Repairing Caterpillar Bulldozer Diesel Engine || Rebuilding CAT Inline 6 Cylinder Diesel Engine
HTML-код
- Опубликовано: 29 июл 2023
- Repairing Caterpillar Bulldozer Diesel Engine || Rebuilding Caterpillar D8 Bulldozer Inline-6 Cylinder Engine
#caterpillarenginerepairing
#catdiesel
#machineshop
#dieselmechanic 
Авто/Мото
Everyone knows they individual jobs absolutely fantastic to see a group of men rebuilding a cat engine to a very high standard ,
I find it totally Amazing that the engineering of Caterpillar incorporated is so sophisticated as to allow this type of maintenance to be performed in the Dirt with essentially bent STICKS for tools. That it ever runs is a tribute to the engineering quality that went into it.
These guys are very good mechanics. I really enjoyed watching them rebuild this engine. Thank you for posting.
❤❤
Молодцы делают,как умеют,без всяких динамо ключей
Great work, congratulations, Rio de Janeiro brasil😂
The Limbo Rock
You guys would be limbo stars
No benches in this shop
What mechanical geniuses!?!
Amazing!
My best compliments!
Reconditioning an old CAT turbo-diesel motor!
Alex.
I support their efforts to do a good job, but I am very lucky indeed to live in a modern and progressive society where things are done in a better way. Just my luck I suppose.
Момент затяжки гаек измеряется в [индус-на-метр]
до искр из глаз
Схуяли? В начале видео бугеля затянуты Динамо ключем
New cylindre must assembled with New piston
The wrong way to do things, the sleeves would have benefited from equal pressure at the same time using a single screw and two bars of metal to force them in more evenly. Rings shouldn't be applied to the pistons dry. Should pay attention to your o rings and never Force ANYTHING. I saw the torque wrench out once, everything on that diesel should have been torqued to spec, as well as loctited to ensure the bolts don't back out, and pipe dope on any bolts that go through water passages if any.
Yes they could benefit from better tools, but i think proper training would benefit them more.
Why don't you go over there and tell them that to their faces if you got guts
Fantastic video!
Nice. Extremly relaxing to watch a long episode as this ! Perfect ! :-)
Делали делали но так и не запустили
every time they tighten a bolt im like,,, click,,,,,,click
I like these videos, BUT what these crews do is refurbish these engines. There is a world of difference between overhauling and rebuilding. This same project would cost BIG bucks at a CAT dealership where the mechanics are instructed to replace any component that doesn’t meet specifications. My guess is a complete rebuild of this engine at a CAT dealer would run more than $20,000 USD.
Plutôt 30 000 ou 40 000€ chez cat.
Bon travail les amis 🫵👍💪 mais attention aux pistons réutiliser 👋🇫🇷🇫🇷🇫🇷.
😂😂sz😢@@becassier410
No doubt these guys are brilliant 👏 👌 but what I don't like is dirty places. They don't care about clean and hygienic places for work.
They never throw anything away: an old belt for the hoist, even an old soda bottle for the oil.
The millennial’s could learn from this
Great workshop floor,dust, grit and dirt .
These guys are great they are very smart and work hard well done fellows you guys make no excuses and get shit done
Like👍👍👍👍👍👍👍👍👍👍 nice video,,,,,
Молодцы мужики привет из России
Very good, greetings to you
Привет из России ! Успехов вам ребята !
Great perfornance in the open air👍👍👍
Imagine getting work visas and bringing these guys to C&C equipment in Indiana at that huge shop with the bulldozers
I did not see anyone inspecting the welchplugs😂😂😂😂❤❤❤
That’s a hell of a torque crunch
Good job big boss 💪💪
these men are so professional at their work,they work so well together
Amazing what they can do with the lime Ted tools and supplies it would take a fortune of sufisticated line of tools to do what they do with a screwdriver and a pair of pliers ! Great skills !
Excellent work keep it up 👍 ❤
Awesome team work on a tough job! I enjoy watching your videos 😎
ललजवल वव
Good job torquing rod bolts to 190 footlbs total screw up
I think i would be trying to find certified cat mechanics to fix it. I don't think warrantee would be a word they understand.
This was an old engine so I'm pretty sure the warranty expired some years ago.
@@laserbeam002he means warranty on the rebuilt engine
Бугеля коленвала и гайки гбц последним этапом протягивают соответствующим моментом(динамометрический ключ), обратите внимание те, кто ниже пишет про это
A good way to ruin the piston ist to install the rings this way.
OLÁ. É o legítimo motor "ecológico". Montado em terra forte. Agora é só adubar
I am disabled I would love to have all these guys around me to work and help I have tons of tools and money the women cook and Feed Us
ESSE MOTOR PELA APARENCIA D342 CATERPILLAR EMINHA MOTOR APLICAÇÀO DIVERSSAS
Putting the old slugs back in new liners?? Those slugs have already done so much work it’s false economy to reuse them, they’ll fail through the gudgeon pin and destroy the block at some point.
TOP TOP TOP 🇧🇷🇧🇷🇧🇷
Excellent workmanship. Well done. And very good video
Gostei do vídeo tbm! 🇧🇷
p
E top demais 🤝
Pretty tough job.i love this types of job. Because I was doing same job
The only thing that looked out of spec to me was the pistons lots of scuffs on the sidewalls and skirts
بہت عمدہ..مگر انجن سٹارٹ ھو یا نہی...چند سکینڈ اس پر بھی دے دیتے..
При капиталке двигателя разве поршни ставят старые хоть и новыми кольцами ?
Тем более на вид поршни уж такие облдранные
well those old pistons should slide easy
Great 🎉🎉🎉🎉🎉
What did you put/appl on the head gasket?
I saw a lit cigarette next to both of the fuel filters being filled with fuel diesels very safe but still lower safety standards
Well...that wont run for very long....totally not surprised that the video ends before we hear it purring like a kitten.
Very nice❤❤
De cuánta silindrada es el motor 👍👍
I saw the chain wench and I jokingly thought "WOW, next will be an actual torque wrench." And I wasn't disappointed.
Awesome dork wrench?
Caterpillar parts delivered by FedEx are still going to be expensive in any country
OF COURSE we’re a Caterpillar authorized remanufacturing facility! why would you even ask?
these guys look like they know what they’re doing, but I doubt there’s a calibration certificate for that torque wrench…
How many hours for a total tear down and rebuild plus parts and cost? Roughly? Thankyou 🇨🇦😄
Questi lavorando sono preistorici
warum schrauben die den motor nicht gleich in der sahara zusammen ????
how much torque on main caps? oh about 4 feet of cheater bar worth
Torques bolt head, conrod, main bearing
I will feel very happy if I get a chance to learn with you
You would be learning the wrong way to do things too.
En 3:05 no será peligroso aumentar el brazo a esa llave par apretar esa tuerca....al igual que en 6:20....!!?
Why are you stealing thumbnail images?
похоже они его так и не вали.
Pretty cool they spend all day making that huge engine then ride a goat home.
Contamination Control ….😂😂😂😂
We can always complain and pick little gripes but that thing will run just fine besides the parts the labors super cheap
Did this in the shop the other day😅
These guys do it outside in the dirty
こう言うのじゃないんだよなー。
折れたクランクシャフトを溶接で継いだり、穴の空いたエンジンを塞ぐとかの修理をこのチャンネルには求めてる
Very good 👍
👍👍👍👍👍
Que le pasó en el dedo? Pregunta mi hijo. Gracias.
This whole build was awesome until I saw those ITR filters...
Alguien se ha fijado donde cahe el aceite del carter....??
Y allí no passa nada...😢😢😢
Хоть я и не моторист, но на это больно смотреть
А что не так?
@@grischapupker8258 наверное все, так собирать моторы только индусы могут, это пиздец
@@grischapupker8258 песок по всем внутренностям двигателя
@@grischapupker8258 если это капиталка, то почему новые кольца, на старые поршни и в новый цилиндр?
Where is this?
Pakistan..
Perdon....cae!!
“Click”
These mechanics have problems ,they assemble the engine using irregular tightening sequence AND before the engine starts the mains bearings are already strained and such alters the engine oil pressure whats problem...desert mechanics😂😂😂😂😂❤❤❤❤ but kudoos at least they are using the torque wrench for standard strengths ....from centre..diaonally and horizontally,such is inevitablekkkmm
I think your just jealous cause they are showing you a few points
Jari nya kenapa
시동 못걸었는데?? 어설프네
টেপেট।নমর।কত
How much is this work? Is it for free?
You probably just didn't get that memo. Yeah, all industrial sized engine rebuilds are free now. /s
You bozo, of course it's not free. There are thousands of US $$$ in parts alone.
It cost five goats and one young boy...
@@DavidVanHelden1😂😂😂😂😂😂😂
All that work then put old burnt up pistons back in. False economy
Torque specs are for amateurs!😂
Wayyyyyyyyyyyyyyyyyyyy too much sealer!!!
You clowns need a large caulking gun of sealer & double gasket everything! lol
No matter, it will be back within a month if not sooner, smoking it's lungs out & rattling!!
I live in Orange County California most young people are total lazy and bums and do drugs all day and steal from Walmart how can you say anything bad about these guys😂
🤣🤣🤣🤣🤣🤣🤣🤣🤣
I wonder if they have snap-on over there?
How tall gonna fo this kinda work and not get paid enough money to build a proper shop to repair these parts and such in the dirt???
Hmmm, they don't know what the torque wrench is used for! 🤔
A torque wrench to these guys is a cheater pipe and a 200 pound man pushing down with all the muscle he got on the other end.........click....it's good
Sure, sure. I assume you are a westerner?
@@ChuckHickl Hey they have a torque wrench, the're just not using it correctly.
@@stusue9733 your correct, my correct and their correct are 3 different things. they have to keep this stuff running every day while we talk about it. I can overlook a 5 lbs/sq ft torque valuation differentials from feel to gauge and am much more impressed with them doing an entire engine rebuild in primitive conditions to say the least.
@@ChuckHickl Where did I say I wasn't impressed?
It was pointed out that they weren't using the torque correctly and you came out with this "westnerner" garage.
I have no idea what a lbs/sq ft is, perhaps you mean ft-lb?
If you think they got within 5ft-lbs I have a bridge you might like to buy.
It's one thing when they have to make do because they don't have the correct tool, it's something else when they have the correct tool but don't use it correctly.
Yeah nothing about the rebuild was good. It’s the true definition of a scab job.