Custom 1969 Mach 1 Mustang Exhaust Build & Test Drive - Mach 1: Ep. 2
HTML-код
- Опубликовано: 30 сен 2024
- This week we're finishing out our custom exhaust on the 1969 Mach 1 Fastback. You saw us fabricate the long tube headers for this big block to help the motor breathe. Now we're focusing on the sound. We're cutting some some mandrel bends to fabricate a custom x-pipe to route into the Stainless Bros mufflers. We're also welding up custom mounting brackets to make sure those mufflers aren't flopping around underneath the car when cruising down the road. Once the pipes are all welded up and clamped down onto the headers, we're taking this Mustang for a spin! This big block is chirping the tires when shifting through the gears and sounding good doing it. Have questions or comments about the build? Leave them in the comments below! And make sure to subscribe because we have new episodes coming out every week.
Follow us on IG! @SalvagetoSavage
Like what we're wearing? Grab yourself some merch!
Salvage to Savage Gear:
www.salvagetos...
Stainless Bros Materials:
www.stainlessb...
If that O2 sensor is pointed down, as it appears, be prepared to change it regularly. Condensation will kill it.
Solid mount exhaust. I see cracking in it's future due to thermal expansion and contraction.
Sounds great though. No LSD ? No Detroit locker ? With a Big Block ? Duuuuude.
Just for future reference, when priming a engine before first fire like you guys did just now on the mustang, disconnecting the coil was the first right move but you skipped the other, almost more important step, making sure you arent sending fuel through the engine, because without it igniting its all just pooling in the cylinders and washing the walls out messing up ring seal and cross hatch and also if you get enough fuel to wash down it gets in the oil it will destroy your bearings or even a flat tappet cam because gasoline eats the lubricating properties away from the oil etc if you were to not realize it and not drain the oil. Just thought I'd mention it, for all I know there was a electric pump with a switch that was tuned off lol
Really nice MACH 1! That exhaust stuff is so nice compaired to what I built on my 70 MACH 1 25+ yrs ago! I did 2.75in all the way back to supertrap mufflers.You might think about frame connectors in it cause I found flex in mine.Im also putting a heidts mustang 2 in mine with a 3.5 ecoboost now to replace my BUILT Cleveland
Holy crap, I hope you gonna show that Eco swap on RUclips.!
Shut up and take my money!
There is no substitute for pride in your craft. No matter what the finished product may be. Clean the glass , clean it right. Sweep the floor do it to the best of your ability. Take pride in yourself and your work of art you created for future generations to behold, and say wow, they knew their shit. Great Job
Thank you Dan!!
Thank you keeping er FE power
I've never seen an X-pipe like that before.
Cool car! Black hood needs to be matte. The matte hood comes from racedriving to avoid reflection for the driver. A shine black hood makes no sense.
This is an original factory paint car. I doubt he's going to be repainting the hood
Needs a big nasty cam. Has to be lumpy. Kinda quiet. Needs electric cut outs.
There is no other Mustang that can compete with the Mach I for absolute beauty.
Wow,that exhaust is very tidy.I do like watching competent people do there thing.All you guys are professionals.
Thank you so much!
If you mount the muffler solid, how do you deal with exhaust length growth as the system heats up?
Do you back purge the tubes?
Excellent clear clean step by step narrated video of the fabrication, nice clean professional tig welds and use of the level. System looks and sounds GREAT love the road test!! Great job!
Thank you very much!
Love this car
That car looks good (exhaust sounds nice too, lol).
Thank you! There's just something about a classic fastback!
@@SalvagetoSavage Indeed there is.
Mid length headers suck what a waste of time.
No way a one legger. No posi? No no bunk bunk
I want to do exactly what you did on my 69 mustang! Any chance on a list of how many elbows, u bends and straights you used from stainless bros?
It's been such a long time we don't have the order list anymore. You can sort of look at the space you have in the engine bay, preplan your routing a bit, then order a few extra pieces just in case.
@Salvage to Savage yeah its been some time. Thanks for replying though 🙂
Its got no Posi Trac rear.
- woa ,, great vid, great work, sweet stang not disappointed.
Thank you! Glad you liked the video. We got another one coming out next Wednesday!
Awesome content
No posi?......It looked like a one wheel peel
No :( The car is slowly moving away from OEM, but a lot of it is still original. It still has the stock diff, unfortunately.
Stroke 2 Stroke or maybe 2 Strokes garage 😂
Is that what you want us to rename our shop? Not sure why, we and everyone else seems to like our current name
Отличная получилась выхлопная система- лайк !!!
Solid engine mounts on that thing ? Thats fuckin gansgter
Side pipes?
Close! They're turndowns right before the rear axel. If you go to the 8 min mark you'll be able to see exactly where the exhaust ends.
love this channel !
Awesome!
Thank you! Hope you liked the video!