@@homemade_101 ok ,i used bc547 previously but bulb not glow... and in my circuit problem is current is flow from output wire of transformer only for approx 1 second..bro. after using 2222N this will be solve.. please tell me.
kitne ampiar ka transformer hai sir mere paas ek 6-0-6 transformer 7 ampiar ki hai us pe kam krega ye aur aap ka transformer kitne aimpiyr ka hai sir please bataiye
You know Ic like those are very difficult to get the two signal to work in-push pull I realize that the capacitor valve and is the bigger issue with push pull so the two signal don’t crash together because I try this a the time signal crashes into each other and I try the same A102j capacitor valve and the signal still crashes so I leave alone and now I get my oscilloscope I try it again and the two signal or not push pulling the signal or two of the same high side I try every capacitor valve in A102j and the signal still never push pull so I don’t understand how you get it to push pull even though I use the same component as you so I don’t really believe this I know one the two mosfet can work as one but the mosfet get hot so I use the tl494 and the same thing happens with the A102j capacitor even though the data sheet said it’s the valve to use the push sensor only invert signal upper-zit to each other with 0.33 capacitor only every other valve capacitor stop the push pull action so mostly the Ic only work 0.33 with every ic to puch pull 0.1 capacitor will crash the mosfet together causing a nasty short circuit
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
S5080 emiter on left ,but your text on video show, emiter conneted to 470ohm resistor.why?
Thank you, bro... Sorry, it is a mistake. 470 ohm connected Colector.
your projects are very good. I realy like. You explain every things. Thank you. 😇❤️🙏
Thank you..
Thanks 🙏🙏🌹❤ sir thanks for video
welcome bro...
Brother kani Watts ha 150w kay fan chal pagal
Yes this circuit is 200W
Thank U sir. for your ideal project shearing with us. best wishes for u.
Thanks and welcome
😃👏👏👏👍I gonna DO one
Can i replace s5080 transistor and use bc 547, and replace irfz44n and use irfp 450 transistors
plz check data sheet
Where can I access the data sheet
Can,I use B 2222N or Bd140 in place S8050..which is correct.
you can use 2222N
@@homemade_101 ok ,i used bc547 previously but bulb not glow... and in my circuit problem is current is flow from output wire of transformer only for approx 1 second..bro. after using 2222N this will be solve.. please tell me.
@@homemade_101 please reply my query...
@@shivendra.1285 Adjest preset up 50 HZ
@@homemade_101 or in telegram or in WhatsApp... and bro please visit video at ( 2:40 )...
Thanks for sharing
Is it really 3000w or less? Please answer. I need it
no 100w
So why did you write 3000w?@@homemade_101
Where can i access the data sheet
Is it real 3000watts or not
Is it step down 10A transformer, 12 0 12 ?
yes
Electric device like fan will run???
don't use the fan, Motors.
Can I use mini 104 j capacitors?
no problem.
Can I use two pcs of 104 j capacitors
you can use a 104j one and a 103j one. different types of capacitors use. Because of this, is frequency control.
kitne ampiar ka transformer hai sir mere paas ek 6-0-6 transformer 7 ampiar ki hai us pe kam krega ye aur aap ka transformer kitne aimpiyr ka hai sir please bataiye
Ko no problem 6 0 6v bus try. 5A transformer is best
Sir mere paas stabilizer ka 7 old new transformer hai sab 6.0.6 7 ampiar ka hi hai koi trick bataiye jis se usi ko bana skun Mai 🙏
Bataiye sir
Sir 7 ampiar ka bataiye kya krun us se ban payega ki nahi inverter
mình có thể lắp thêm biến áp cách ly vào để kéo nhiều mosfet hơn không
yes
can i use 11v 0 11v 5 amp round transformer
Ok no problem. You can use
It's step down transformer 10ampere?
yes step down 10a
If battery voltage drops to 11 or 11.5 volt it will still work ?
@@infinity1921 10v not working
It is mean 12 ×250 ampere??!!!!!😊😊😊
Hello bro use pulse transformer in this circuit on next video
Okey bro..
0 12 ka
hola amigo como puedo ponerle 6 o 8 mosfet mas
Yes you can.. 6 or 8 mosfet use
Sir ji mosfet ke value kitane hai.
I don't know your country prices mosfet. Nomal one mosfet is 0.5$
why you are ne555 ic?
mosfet drivie
ruclips.net/video/maFjOoUy6bY/видео.html
Bro. Please check my message on facebook and please reply....
Hi is it possible to use the same circuit with 2 head transformer?
And can you please show the circuit on the pepper ?
Thank you
yes, copper. not heting
You know Ic like those are very difficult to get the two signal to work in-push pull I realize that the capacitor valve and is the bigger issue with push pull so the two signal don’t crash together because I try this a the time signal crashes into each other and I try the same A102j capacitor valve and the signal still crashes so I leave alone and now I get my oscilloscope I try it again and the two signal or not push pulling the signal or two of the same high side I try every capacitor valve in A102j and the signal still never push pull so I don’t understand how you get it to push pull even though I use the same component as you so I don’t really believe this I know one the two mosfet can work as one but the mosfet get hot so I use the tl494 and the same thing happens with the A102j capacitor even though the data sheet said it’s the valve to use the push sensor only invert signal upper-zit to each other with 0.33 capacitor only every other valve capacitor stop the push pull action so mostly the Ic only work 0.33 with every ic to puch pull 0.1 capacitor will crash the mosfet together causing a nasty short circuit
Not even close to 3000 watts.
30 watts might even be hard to do based on the wire gauges being used.
Please reply..help me.
This is not 3000wats its 300
The video is cut. And its edited
Yes this is edited video but 100% real.