to bad you got none of the good scooters, I have a derbi drd pro from 2008 6 gears 80cc team mhr ported 26mm carb trowing down about 29/30 on the wheel
What is a good platform as far as buying a 2stroke scooter off market place. Something I can put a big bore and expansion chamber on and start making some power?
What’s on that ruckus? What set up is on the ruckus. I’m not sure how fast a ruckus with the stock motor can go with just tuning it with the right parts but I would like to know what setup you have on the scooter you were riding. I have a 2002 Yamaha vino and I’m getting the 70cc big bore kit for it soon. What’s the best setup for it with the stock motor and the big bore kit?
Whats your technique for jetting carburetors plug chops and by feel, or do you put an afr gauge on them? I have a 670cc skidoo 2 stroke snowmobile engine in an old Honda Pilot buggy, and ive got it jetted pretty close by feel and reading plugs, but i think there is some room left.
The cylinder itself is what is making most of the power, the stock cylinder is a cast iron 50cc made for daily driving but this 70cc is made to compete on the 70cc polini/malossi cups on italy And all the other things that it has are a reinforced crank, a 2fast straight pipe exhaust, a polini PVL ignition, a Stage6 air filter, some PWK carburetor, probably 24 or 26mm of size and probably a Vforce replica reed valves
So 2strokes are faster then 4t? 🤔 i might skipped the gy6 swap and get a zuma 125. Do you know if these will bolt on to the maddog 49cc since engine mount is on the bottom?
Hey jack, I'm doing a 2fast build on my aprilia .before i order a rebuild kit do i need a spacer for the 85mm crank? And can you guys weld me a new subframe so my carb faces the rear? Im out here in orlando and would really appreciate the help
If you got a new stock ruckus excluding cost of the scooter how much would a build like that cost lol? I’d LOVE to build a scooter like yours or soemthing
Hey there! I'm about to start a build on a bws 2 stroke 50cc. Did you have a full engine kit you bought? Or did you piece it together? Any info would be so helpful as I'd love to have my 70cc scooter running like yours when I'm done with it! Thanks!!
Any info on the 2fast cylinder? Looking to try that setup.i got a fuel injection kit made for my minarelli engine and want a powerful engine build besides the midrace setup i have.
Jack, what would I need to do for the next 4 years to build the experience necessary to get hired at HP logic? im a 2nd year mechanic, 3 years of apprenticing and it obviously a hobby of mine. Im willing to relocate and do whatever is required to fulfill my dream. Thanks
Mike White a stock yz85 stayed right beside my 06 trx400ex with a full hmf exhaust big gun cdi box and a stage 2 hot cam keep in mind its a four wheeler but its nuts what those little two strokes can do
Jack Cecil Dude, Thanxx for the reply and Thanxx for the quick info!!! Yeah... I see you have that baby hooked up man! It looks mean as hell, Sounds mean as hell, and even through the video LOOKS fast as hell!! And your fuckin pulling wheelies man... Smh like damn bro! Your videos have me online looking for scooters dude lol!! So does ScooterTuning.ca also sell GY6 Engines? At good prices?
Thats not a normal 70cc kit. There are differences between 70cc power units. Low RPM, middle RPM, and high RPM cylinders. The one he as is a very high rpm racing cylinder ''power unit'' and is pretty expensive (around €500). You need ofcourse the correct parts to run it properly such as the CVT transmission etc.
@@killuminatii1 ah ok thanks! Do you have any big bore kit recommendations for a Honda elite af05? Also is it possible to get mine over 60mph for less than $400?
@@motormotto3898 Dont know if there are any fast kits for your Honda. As i can see there is one from Malossi: www.scootertuning.ca/en/cylinders-sport-70cc-cast-iron/1810002-cylinder-kit-malossi-sport-70cc-af05.html
What state u in i still wanna race u bro ill race your fastest scooter u can get ur hands on 2 stroke for stroke lmk ;) mahalo braddah Located in Ohio rite now
This sounds like fun but you ready to race this 2fast jog? Lol I'm sure your Hawaiian setup is nasty I've been following you for alittle while I see everything lol
I used to have a 2stroke jog that was built to pull drag bikes back at the track some super strong springs in clutch it would wheelie everytime coudlnt just floor it.. it was crazy fast more of my friends wrecked on that than anything ever lol i need another 2stroke moped lol might have to ditch my pitbike adventures for some 2 stroke jog adventures
Hey Jack Since you are so much into scooters, you should take at trip to Europe! All the fast scooters are here, especially in Germany, Italy and France. Back in the days (2011) I got the 4th fastest 70cc scooter here in Denmark, a Yamaha JOG AS with Malossi Team Speed, Yazuni C30, 28mm carb etc. made 23,4whp - I would love to race you. Now I love to own a 1990 BNR32 GT-R with HKS 2835 twins :-)
Andreas Holmgård I have a stock generic trigger sm50 (am6) geared of course. I'm thinking of making it a 70cc, do you know what I should do to get 12-15hp my bike produces 5.69hp so that's fuck all. I beat stock 50 Because of my sprocket gearing and carb setup on 100metre strips any further they are nearly over taking me because my bike only does 40mph. I've derestricted it also. And now I've earned some money I was thinking about it and just wanted to hear from an experienced tuner and I'm in UK so I can't have higher than 15hp 😭😭.
70cc 2 strokes???in the hands of a super master mechanic.. 0-100+ mph in just 350 meters its easy'... unforgettable fun days when we were young and stupid
One of the most underrated autologgers
Most definitely.
Nothing beats 2 stroke
1 stroke
@@lukaskellokumpu2252 ½ stroke
Can’t even argue with you. 2 smokers for the win. 💯💯💯
😂😂😂
With the 2fast 100cc you get up to 35/36 hp.
I'd be okay with the 70 2 fast
there is a dude in denmark that got 45hp on a roost havoc 100cc. and that thing was running on racegas.
mikkel bank, fantastisk! 🤣🤙
In 2017 germans got 32whp from aprilia sx 100cc 2fast (goose racing) Maybe near 35hp from engine.
@@vinski240 Last year the french guy "tournois racing" got 44hp from the ROOST 100cc:
ruclips.net/video/03xtmknsLXM/видео.html
Can't wait to switch from polini full race 70 and mhr exhaust to 2 fast 70😍 and 2fast 70 exhaust
Man love how your scooter sounds. Pops wheelies all day i bet.
Your channel should be named “Big Boyz Toys” AWESOME AWESOME AWESOMENESS!!!!!!! Great work Jack and thanks for sharing dude!
You were so young then Jack.
That 70cc sounds strong.
😁🤣🤣🤣🤣^
You should of been in the 1320 scooter cash days
For real I wouldve love to see him agaisnt the winner with the silver gy6 232 with nitrous that would be intense
Do you guys have gilera runner in America? That would be a sick build. 183cc malossi everything 2 stroke
Liam Grant no we don’t. We get nothing cool. 😔
to bad you got none of the good scooters, I have a derbi drd pro from 2008 6 gears 80cc team mhr ported 26mm carb trowing down about 29/30 on the wheel
@@JackCecil look up roost havoc it looks like they make more power than the 2fast and they make kits for mina and alot more
love it jack has all these badass cars and hes playing with scooters lol
With the purple, even though it’s not my choice of color, I’ll admit that is one hell of a nice looking ruckus
What is a good platform as far as buying a 2stroke scooter off market place. Something I can put a big bore and expansion chamber on and start making some power?
Where are you guys located? There aren’t any known 2-stroke motor experts in my area of Orlando. Do you guys help with the build and tune?
What’s on that ruckus? What set up is on the ruckus. I’m not sure how fast a ruckus with the stock motor can go with just tuning it with the right parts but I would like to know what setup you have on the scooter you were riding. I have a 2002 Yamaha vino and I’m getting the 70cc big bore kit for it soon. What’s the best setup for it with the stock motor and the big bore kit?
Whats your technique for jetting carburetors plug chops and by feel, or do you put an afr gauge on them? I have a 670cc skidoo 2 stroke snowmobile engine in an old Honda Pilot buggy, and ive got it jetted pretty close by feel and reading plugs, but i think there is some room left.
Nice Video, whats in that 70cc scooter thats givng it all that speed, do you have some specs or a video on it?
The cylinder itself is what is making most of the power, the stock cylinder is a cast iron 50cc made for daily driving but this 70cc is made to compete on the 70cc polini/malossi cups on italy
And all the other things that it has are a reinforced crank, a 2fast straight pipe exhaust, a polini PVL ignition, a Stage6 air filter, some PWK carburetor, probably 24 or 26mm of size and probably a Vforce replica reed valves
My Yamaha zuma 2 stroke stage6 street race 70cc head yasuni r exhaust 63 mph with 230lbs rider
So 2strokes are faster then 4t? 🤔 i might skipped the gy6 swap and get a zuma 125. Do you know if these will bolt on to the maddog 49cc since engine mount is on the bottom?
Hey jack, I'm doing a 2fast build on my aprilia
.before i order a rebuild kit do i need a spacer for the 85mm crank? And can you guys weld me a new subframe so my carb faces the rear? Im out here in orlando and would really appreciate the help
Brother what kind of scooter do you have? Is that a yamaha zuma? That bastard runs damn good.
If you got a new stock ruckus excluding cost of the scooter how much would a build like that cost lol? I’d LOVE to build a scooter like yours or soemthing
Hey there! I'm about to start a build on a bws 2 stroke 50cc. Did you have a full engine kit you bought? Or did you piece it together? Any info would be so helpful as I'd love to have my 70cc scooter running like yours when I'm done with it!
Thanks!!
Hey Jack, how much would a scooter build like yours be including the scooter?
There's atleast a minimum of $4000 just into his engine.
Any info on the 2fast cylinder? Looking to try that setup.i got a fuel injection kit made for my minarelli engine and want a powerful engine build besides the midrace setup i have.
What bike and what is changed?🔥🤔
Jack, what would I need to do for the next 4 years to build the experience necessary to get hired at HP logic? im a 2nd year mechanic, 3 years of apprenticing and it obviously a hobby of mine. Im willing to relocate and do whatever is required to fulfill my dream. Thanks
I need to know what mods have that beast
Seen cr80s destroy much bigger bikes in a short distance, and not by a little bit, can't touch a 2 stroke on the first couple of feet
Mike White a stock yz85 stayed right beside my 06 trx400ex with a full hmf exhaust big gun cdi box and a stage 2 hot cam keep in mind its a four wheeler but its nuts what those little two strokes can do
Darren Daley yeah I used to race a big bore And my little brothers cr80 race prep would just tear it up on the track lol
what have you done to that 70cc?
Are you willing to tell me you build
Ar you from Florida
What helmet is that
What’s the name of the 2 stroke scooter?? Also, where do you buy GY6 Motors and scooter upgrades?? Where’s the best place to order from?
ViceVersa Musik it was a Chinese scooter but everything has been changed. Nothing is original. Buy parts from scootertuning.ca
Jack Cecil Dude, Thanxx for the reply and Thanxx for the quick info!!! Yeah... I see you have that baby hooked up man! It looks mean as hell, Sounds mean as hell, and even through the video LOOKS fast as hell!! And your fuckin pulling wheelies man... Smh like damn bro! Your videos have me online looking for scooters dude lol!! So does ScooterTuning.ca also sell GY6 Engines? At good prices?
Great video keep up the good work!
How’s the aeros go against the rc390
Yo do you have videos of that triton?
0:01 YES.. SOUNDGARDEN!!👍👍✌✌✌
Where the grom races
Sick! Sean is the guy with the badass SC400 right? That thing is super nice!
FishGameStrong Evan yup :)
How'd you 20 something hp from a 70cc kit? I see it with my own eyes but what work was done to that 2 stroke?
Wondering the same thing haha. I might turbo my scooter, think that'd be sick?
Thats not a normal 70cc kit. There are differences between 70cc power units. Low RPM, middle RPM, and high RPM cylinders. The one he as is a very high rpm racing cylinder ''power unit'' and is pretty expensive (around €500). You need ofcourse the correct parts to run it properly such as the CVT transmission etc.
@@killuminatii1 ah ok thanks! Do you have any big bore kit recommendations for a Honda elite af05? Also is it possible to get mine over 60mph for less than $400?
@@motormotto3898 Dont know if there are any fast kits for your Honda. As i can see there is one from Malossi: www.scootertuning.ca/en/cylinders-sport-70cc-cast-iron/1810002-cylinder-kit-malossi-sport-70cc-af05.html
What state u in i wamma dyno my stroker 2 stroke
What state u in i still wanna race u bro ill race your fastest scooter u can get ur hands on 2 stroke for stroke lmk ;) mahalo braddah
Located in Ohio rite now
This sounds like fun but you ready to race this 2fast jog? Lol I'm sure your Hawaiian setup is nasty I've been following you for alittle while I see everything lol
The ruckus looks cool when it's made to look like a wee mini chopper would take a lot of $ and time though
I used to have a 2stroke jog that was built to pull drag bikes back at the track some super strong springs in clutch it would wheelie everytime coudlnt just floor it.. it was crazy fast more of my friends wrecked on that than anything ever lol i need another 2stroke moped lol might have to ditch my pitbike adventures for some 2 stroke jog adventures
Its that 2smoker nothing rips like a 2stroke
Thanks, now I got to return the kids presents so I can get a scooter 😜! Merry Christmas
Keeway fact/focus?
I challenge both those bikes on my e85 180cc. I'm located in Orlando
Turbo scooter build at some point?
But why? It's a race scooter... He needs gas response right as he twists the throttle... A turbo on a small engine lige that would cause a huge delay
Steve From Smash Mouth are you expecting him to reply to a year old comment 🥴
@@relate97 not really tbh
How does the 70cc engine manage to make as much or more power than the 228cc?
ScMinivanIc if your not mixing gas your not spankin ass. 2 stroke powa
Power delivery is crazy violent on the 2 stroke too that helps a lot in beating bigger engines
size/weight of the riders.
2stroke is much faster then 4
sounds like it revs way faster
How fast is zip
Hell yeah bro nice run
Merry christmas!
They are some good looking bikes. 11:10
Hey Jack
Since you are so much into scooters, you should take at trip to Europe! All the fast scooters are here, especially in Germany, Italy and France. Back in the days (2011) I got the 4th fastest 70cc scooter here in Denmark, a Yamaha JOG AS with Malossi Team Speed, Yazuni C30, 28mm carb etc. made 23,4whp - I would love to race you.
Now I love to own a 1990 BNR32 GT-R with HKS 2835 twins :-)
Andreas Holmgård I have a stock generic trigger sm50 (am6) geared of course. I'm thinking of making it a 70cc, do you know what I should do to get 12-15hp my bike produces 5.69hp so that's fuck all. I beat stock 50 Because of my sprocket gearing and carb setup on 100metre strips any further they are nearly over taking me because my bike only does 40mph. I've derestricted it also. And now I've earned some money I was thinking about it and just wanted to hear from an experienced tuner and I'm in UK so I can't have higher than 15hp 😭😭.
Que buenos vídeos y fui el primer comentario saludos desde México
Manotas1126 gracias!
PULL UP ONE TIME
Love those lil Ruckus'
Them 2ts are like rotary engines smaller but faster 🤣🛵💨
top speed?
Amazing bikes!
Its not the same if u dont tune it to ur weight ? Thats just cheat not a real dyno
I bet the mhr replica would smoke that 4t as well
I wounder why a 232 cant beat a 2stroke??
His 70cc is a racing cylinder with special port timing that hit probably 14K rpm.
You got a scooter that will run as quick as A 250 dirt bike ,where do ya draw the line Jack.
I don’t draw lines. I cross them.
thats A Damn Good Answer
Kranker Roller mega nice😍
merry xmas jack
We need a jack scooter wheelie sticker
How do I make my 70cc Zuma that fast?
Polini or mallosi
jamairo hooister polini
Malossi MHR Speed 7t, Polini Evo 1, 2 or 3.
I would love to own a race scooter
Wish i could take my imported aprilia there to get dyno'd
Spoooooooon maaaaaaaaaan!
Hey, thanks for uploading. You didn’t have to do that today.
Who thinks of ATV Off road Fury when they hear Spoon man?
holy shit that things a little rocket haha wow
but he can't turn that scooter at all. there got to be a better way.
70cc 2 strokes???in the hands of a super master mechanic.. 0-100+ mph in just 350 meters its easy'... unforgettable fun days when we were young and stupid
i want a scooter
👍👍👍👍👍👍👍70cc150km
Spoonman :)
race it against your ferrari.
Fanis B already done with tommy
Not sure which video tho
it has seen some changes. Also it was not his ferrari. Better get some ferrari gap insurance.
Lost power cause your running so rich. Tune that carb! See those fireworks!
OOOOOuuuuu Fack :)
I’m sorry but when that dude said he weighed 160 😂
KDcars he said 260.
Definitely said I was 260lbs
lol
#MAGA
Merry christmas!