LOL you may as well stick to a Double Uni,these are no better and suck for casting through the guides.Not one is even close in strength or cast-ability to a FG. For years huh? There's been books and cheat cards made for decades for almost any knot you want to tie.......
@@rider660r I've tried attaching mono to fluoro using these kinds of knots e.g., alberto knot and I swear it kind of cuts into the line and breaks off at the clinch spot.
I've been using the modified Albright that I learned from your channel for inshore fishing and it has never failed . Easy to tie and remember how to tie when out fishing. Thanks for the close up videos!
Any knot that requires doubling the leader back on itself is going to create a bulky connection that will catch on your guides and ultimately reduce the knot's strength. Also, they don't work well with any leader material higher than about 20 lb test, because it's is just too difficult to get heavier mono or flourocarbon to coil up neatly like shown in these videos, because of the large difference in diameter and stiffness between the braid and the leader. If you want the strongest / thinnest connection between braid and leader, use one of the knots that creates a weave of braid around the leader, rather than something that doubles the leader over (FG, PR, SC, etc). Anything else might be easier to tie, but it will be much more likely to fail. If you're targeting crappie or smallmouth, no big deal, but if you're targeting bigger, saltwater gamefish, take the time to learn how to tie one of the weave knots.
Τελευταια συναντησα εναν που ονομαζεται GT ωστοσο αυτα που κυκλοφορουν με αυτην την ονομασια μονο το οκταρι της πετονιας φτιαχνουν ιδιο το δε νημα εχει μια περιεργη πλεξη που δεν μπορεσα να καταλαβω,ωστοσο σκεφθηκα να τον διπλαρωσω παρεμφερει με τον κλασικο γιουνι''
@@russellsteele3293 I can tie blindfolded and it’s never failed me. 😊🤙🏽 I guess with heavier line maybe it can get catch in micro guides but I never have much of an issue.
I have been using the FG for years and never had a break at the joint. Couple of times I hit a really bad snag and had to pull the line free. Both times the leader broke at the swivel never at the FG joint. The FG is also the best for casting when I use the wind in leader. (Leader joint Upton the spool).
LoL I still use FG knot and I'm a Crappie fisherman, it's just such a versatile knot that works great in Freshwater too, plus if a big Flathead hits my jig I won't have to worry about how strong my connection is.
@@MrSpeedyNYC Not really, have you never caught a Hybrid or big Largemouth or Flathead on a Crappie jig, plus I fish a lot of snaggy areas so it's nice to be able to tie a 20-30 foot leader as it gives you lots of reties. I also use high vis so having a long leader helps too for more finicky fish as well, people say Crappie aren't line shy but I feel like some of em are especially the big ones.
i had a hard time learning the blood knot and these 3rd method helps me. i usually use 0.6-0.8PE with #2-3.5Carbon , alberto knot and these easy version of blood knot are alwayz the second option of FG which i usually tie it at home first.
Salam satu hobby bang 🤝🏽🎣.. Terima kasih perkongsian cara ikat knotnya bang🤝🏽🙏🏽 Salam silaturahim bang,moga sihat selalu dan bertambah sukses bang 🤝🏽✌🏻
Been watching your videos and appreciate the content. Wondering what brand those clippers/scissors are? Can't seem to find any that do a good job on braid.
So I see three problems: 1. nothing can have 200% of anything. It might be 100% but thats also not true. 2. This knot has a loop. We all know that braided line cuts loops. 3. Cause the Knot is made in opposite direction as a FG knot the cut end shows in throwing direction, so the knot is not moving easily through the rings. So the fluo carbon can't be very long. 0/10 won't use over FG.
When you are tightening up the knot there is a risk to break it or damage the line. If it is not tight enough, when jigging or twitching, dynamic jerking pulls out the fluoro line out... That's why I am highly recommending to finish all of these knots with some safety ending. Half hitch etc.
Double uni never lets me down. But I never cast knot thru the guides, instead I keep my leader short (1-1,5m) and retie it when it gets too short. Great demonstration👍
@@stonefly7158 here you go bro Fishing Line Plier Curved Nose Scissors Braid Split Ring Fish Hook Remover Wire Cutter Holder Stainless Steel Saltwater Resistant amzn.eu/d/3Kb6LOf
The strongest knot is the pr knot, tied with bobbin ending with a risutto. The problem with the first knot is the knot by the leader which will catch in the guides it's a 50% knot. There's no 200% knot.
The "200%" is purely clickbait shit don't exist but I would say there's some knots that can achieve 120-130% strength because most lines advertise the breaking strength a little lower than the actual breaking strength, a good mono line can have sometimes 150% of the strength advertised I really like the Trilene XL smooth casting it's a great line with thinner than average diameter it's 6lb is as thin as most 4lb line.
Ive done this knot also and it failed 4 times out of 5 ! Jve done a version of the Alberto when you fold over the mono put a over hand knot in the center of fold over . It locks the knot so braid cant pull off the mono
You need to start with a knot in the monofil, then turn the multi around the mono and go back with the multi to the start and put the multi trough the knot of the mono. Otherwise it makes no sense. So the pink is the mono line. Is that right?
This knot is will not run smooth through the guides. Still looking for a good knot. Using FG for now. These knots hang up on the guides when the load is heavy . Especially during casting.
The FG is a very good knot and relatively easy to tie it with a technique. I use a weight to hold my spectre.,.. the wraps are easily made and the tension is perfect.
For big game, your not beating an FG or PR knot period. As the pressure gets higher, the knot cinches down on itself getting even stronger. Its never failed me, line always breaks first.
100% agree. Even seen it with my own eyes as you said, line will break anywhere but the knot. Particularly the pr knot. Only knot I would say was 100%+
Boa noite amigo gostei de ver esse laço que se dá na linha eu não aprendi fazer ainda mas estou quase conseguindo me inscrevi no seu canal sou brasileiro sou alagoano sou pescador tamo junto Me inscrevi no seu canal
Шутите?😂 Вы видео хоть смотрели, что он там вяжет... так канаты можно вязать, но не тонкий шнур! Первый узел, это просто треш! Плетёнка на одном узелке держится😂
THANK YOU so much for these vids!!! I've been asking for things like this for years and everyone has treated me like it's all top secret!!!
Glad I could help! your welcome Chris
LOL you may as well stick to a Double Uni,these are no better and suck for casting through the guides.Not one is even close in strength or cast-ability to a FG.
For years huh? There's been books and cheat cards made for decades for almost any knot you want to tie.......
@@rider660r absolutely true lol
@@rider660r How many wraps should I use on the double uni if I'm attaching 6lb seaguar fluro to 4lb mono?
@@rider660r I've tried attaching mono to fluoro using these kinds of knots e.g., alberto knot and I swear it kind of cuts into the line and breaks off at the clinch spot.
I've been using the modified Albright that I learned from your channel for inshore fishing and it has never failed . Easy to tie and remember how to tie when out fishing. Thanks for the close up videos!
Thanks 😊
Any knot that requires doubling the leader back on itself is going to create a bulky connection that will catch on your guides and ultimately reduce the knot's strength. Also, they don't work well with any leader material higher than about 20 lb test, because it's is just too difficult to get heavier mono or flourocarbon to coil up neatly like shown in these videos, because of the large difference in diameter and stiffness between the braid and the leader. If you want the strongest / thinnest connection between braid and leader, use one of the knots that creates a weave of braid around the leader, rather than something that doubles the leader over (FG, PR, SC, etc). Anything else might be easier to tie, but it will be much more likely to fail. If you're targeting crappie or smallmouth, no big deal, but if you're targeting bigger, saltwater gamefish, take the time to learn how to tie one of the weave knots.
Τελευταια συναντησα εναν που ονομαζεται GT ωστοσο αυτα που κυκλοφορουν με αυτην την ονομασια μονο το οκταρι της πετονιας φτιαχνουν ιδιο το δε νημα εχει μια περιεργη πλεξη που δεν μπορεσα να καταλαβω,ωστοσο σκεφθηκα να τον διπλαρωσω παρεμφερει με τον κλασικο γιουνι''
So which knot do you suggest?
@@Asly65 personally, I use the FG knot to connect leader to braided line. Very strong, very thin, and not all that difficult to tie.
Sure, but most people aren’t targeting massive fish and these knots will do just fine.
Pretty knots… 😊 Personally I go with the Double Uni, all day haha super fast, small, and never lets me down 🤙🏽
thanks buddy good choice
It's a great knot for when you ate learning, but can't cast through guides
I like the uni knot hell it is about the same as all others to me tell me if I am wrong
@@russellsteele3293 I can tie blindfolded and it’s never failed me. 😊🤙🏽 I guess with heavier line maybe it can get catch in micro guides but I never have much of an issue.
I have been using the FG for years and never had a break at the joint. Couple of times I hit a really bad snag and had to pull the line free. Both times the leader broke at the swivel never at the FG joint. The FG is also the best for casting when I use the wind in leader. (Leader joint Upton the spool).
Thanks for sharing these great knots bro and have a great weekend, bless you and your family. Greetings from the Netherlands, Pat. 👊🏼👍🏼🎣🇳🇱
a million thanks Pat God bless😍
LoL I still use FG knot and I'm a Crappie fisherman, it's just such a versatile knot that works great in Freshwater too, plus if a big Flathead hits my jig I won't have to worry about how strong my connection is.
That's just being silly. For crappie? Come on, man.
@@MrSpeedyNYC Not really, have you never caught a Hybrid or big Largemouth or Flathead on a Crappie jig, plus I fish a lot of snaggy areas so it's nice to be able to tie a 20-30 foot leader as it gives you lots of reties. I also use high vis so having a long leader helps too for more finicky fish as well, people say Crappie aren't line shy but I feel like some of em are especially the big ones.
The knot is very perfect, we can try it right away, uncle. healthy greetings always for all of us👍💪💪
Thanks a lot buddy
i had a hard time learning the blood knot and these 3rd method helps me. i usually use 0.6-0.8PE with #2-3.5Carbon , alberto knot and these easy version of blood knot are alwayz the second option of FG which i usually tie it at home first.
Thank you buddy
For large PE 3up, the second tutorial is perfect for leader 40lbs up. And for a small PE with a small leader number three is perfect
Very good :camera focusing on the line! Thanks!
Thanks my friend😍
This is one of the best videos I’ve seen yet. Thank you!
Try next time with thicker fluorocarbon like 0.8 mm or 1.mm. Thank for your ideas
Thanks for the suggestion Adrian👍
Tali simpul yang sangat rapi dan halus, dan mudah untuk di ikuti.. trimakasih telah berbagi ilmu tentang cara simpul tali ini.. sukses selalu
Makasih Kawan
@@GeneFishingTV sama sama kawan dan salam kenal
Channel ini emang jago banget kalau soal nyambung menyambung
Thanks a lot my dear friend 😊
very nice sirr , greeting to indonesian country fishing
Makasih kawan
I am I fishing man and I like you videos 👍
Glad you like them, Thanks a lot brother 😊✔
Use this connection from trout to big tuna.. great connection
thanks
That first knot reminds me of a crazy Alberto but with an over hand knot. Good video thanks
Salam satu hobby bang 🤝🏽🎣..
Terima kasih perkongsian cara ikat knotnya bang🤝🏽🙏🏽 Salam silaturahim bang,moga sihat selalu dan bertambah sukses bang 🤝🏽✌🏻
Whats the best knot for braid to leader other than using a swivvel barrel which imo has never failed me if you use 100lb+
congrats tight lines👏👏
Nice knots ❤❤❤
Thanks buddy
Enjoy the knot videos! Very helpful. Can you please direct me to the place you bought your line cutters?
thanks friend here you go. bigshipdubai.com/?fbclid=IwAR3Ze4XthtxuWhKQ7z5AEgzhPLcCKz4mfAFjWYNLhAxO6e-c4vzw2rx4pwk
I been using double uni knots for the longest times but this looks real tidy!
thanks 🙋♂️
❤❤❤❤ Thanks for sharing master Gene 🧬 🎉🎉🎉
thanks alot u make it look so easy
You're welcome Chai😊
Been watching your videos and appreciate the content. Wondering what brand those clippers/scissors are? Can't seem to find any that do a good job on braid.
Thanks Kevin the brand is Littma
Black mono , pink braid , should be a yellow background???
thank you for your guidance.
You're most welcome
🇺🇸🇺🇸 those were the only three fishing nights I really use very good strong knots Bob Elkhart Indiana
nights?
So I see three problems:
1. nothing can have 200% of anything. It might be 100% but thats also not true.
2. This knot has a loop. We all know that braided line cuts loops.
3. Cause the Knot is made in opposite direction as a FG knot the cut end shows in throwing direction, so the knot is not moving easily through the rings. So the fluo carbon can't be very long.
0/10 won't use over FG.
Geeze after 3 mins I thought my head would explode! Nice knot though
When you are tightening up the knot there is a risk to break it or damage the line. If it is not tight enough, when jigging or twitching, dynamic jerking pulls out the fluoro line out... That's why I am highly recommending to finish all of these knots with some safety ending. Half hitch etc.
Thanks, but it’s the double uni for me.💯
Tanks for imformation very easy this is
knot
Nice tutorial the update version of that's knots thanks brother
Glad you like it thanks 😊
Waoo mantap. Salam persaudaraan dr sragen ya
Maksih kawan
I learned, brother.
Thank you very much
Glad to hear that
jos mase ..tutorial sangat ber manfaat
Thanks a lot brother 😊✔
This is knot crazy !
Thanks for sharing this technic 🙏🙏🙏🙏
makasih kawan
God job brother .. 👍👍👍
Thank you so much 😀
@@GeneFishingTV a lot learned how to tie hooks and others
Nice one thanks for sharing this knot i will try this one
You’re welcome master😊
Double uni never lets me down. But I never cast knot thru the guides, instead I keep my leader short (1-1,5m) and retie it when it gets too short.
Great demonstration👍
We do the same buddy 1 or 1.2m max lenght of my leader
Thanks for this.
Thanks for watching buddy
Watching master thank you for sharing always connect 😊
Thank you too master
Good knots, but, if you will take a 0,245 braid as a main line and 1,0 fluorokarbon as a leader ( for pike) what is then ???
Thank you for sharing this tutorial master! 🙏❤️❤️❤️❤️
Always welcome master
It is no alternativ to FG
FG is the one and the only 😁
Sou inscrito e gostei muito. Parabéns
Thanks a lot Rocha
Why have tag ends at the leader end! Only going to catch on guides. Love how well you keep your vids in focus though. Nice work
Thanks
Can i ask what clippers or scissors your using? Thank you
Its called fish fliers available in Amazon
Didn’t see anything on amazon the said fish fliers can you post link?
@@stonefly7158 here you go bro Fishing Line Plier Curved Nose Scissors Braid Split Ring Fish Hook Remover Wire Cutter Holder Stainless Steel Saltwater Resistant amzn.eu/d/3Kb6LOf
Thanks guest we can’t get them in USA but thanks anyway
Thanks brother 🙏
Welcome Agus bro
Luar biasa...izin nyimak mas bro...salam silaturahmi dari kawan baru sekligus pemula 🙏😊
Makasih kawan 😍
I have seen the third know before. Cant recall its name, but have used it with success a few times. What is it called?
It's called blood knot on a TKnot process
Thanks for sharing master Gene.🐟🎣
salamat master
Ikatan nya sempurna nih sobatku
makasih bang😍
Very helpful and easy…Thank you Master…..🎩🎩🎩
You are welcome master
Nice video, well done, followed you in every video.
A million thanks Gabi😊
First one is a Slim Beauty tied backwards.
I thought it was backwards. Them tags are gonna catch the guides.
Thank you so much very good 👍 nice
Thanks my friend😍
How strong for maximum drags...??
Очень хороший учебный фильм.
Спасибо друг.
Фильм просто замечательный, только узлы редкое г...
👍
It's been a long time since the comment
Just like video 😁
hello brother its been long time where have you been I hope all are well
The strongest knot is the pr knot, tied with bobbin ending with a risutto. The problem with the first knot is the knot by the leader which will catch in the guides it's a 50% knot. There's no 200% knot.
The "200%" is purely clickbait shit don't exist but I would say there's some knots that can achieve 120-130% strength because most lines advertise the breaking strength a little lower than the actual breaking strength, a good mono line can have sometimes 150% of the strength advertised I really like the Trilene XL smooth casting it's a great line with thinner than average diameter it's 6lb is as thin as most 4lb line.
@@Gstar5150 Δεν καταλαβα τιποτα
Ive done this knot also and it failed 4 times out of 5 ! Jve done a version of the Alberto when you fold over the mono put a over hand knot in the center of fold over . It locks the knot so braid cant pull off the mono
Nice, can me trying..
i like vidio vlog fishing,ilove fishing
Thanks buddy
Nice Knot thanks for sharing
Thank you too
I think the conjunction with the blood knot is highly discouraged between braided and nylon
Keren sekali kawan 👍👍👍
makasih kawan
You need to start with a knot in the monofil, then turn the multi around the mono and go back with the multi to the start and put the multi trough the knot of the mono. Otherwise it makes no sense. So the pink is the mono line. Is that right?
pink is the braid line (main line) buddy
Can I use for braided line
Yes of course buddy
for what
I like it and i'll try
thanks master
mantab master gene joss 😍😍😍
Makasih kawan 😊😍
FG is the strongest
Sangat sempurna Simpulnya 🙏
makasih kawan
That’s great, but the FG knot is still smoother. Buy hey, even the FG knot eventually breaks from the friction with the eyelets.
Yes correct you should make new Fg knot from time to time otherwise it will break to due to overuse
This knot is will not run smooth through the guides. Still looking for a good knot. Using FG for now. These knots hang up on the guides when the load is heavy . Especially during casting.
Try the Crazy alberto knot, close to as strong as the FG and much easier to tie. Goes through the guides well too.
The FG is a very good knot and relatively easy to tie it with a technique. I use a weight to hold my spectre.,.. the wraps are easily made and the tension is perfect.
I agree... FG knot still better..
Never run a knot through guild's. I don't see why anglers would want to do so. The friction wear and tear will always fail you.
Try a double uni knot I've never had this knot get hung up through the guilds b4
Good job 👍
Thanks 👍
Good
I never tried it with 80lbs leader, I will try and share matte
Easy bro and work
Thanks brother
Terima kasih oom atas info ya,,
Mampir oom😁🙏🙏🙏
Keren bang makasi dah berbagi
Thanks for sharing
Thanks for watching master
Mantap best
Makasih kawan
Bermanfaat,sangat membantu
makasih bang😍
Daniel dos Santos gmrrido 😊😊
Mi amigo Daniel
I always use the third way
For big game, your not beating an FG or PR knot period. As the pressure gets higher, the knot cinches down on itself getting even stronger. Its never failed me, line always breaks first.
100% agree. Even seen it with my own eyes as you said, line will break anywhere but the knot. Particularly the pr knot. Only knot I would say was 100%+
what is the name of the 1st knot? somebody knows? Thanks
The first knot is a reverse carrot knot
Thankyou
You’re welcome 😊
What's the second knot called?
Boa noite amigo gostei de ver esse laço que se dá na linha eu não aprendi fazer ainda mas estou quase conseguindo me inscrevi no seu canal sou brasileiro sou alagoano sou pescador tamo junto Me inscrevi no seu canal
Узлы крепкие, но шумные. Классическая "морковка" пока лучшая.
Шутите?😂 Вы видео хоть смотрели, что он там вяжет... так канаты можно вязать, но не тонкий шнур! Первый узел, это просто треш! Плетёнка на одном узелке держится😂
Я только что понял, что это и есть морковка😂
excelente
3 fishing knot very easy
Yes, thanks my friend
Ok bagus hasilnya
Makasih kawan
Try this knot using 50lbs fluorocarbon. I bet join is thick.
Полезные узлы я тоже такими пользуюсь! Кому интересно заходите в гости!
thanks buddy