WATCH THIS BEFORE YOU BUY THE ICON AIRFLITE HELMET | Motovlog and GoPro Hero 7 Set Up/ Review *FAIL*
HTML-код
- Опубликовано: 27 сен 2024
- -My Camera Gear 📸-
DJI Mavic Air 2 Drone: amzn.to/3lhByst
Sony a6400 Camera: amzn.to/2GKA2Qs
Rode Mic: amzn.to/2GPG4PY
GoPro Hero 9: amzn.to/36kM7Vo
GoPro Hero 8: amzn.to/2JIVBlx
GoPro Hero 7: amzn.to/3eVsoj7
-My Helmet Gear 🧠-
Icon Airflite Motoradd Chin Mount: amzn.to/3kaF2LW
Helmet Mohawk/Warhawk: amzn.to/3lmZ0ok
Sena Headset: amzn.to/2IppG8Z
Helmet Mic: amzn.to/35kF1B7
-Yamaha R1 Parts ⚙️-
Toce Exhaust: amzn.to/36mzc57
Chain: amzn.to/3naZDlb
Rear Sprocket: amzn.to/3eLBTkt
Front Sprocket: amzn.to/2U9SYLt
Bar End Mirror: amzn.to/3peAd83
ASV Shorty Levers: amzn.to/3eLb0gK
Lithium Battery: amzn.to/35i5grP
Tire Stickers: amzn.to/2GKEizq
I KNOW IM NOT THE ONLY ONE THAT HAS BEEN STUMPED BY THIS 🤣😅
I LOVE my Icon Airflite Helmet. The reason I bought it was for the unique look and I wanted to be able to motovlog on it. However, when I went to set it up I realized that the chin mount (using MotoRadd's awesome GoPro mount) set up gets complicated since the GoPro is located on the visor instead of the helmet itself. If you want to lift the visor, it pulls on the microphone cables that you have in your helmet.
Ive seen people mount the microphone on the visor or allow there to be some slack in the wire, but I want a clean set up this time. My last set up with sloppy so I don't want to have another sloppy set up. If you have any solutions that don't involve mounting on visor or leaving slack in the microphone cabling PLEASE LET ME KNOW.
Artman GoPro Case:
www.amazon.com...
Purple Panda Microphone:
www.amazon.com...
the title was a little misleading but all good. i thought this was a helmet review. most of it was about the GoPro setup. nice helmet and bike tho.
I've made 3 other videos regarding my thoughts and experiences with this helmet...check them out if you're interested in just a helmet review! Thank you for watching 🤘🏾
I got the Airflite El Centro. And since I didn't wanna mess up with the paint or the visor, I bought an intercom with 4k camera incorporated. Freedconn and Sena have some pretty good options. So far, no messy cables, easy and secure clip on mount...
In my humble opinion, is not an issue with the helmet, is an issue with the camera.
Ahhhh the classic into…This into used to think was the coolest into I had ever seen…Had to come back & see what mount what you had for your icon airflite raceflite…I had bought a green & black one years ago with the silver face shield & wanna put my GoPro on it…Appreciate you man! This was extremely helpful.👌🏽💯
aw man just noticed the gopro would block the vent intake too
Get the sena and the sena bt backpack.. kills you wire problems and less weight on the visor
I had to go waaaaaaay back here to see if you had this set up and maaaan ok I'm glad I watched it might just do it though but think of other options.... Let's Gooooooooooo
Bro I have this setup with the same mount but I get super shaky footage. Any suggestions. I even put double sided foam tape under the visor to help. It’s better, but still not that good.
Mount your GoPro on the side. Makes it so you can fully open the visor and no wire problems. Probably mount it on the right side since you’ll be in the left lane the whole time😂
Does this helmet break in? I bought one but it's tough putting it on and extremely painful getting it off. But once it's on, it feels good. A bit snug but I figure if it breaks in it should feel perfect. I wore it for 1h. Might get a larger sized cheek pads.
Yes, mine has definitely broken it! It was very tight on me at first as well, but now it fits perfectly. Thank you for watching 🤘🏾 #FastLaneGang 💨
@@FastLaneD thanks a bunch for replying. I might actually get the M size cheek pads. Taking it off doesn't feel right at all.
@@BalkanBiker Man mine was really hard to take off too.. but now after half year of use it's ok and confortable.
when buying icon products you need to add +1 or 2 to your size, I got XL on other brands, when I bought Icon Airflite 2XL is painful to get off.
Def have to break it in. I wore mine around the house for about an hour at a time before before I went riding in it
More than half this video is about the go pro mount lol. Not the helmet. Thanks 😂😂
Try reading the rest of the video title, it’s supposed to be about the setup not the helmet.
I realize this is an old video. But I found an stl file of a go pro mount you secure to the chin pad that comes off the bottom of the helmet. I'm printing it out right now and can let you know how it works after I use it.
Did it work?
@@michaeloliver4556 I did! Forgot to update this. Had to cut out the netting around the chin bar. Glued the printed price to that then snapped it back into the helmet.
@@hfa_ultima can you link the stl file?
Hi buddy what laptops do you use to edit your videos on ?
bro you sound like the rock😳😂 love the video
Very good introduction i am liking your video editing skills and contents.
Hey brother....I have my eye on this helmet for a long time now. I watched your other video when you had it for a month....now that its been months, does it fog? Did you find any solution for the whistling sound?
I have this helmet and I’ve never had a whistle sound
Where’d you cop your visor matched spoiler? That’s dope af fam.
Revzilla
What's the word " FLD " still waitin to hear if you found that video ? Pinks , Vrod vs Old Suzuki , you gotta watch it !!! Cool instructional video by the way !!👍 Man I wish I could upload the video of my 04 Roadstar with my new Roadburner Double Eagles with the baffles out , it Sounds frieking mean 😁 Got me a K&N air intake and did a complete Dynojet jet kit , and now she's legit!!! Need to get me a GoPro to record some of the Awesome Roads out here in the Central Valley in Ca.
Just watched it! That’s crazy!! I didn’t think the Suzuki could pull it off...I would’ve waited at least 30mins to let that clutch cool down in that heat 😅 upload it! I’d love to see it...plus CA is beautiful
@@FastLaneD Ya after I rewatched it , I couldn't believe the guy on the Suzuki got him on the big end , because the dude on the Vrod killed him outta of the hole !!!! Now for the upload , I'll have to figure out how to do it , ya know I ain't a young guy and I'm a tech dummy !!🤣
What’s the visor color?
I want this helmet so bad but damnnnn 290 300 bucks will eat me up
Can I get a link for the gopro J mount
Editing skills fire fam
Thank you Dylan! I appreciate you 🤘🏾 #FastLaneGang 🏁
Going to have to be the cheek mount, I guess.
Why not set up on the side? I was thinking of doing the side since id only use for crash purposes and the fact i'd wanna change my visor from time to time
If you’re using it for those purposes then the side mount would work perfectly for ya! I prefer the chin mount because I think it gives a better 1st person perspective in the vlogs and I don’t like the idea of having this monstrosity on the side of my helmet that would cause a lot of drag. Thank you for watching 🤘🏾
@@FastLaneD yea it does give a really good view but idk if it affects the air coming in from that mouth part. Also when you're at a light or something you're gonna be lifting the visor up for more air, just something to think about from the viewers side. keep up the great content!
wireless mic...
thought this was a helmet review ..
Hey trying to send you a message regarding a different mount.
Shoot me an email bro! Fastlaned93@gmail.com
Pleas try Yoshi on r1 Just try
Send me the money for it and Ive got you! 😆
I bought in white, with gold visor. Look terrible 😛
I bet! Ugly AF 😂 Jkjk...that's an awesome color combo as well! Thanks for watching and commenting 🤘🏾 #FastLaneGang 🏁
Wireless mic. Problem solved.
watch before you buy.... One of the most over used titles in videos. I hate seeing that.
Links for everything?
A helmets very first “pro” audition
The script
If he touches the glass one more time I’m going to loose my ever loving mind.
-glass- “I stay clean if you don’t touch me.”
-this guy- “((fingers and hands move towards face shield and touch and smudge indiscriminately for the entirety of video….and then stick adhesive on it…til there’s no blood left in his fingertips….)))
IRL
-glass- (crying) “I can’t do this, I’m sorry”
My guy this is not even a review on the helmet… buddy just showing us where he places his mic…
💥 Great info bro. Thanks. Newbie rider question… the GoPro has a mic so what is that one used for.??
Whats that visor colour called
Mine is pretty loud thats my only gripe.
Does this helmet fit true to size. I’m considering ordering a medium helmet... I may need a small tho... Decisions
I just got this helmet delivered-fits true to the size and is a little tight..so don’t go down...you won’t be able to get it on..I bought medium as well
No, i had to buy a 3xl and I'm a xl in other brands
hey man, just got my first icon airflite helmet for almost 3 weeks now. i noticed that the visor (Fliteshield) gets easily scratched after a few short rides and its been raining recently and i get dried water droplets on it and also the fingerprint marks makes me feel like an OC person that wants to wipe my visor every time i get home.
How do you deal with the scratches and other stuff? do you just go on with it and move on or it's just the way it is?
Besides my little issue with the visor, overall the helmet is great all around.
The visor is definitely easily damaged so I try to be as cautious as possible. I’ll clean it (as well as the rubatone) after a few rides...but other than that I’m not sure there’s much else you can do. Thank you for watching 🤘🏾
Wax your visor.
Good visor care is also a big thing…. I have the dark smoked visor and I just take a microfiber cloth and soak it in hot water and lay it on the helmet and visor for several minutes to make all the bug guts nice and soggy. That’s a big deal there. If the bug guts are still hard and brittle your pretty much sanding your visor with bug guts. After the cloth has sat I’ll wipe away all the guts and dirt and then use a clean dry microfiber to dry the visor and helmet