Hey mate, if you slide the bobbin winder right, that disengages the main mechanism, your machine wasn't stuck or broken. When the bobbin is full wound, it pushes itself to the left to re-engage the main mechanism.
Great, I learned how to loosen the motor to get a new lug belt on an 80's Brother VX-940 and many other troubleshooting tips! Hang on to those oldies that were made of all metal, often in Japan. These video help, even if you don't see your exact model. Thanks for engineers who like to take apart everything and figure it out for us!
Oh my gosh! My friend gave me her old swing machine. I was having the same problem so I started following this. Then I started reading the comments. It's "fixed"now. We'll, now I know how to open up my sewing machine too, I guess.
This I'd exactly what I needed to have the confidence to look in my own machine (same model). The belt slipped off the bottom gear put it back on. Oiled well, all os working great, again!
This whole time, it was just the bobbin winder clutch was engaged. It was just to move the bobbin winder shaft to the left to disengage the clutch and the main shaft would re-engage for the sewing machine.
Try disengaging the bobbin winder before needlessly dismantling the machine. That machine isn't supposed to work when the bobbin winder is in that position, which you could clearly see turning at the start. Also you are turning the wheel in wrong direction. Always turn ot anticlockwise.
I was laughing my ass off! He had his hand/fingers right on the lever but never pushed it to the right or left. Belt side of machine on top there are three items coming up out of the top of the machine. The tallest (middle) object is a lever (bobbin winder) and the bobbin winder base, you must move it right and left to actuate the so the needle will go up and down. Machine was not broken and did NOT need any lubricant. I pulled one of these out of the garbage pile to make a guitar pickup winder using only the motor and belt. Thanks for the entertainment.
The clutch is not disengaged. In some machines you have to tighten the belt pulley and in others you have to disengage the bobbin winder to engage the shaft rotation
Thanks for a preview of what I'm about to do with my machine. Except my bobbin winder is in the left position but still not sewing. It sounds like a gear is grinding.
Darle una oportunidad. Toma muchas fotos y videos. Cuando desarmo motores o piezas de automóviles, escribo los pasos en papel a medida que avanzo e incluso pongo cinta adhesiva en el artículo y lo pongo en una bolsa de plástico y cierro la bolsa después de ese artículo y escribo en la bolsa con tinta permanente. . Mira mis videos de motores.
You know what I'd do? Put in in the car and take it over to an old Volkswagen parts supply store and ask a guy over 50 years old. Rationale: Those guys have a LOT of experience taking apart things-they'd probably love to take a look at it and help too! : ).
I have a vx808 . When I slide the bobbin winder right, it does not disengage the main mechanism. The knob on the right will not rotate to disengage the main mechanism. Can this be fixed
No idea. Look to see where the contact is made & if the mechanism moves, spins, or rotates. It could just be very very stuck and need lubricating. Take is slowly, take pictures, and analyze as you go. You might be able to figure it out. I encourage you! : )
I have no idea and I'm not even quite sure what it is you are asking. Try...try posting the issue/problems you seem to be having to move the conversation further-maybe we can help. : )
No se. Le animo a que consiga un destornillador, lápiz y papel, un teléfono completamente cargado, tome fotografías, grabe videos y escriba paso a paso lo que hizo mientras intentaba quitar la cubierta. ¡Creo que puedes hacerlo!
Tengo una máquina igual lamentablemente la preste y no se qué le pasó y no me dijeron nada y ahora que la saqué, pues está muy dura ojalá y me pueda ayudar, mil graci
I have the same machine when sewing the machine won’t pull my material through, I got to pull the material through, is there something wrong with the dogs, is there an adjustment. thank you
I have no idea. If it were me I'd try with thin material and thick material-to see if the results are different. I'd even try sewing together two pieces of paper and then two completely transparent pieces of semi-thick plastic-that way you can see thru the plastic to the foot BELOW the fabric/the bottom foot & see if the bottom foot is doing what it is supposed to be doing, right? Let me know! Interesting! : )
What a mess can’t start it who in the Domican Republic can help me to start it Christmas gift from my granddaughter I’m 84 been using machine s over 60 years
It seems that they have just been released from a madhouse and given a sewing machine in their hands, that it is difficult to buy a syringe to fill it with oil for sewing machines?🤔
It looks like you have no idea about sewing machines. Luckily hou are good with your hands and you did not break a perfectly good sewing machine. Next time start with the users manual. Learn the basics and go to troubleshooting section. All's well that ends well ! I had fun watching !
You are correct, I know little about sewing machines. I did not have the user's manual nor did I have access to the user's manual. I did not have time to learn the basics, I just thought it needed to be oiled. It did and the problem was solved in a round about way. Ha!
Me párese un engaño por qué la máquina cuando el devanados está trabajando la máquina no se mueve. Fíjese que cuando empieza el video donde se llena la bobina está a la derecha se va la imagen y cuando vuelve ya está ala izquierda ja,ja,ja,ja,
At 7min in video I could see that your bobbing winder was engaged, the white spindle is turning. you needed to push it to the left and the needle would then move. At 10min in video when no picture you must off clicked the spindle across because then it moved the needle, rodney you plonker ha ha
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Hey mate, if you slide the bobbin winder right, that disengages the main mechanism, your machine wasn't stuck or broken. When the bobbin is full wound, it pushes itself to the left to re-engage the main mechanism.
Great-plz make a video on how to slide the bobbin winder. Thx.
Keith, I was just getting ready to type the very same thing you did because I have this exact machine when I read your comment.
do you know why humming noise comes singer 1306 just after switching on
You are right on the money Keith.
Great, I learned how to loosen the motor to get a new lug belt on an 80's Brother VX-940 and many other troubleshooting tips! Hang on to those oldies that were made of all metal, often in Japan. These video help, even if you don't see your exact model. Thanks for engineers who like to take apart everything and figure it out for us!
Glad it helped!
Oh my gosh! My friend gave me her old swing machine. I was having the same problem so I started following this. Then I started reading the comments. It's "fixed"now. We'll, now I know how to open up my sewing machine too, I guess.
Good. I'm glad this helped. : )
Thank you!! You helped me fix my sewing machine!!
Glad I could help!
Thank you for sharing. I just fixed mine by watching your video.
Glad it helped
Thank you so much. 11:39 had the solution that worked for me
Good! Yay! : )
This I'd exactly what I needed to have the confidence to look in my own machine (same model). The belt slipped off the bottom gear put it back on. Oiled well, all os working great, again!
YAHOOO! #TeamStephanie ! Stephanie for the win!
Never turn the hand wheel away from you. Always TOWARD you.
Great trouble shooting and useful video. Thanks
Ur welcome!
This whole time, it was just the bobbin winder clutch was engaged. It was just to move the bobbin winder shaft to the left to disengage the clutch and the main shaft would re-engage for the sewing machine.
Good vid. That is how you learn.
Try disengaging the bobbin winder before needlessly dismantling the machine. That machine isn't supposed to work when the bobbin winder is in that position, which you could clearly see turning at the start. Also you are turning the wheel in wrong direction. Always turn ot anticlockwise.
Thx! It was my first time!
U are an angel...
U just saved me thousands of dollars... I love u.... God bless u... Omg
I was laughing my ass off! He had his hand/fingers right on the lever but never pushed it to the right or left. Belt side of machine on top there are three items coming up out of the top of the machine. The tallest (middle) object is a lever (bobbin winder) and the bobbin winder base, you must move it right and left to actuate the so the needle will go up and down. Machine was not broken and did NOT need any lubricant. I pulled one of these out of the garbage pile to make a guitar pickup winder using only the motor and belt. Thanks for the entertainment.
Oh good! I'll look into that! Can you plz make a video & demonstrate that for us? Thanks! I don't know anything about sewing machines!
😂 disengage the bobbin winder no need to tear it apart. Also never turn the hand wheel away from you and always toward you.
You are the....5th person to point that out. Seems like overkill.
This literally just fixed my machine
The clutch is not disengaged. In some machines you have to tighten the belt pulley and in others you have to disengage the bobbin winder to engage the shaft rotation
Looks like the bobbin winder is engaged
yep bobbin winder flip it to the left they both run off the same motor
Please tell me what spray you are putting on that poor machine
3-1 oil anywhere metal touches metal. only a coupl drops or you will have a mess
Ahhh. Thanks!
The reason it would spin without moving everything else was because the bobber filler was in the locked mode to fill
O.O
You don’t turn the wheel on any machine away from you. Turn it forward toward you not away and the belt will stay on.
Thanks for a preview of what I'm about to do with my machine. Except my bobbin winder is in the left position but still not sewing. It sounds like a gear is grinding.
It might not be engaging perfectly. Take a deep look at it.
You have it in bobbin winding mode!! Don't you see the bobbin winding pin spinning?? But thanks for showing us how to take apart the machine!
O.O No I didn't! Thank you very much for pointing that out! : )
Push the bobbin winder over and always turn the wheel toward u
Ty!
Sir you never turn the handwheel away from you. You always turn the handwheel towards you .
Not on the vintage Rotary machines. Those are the best machines.
do you know why humming noise comes singer 1306 just after switching on
Because your sewing machine doesn't know the words.
Kidding. No. Does the machine work, go up and down?
Haber si puedo arreglar la mia😮 es igual y creo tiene el mismo detalle si todo sale bien arreglaré maquinas ❤
Darle una oportunidad. Toma muchas fotos y videos. Cuando desarmo motores o piezas de automóviles, escribo los pasos en papel a medida que avanzo e incluso pongo cinta adhesiva en el artículo y lo pongo en una bolsa de plástico y cierro la bolsa después de ese artículo y escribo en la bolsa con tinta permanente. . Mira mis videos de motores.
Oh great now he’s putting it in the dish washer
I just mutilated my LS 2400. Still can’t figure out what tab to pry open🙆🏻♀️
You know what I'd do? Put in in the car and take it over to an old Volkswagen parts supply store and ask a guy over 50 years old. Rationale: Those guys have a LOT of experience taking apart things-they'd probably love to take a look at it and help too! : ).
I have a vx808 . When I slide the bobbin winder right, it does not disengage the main mechanism. The knob on the right will not rotate to disengage the main mechanism. Can this be fixed
me too
No idea. Look to see where the contact is made & if the mechanism moves, spins, or rotates. It could just be very very stuck and need lubricating. Take is slowly, take pictures, and analyze as you go. You might be able to figure it out. I encourage you! : )
Can someone help me. I need to know what the settings are for this machine cotton material, regular stich.
I have no idea and I'm not even quite sure what it is you are asking. Try...try posting the issue/problems you seem to be having to move the conversation further-maybe we can help. : )
I hope his wife doesn’t really want that machine after he filled it with liquid wrench
What cause the sewing machine not to sew
Does anything move at all?
Cómo destapar una brother XM3700
No se. Le animo a que consiga un destornillador, lápiz y papel, un teléfono completamente cargado, tome fotografías, grabe videos y escriba paso a paso lo que hizo mientras intentaba quitar la cubierta. ¡Creo que puedes hacerlo!
You dont turn the wheel backwards (away from you) only forward.
Why?
You turn it the wrong way , turn it toward yourself
Ah-thank you!
3718 Carmen I have written several times live in the Domaincan Republic please help me get me to use it. Yes I’m 84 and still love sowing
Your bobbin fill is on.
Tengo una máquina igual lamentablemente la preste y no se qué le pasó y no me dijeron nada y ahora que la saqué, pues está muy dura ojalá y me pueda ayudar, mil graci
En Espanol: ruclips.net/video/ui9hgB6Rago/видео.html
This video is so frustrating.
The machine had the bobbin winder mechanism on.
O.O
I have the same machine when sewing the machine won’t pull my material through, I got to pull the material through, is there something wrong with the dogs, is there an adjustment. thank you
I have no idea. If it were me I'd try with thin material and thick material-to see if the results are different. I'd even try sewing together two pieces of paper and then two completely transparent pieces of semi-thick plastic-that way you can see thru the plastic to the foot BELOW the fabric/the bottom foot & see if the bottom foot is doing what it is supposed to be doing, right? Let me know! Interesting! : )
Have to say... This is alas one cheap, bottom of the barrel, full of plastic, basic machine, that is deliberately designed and built NOT to last.
Nolepuedo kitar latapa donde va el foco para aceitarla
Ah. Para remuever para me estaba muy dificile. Mira el video para los butones en el plastico. Cuidado.
What a mess can’t start it who in the Domican Republic can help me to start it Christmas gift from my granddaughter I’m 84 been using machine s over 60 years
Just got 37 18 what a mess😢
Hi. You have a 3718? What brand?
It seems that they have just been released from a madhouse and given a sewing machine in their hands, that it is difficult to buy a syringe to fill it with oil for sewing machines?🤔
I'm new to sewing machine maintenance. :(
It looks like you have no idea about sewing machines.
Luckily hou are good with your hands and you did not break a perfectly good sewing machine.
Next time start with the users manual. Learn the basics and go to troubleshooting section.
All's well that ends well !
I had fun watching !
You are correct, I know little about sewing machines. I did not have the user's manual nor did I have access to the user's manual. I did not have time to learn the basics, I just thought it needed to be oiled. It did and the problem was solved in a round about way. Ha!
Me párese un engaño por qué la máquina cuando el devanados está trabajando la máquina no se mueve. Fíjese que cuando empieza el video donde se llena la bobina está a la derecha se va la imagen y cuando vuelve ya está ala izquierda ja,ja,ja,ja,
Gracias si 👏
En español no inventen todo en inglés
En Espanol: ruclips.net/video/ui9hgB6Rago/видео.html
Please STOP turning the wheel backwards
At 7min in video I could see that your bobbing winder was engaged, the white spindle is turning. you needed to push it to the left and the needle would then move. At 10min in video when no picture you must off clicked the spindle across because then it moved the needle, rodney you plonker ha ha
I will re-watch-! TY!
Google has sensored your video.
Why? There is no cursing at all. Thx.
@@abytc2023 It was a joke; part of the video was blank!
Is this in Spanish any where please 🙏 help me we have a mall and Lama is where I got my frist machine Brother 8 years ago please 🙏 help me. Carmen 😢😢😊
OMG. No!! Don't put that in the dishwasher.
I think it'll be fine. It's all plastic. I've put dirty air vents in the dishwasher instead of washing them all by hand and they were all fine.