Just got my first job In the field start in 2 weeks! Have a construction background but due to an injury I had to switch careers - nervous is an understatement
Good luck Jon, I too entered this field from an entirely different background 6 years ago, so I know how you feel. I've since worked in various decontamination departments. I am now one of the Team Leaders in a Decontamination unit based in the UK. It's a very rewarding job.
@@timl1481 thanks Tim! I’m really looking forward to it! Start the 21st. I have a child with a trach which sparked my interest in the field - and now I just want to hit the ground running
Putting the filter cover back in the casket. You especially should not be doing that since there’s blood in there caskets go through the washer with the filter covers detached.
I was holding it with my other hand. You’re right about my phone being contaminated once I drop it. The videos after this one was recorded with smart glasses that have cameras on them. I realized I couldn’t keep recording videos like this due to risk of exposure so I got the glasses to replace that. Works well in decon since I wear a face shield anyways, glasses being cross contaminated is slim.
Filling the sink with enzymatic solution is a requirement in order to decontaminate the instruments to break down the bioburden it may have. You are correct though, there is a smell from it however it’s hardly noticeable because since you are required to wear a mask in decontam at all times you hardly breathe that in. And I notice that it was pretty empty the moment I pressed the button thought no one realize it 😆
How often do you refer to the IFU's before decontaminating the instruments? Are you generally using the same enzymatic detergent for the most part or have you encountered instruments that required a different cleaning solution?
We look at the instruments IFU’s when we borrow a set from a different campus or if we received a new set for us to use. We have a computer in the decontamination room to check the IFU’s. We generally use the same enzymatic solution for all instruments unless stated otherwise by the IFU. Some instruments for example require hand wash only, like majority of our cable cords. Others require a more concentrated detergent, like decontaminating face shields because of COVID-19. We do this because we are running low on supplies.
Really loved the video but I want to know more about it ! What are the main fonction that are done in the decontamination area I know there is ultrasoun machine after hand waching the tools could you explain more ? Ty
Thank you for watching! I’ll try to make videos for you guys, unfortunately I’ve been pretty busy lately that I haven’t gotten a chance to make more. Yes there is a ultrasonic machine that we put instruments in that are hard to see bioburden like for example the cannulas in the laparoscopic set. Running it in the ultrasonic will eliminate it by using the correct cycle along with the preset temperatures, after that is goes into the normal washer for cleaning and decontamination
Usually in scenarios like this they will look if they have that specific instrument in a peel pack. If for whatever reason they still can’t find it then they will open another set of the SAME set and use THAT instrument. Hope this helps
That’s awesome thats sounds exciting! And with COVID going on. I’d say I still feel protected because in the department we take special precautions now. And everyone wears masks at all times. And before we enter the building we always get screened at the door. I hope you do well on the interview and get the job, good luck!
I wish out sets came back on decon in the original pan like that where I work. I noticed no kickbucket or suction liners to dump also do you not have to. Where i work we have to throw trash out,empty suction liners in the hopper,also dump the dirty linen bag off the case cart.
Joe Rohner yes we do that too. Not every set comes with liners, some have those silicone mats like you see on this video which I prefer because it’s annoying to remove all of them at once especially if those surgical techs don’t remove any of them when they have the time to do it.
I just accepted my college offer for medical device reprocessing. Just a general question. Do you decontaminate different medical sets differently, or is the process pretty much the same for each set? (I know that scopes are decontaminated differently from what I have heard)
Congratulations on the offer! We pretty much decontaminate the sets with the same method UNLESS otherwise stated by the IFU. And yes scopes are processed differently, usually by the sterile processing tech or in some cases by endoscopy which is seperated from SPD. Hope this info helps
Rigid scopes are generally autoclavable and therefore can be sterilised, however flexible endoscopes would be damaged by conventional sterilisation.tempritures and are generally deep cleaned. The exception to this is where a low temp sterilisation process, like hydrogen peroxide gas plasma, can be used. Hope this is of help.
Thank you, I’m glad you like my videos! And to answer your question, no I am not concerned at all because when we’re in decon we are supposed to double glove at all times for double the protection. Till this day I have not gotten a cut at all
Nick I’d say pay real close attention to the staff on how they train you. You’ll probably start off in decon. Which is pretty easy once you get the hang of it. If you have any questions let them know. They like it when you ask questions.
Nick you won’t be. At my facility we just hired a new traveler. I trained him in practically everything and I told him to ask me any questions he has. And he does ask me frequently and honestly I don’t mind. It just shows me that he wants to learn and showing me he’s putting in effort. You got this!
I’m glad the aesculaps be empty broken down and sent in a separate cart ,so all I have to do is load them on the cart and push them through the cart wash.
Hello ! I’ve just applied for the position decontamination technician driver,where I’d be cleaning the equipment then delivering it to and from different hospitals in my area,I’m currently a patient transport driver on an ambulance,do you think this is a good career move? Not looking to be a paramedic 😆
Well based off what I heard. They do make really good money. Not too sure how much they make but I know the pay is good cause I have asked one of those people when I had the opportunity and they said they pay really well. I would certainly think it’s a good career move. I hope this helps
If you’re assigned to a certain area that is usually the area you work throughout your whole shift, unless of course you switch assignments with someone else
quizlet.com/45587512/sterile-processing-study-material-for-certification-exam-flash-cards/ Try using this link, I used this website when I was in school and it helped me a lot hope this helps
@@djxuqyz great observation! Don’t worry it’s only temporary. The aesculap pans and lids will be going through the washer and its set to the correct temperature for proper decontamination
About to start school for my certification. Planning on getting into the job to springboard into Radiology when a slot opens up, would you say sterile processing Tech is a job worth doing? Hows the pacing?
Personally I’d say it’s a great way to get inside the medical field with this job. It’s worth the time your investing in. It’s a good paying job too. Pacing is good too, although that depends on the location and the hospital itself
@@StrainXv oh wow that’s pretty cool. With this job you don’t have to deal with any patients at all. Just decontaminating and sterilizing surgical instruments. This would be perfect for you then!
@@alfonsoromano7389 yes I currently work full time and do the same work every day. Can be overwhelming at times but overall I love being a sterile processing tech. I dont think AI and robots would ever be capable of this job so you should be good on this. And the salary on this job varies on location so can’t really speak on that. As far as living on your own, yes you can make it, although if you had your significant other to help you out it would definitely be much better. I was able to purchase my dream car and purchase my house as well. Very great benefits with this career. I hope this information helps.
You seem alone where you are working. Is it typically like this? I imagine the new techs must need some guidance, even the vets every once in a while. How do you get help if ur alone?
It was a Saturday when I was working in this video. Saturdays in this hospital would be perfect to train new techs and that’s a good question, Ive personally never encountered a situation where I needed help but I guess if I needed help I would call the manager who would be on call that weekend and depending on the situation they can come over and help or they could just help me through the phone.
Cool video. But if I may...when you are done, you remove and dispose of all your "contaminated PPE". But when you are video-taping, and a splash or droplets land on your video-recording device...you are taking it home with you. By taping, you are breaking the chain of regulated PPE which is meant to prevent direct exposure. Catch-22 situation. Good for us to learn. But you may be putting yourself (and the hospital) at risk.
That’s true. I recorded this on my phone, however I did have a waterproof case that even the lenses are covered as well as the charging port. If I didnt have anything protecting it I would be putting myself at risk. Thanks for pointing that out
Review Lounge I live in San Francisco and the hourly salery here where I work is $45 an hour. And if you’re scheduled to work holiday like Christmas for example, that would be double time pay. Hope this helps
@@raxanenglish7439 $45 an hour as permanent staff. As a traveler it’s different, but I do know for a fact that travelers get paid more than regular staff.
Congratulations dude! Are you planning on certifying with IAHCSMM or CBSPD? My advice would be to not get too nervous when they’re training you. It might be overwhelming at first especially with the testing with the machines but then after it will click to you. You’re gonna do great man
@@2thang2 im getting certified with iahcsmm & i have about 2 months of experience already from my internship so i got the hang of it all . Also you remember what your exam consisted of im more concerned of that?
@@eddyhernandez9503 that’s good. I’m also certified with IAHCSMM and they’re great. At first the exam will ask you common sense questions like “what do you do when you drop an instrument on the clean side?” You send it back to decon. Then towards the end it will get a little more specific, like what the temperature should be in the prep/pack area and in the decontamination room. It will also ask you about the spaulding classification system. Which you need to know what instruments/devices are critical, semi-critical and non critical. That’s the part that really messed me up man. Honestly if you study really hard the exam will be pretty easy. Just don’t get too nervous and second guess yourself. You’ll pass it the first time!
I didn’t go to school for Certified Sterile Processing Tech but I am interested I have been doing housekeeping and I want to get out of it how should I start I live in Calabasas California I don’t know even how to take a test and where to go and how much would it be. How do I get started without going to school?
Tracy Kay I don’t think you can get certified without going to school first. You would need to complete the sterile processing program and then take the state exam and once you pass that you are officially certified. It depends where you live but to take the exam it would cost you about $125. Hope this helps
2thang2 thank you for answering my question I keep on getting mixed conflicting answers through the Internet. And no one’s telling me The truth people say that you can take the test without going to school. In some of these videos tell you you don’t have to go to school. Just take the test...
Tracy Kay I think in some places technically you could but I know hospitals are asking for externship hours. Basically hands on training you did at a hospital. You only get into externship with the school. You would need to submit your hours with the hospital your trying to apply for. If you have no experience whatsoever, they’ll probably won’t consider you as a candidate for the job even if your certified UNLESS you know someone who already works in SPD. Hope this information helps
@@rol3219 unfortunately no. Hospitals are now asking to see your certification. They wanna see if you’re certified either through CBSPD or IAHCSMM. I know back in the day it was possible
Tracie Booth Yes, it usually depends if there’s a lot of gross soil and/or heavy bio burden. If they aren’t any visible then usually spraying the instruments will do the trick.
@@Collin212 it’s a machine that uses steam under pressure to kill harmful bacteria, viruses, fungi, and spores on instruments that are placed inside a pressure vessel.
@@Collin212 sterile equipment means medical/surgical supplies, instruments and equipment, both sterile and, are cleaned, prepared, processed, stored, and issued for patient care
@@2thang2 Thank you for the tour though. I myself work in Sterile Services at my local Hospital in UK. I have to say the pay does not reflect what has to be learnt and completed but it's a good job.
What did you even decontaminate? You only showed pulling the surgical instruments out of the rigid containers. That’s all you did! your title does not match the video.
Just enrolled into an online program 4-6 month program only thing I’m worried about is the fact there is. No hands on training with actual instruments . How long was training for you at your current job site
Carlos Duenas my training was 1 month. I think it varies from place to place. My friend is also taking the sterile processing program but he is doing it online. Unfortunately due to the pandemic there will be no hands on training in school only by video which is definitely not the same. Although I think some schools are doing social distancing. It depends on where you live
What about your third basin? You didn’t even fill it up with the reverse osmosis water to show the critical step. This video was actually ridiculous again sorry not sorry.
Just got my first job In the field start in 2 weeks! Have a construction background but due to an injury I had to switch careers - nervous is an understatement
Good luck Jon, I too entered this field from an entirely different background 6 years ago, so I know how you feel. I've since worked in various decontamination departments. I am now one of the Team Leaders in a Decontamination unit based in the UK. It's a very rewarding job.
@@timl1481 thanks Tim! I’m really looking forward to it! Start the 21st. I have a child with a trach which sparked my interest in the field - and now I just want to hit the ground running
Hows it going?
Putting the filter cover back in the casket. You especially should not be doing that since there’s blood in there caskets go through the washer with the filter covers detached.
Why did you remove The integrator right away?
I’m a tattooer and I lost count of how many cross contaminations there were in the first 2 minutes.
theyre gonna go into a big high pressure dishwasher and then a sterilizer, its fine lol
I would no way have surgery if I knew this person cleaned my instruments
Hi I'm also a cssd blogger here in uae, thank you for sharing this informative video.
I would have finished this so fast...
Great video I love your content, you do your job better than anyone I’ve seen on this site, keep up the work 🫡
How r u holding the camera in a non sterile filed? You need two hands to effectively work. What if your phone dropped in the contaminated sets?
I was holding it with my other hand. You’re right about my phone being contaminated once I drop it. The videos after this one was recorded with smart glasses that have cameras on them. I realized I couldn’t keep recording videos like this due to risk of exposure so I got the glasses to replace that. Works well in decon since I wear a face shield anyways, glasses being cross contaminated is slim.
Pretty sure you shouldn't be adding the enzymatic whilst filling the sink, it causes fumes that you'll breathe in.. Though the jug is emtpy.
Filling the sink with enzymatic solution is a requirement in order to decontaminate the instruments to break down the bioburden it may have. You are correct though, there is a smell from it however it’s hardly noticeable because since you are required to wear a mask in decontam at all times you hardly breathe that in. And I notice that it was pretty empty the moment I pressed the button thought no one realize it 😆
What facility is this? It looks pretty up to date.
Otherwise it would have been deleted.
How are you eliza
How often do you refer to the IFU's before decontaminating the instruments? Are you generally using the same enzymatic detergent for the most part or have you encountered instruments that required a different cleaning solution?
We look at the instruments IFU’s when we borrow a set from a different campus or if we received a new set for us to use. We have a computer in the decontamination room to check the IFU’s. We generally use the same enzymatic solution for all instruments unless stated otherwise by the IFU. Some instruments for example require hand wash only, like majority of our cable cords. Others require a more concentrated detergent, like decontaminating face shields because of COVID-19. We do this because we are running low on supplies.
Did that person seriously just bring their phone there that is disgusting 🤮
Why didn’t you put those rigid containers on the car wash rack? I still didn’t understand why you put them through the washer and correctly.
Thanks very much. Nice visual for the trade I'm learning
No problem, hope you enjoyed my videos 😊
Really loved the video but I want to know more about it ! What are the main fonction that are done in the decontamination area I know there is ultrasoun machine after hand waching the tools could you explain more ? Ty
Thank you for watching! I’ll try to make videos for you guys, unfortunately I’ve been pretty busy lately that I haven’t gotten a chance to make more. Yes there is a ultrasonic machine that we put instruments in that are hard to see bioburden like for example the cannulas in the laparoscopic set. Running it in the ultrasonic will eliminate it by using the correct cycle along with the preset temperatures, after that is goes into the normal washer for cleaning and decontamination
What happens if a doctor discovers a missing instrument in a tray during surgery?
Usually in scenarios like this they will look if they have that specific instrument in a peel pack. If for whatever reason they still can’t find it then they will open another set of the SAME set and use THAT instrument. Hope this helps
I'm interviewing for a position next week. Have you felt nervous or more exposed at your job with Covid being an issue?
That’s awesome thats sounds exciting! And with COVID going on. I’d say I still feel protected because in the department we take special precautions now. And everyone wears masks at all times. And before we enter the building we always get screened at the door. I hope you do well on the interview and get the job, good luck!
@@2thang2 Thank you so much for the reply! Fingers crossed it goes well!!!
can you listen to music or a podcast while you work?
reversecowgirl69 yes you can. I always blast music in decon lol
I wish out sets came back on decon in the original pan like that where I work. I noticed no kickbucket or suction liners to dump also do you not have to. Where i work we have to throw trash out,empty suction liners in the hopper,also dump the dirty linen bag off the case cart.
Joe Rohner yes we do that too. Not every set comes with liners, some have those silicone mats like you see on this video which I prefer because it’s annoying to remove all of them at once especially if those surgical techs don’t remove any of them when they have the time to do it.
Nice video hopping to join the course 😀 👍
Damn I wish our case load was like that
I just accepted my college offer for medical device reprocessing. Just a general question. Do you decontaminate different medical sets differently, or is the process pretty much the same for each set? (I know that scopes are decontaminated differently from what I have heard)
Congratulations on the offer! We pretty much decontaminate the sets with the same method UNLESS otherwise stated by the IFU. And yes scopes are processed differently, usually by the sterile processing tech or in some cases by endoscopy which is seperated from SPD. Hope this info helps
Rigid scopes are generally autoclavable and therefore can be sterilised, however flexible endoscopes would be damaged by conventional sterilisation.tempritures and are generally deep cleaned. The exception to this is where a low temp sterilisation process, like hydrogen peroxide gas plasma, can be used. Hope this is of help.
Love your videos very informative. I"m in school now and practicing at nearby hospital. Are you ever concerned about getting cut on dirty instrument?
Thank you, I’m glad you like my videos! And to answer your question, no I am not concerned at all because when we’re in decon we are supposed to double glove at all times for double the protection. Till this day I have not gotten a cut at all
How are you ele
I'm starting my first sterile processing job tomorrow any tips to make a good impression?
Nick I’d say pay real close attention to the staff on how they train you. You’ll probably start off in decon. Which is pretty easy once you get the hang of it. If you have any questions let them know. They like it when you ask questions.
@@2thang2 I just got out of school like not even more than 3 months ago. I don't want to be annoying which is my main concern with asking questions.
Nick you won’t be. At my facility we just hired a new traveler. I trained him in practically everything and I told him to ask me any questions he has. And he does ask me frequently and honestly I don’t mind. It just shows me that he wants to learn and showing me he’s putting in effort. You got this!
@@2thang2 Thanks for the advice
Nick do you like it I’m thinking of taking the class
I’m glad the aesculaps be empty broken down and sent in a separate cart ,so all I have to do is load them on the cart and push them through the cart wash.
That sounds so much simpler! Wish my facility did that lol
Hello ! I’ve just applied for the position decontamination technician driver,where I’d be cleaning the equipment then delivering it to and from different hospitals in my area,I’m currently a patient transport driver on an ambulance,do you think this is a good career move? Not looking to be a paramedic 😆
Well based off what I heard. They do make really good money. Not too sure how much they make but I know the pay is good cause I have asked one of those people when I had the opportunity and they said they pay really well. I would certainly think it’s a good career move. I hope this helps
Clamps and forcipes are close how can sterilization effect on close area????
I put the instruments on the decon stringer for proper cleaning through the washer
@@2thang2 👍...........🇵🇰
So If you schedule to work in decon do you have to work in other dept or stay where you assign to?
If you’re assigned to a certain area that is usually the area you work throughout your whole shift, unless of course you switch assignments with someone else
I enrolled cssd, hope I can pass the CBSPD exam this coming November 2022. Can you help me where to review here in online
quizlet.com/45587512/sterile-processing-study-material-for-certification-exam-flash-cards/
Try using this link, I used this website when I was in school and it helped me a lot hope this helps
So many problems, first why would you stack a lid on a container.
@@djxuqyz great observation! Don’t worry it’s only temporary. The aesculap pans and lids will be going through the washer and its set to the correct temperature for proper decontamination
You are washing containers with the lids on top even though they’re upside down… They should be separated!!!
About to start school for my certification. Planning on getting into the job to springboard into Radiology when a slot opens up, would you say sterile processing Tech is a job worth doing? Hows the pacing?
Personally I’d say it’s a great way to get inside the medical field with this job. It’s worth the time your investing in. It’s a good paying job too. Pacing is good too, although that depends on the location and the hospital itself
@@2thang2 well I've worked in the medical field before as a Medic/EMT. I'm really burnt out on direct patient care but still like the environment.
@@StrainXv oh wow that’s pretty cool. With this job you don’t have to deal with any patients at all. Just decontaminating and sterilizing surgical instruments. This would be perfect for you then!
@@alfonsoromano7389 yes I currently work full time and do the same work every day. Can be overwhelming at times but overall I love being a sterile processing tech. I dont think AI and robots would ever be capable of this job so you should be good on this. And the salary on this job varies on location so can’t really speak on that. As far as living on your own, yes you can make it, although if you had your significant other to help you out it would definitely be much better. I was able to purchase my dream car and purchase my house as well. Very great benefits with this career. I hope this information helps.
You seem alone where you are working. Is it typically like this?
I imagine the new techs must need some guidance, even the vets every once in a while. How do you get help if ur alone?
It was a Saturday when I was working in this video. Saturdays in this hospital would be perfect to train new techs and that’s a good question, Ive personally never encountered a situation where I needed help but I guess if I needed help I would call the manager who would be on call that weekend and depending on the situation they can come over and help or they could just help me through the phone.
what you do with the ridged containers
We put them through the washers as well
How many hours are your shifts? And have your your weekly hours been effected in anyway by covid?
My shift is 8 hours, however due to COVID-19 there is a lot of over time in the department.
Why did you put the filter cover back on when the pan was soiled? They come off / staff anyway when they go through the washer🤷🏼♀️
Cool thanks for showing. I start school in feb 2020
Quietstorm7 that’s good! Hope my videos help out
@@2thang2 yes it did!!!
Cool video. But if I may...when you are done, you remove and dispose of all your "contaminated PPE". But when you are video-taping, and a splash or droplets land on your video-recording device...you are taking it home with you. By taping, you are breaking the chain of regulated PPE which is meant to prevent direct exposure. Catch-22 situation. Good for us to learn. But you may be putting yourself (and the hospital) at risk.
That’s true. I recorded this on my phone, however I did have a waterproof case that even the lenses are covered as well as the charging port. If I didnt have anything protecting it I would be putting myself at risk. Thanks for pointing that out
On somedays do you work by yourself?
Yes on weekends but that’s because there aren’t that many cases on the weekends
Your washing containers with the lids on top even though they’re upside down… They should be separated!!!
I just wanted to know how much is the salary are you getting based on your state
Review Lounge I live in San Francisco and the hourly salery here where I work is $45 an hour. And if you’re scheduled to work holiday like Christmas for example, that would be double time pay. Hope this helps
2thang2 certificate or license?
$45 as a traveler or perm staff?
@@raxanenglish7439 $45 an hour as permanent staff. As a traveler it’s different, but I do know for a fact that travelers get paid more than regular staff.
@@mepierre661 certified
What are you showing us here! You didn’t even wash anything and the sinks. We just saw you throw things away basically.
Do you like it? I’m thinking of buying the book and take the test any tips?
Me Pierre yes I do. It’s a pretty chill job. I’d definitely recommend getting into this field.
It’s the best .
I just got hired on myself but im not certified yet! Ill be working nights any advice?!
Congratulations dude! Are you planning on certifying with IAHCSMM or CBSPD? My advice would be to not get too nervous when they’re training you. It might be overwhelming at first especially with the testing with the machines but then after it will click to you. You’re gonna do great man
@@2thang2 im getting certified with iahcsmm & i have about 2 months of experience already from my internship so i got the hang of it all . Also you remember what your exam consisted of im more concerned of that?
@@eddyhernandez9503 that’s good. I’m also certified with IAHCSMM and they’re great. At first the exam will ask you common sense questions like “what do you do when you drop an instrument on the clean side?” You send it back to decon. Then towards the end it will get a little more specific, like what the temperature should be in the prep/pack area and in the decontamination room. It will also ask you about the spaulding classification system. Which you need to know what instruments/devices are critical, semi-critical and non critical. That’s the part that really messed me up man. Honestly if you study really hard the exam will be pretty easy. Just don’t get too nervous and second guess yourself. You’ll pass it the first time!
@@2thang2 thanks man!
Is this room next to the theatere?
No
I didn’t go to school for Certified Sterile Processing Tech but I am interested I have been doing housekeeping and I want to get out of it how should I start I live in Calabasas California I don’t know even how to take a test and where to go and how much would it be. How do I get started without going to school?
Tracy Kay I don’t think you can get certified without going to school first. You would need to complete the sterile processing program and then take the state exam and once you pass that you are officially certified. It depends where you live but to take the exam it would cost you about $125. Hope this helps
2thang2 thank you for answering my question I keep on getting mixed conflicting answers through the Internet. And no one’s telling me The truth people say that you can take the test without going to school. In some of these videos tell you you don’t have to go to school. Just take the test...
Tracy Kay I think in some places technically you could but I know hospitals are asking for externship hours. Basically hands on training you did at a hospital. You only get into externship with the school. You would need to submit your hours with the hospital your trying to apply for. If you have no experience whatsoever, they’ll probably won’t consider you as a candidate for the job even if your certified UNLESS you know someone who already works in SPD. Hope this information helps
@@2thang2 Can I get hired even though I haven’t take the exam but i finished the program?
@@rol3219 unfortunately no. Hospitals are now asking to see your certification. They wanna see if you’re certified either through CBSPD or IAHCSMM. I know back in the day it was possible
Do you ever decant and prebrush
Tracie Booth Yes, it usually depends if there’s a lot of gross soil and/or heavy bio burden. If they aren’t any visible then usually spraying the instruments will do the trick.
Do you feel like your job is really loud? Like the sterilizing machine? I feel i would get a headache from all the noises
I guess it can get loud from time to time especially the sterilizers. But eventually you’ll get used to it
What is a sterilizing machine
And what does sterile equipment mean?
@@Collin212 it’s a machine that uses steam under pressure to kill harmful bacteria, viruses, fungi, and spores on instruments that are placed inside a pressure vessel.
@@Collin212 sterile equipment means medical/surgical supplies, instruments and equipment, both sterile and, are cleaned, prepared, processed, stored, and issued for patient care
Are you guys hiring? lol 😂 I wouldn’t mind working there.
eddie lujano we will be hiring soon actually. Sometime around March
2thang2 whats the site I would go under?
eddie lujano go to this site, jobs.sutterhealth.org and search sterile processing
Did you do the point of use first ??
The OR
Why did you leave the water running, that’s a waste
I forgot to close the drain in the beginning
Hey how are you recording this ? Thank you
I’m using my iPhone to record this and don’t worry my phone was protected while I was in decon lol
Do you need a degree for this kind of job?
Yes you do. You need to be certified
What facility is this
right they got nice stuff, sterris is the best
Great job considering you have 1 arm...why did you not just wear a Go Pro lol.
Lol that’s what people kept telling me. On my recent videos I’ve used glasses that have a camera on them so I can record hands free
@@2thang2 Thank you for the tour though. I myself work in Sterile Services at my local Hospital in UK. I have to say the pay does not reflect what has to be learnt and completed but it's a good job.
What did you even decontaminate? You only showed pulling the surgical instruments out of the rigid containers. That’s all you did! your title does not match the video.
Just enrolled into an online program 4-6 month program only thing I’m worried about is the fact there is. No hands on training with actual instruments . How long was training for you at your current job site
Carlos Duenas my training was 1 month. I think it varies from place to place. My friend is also taking the sterile processing program but he is doing it online. Unfortunately due to the pandemic there will be no hands on training in school only by video which is definitely not the same. Although I think some schools are doing social distancing. It depends on where you live
والله كل ما اشوف كل شي الي نظيف اتفل على الي عندنا 😐
What about your third basin? You didn’t even fill it up with the reverse osmosis water to show the critical step. This video was actually ridiculous again sorry not sorry.
So many things wrong here....
What exactly did I do wrong??
@@2thang2 EVERYTHING
Wow are u certified? Very unprofessional. You should be retrained.
Is there something I did wrong?
this looks so much fun