Easily improve your DDR5 XMP's performance // for ASUS motherboards
HTML-код
- Опубликовано: 7 июл 2022
- text version: / easy-sk-hynix-68846947
Get MemTweakIt here: community.hwbot.org/topic/209...
My Patreon: / buildzoid
Teespring: teespring.com/stores/actually...
Bandcamp: machineforscreams.bandcamp.co...
Twitch: / buildzoid
Twitter: / buildzoid1
Facebook: / actuallyhardcoreovercl...
#RAM #DDR5 #overclocking #ASUS #intel #Z690 #B660 
Наука
Hi Buildzoid, the reason your Aida latency benchmark is inconsistent is because windows is still doing things in the background after rebooting. Run it in safemode and it’s super consistent.
i tried it in safe mode and it was very consistent. It was ranging from 0.1ns higher some times and 0.1 ns lower but very close and latency was slightly lower as well
Yes but that's not a realistic test because you aren't going to be using your PC in safe mode.
@@t7274 The point is you're comparing differences between tuned and untuned memory. Of course you want to remove as many variables as possible...
When i hear the words extreme tweaker all i can think about is some guy doing meth.
lol
Is there a really a difference? 😕😁
got a ballin ddr5 kit and an asus board just this week, so this video is very appreciated ❤
Should IVR transmitter voltage always be the same as your two dram voltages? In other words I'm applying these subtiming improvements to a existing memory overclock that's running at 1.5v, so should IVR transmitter also be 1.5v?
This video helped me a lot setting my xmp to be stable on z790 Asus board with gskills , which did not want to be stable on the stock xmp profile, thank you!
I just tried these values on 2x16gb of corsair ddr5 6600 (hynix) ram on a hero z790 board (13900k), but it's slightly unstable giving one error on test 5 of absolute anta memtest. Which timings can I tweak to give full stability, maybe tweaking tRFC and tREFI?
I have now tried 3 different versions of Mem TweakIt but it wont start giving me, the "Error during driver initialization" Is there any alternative software for on the fly timing adjustment? I have Windows 10 and Asus B660 motherboard
Hey forum, is there a Samsung B-Die DDR5 timings OC video or any AM5 RAM tuning on this channel? I just bought a 5200Mt CL40 KIT and pushed it to 6400Mt on AM5 no problem with 1.27V, so I am looking to improve the perfomance further with tightening the timings, but I have no idea what these chips are capable of with Ryzen memory controlers. I'll just probably do it one by one, but with the horrible boot times on AM5 motherboards, I'd love to see some tested results so I can go from somewhere. Thank you!
Couldn’t get a stable 6600 oc before, now I can with your settings! Thanks a lot! Only one setting was greyed out, but everything still works fine! I’m glad I got the same exact kit as you, made things easier
Did you use the same exact voltages and timings as this video?
@@MrDutch1e I did, sadly I couldn’t get 6600mhz to be fully stable.. went for 6400
@@bibbolegend3507 what did you get for latency in aida64. I'm at exactly what he's got in this video and I'm getting around 63ns average but I'm only on a 12700k.
Why when i load my xmp1 or 2 profil i got error bios ?
@@CristianoRonaldo-zy3pq getting the same thing and asus just shrugs there shoulders
Hey BZ, I’m still struggling with DDR5 a year later…I know this is an older vid but I’m trying to run these Corsair Vengeance 4x32gb at 6400mhz, which is what the DIMMs are rated for. Any DOCP I, II, or Tweaked profile won’t boot. I feel like it needs to be manually tuned even to hit 4800 or 5200. If I bypass DOCP and set to manual on an ASUS X670E Hero can I use this voltages and sub timings?
Hi if anyone can help me I have a Asus Z690 Formula, 12900k and 2 x 16gb DDR5 Corsair 6200mz Dominator Platinum Memory and I can’t seem to get XMP to work at all I’m currently on bios version 1505, every time try and run XMP all I get is message saying posted in safe mode of bios, no idea what to do to get the 6200mz that bought memory for please any help would be massively appreciated
Awesome content, as always!!
Are there or will there be ddr5 banks more "suitable" for Intel 13 gen CPUs? somehow or for some reason at the hardware level. (ignoring the MHz frequency)
Hello i wanted to say that i have an i7 12700 k + mb same as u+g.skill 6400 trident. I did the exact value from your video and i get only 100 point more on 3dmark. Then i set the first timing at 30 37 37 and i got an improvement of 1000 Point on 3dmark. As for the latence in ns i got first time by defaut xmp 62.10 then with your setup 59 then with the changing of first timing 56. I dont know if i can improve it ??? Tx your for all your work it s very usefull.
Hello, I have an Asus b660a gaming edge 6000mhz(O.C) wifi ddr5 motherboard and when I open gskill 2x16 32 gb cl36 ram 6000 mhz xmp 3.0, I get a blue screen error. I have no problems in games, especially at 5800 mhz. I can run it at 5800 mhz when xmp is not turned on. ?
Hey Buildzoid, i now that its a little bit offtopic but do i need active cooling for b-die when i have my cpu cooled with Be Quiet Dark Rock 4 pro and my case has decent airflow? I have Fractal Design meshify c with modded front panel ( i removed foam filter from it) and i have 2x 140 at front and 1x 120 at back noctua nf fans. I don't see how i could put any fan under my ram without going into LC or getting smaller cpu cooler. I was going to use ~1.5V on Patriot Viper 4400cl19
maybe a little niche, but I'd like to request a subtimings guide for dual rank DDR5s as well! for instance G.Skill 64GB 6400MHz CL32 kit (2×32).
Have u Found out the subtime for that 😂mine is sitting at 70plus ns which is awful
Any luck in overclocking it?
I second this
He has a video on the timings with 4 dimms
ruclips.net/video/mQVHlIS1lz0/видео.html
i updated my bios to v2703 (latest), i set my XMP 1 on, then started crashing in all games. few days later i set my XMP to disabled, set everything default, rebooted to windows, it ran fine. went back into bios to re-enable XMP to 6000mhz like before at XMP 1 and it now works. weird. z690 tuf gaming plus wifi, hyperx 2x8gb 6000mhz xmp ram. also, is it normal for the PC to restart several times with an orange light, then run fine after a few restarts & load into windows properly on when i enable XMP to 1?
The link for the memtweekit doesn't work. It just loads a splash warning screen but has no options
Hey team! I went for G Skill Z 7200Mhz 32GB kit and applied most of these timings. Working great! Used 1.48v for the VDD and VDDQ and Transmitter, but have a nice BeQuiet fan directly on the DIMMs and they stay under 39 degrees. Have got 7600Mhz at CL36 stable!
Can you create a similar tutorial for the newer Hynix A-die RAMs with 7200 MT/s and above? Just tried these settings on my Corsair DP 7200 CL34 sticks with ASUS Maximus Z790 Extreme and the system would not post to BIOS.
hey, i get the principle about getting the main timings down reduces latency but i still dont really know what any of them mean let alone the subtimings, how do you make heads of tails over all of them? is there more fundamentals you need to learn before even attempting this? i dont think i will ever play with subtimings but where do you start on learning any of this information. i cant find any "memory timings for idiots" so to speak
me too bro..thanks for the awesome well needed and wanted vid!!! got a z690 apex board and just bought trident z5 6400 hynix kit bout to get right and get tight baby!!! thanks again!
did everything you did and runs great! THANKS MAN!!!!
system agent to run cinebench needs to be 1.25 for same setup as buildzoid but different ddr5
also doing a ai oc...
I have 32Gb TridentZ 6400CL32 and I'm getting 55MB/s reads which seems horrendous? Do you have to run this benchmark after a fresh boot and close all other tasks etc?
Hi BZ, so , I know this video is a year old, but I'm running an Asus motherboard B650M-A AX II with DDR5-6000Mhz RAM and a Ryzen 7 7800X3D chip and its crashing my games, when I underclock the RAM to 5200Mhz it runs fine.... I updated the BIOS on the Asus Board, but still crashes. Any ideas what could be causing this or how to fix it? thanks
Does it work with hynix ddr5 bigger than 16gb? Like 48gb stick x 2 dual channel for 96gb setup?
I have the Z690 e wifi mobo and rampage ddr5 5200mgHZ (2x16 with all four slots filled in for a total of 64g of ram) can i use these settings to get my ram to run at 5200 mgHZ?
I wish there would have been more videos like this for the z490 chipset because learning to tune my RAM on my Maximus Hero XII was quite the learning curve. BTW some bios updates have come out for z490 that gave some serious stability gains for RAM overclocking
overclocking the 12900K is a PITA on ASUS AiOC, total inconsistent results with my G-Skill Trident 16x2 ddr5 6000 36-36-36-72 at XPM I profile and AiOC CPU overclocking enabled with an 89 value on the Predictive setting (which is supposed to dial down expectations). I get up to 5200 to 5400 speed but voltage spikes are ridiculous at 1.43v (idle) to 1.49v and sometimes higher when gaming or doing stress or benchies. So crashes occur while gaming if both are set (XMP & OC). It's hard to overclock anymore, it's a real shame that Intel can't build these 12900's to crank out at least a single-core of 5.5 or so. I mean, yea, i would get a 13900K and slap it on the z690 mobo, but I'm paying $550 for 500Mhz and what am I going to get, like 2 to 3 more FPS at the most? Probably yea. I listen to Buildzoid because in his 13900K video he spells out how ridiculous it is anymore to get these chips to OC at worthwhile values and heat. The average gamer has an AIO cooler on their CPU not a custom water block, which doubles the cost of gaming (EK water block). I realize my RAM is friggin' junk (G-skill are Samsung memory chips) after spending a fortune on the ram early in the game. What a tragedy of events as I ho-hum my way through the tulip patch at 4900.
@@dabneyoffermein595 @dabneyoffermein595 The 13700k would upgrade your Single core very close to 13900k and get the same FPS, for 430(€) and still have comparable Multicore to your 12900k, do you really need more Multicore? Swap to a 13700k and then to 14th gen next..
Z490 doesnt have ddr5
I had to translate to MSI BIOS, but these settings were a solid improvement for my GSkill (Hynix) 6000/30 kit. It ran these advanced settings at 6000 CL30 at stock 1.35v. Only thing is the latency at lower inject delay seems poor in Intel MLC, over 100ns, compared to 50s at the high end. That spread seems high compared to some tests you have shown (70s low to 50s high). Which settings affect that most if I study the more advanced guides?
If windows or any program is doing anything in back ground when you run the tests, the ns benchmark will be all over the place. Restart in safemode and try the memory tests to get consistent data.
Hey! I have the Gskill 6000mhz ram too! Question so I've activated the xmp 1 profile at 4800mhz Max so am I to understand if I change these timings will this give me the full 6000? Is there anything special I need to do otherwise ?
@@housebaelishgaming did you figure it out? Your mobo might not be able to handle the 6000 speed, but it most likely should (if it’s a decent z690). What I would do is f5 default your settings, and manually set your ram to 4800mhz, also set your DRAM voltage to what’s listed for the kit you bought (most likely 1.35v or 1.4v). Assuming your kit is the trident z5 6000mhz CL30 kit, enter all the ram timings as he has it. Then boot and if it does boot, restart your PC, raise the ram MHZ by 200 (no need to change the voltage again at this point unless it’s unstable), and if it boots raise by another 200mhz. Keep repeating this in steps of 200mhz, until you reach the 6000mhz. Sometimes if you set the mhz too high at first it won’t boot due to memory training and the motherboard not being built well for DDR5, but you can achieve the speed by letting the memory get trained and only taking it up in steps of 200mhz. Hope this helps.
@@jacob4816 I did figure it out I needed newest bios
If you happen to have that translation to MSI's BIOS names handy could you share it?
Will these work with the ROG Maximus Hero z790 and Corsair Dominator DDR5 6400? XMP makes this memory unstable.
Is this copy settings also work at my system?
CL 6000 hynix a die
Asus z690-a prime
13600kf
Or should i change some settings ?
I can only get down to 63ns (59 on a lucky run) with these exact settings with my hyperx fury 6000c40 (set to 6200c36 as in the video). I'm only on a 12700k with b660 board but you'd think identical memory settings would be close.
Great Guide for DDR5 improvement 👌but my ASUS ROG Strix B660 G-Gaming dont work with the MemTweakIt link. In BIOS is Realtime Memory Timing enabled. Can you help me?
Gonna try these settings on my Asus Z690i ITX board with my 12700k. I bought CMK32GX5M2B6400C32o which is an SK Hynix kit though im not sure if its A die or M die. I had no idea about the IVR transmitter voltage needed to be 1.4v, i've left it at default so maybe that explains my stability issues at anything higher than 6600mhz.
Edit: Do these settings work for SK Hynix A Die too? @actually hardcore overclocking?
Well, I left the timings that were lower as is and lowered the ones that needed to be changed. The only one I couldn't set lower was the tPPD=2, soon as I change it to 0 it would auto go back to 2. 3DMark CPU went from 22536 to 22816, AIDA64 Read went from 102.66 to 104.75 GB/s , Write 102319 MB/s to 100.72 GB/s , Copy 100576 MB/s to 100.16 GB/s and Latency stayed at 59ns it has gone down to 56 or 54 before can't remember which. Any ways I got a boost so I will take whatever I can get so thank you for the video.
Hi I'm running all the timing the same as in this guide and the ram is running at 6400 MT but i started at 70 latency and now im at 65 which is 10 slower than yours any ideas why that could be please.
How do we extrapolate this config for A-Die sticks? I'm under the impression that M-Dies run tighter timings.
Did you ever test these with A die kits?
Won't train after 2204 bios update and can no longer downgrade any suggestions? was 100% stable on 1304 until I updated.
Do these tweaks work with ANY Corsair Hynix DDR5 RAM. For example mine is Corsair Dominator Platinum 6600 MT/s CL32 2x32GB with Hynix A-Die. Will these tweaks work, that is can I follow your suggestions on subtimings 1:1?
is this a random board purchased? or picked by asus? considering we now have to bin $500 -$1500 motherboards aswell.
I have the corsair dominator 5600mhz DDR5 I just followed this whole video and I had to boot in safe mode. Any suggestions?
i have this is my ram: Gskill DDR5 Trident Z5 RGB PC44800 32GB (2x16GB) Dual Channel - F5-5600J4040C16GX2-TZ5RS
the speed is 5600mhz. i am very new to RAM overclocking. is there a guide for this RAM kit? this is also a samsung b-die, is it good for overclocking?
Is there similar guide with parameters for DDR4 ASUS Motherboards? @Actually Hardcore Overclocking
I notice that you increased the refresh interval by more than 10X, and I've seen you do similar things in other videos. It seems unlikely to me that DRAM designers are overestimating the refresh requirements by such a large margin, especially since refresh has substantial power cost. How sure are we that regular memory stress tests are creating the kind of conditions that are most difficult for data retention?
Warning, I don't really overclock memory for a living or anything.
I heard that the main reason is that of course the memory has to meet some kind of spec and usually that spec involves being in some extreme (for us) temperatures. As in, like 40-50°C ambient temps and such. However, for homes usually it's 23-27°C which I think would decrease power leakage (since lower ambient temps = lower RAM temps = less leakage) and therefore you don't need to recharge it as often. Idk about the tests being a good estimator of memory though but in my experience you could basically always crank the tREFI really high unless you're super concerned about your data
Hello! Got Mobo Asus Rox Strix z690 DDR5, CPU 13900KF, RTX 4090. Some time ago I had DDR5 Corsair Vengence 5600. Somehow it worked with XMP at 6000, but the results was much worse. Before I saw the video I lived the noral life )) So with Corsair 5600 32Gb (2x16) it is R-50000, W-44700, C-48000, L-72. But when put my new DDR5 Kingston Fury Beast 6000 64Gb (2x32), it never sucessfully loads up with XMP I - always comes up with the BSOD. It only boots normaly with the XMP set to 5600. And the results are surely even worse - R-45000, W-39000, C-44400, L-82. Any advice?
Trfc1 is gray/blocked on my msi z690 motherboard how can I change it to 333?
Is it possible to do for MSI boards ? especially unify X. You are doing gods work
So you kind of need your Asus board to even boot with either of the xmp profiles? Still waiting for the bios update for my prime z-690 that allows either xmp profile to boot my fury beast ddr5. Go Asus!!!
Shit tried this on trident g skill 6000 kit and couldn’t get it to run at all. Even if I tried increasing voltage to 1.45. Tried to loosen timings and still nothing.
With these settings on MemTest86 I get errors on moving inversions 32-bit pattern when temp hits 54c. I loosened both tRFC/tREFI and yet it still happens. Any guess what could be the problem?
Motherboard: Strix Z690-F (latest bios & ME)
CPU: 13700k stock (86 sp)
Ram: Kingston Fury Beast 5600 cl40 M-die
Set your fans to max
@Buildzoid, im running a kit of kingston fury beast ddr5 6000mhz cas40 that absolutelyn wont run these settings. Infact nothing i try with them seems to run, i think this hynix kit is pushed at its limit allready unless my board (asus z690 Gaming E) is preventing me somehow. I really wonder as i hear hynix should easely be able to do more than these.
Got the same kit as you. Mine does 6000 30-36-36-28 with bullzoids subs @1.4v vdimm just fine. I think you might wan´t to check your memory controller voltage. I set mine to 1.246 volts.
My mobo is a b660strix-f.
Edit: as I was typing this, I heard you say I can use these settings with speeds up to 6800. Maybe I'll just drop them to 6600.
I have a 14900k on the new ROG Strix Z790-E Gaming WiFi II that claims to be capable of 8000mhz DDR5. Thought I had it stable until last night. I plan to lower my 2x24 kit to 7200 tonight since i had a 2x16 kit stable at 7200. Can i use these settings with those speeds?
This is nice please can you help I have a 6000MHz RAM and it cannot be accessed. When I do xmp and enter, it gives me a blue screen. I tried, but what I found is 5400MHz. I did not use the timing because I do not know how to do that please some help I have z690 f gaming i9 12900k
Will this work with 6400 C32 on AM5? Want to try this out for a stable 6400. Asus Tuf x670e mobo.
Hello, this is very helpful as I know nothing about this type of OC info. That said, would this translate to a ASUS z790 Maximus extreme MB with the i13900k, using Corsair Dominator Platinum 7200mhz? 2x16.
Thanks in advance!
Hey hey,
I have an asus b660-a ddr5 capeable motherboard with a new i5 13600kf cpu, also have 2 sticks of ddr5 6000mhz 16gb so its 32gb…
Its only works on 4800mhz.
I went through the process what you just showed in the video. Waited around 15 minutes but nothing happens after the restart, seems like no boot at all. I put the voltage from 1.35000 to 1.40000 V as my voltage was already 1.35000.
Any advice anyone?
Its just sad to spend more money on rams which not working as it should be.
Thank you❤❤
So is it okay to (try) to these subtimings on other D5 kits on ASUS so long they’re sk hynix? Say I use adata 6000 kits
Yep, seems the main difference between Hynix-based sticks is how high they will clock
You saved me from formatting my pc. Thank you so much
Works just like that and about same performance increase. Great free performance 💪
I absolutely don't wanna know whats those timmings are, but is it safe for everyday gamming or actually for hardcore overlocking?
cant get these to post at 8000 when changing the timings and voltage from xmp tweaked, using 2x24gb gskill kit, its fully stable at 8000 xmp tweaked. the only main difference and potential issue i saw is that i cannot set the timing DRAM REF Cycle time , its grayed out, while i can set DRAM REF Cycle Time 2, which is what i did... but like i said it wont even post.
May be a niche case but if you have any advice on manual timings on EVGA kingpin z690, I'd greatly appreciate it!
the timings in this video should work on any motherboard as long as you have Hynix DIMMs and aren't pushing north of 7000Mbps. IDK if they work above 7000mbps because I can't do speeds that high on any of my boards.
Any articles, videos, documentation, literature, etc that describes the background of what all these timings do?
I have Hynix-A die ram (6400Mhz CL32) overclocked to 7200Mhz CL34 1.45v. What's a good tREFI for this, im asking because i've seen a lot of videos and the numbers are between 65000 to 130000!
Asus Hynix 7600MHz profile sets the tREFI to 262K on Z790 Apex. Don't know how stable that is though. Probably needs good cooling
cool .. if i want 6400Mhz same setting or must be change something plz reply @
How do you get memtweakit to work? I've had the program forever now but haven't found an answer. z690 maximus extreme, 13900k. tforce 5800 cl 36
Why when i load my xmp1 or 2 profil i got error bios ?
To confirm, will these kits work on the Apex z690? I don't see them listed on the QVL, so just want to be sure before I hit buy. (totally new to overclocking)
There should be some SK Hynix based kits QVLed for the Apex.
bro, what's the prob, my timing road works fine on XMP mode, i can put best timing for me like CL32 - CL34, if i press MANUAL mode it doesnt work even for CL38, what the hell? other settings absolutly same.
I have 2 16gb kingston fury beast ddr5 5200 ram cl40. Would I be able to get to 5600 or 6000 on my asus z790-h gaming motherboard?
BZ, question for you. Trident Z 6000mhz 2-16 kit, asus x670e-e mobo. I went into the uefi and in tweaker I don’t even see a EXPO-1 or Expo-2. I see a couple of DOCP options. I tried DOCPII and saved. It booted ok, but could run a file of cinabench with out crashing. Back to OG and it runs cina all day with decent scores but my 6k speeds shows something like 4800mhz ?! Mobo shows latest bios but that is the only thing I can think of, besides my trident set not being expo compatible?!?! Which seems hella odd to me. Any help ? Or anyone here have any similar issue?
expo-2 is "safe mode", expo-1 are fast settings
My pc keeps frezing when using xmp. What should i tweak?
Would these timings also apply for the "TEAMGROUP T-Force Delta RGB DDR5 Ram 32GB (2x16GB) 6800MHz PC5-54400 CL34" kit you recommended in your DDR5 video?
I'm about to upgrade my 10900k/z490/DDR4/4000 to a 13700K , DDR5 Team-group 6800MT/s CL34, ASUS ROG Strix Z790-A Gaming Wi-Fi LGA. Wondering if I can run these timings ?
Sucks kuz I'm just starting to get my head around DDR4 & now I'm going to DDR5.lol.. Oh and love your videos, they are prefect for ADHD/OCD people like me …..
Yeah it’s Hynix A die, you’ll probably need to run the tRFC a bit higher (400-500 ish) and the tRRDS/L at 4 & 8. Unfortunately one of my dimms is defective so I can’t test for myself until the new kit arrives in a week or so. Just run a memory stress test like TM5 or Kahru for a few hours and if there are no errors you’ll be fine 👍🏻
Ran Memtest for 1 hour 0 errors.
@7200MT/s 👍
@@IIHydraII Thanks bro! this actually helped me. Told me basically what I need to dial back some. Took a bit of trial & error but it worked and allowed me to implement all his other settings on my $190 Teamgroup 2x24 cl34 7200mts M-DIE kit, on my cheap-ass Asus z790-plus motherboard and i7-12700k CPU (both were on sale for about 200 each). Made a huge difference too! I was getting terrible latency times in AIDA64. Still not quite as good as Buildzoid's in this video, but from 76 to 57ns @6200mts cl32,38,38,28. Probably can eek out a bit more but I'm good for now 👍 and yeah I know, the RAM was definitely an overkill/non-economical choice considering the other combined gear but I really didn't know what I was doing when I bought all this stuff and thought one day, I could throw in another similar 2x24gb kit when cheaper for 96gb total RAM... but after watching/learning from a couple of Buildzoid's videos, it will probably perform terribly, if at all. 😢Not sure if its worth returning though. any maybe TMI but just wanted to thank you.
Maxxmem2, dude.
Best quick test! It helped me.
Thanks for the video Buildzoid, the link you provided to ROG's Mem TweakIt is the first version I've managed to successfully launch on my Z690 Hero board! I'll definitely be trying your setting out today as I have the Dominator Platinum RGB 6200's which I believe are also SK Hynix M-Die.
A question... is it possible to get 1T timings working with DDR5? I've had zero success with either DDR5 4800 or 6200 kits.
1T depends on the motherboard.
@@ActuallyHardcoreOverclocking seems to be only the Dark and the Unify ITX
@@ActuallyHardcoreOverclocking thanks for the video. I got these settings working on first try on a z790 gigabyte gaming x with 13700k running only pcores with a Kingston renegade 6400 c32 Hynix mdie. However latency down not go below 60ns. However the only timing o could not find on the gigabyte board is the tpt timing
thanks for the video! working real nice on my kit, though I'm using 1.435v, g skill 6400 cl32 kit
you use the exact same timing he has in the video on the 6400 kit?
@@RagedFPS hey, not exactly, I had to turn up the tRAs a bit to have full stability and also had to change CPUs because the first 13900k sucked
@@CarlosDiaz-is8cu ok thanks for the info. Got me a little scared to mess with it. Im a complete novice to it and don’t want to mess something up.
@@RagedFPS ah ok good luck! just be careful with the voltage, and you will be fine, go max like 1.45 if you have 2 sticks of ram or 1.435 like me if you have 4, they get hot but nothing will happen, crashes most likely
9:38 probably will not work with Samsung
Mine cant do tRRDS-4 tfaw-16 without errors
Same with tWRRD_DG and tRAS
hi, I have Corsair 32gb ddr5 5200mhz C40 on a 13900kf, Rog Strix z690 gaming E.. can anyone help with a starting place to timing adjustments?
Im on ddr4 have 21790 2x16gb 4133 cl 14-15-15-34 cpu 5.2ghz 4.0ghz cache 4.2ghz is bad or good
I have the neo trident ddr5 6000mhz ram kit, but my bios allows me to select EXPO Tweaked . If I have Tweaked available would that be better then the manual timings or worse or negligable?
This timings are for Intel cpu's bro.
The only one I can’t change is dram ref cycle time, it’s greyed out, any idea why?
Same on my Z790-f. But mine wont even post, tested the settings 3 times now, but no luck.
Great videos. Can you do an Asus ddr5 manual oc vid?
Whats the impact of cpu input voltage? Can I leave it auto?
raising can help stabilizing RAM overclocks as it's the voltage that's used to generate VCCSA and CPU VDDQ
Running a 13900k with asus z790 extreme and 6000 Corsair vengeance and when I turn in xmp it throws a bunch of memory codes
Try bumping the vccsa up a bit
thanks for the video i try this setings on my ASUS Z690 HERO 13900K g skil
2X16GB 6400MHZ IT WORKS GREAT
Hi...do you maybe have this type of settings for Hynix A die ?
Where can you find out if it's Samsung or Hinecks?
Bullzoid your subs are working really nice on my kit!
My hynix mdie kit is currently running on 6000 30-36-36-28. I did try to get 6400c32 stable, but i think that my mobo has issues with higher ram speeds than 6000mhz.
Do you know if stable 6000+ mhz is feasable on asus b660 boards.
my specs:
i5 12400@4800allcore, asus b660 strix-f, 2x16gb Kingston fury 6000c40 ram
same board on me. its stable on me but with 6200 mhz 34-38-38-30 1.25v sa voltage. other settings like the bullzoid video
It’s less about the board and more about the Memory controller on your processor
hey buildzoid random question but what fan do you recommend for cooling ddr5? like 80mm 92mm or 120mm? (planning to get a 1.4 volt c34 @6600mhz and tune the timings on that with a z690 unify x and a 12700k)
doesn't really matter. I'm pretty sure even a 40mm would do a decent job.
@@ActuallyHardcoreOverclocking ok thank you mr buildzoid
First off, thx for an awesome channel and all the good info.
Just ordered a Asus board and Corsair CMK32GX5M2B6000C30 memory. After googling my ass off Ive come to the conclusion that I bought Hynix from the 30-36-36-76. Have I understood this correctly? :)
does same settings work for am5?
Nothing works for me, have 6000mhz gskill set on same board and 12900k CPU can post at 5800 standard xmp2 at 1.35v vdd and vddq super unstable and crashes no matter what I do with voltages even 1.4 and above, got ram cooler sits at 50-60c under load only stable at 5400
I can't change the dram ref cycle value on mine. So it's grayed out. How can I open the value DDR5. My ram G-SKILL 6400 32 39 39 102 but running nice with your Timings
And now i have the 13900k.... heavy cpu. I have the same Radiator with ekw cooler and gpu. How cpu water is your Favorit
Same here its grayed out for ref cycle, did you find a solution?
Followed this guide to the T and it will not work with an Asus Maximus Extreme z690 + G. Skill DD5 6800 and Intel 13900k...
Hmm I don’t have extreme tweakee settings on my Asus board. X670e-a. Been trying to tune my 5600mhz 64gb ram cl36 Corsair dominator but I’m a complete noob with ram :(
I got a X670E Pro Art board, and alot of these settings you are changing, is not listed or doesnt have the same name. Is that due to the Pro Art board being ''stripped down'' on some of these memory settings?
intel and AMD CPUs work differently
@@ActuallyHardcoreOverclocking do you plan on making an AM5 guide?
I bought XMP modules as most vendors here claim they are EXPO when they are not.
Amazing video, so would this work for running ddr5 with 4 sticks, on a z790 strix with I9-13th , but can’t get them to run standard xmp 6200 stable. So only get 4 at base or 2 at xmp,
This seems to be my experience as well.
ROG strix z690-e gaming wifi board and corsair 4x16gb 6200 dominator memory.
I can run 2 sticks at 6200 using built in xmp 1, but trying it with 4 seems super unstable.
Hoping for a AMD video for 6000mhz or so. I'm over here getting 67ns with xmp : /. Also Asus BIOS is waaaaay too different vs Gigabyte, I can't copy almost any of this.
Why i cant load my xmp1 and xmp2 error bios
Does it have any performance advantages to set tRRD_S to 4 over 8 as DDR5 has doubled the burst length?
it helps a little because the memory controller has more flexibity to send ACT commands.