If you made that with a CNC it would be Meh, but the fact that you did it by hand is what impresses me. I own a small CNC woodshop and do projects like this all the time, however, the machine does the heaving lifting. I never carve anything by hand. I think you did a fantastic job!
Hi, you are so inspiring to me, being disabled was have to learn something new in life, then I found you. Thank you for what you do. I will follow you as long as you are making new craft. I really what to learn everything from you. Keep the videos coming. I pray a family member follow your trade
Just came across your channel. Great videos and explanations. I'm excited to watch the rest of your videos. Thank you for putting your content out there for us to see!
fishtank5050 I couldn’t buy the CNC bit so ended up buying a Bremel rotary tool and did it that way. I slipped a few times and cut out more than I wanted but as my mums birthday is Tuesday it will have to do. I’ll cut it out with the scroll saw tomorrow and then have a go at sanding the edges with the Bremel. Where did you get the piece that makes the Cnc bit 1/4 inch? I’m keen to be able to try using my router and a bit like that down the track. Thanks
@@fishtank5050 I found them on ebay, so thank you. I'll order one soon. I couldn't wait for ebay this time. I finished it last night. What bit were you using on the end of your Dremel to sand? It didn't look like the sanding attachments that came with mine.
Great video. Loved the dremel burr to give depth on the ribbons. My comment would be about boiled linseed oil will yellow your piece over time. I would suggest 50/50 tung oil and citrus solvent.
Just stumbled on your channel excellent content new subscriber,any chance you could put a link to your choice of CNC router bits. Now watching the other projects. Regards Chris
Thanks for the sub loads of different cnc bits to fit a router,dont forget you will need a collet.rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F172213663526
Loving your work, engraving wood is something I've never considered before but I will now. Where do you get your graphics from, they're very good? Best regards Terry.
Thankyou Terry I appreciate the comment, I normally search Google, just put templates or stencils ,even silhouettes after what you are searching for..like celtic cross template....
The bit shank is 3.175mm so you need an adaptor reducer 6.35mm so they fit a 1/4"shank router..if you check my latest videos I've started putting links in the description 😉
Great job! turned out beautiful. Thanks for sharing your time and talent!
Thank you I appreciate your comment 👍
If you made that with a CNC it would be Meh, but the fact that you did it by hand is what impresses me. I own a small CNC woodshop and do projects like this all the time, however, the machine does the heaving lifting. I never carve anything by hand. I think you did a fantastic job!
Thank you ,it's just a hobby for me so I'm happy to take my time and hand route..all part of the enjoyment of the piece 😀 👍
Bellísima cruz,muy buen trabajo!
Thank you 😊
beautiful Celtic Cross,great demo as usual, loved it, thanx 4 sharing God Bless
Thank you Donny, I'm pleased with this one, just goes to show what you can make with basic,cheap tools 👍
Your a inspiration, I could listen to you all day, So calming and educational...Thankyou
Thank you Paul, I appreciate your comment 👍
Great video! Very talented.
Thank you,just a hobby for me,i appreciate your comment 👍
Hi, you are so inspiring to me, being disabled was have to learn something new in life, then I found you. Thank you for what you do. I will follow you as long as you are making new craft. I really what to learn everything from you. Keep the videos coming. I pray a family member follow your trade
Thank you Gail I appreciate your comment, I'm always trying different things from router to scroll saw to resin and carving..😁👍
this is another great looking project
Thank you,this one takes me back a bit..👍👍
Just came across your channel. Great videos and explanations. I'm excited to watch the rest of your videos. Thank you for putting your content out there for us to see!
Thankyou for the positive comment, I base my videos on the beginner,so i tend to talk to much..Haha
I need to stop browsing YT Heres another project to try.Lovely work beautifully carried out.Thanks
Thankyou..i get alot of ideas from YT ....
That Cross is beautiful!
Thankyou..it turned out ok for my first one..
Great job
Thank you 👍
Lovely video, thank you!
Thank you 😊
That's really neat,top job
Cheers
Tim from Wood 4 Nothing
I am pleased with this one..cheers Tim
@@fishtank5050 you should be mate it's really cool
Cheers
Tim
WOW!!! looking for how to make my mum a celtic cross for her birthday. Now I feel confident to try it. Thank you so much :)
Thankyou for the positive comment,give it a go, the end result is worth it..
fishtank5050 I couldn’t buy the CNC bit so ended up buying a Bremel rotary tool and did it that way. I slipped a few times and cut out more than I wanted but as my mums birthday is Tuesday it will have to do. I’ll cut it out with the scroll saw tomorrow and then have a go at sanding the edges with the Bremel.
Where did you get the piece that makes the Cnc bit 1/4 inch? I’m keen to be able to try using my router and a bit like that down the track. Thanks
@@tashapalmer4519 it's called a collet, I get mine from Ebay but Amazon sell them also,I hope your project turned out ok..
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F191938780949
@@fishtank5050 I found them on ebay, so thank you. I'll order one soon. I couldn't wait for ebay this time. I finished it last night. What bit were you using on the end of your Dremel to sand? It didn't look like the sanding attachments that came with mine.
Great video. Loved the dremel burr to give depth on the ribbons. My comment would be about boiled linseed oil will yellow your piece over time. I would suggest 50/50 tung oil and citrus solvent.
Thanks for the comment, I've never kept any of my projects so a wouldn't know about the colouring, I've used Danish oils and tung oils ..
Very nice, you're making me want to have a go at some CNC bits...
I can not recommend them enough, great little things and really cheap..thanks for the positive comment..
Respect
Thank you 😊
Just stumbled on your channel excellent content new subscriber,any chance you could put a link to your choice of CNC router bits.
Now watching the other projects. Regards Chris
Thanks for the sub loads of different cnc bits to fit a router,dont forget you will need a collet.rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F172213663526
Hi there, are you using 20 degree bit
Yes on this one,I normally use 20 or 15 degree bits nowadays 👍
What is the width of the wood you started with? Let me tell you this you did a damn good job, looks beautiful!!
Thankyou, the wood size was 8.5"W x11"H..I wish I had gone bigger now..
nice job Could you do a video on how you make your templates? Thank you for what you do.
Just Google celtic cross template, plenty to go at ..
yes I know how to find art work. How do you size the art work?
@@redwood1957 I use a app called rasterizer,its free or just crop from my phone,a4 size..
Loving your work, engraving wood is something I've never considered before but I will now. Where do you get your graphics from, they're very good?
Best regards Terry.
Thankyou Terry I appreciate the comment, I normally search Google, just put templates or stencils ,even silhouettes after what you are searching for..like celtic cross template....
Brilliant
Thankyou, I appreciate the comment..
Seriously I’m very impressed. Your videos inspire me .
@@waynebreier1682thankyou, I base my videos on the newbie to the hobby,so I tend to talk to much..but I'm working on that..Haha
fishtank5050 talking good i’d rather tutorial to explain. Keep up the good work
What size are the bits
The bit shank is 3.175mm so you need an adaptor reducer 6.35mm so they fit a 1/4"shank router..if you check my latest videos I've started putting links in the description 😉
Where did you get thetemplate
Google celtic cross template..😉👍
thats awesome
Cheers bud.iam pleased with this one..
could you link the template? Thanks
Search celtic Cross silhouettes..plenty to go at..
images.app.goo.gl/YWH9pWnQYMENuNkP6
@@fishtank5050 Great - Thanks - Vielen Dank - Greetings from Germany
@@norbo1536 no problem, hope yours turns out great..😁👍
Whats this
What's it look like..