Hello, i changed the injectors on a 3126b all was ok and after a week when is hot it whount start i must wait until is cold then starts quick, can you tell me what to do next thank you
You can get those metal rings with over lapping edges at the caterpillar dealer. I just got those o-rings and the metal rings today for the same engine. While browsing videos I found yours, pretty cool videos. Thanks, keep it up man!
Hey man could I get the dimensions of your tool so I can make one to have in my tool box? I am sure I could get close by just pausing and looking at it and all, but if you don't mind I'd like to know how think the hook is at the bottom and everything? Thanks!
@ jcook007fix your pretty much right... fuel from the tank get drawn from the transfer pump gets filtered, first then heads to the cyl head.... upon where its flown through all 6 injectors.... where high pressure oil is used as a hydraulic piston to push a very small needle and a small amount of fuel "pressed" together creating the high pressure the fuel needs to be when injected into the cyl
A medium lady slipper would work PERFECT for leverage to get those injectors out. Your tool is great for not having anything 👍👌. Great video
Hello, i changed the injectors on a 3126b all was ok and after a week when is hot it whount start i must wait until is cold then starts quick, can you tell me what to do next thank you
You can get those metal rings with over lapping edges at the caterpillar dealer. I just got those o-rings and the metal rings today for the same engine. While browsing videos I found yours, pretty cool videos.
Thanks, keep it up man!
Disculpen cuántas ligas lleva un inyector.
Thanks for the ideas you have contributed here.
Hey man could I get the dimensions of your tool so I can make one to have in my tool box? I am sure I could get close by just pausing and looking at it and all, but if you don't mind I'd like to know how think the hook is at the bottom and everything? Thanks!
Hello, Kind time of day if it is possible prompt what pressure of oil is necessary for work of such atomizer?
I magnetized my Injection wenches so I don't loose bolts as much, there not fool proof but do help.
Thanks. C15 slightly different? Nice detail.
Those injectors look exactly the the T444E, or the 7.3L powerstroke injectors.
@ jcook007fix your pretty much right... fuel from the tank get drawn from the transfer pump gets filtered, first then heads to the cyl head.... upon where its flown through all 6 injectors.... where high pressure oil is used as a hydraulic piston to push a very small needle and a small amount of fuel "pressed" together creating the high pressure the fuel needs to be when injected into the cyl
Only 4 injectors?
What is that silver piping or tube right beside the engine where he is working called
jonathan doyle It is the pipe the carries air from the intercooler to the intake
But what is it called
***** cac pipe
dose not mention the cross heads are in backwards
Q tal tengo un motor Caterpillar 3126 q el aceite del motor se pasa al dicel q puedo hacer
las ligas en los injectores estan mal cambialos y problema resuelto
thank you great help
j'aime le caterpillar
Very god!
Oh look.....powerstroke injectors.... LOL