine already. Thank you
@@LH-kz2nf No worries. Absolutely no need to join to watch the free video, it's just for those wanting him to stop working in the shop or teaching and look up part numbers, research, talk to him to diagnose a problem over video chat and as a way to say thanks...
Also, thank you for the kind note about enjoying the videos. We share these with Shane every Friday!
What if i am not getting the float pop off when i dry test with the mighty vac?
Hope this message makes sense to you as a decent human being that also works for a living and gets it. I’m the intern studying under Shane and on the social media team.. He's in the shop working or training a class. I fInally made it to your comment going down the list...just an FYI...he literally logs in and answers member questions daily! He does an AM and PM check in to answer all member questions. Consider joining...best $1.99 you'll spend this month 😁
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Shane does try answer some non members questions when he get's some time so hang tight if joining is not an option for you.
One of these days I hope to move from the office to the shop! Wish I knew the answer but don't want to bs you. He couldn't screen these requests fast enough...
If you need help sooner choose or more personal his 1:1 option is below!
He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide email replies as his schedule is full with shop customers, training schedules, and one on ones.
There's good news though! A deep dive one-on-one with him is an option. Use video, email and phone support.
Through the one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
High fives help too! Give him one here: www.paypal.me/how2wrench
is the screw on the hose for idle adjustment or the brass screw?
you can download the Mikuni tuning manual from their site. it's all you need.
How can I tell what HSR model mikuni carb I have?
Should have a 42 or something stamped somewhere on it real small.
@@Ashroyer86 thank you!
Good information Thank you
Glad it was helpful! Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel:
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Anyone know where I can get a carb rebuild kit or individual jets for a Mikuni carburetor like this? I have a 1987 DR200 that has a 42A21 carb.....definitely need a kit or at least pilot jet. Thanks
I can locate them. Join the channel or donate and I'll take the time to look up part numbers. Thank you for commenting. Want more? Smash the sub button! Here are the links to support us for this information and our work saving you money.
Join this channel to get access to perks: (Free tool giveaways and member-only videos)
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
Give us a high 5 here: www.paypal.me/how2wrench
@@How2Wrench unsure if this matters and has definitely confused me....after cleaning it I found out its a 42A20. What exactly does the 20 mean?
Where can I order some parts?
Just got my 42 rebuild. No instructions just parts list where can I get.install / rebuild instructions. Thx Brent....didn't order from yall
NOTE: Just in case someone is reading this, Brent did not order parts or get this lack of customer service from How2Wrench.
Brent,
Shane's on the road training techs in northern cali this week and not here to ask, but I think he linked a copy of the manual in the video description. I just pinned it in the top comment for you too.
Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Oh no I'm sorry if there was an implications
Sorry how to wrench
@@brentrlarson4153 No worries on our end. Just wanted to make sure others didn't read into it wrong. We get a lot of these sent to us.
@@How2Wrench took 42 apart and took it down so I could put it in a sonic cleaner was that bad.worked good the pilot jet doesn't go all the way thru is it supposed to? Also I'll came up with one brass tube an inch long 3/16th in dia have no idea one pic I didn't take. Hopefully in the parts diagram. Cleaned up good . Thx an I apologize the left over jet has Y6on it. Hope Shane can help
@@brentrlarson4153 If you don't figure it out that's a good question for Shane. We get's 300-400 requests a week and could never get anything done trying to answer of them. So members first and the rest when he has downtime in airports usually. We are just the office staff. He answers members' or those who donate for support questions daily...links in our previous comment and best of success.
Fuel leaking out of my fuel overflow after a ride. Would this be a float height issue?
Shoot Cody...that's one for Shane...he is in Africa training students this summer. We are just the social media team. He plans on answering channel MEMBER questions each Sunday!
Not a member yet? Here are the details!
Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in!
* Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/
Note: If you are a new channel member please reply back and we will see your RUclips Member handle in your name. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
I've got a m42 runs great at full choke push choke in she coughs and spits what am I looking at
Yo! We just run the social media.....Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in!
* Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/
Note: If you are a channel member please reply back with your RUclips handle. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
Hi excellent well explained video 👍🏻👍🏻👍🏻
Thank you 👍👍 Thank you for taking the time to comment! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
I say it will shoot gas 2 foot out of the carb , but I own a 42mm HSR, im running a tad on the lean side , it was on the dino with my SE heads , Im back to stock , with bigger pistons 10 over . Think its on the Needle setting , not my jets . The 42 is not the same as a S&S lot more to the 42 . I have my book , I rather see it apart .
Very interesting.
Glad you think so! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
I've got a TM42 on my 2005 DR650, getting 110 miles out of a 5.3gal tank... any tips?
To try and answer this would be a ton of back and forth conversation as there are many variables...Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/
First time on Ur channel.Do U rebuild carbs I'm in Las Vegas.Thats sounds funny me asking that.Please send address for shipping.TKS
We sure do, give me a call so I can get you a quote. We are in Phoenix, AZ now. 602-345-0432
I absolutely h8t3 my 85 Honda Rebel Mikuni carb.
It's given me nothing but h377 forever.
I even went blind for 5 years from getting carb spray in my eyes, from fooling with this Mikuni POS. I've taken it out, rebuilt it, put it back in so many time it's not even funny anymore.
I got error messages on all three links... ???
Hello Shane. My 94 fatboy, hrs 42 started to backfire out the carb (very bad) at around 1600 rpm &wont rev past 2000 rpm(severe backfiring)
I've taken the carb apart a few times, all passages are clean (went back together with carb kit)adjusted everything as your EXELENT vidio instructed. Still same problem. Idles fantastic. Do You have any ideas what else it could be?
I should have mentioned I have very good fuel flow from gas tank, & new plugs
Hi Kim...many varibles...compression, leakdown it where I ALWAYS start before touching a carb and to baseline over time. HD's are know for intake leaks too. I have videos on all this here
Compression: ruclips.net/user/conleybuiltsearch?query=compression
Leakdown: ruclips.net/user/conleybuiltsearch?query=leakdown
HD intake: ruclips.net/user/conleybuiltsearch?query=harley+intake
👍 Thank you for taking the time to comment! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Subscribe and Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
👍
Hello I'm sorry I didn't realize I was on my wife's RUclips. I'm Gordon.
I figured it out, 2 problems, the carb was dirty inside I fixed that.
The other problem was I didn't tighten the 2 nuts on the coil.
Cant believe I didn't see that before.
Thank You for all the tips. Your vidio is cool, Thank You again
@@kimlake7285 Good find...enjoy the ride and please sub and tell others about us. H2W
File not found on the download.
Thank you. We updated it.
You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench
Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
How to fit a mikuni in a 88ci .without shaving the heads.
Hi Shane, is that a Chinese Knock-Off Mikuni? It seems a little greyish. Can I use Mikuni parts on them? (Knock offs)??
Hi Kenny. This is a genuine Mikuni (non-polished part number) I've never used the "knock-off" myself as I think the Mikuni is a great price from a fantastic quality company that did all the R&D. I would throw the other one away before putting part in in and grab an original. Have you seen how good a deal this is on Amazon? amzn.to/3dna1S9 This was only $12 more than the knock off!
🙌 🏁 Noticed your a subscriber, thank you for SUBSCRIBING! Love seeing our subscribers comment on how the video helped! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Nice
Glad it helped! You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench
Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Where’s the slide adjustment
what I need is "404 not found" you give up?
Thanks for letting us know the link was bad. We got it fixed. 29 years at it and going strong! how2wrench.com/merch-%2F-gear
Thanks! Smash the sub and like please. Glad it helped!
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
nothing about accelerator pump
Hi Michael. Wierd your not seeing it. Would be best to watch the entire video. Not only do we should how to set it, we cover how to test it. Strange you missed it.
Want even more? Best $2 you'll ever spend...
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@@How2Wrench not the shaft the actual plunger in bowl one I'm working in will only go in bowl even with bowl so gives it no squirting abulity
@@michaelwheatley1813 Shane has many other free videos in the Fuel System playlist or he offers 1:1 techline video chat if you can't figure it out. He's in the shop working as we write this. He is traveling teaching techs quite often but here in town for at least a few weeks. 02.04.2023 Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
$400 carburetor out of the box on my 95 heritage- RUNS LIKE SHIT, WONT IDLE. And if it does, it dies shortly after. I’m extremely disappointed and am putting a cv back on what’s SUPPOSED to be on there.
We asked Shane about this and he said to google "counterfit HRS" or mikuni and make sure you don't have the counterfeit copies running around. Even dealers are getting burned reselling them thinking they are making more money but get ripped off with the counterfeits. Mikuni put our a notice somewhere.
Doesn't say how to set the enricher. Or the starting point of the fuel jet
You must have skipped ahead in the video? He literally shows it both in the manual and in the video? @5:05 And the starting points are the base jet that comes in the carb. I'm mentoring under him but if you want him directly join the channel for daily access.
Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
You keep calling them vernier calipers they are not vernier calipers. You have only used dial calipers and digital calipers. Vernier calipers are the ones with all of the little lines on them where you have to match the lines up. There is no dial or digital readout on vernier calipers.
👍
Lost now
Hello,
With over 400 requests a week I'd be typing all day my friend. So many possibilities without more details.
It sounds like you’re ready for some Techline help. Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Seals from '06 are 19 years old? hahaha