Hi Marcel, Thank you for the kind compliments. I'm glad you found some value in it for your viewing time. How is your printer running, is everything all tuned now? Have a great weekend :)
Hi CubanazoJB, Thank my brother, This is an amazing tool once the issues are addressed. It's unfortunate that the manufacturers don't take the time to really consider the end user's experience right out of the box. BTW my parents are both Cuban and I was born in Miami, Fl. Enjoy your weekend :)
Victor, another great video, really enjoy watching all your content. I’m not sure if I missed one of your videos where you address z banding. I have tried multiple upgrades to resolve this issue without success. My latest upgrade is z wobble x, thus upgrade claims to fix all z banding issue, however in no my case it made no difference. Appreciate if you can address z banding issues and fix them for good. Keep up the great work!
Hi ravkhangurra7522, Thank you for your kind comments. I'm glad you are finding value in these videos for your viewing time. What speed do you print at? Are you on bowden or direct drive? What printer are you using? What material are you printing with?
@@ravkhangurra7522 Got it, what about these below? What printer are you using? Are you on bowden or direct drive? What material are you printing with?
Hi Victor, Well done video once again. Very nice upgrade package to resolve some of the main issue with the printer. The Fine Adjustment Mount for the probe is a big improvement over the trim or shim efforts of the past the only thing now is how do we purchase one or two or so? The bed clips are a good refinement over the other clamping methods and will also allow for beds that have been insulated good call. Once again the videos are looking better and better. Keep up the great work and the share. Doug
Thank you buddy, To this day I still scratch my head at some of the design change choices that 3D printer manufacturers make when releasing new products. Instead of improving on a successful model they try and create new models without a deep understanding on what they did right on previous ones. Those bed clips are amazing, I've added them to all my printers. My G10 Garolite bed meshes have a max deviation of .21mm ***NEW ARRIVAL*** Precision Adjustable Probe Bracket - amzn.to/45mgQhw
Hello Victor! This video series is awesome! I made two purchases from your page for the fans bracket and under mount enclosures. The customized linear rail guide and E3D V6 adapter, are you offering those files anyplace? Am I missing them? Thanks! Love your videos.
Hi Jason, Thank you for commenting, encouragement, and supporting my work. I'm glad you're finding value in these videos for your viewing time. The E3D V6 adapter is included in the zip file that came with your purchase. Please give me more details on the rail guides you're looking for so I can understand what to link you?
Hey Victor, my apologies. I’m still new to this and the terminology. I found the adapter in the zip. The other piece I’m not seeing (that I incorrectly called a linear rail guide) I supposed is actually a “back support plate” that you show at 11:50. Thank you for the very quick response!
No worries, Jason, we all started there. The 3D printed bracket wasn't rigid enough so I used the following parts to make it all work. Ender 3 V2 gantry bracket - amzn.to/3R8AIAJ Timing belt - amzn.to/3MPGtAt Unfortunately the original Ender 3 Max Neo belt is too short to fit on the Ender 3 V2 bracket. Let me know if you have any more questions about it. Best of luck with your mods!
@@WhereLegendsTread Hi, Jason, no worries man, we were all started there. The 3D printed hotend bracket was a temporary part to build the other parts around. I ended up ordering an original bracket. Ender 3 V2 gantry bracket - amzn.to/40J6SG4
Greetings Victor, I have just finished up your Probe Adjuster Mount on my 500mm Ender 3 Pro. Sweet... I have sent you an Email with the procedure I used for PETG and Miguel's professional firmware. There are some cautions with that set up. Let me know what you think. Thanks again my friend Doug
Hi buddy, Super cool, that build volume is extremely useful. I'm still playing with my friend's Ender 3 Max Neo and it has the same bed size as the CR10S Pro V2. There are just some things that require a bigger build surface. Thanks for the email, I will check it out later today and let you know. Enjoy your morning, we'll talk soon.
Excellent Video Victor, as you have always accustomed us. A Hug
Hi Marcel, Thank you for the kind compliments. I'm glad you found some value in it for your viewing time. How is your printer running, is everything all tuned now?
Have a great weekend :)
@@vbared I keep adjusting 2 ender that I included a Sprite pro hotend and another Neo ender. But leave this week to leave everything adjusted.
Wow. Terrific work! Cant wait to try it out! Awaiting the other vids as they come out.
Thanks again!
Thanks again Ed, Another video on hooking up the ADXL345 to the BIGTREETECH PI4 + CB1 will be out today. I appreciate your support.
Great vid Victor … thanks as always for taking the time !!
Hi CubanazoJB, Thank my brother, This is an amazing tool once the issues are addressed. It's unfortunate that the manufacturers don't take the time to really consider the end user's experience right out of the box. BTW my parents are both Cuban and I was born in Miami, Fl.
Enjoy your weekend :)
Victor, another great video, really enjoy watching all your content.
I’m not sure if I missed one of your videos where you address z banding.
I have tried multiple upgrades to resolve this issue without success.
My latest upgrade is z wobble x, thus upgrade claims to fix all z banding issue, however in no my case it made no difference.
Appreciate if you can address z banding issues and fix them for good.
Keep up the great work!
Hi ravkhangurra7522, Thank you for your kind comments. I'm glad you are finding value in these videos for your viewing time.
What speed do you print at?
Are you on bowden or direct drive?
What printer are you using?
What material are you printing with?
@@vbared I only print between 40 to 55mm
@@ravkhangurra7522 Got it, what about these below?
What printer are you using?
Are you on bowden or direct drive?
What material are you printing with?
Hi Victor, Well done video once again. Very nice upgrade package to resolve some of the main issue with the printer. The Fine Adjustment Mount for the probe is a big improvement over the trim or shim efforts of the past the only thing now is how do we purchase one or two or so? The bed clips are a good refinement over the other clamping methods and will also allow for beds that have been insulated good call. Once again the videos are looking better and better. Keep up the great work and the share.
Doug
Thank you buddy, To this day I still scratch my head at some of the design change choices that 3D printer manufacturers make when releasing new products. Instead of improving on a successful model they try and create new models without a deep understanding on what they did right on previous ones. Those bed clips are amazing, I've added them to all my printers. My G10 Garolite bed meshes have a max deviation of .21mm
***NEW ARRIVAL*** Precision Adjustable Probe Bracket - amzn.to/45mgQhw
Hello Victor! This video series is awesome! I made two purchases from your page for the fans bracket and under mount enclosures. The customized linear rail guide and E3D V6 adapter, are you offering those files anyplace? Am I missing them? Thanks! Love your videos.
Hi Jason, Thank you for commenting, encouragement, and supporting my work. I'm glad you're finding value in these videos for your viewing time.
The E3D V6 adapter is included in the zip file that came with your purchase.
Please give me more details on the rail guides you're looking for so I can understand what to link you?
Hey Victor, my apologies. I’m still new to this and the terminology. I found the adapter in the zip. The other piece I’m not seeing (that I incorrectly called a linear rail guide) I supposed is actually a “back support plate” that you show at 11:50.
Thank you for the very quick response!
No worries, Jason, we all started there.
The 3D printed bracket wasn't rigid enough so I used the following parts to make it all work.
Ender 3 V2 gantry bracket - amzn.to/3R8AIAJ
Timing belt - amzn.to/3MPGtAt
Unfortunately the original Ender 3 Max Neo belt is too short to fit on the Ender 3 V2 bracket.
Let me know if you have any more questions about it.
Best of luck with your mods!
@@WhereLegendsTread Hi, Jason, no worries man, we were all started there. The 3D printed hotend bracket was a temporary part to build the other parts around. I ended up ordering an original bracket.
Ender 3 V2 gantry bracket - amzn.to/40J6SG4
@@vbared Thanks Victor! I’ll let you know how my mods go. Please keep up the awesome videos on the max neo!
Greetings Victor, I have just finished up your Probe Adjuster Mount on my 500mm Ender 3 Pro. Sweet... I have sent you an Email with the procedure I used for PETG and Miguel's professional firmware. There are some cautions with that set up. Let me know what you think.
Thanks again my friend
Doug
Hi buddy,
Super cool, that build volume is extremely useful. I'm still playing with my friend's Ender 3 Max Neo and it has the same bed size as the CR10S Pro V2. There are just some things that require a bigger build surface. Thanks for the email, I will check it out later today and let you know.
Enjoy your morning, we'll talk soon.